Learning Knowledge


Doctorate
2007 - 2013
Yildiz Technical University, Graduate School Of Natural And Applied Sciences, Metallurgical and Materials Engineering/Extractive Metallurgy, Turkey

Postgraduate
2004 - 2007
Yildiz Technical University, Graduate School Of Natural And Applied Sciences, Metallurgical and Materials Engineering/Extractive Metallurgy, Turkey

Undergraduate
2000 - 2004
Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering, Turkey

Foreign Languages

English, C1 Advanced

Dissertations

Doctorate, THE PRODUCTION OF HIGH QUALITY STEELS FROM STEEL SCRAPS BY ELECTROSLAG REMELTING (ESR )AND MODELLING THE PROPERTIES OF SLAGS, Yildiz Technical University, Graduate School Of Natural And Applied Sciences, Metallurgical and Materials Engineering/Extractive Metallurgy, 2013
Postgraduate, PRODUCTION OF COMPOSITE PELLETS AND IRON NUGGETS FROM DİVRİĞİ PELLET CONCENTRATE, Yildiz Technical University, Graduate School Of Natural And Applied Sciences, Metalurji Ve Malzeme Müh/ Üretim, 2007

Academic Titles / Tasks


Assistant Professor
2018 - Continues
Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering

Assistant Professor
2017 - 2018
Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering

Research Assistant PhD
2013 - 2017
Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering

Research Assistant
2007 - 2013
Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering

Supported Projects

  1. GENÇTEN M., YAŞA S., BİROL B., TÜRÜ İ. C., DÖNMEZ K. B., Project Supported by Higher Education Institutions, Atık Li-iyon Pillerden Kobalt Oksitin Elde Edilmesi ve Bu Maddenin Süperkapasitörlerde Elektrot Malzemesi Olarak Kullanımının İncelenmesi, 2023 - Continues
  2. BİROL B., BİLEN A., SARIDEDE M. N., Project Supported by Higher Education Institutions, Nadir Toprak Elementlerinin Mikrodalga Destekli Süreçlerle Geri Kazanımı, 2021 - Continues
  3. Gençten M., Birol B., Türü İ. C., Dönmez K. B., TUBITAK Project, Endüstriyel Ve Organik Atıklardan Geri Dönüştürülen Malzemelerle Bağlayıcı Kullanmadan Yüksek Performanslı Esnek Tip Asimetrik Süperkapasitörlerin Geliştirilmesi, 2023 - 2026
  4. BİROL B., BAYRAK Y., GENÇTEN M., Uğurlu E., Project Supported by Higher Education Institutions, Ferrokrom Üretiminde Açığa Çıkan Baca Tozlarının Sulu Sistemlerdeki Ağır Metal Adsorpsiyon Özelliklerinin İncelenmesi, 2022 - 2024
  5. ALTINBAY A., BİROL B., DUYGULU N., Project Supported by Higher Education Institutions, Karbon Elyafın Etkin Biçimde Yüksek Performanslı Termoplastik Matrise Emdirilmesi, 2021 - 2024
  6. BİROL B., GENÇTEN M., AYDİN O., Project Supported by Higher Education Institutions, Ferrokrom Baca Tozlarından ZnS'ün Geri Kazanılması ve Süperkapasitör Elektrot Malzemesi Olarak Kullanımının Araştırılması, 2022 - 2023
  7. GECÜ R., BİROL B., ÖZCAN M., Project Supported by Higher Education Institutions, AISI 304 Paslanmaz Çelik Yüzeyinde Sol-Gel Yöntemiyle Büyütülen Al2O3-TiO2 Kompozit Kaplamaların Aşınma ve Korozyon Özelliklerinin İncelenmesi, 2022 - 2023
  8. BİROL B., Örücü S., Project Supported by Higher Education Institutions, Toz Metalurjisinde Bor Karbür (B4C) Takviyeli Çift Fazlı (Dupleks) Paslanmaz Çelik Matrisli Kompozit Üretim Araştırması Ve Karakterizasyonu, 2022 - 2023
  9. BİROL B., SARIDEDE M. N., Hatipoğlu U., Project Supported by Higher Education Institutions, Nadir Toprak Elementleri İçeren Çözeltilerin Solvent Ekstraksiyon İşleminin İncelenmesi, 2022 - 2023
  10. BİROL B., Şami S., Project Supported by Higher Education Institutions, Farklı Ortam Koşullarının Termal Bariyer Kaplama Özelliklerine Etkisinin İncelenmesi, 2021 - 2022
  11. Birol B., Maraşlı N., TUBITAK Project, Investigation of the Effect of Solidification Rate on the Mechanical, Electrical and Thermal Properties of Linear Solidified High Mg Containing Al-Mg Based Multiple Eutectic Alloys, 2016 - 2018
  12. BİROL B., Project Supported by Higher Education Institutions, Tufal ve Baca Tozlarının Kompozit Peletlerden Demir Tanesi Üretiminde Hammadde Olarak Kullanımı, 2014 - 2017

Published journal articles indexed by SCI, SSCI, and AHCI

  1. Recovery of cobalt based materials from spent Li-ion batteries and their use as electrode material for supercapacitor
    YAŞA S., BİROL B., Donmez K. B., GENÇTEN M.
    Journal of Energy Storage, vol.81, 2024 (SCI-Expanded)
  2. Kinetics and mechanism of Pb(II), Cd(II) and Cu(II) adsorption on ferrochrome ash from aqueous solutions
    Ugurlu E., AYDIN O., GENÇTEN M., BİROL B.
    International Journal of Environmental Analytical Chemistry, 2024 (SCI-Expanded)
  3. Recycling valuable materials from the cathodes of spent lithium-ion batteries: A comprehensive review
    YAŞA S., AYDIN O., Al-Bujasim M., BİROL B., GENÇTEN M.
    Journal of Energy Storage, vol.73, 2023 (SCI-Expanded)
  4. Influence of layer number and sintering temperature on microstructural, tribological, and corrosion behavior of Al2O3–TiO2 multilayer coatings
    Eraslan F. S., TÜRÜ İ. C., ÖZCAN M., BİROL B., GECÜ R.
    Ceramics International, vol.49, no.20, pp.33226-33235, 2023 (SCI-Expanded)
  5. The potential usage of waste ferrochrome slag in alkali-activated mixes
    Miyan N., Ömür T., Kabay N., Birol B.
    JOURNAL OF BUILDING ENGINEERING, vol.75, no.15, pp.1-19, 2023 (SCI-Expanded)
  6. Direct microwave leaching conditions of rare earth elements in fluorescent wastes
    Bilen A., Birol B., Saridede M., Kaplan Ş., Sönmez M.
    JOURNAL OF RARE EARTHS, no.In Press, Journal Pre-proof, pp.1-15, 2023 (SCI-Expanded)
  7. Production of ZnS based supercapacitor electrode material from ferrochrome ash waste
    Aydın O., Birol B., Gençten M.
    IONICS, vol.29, pp.3335-3352, 2023 (SCI-Expanded)
  8. Removal of Cu(II) Ions from Aqueous Solutions by Ferrochrome Ash: Investigation of Mechanism and Kinetics
    Uğurlu E., Birol B., Gencten M., Bayrak Y.
    Water (Switzerland), vol.15, no.6, 2023 (SCI-Expanded)
  9. Characterization of ferrochrome ash and blast furnace slag based alkali-activated paste and mortar
    Omur T., Miyan N., Kabay N., Birol B., Oktay D.
    CONSTRUCTION AND BUILDING MATERIALS, vol.363, 2023 (SCI-Expanded)
  10. Photocatalytic properties of ZnO nanoparticle coating on porous ceramic substrates with varying porosities produced from fly ash and red mud
    Özcan M., Birol B., Dülger Kutlu Ö., Kaya F.
    International Journal of Applied Ceramic Technology, 2023 (SCI-Expanded)
  11. Recovery of cobalt as CoS from spent Li-ion batteries and investigation of its use as an electrode material for supercapacitors
    Yaşa S., Birol B., Gençten M.
    NEW JOURNAL OF CHEMISTRY, vol.47, pp.6224-6234, 2023 (SCI-Expanded)
  12. Improving wear and corrosion protection of AISI 304 stainless steel by Al2O3-TiO2 hybrid coating via sol-gel process
    Gecü R., Birol B., Özcan M.
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, vol.100, no.6, pp.324-332, 2022 (SCI-Expanded)
  13. Investigation of magnetite concentrate utilization as reinforcement in aluminum matrix composites
    Birol B., Süngü Mısırlıoğlu B., Çakır Ö.
    JOURNAL OF COMPOSITE MATERIALS, vol.56, no.25, pp.3897-3910, 2022 (SCI-Expanded)
  14. Investigation of photocatalytic properties of TiO2 nanoparticle coating on fly ash and red mud based porous ceramic substrate
    ÖZCAN M., BİROL B., KAYA F.
    Ceramics International, vol.47, pp.24270-24280, 2021 (SCI-Expanded)
  15. Investigating the utilization of blast furnace flue dusts and mill scale as raw materials in iron nugget production
    Birol B.
    MATERIALS RESEARCH EXPRESS, vol.6, 2019 (SCI-Expanded)
  16. Estimating the density of molten CaF2-Al2O3-CaO slags based on optical basicity
    Birol B., Saridede M. N.
    MINERALS & METALLURGICAL PROCESSING, vol.33, no.2, pp.82-87, 2016 (SCI-Expanded)
  17. The Effect of Slag Optical Basicity on Alloying Element Losses of Steel by Electroslag Remelting (ESR)
    Birol B., Saridede M. N.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, vol.69, no.3, pp.751-757, 2016 (SCI-Expanded)
  18. Estimation Model for Electrical Conductivity of Molten CaF2-Al2O3-CaO Slags Based on Optical Basicity
    BİROL B., Polat G., Saridede M. N.
    JOM, vol.67, no.2, pp.427-435, 2015 (SCI-Expanded)
  19. Utilization of waste polyethylene terephthalate as a reducing agent in the reduction of iron ore composite pellets
    Polat G., BİROL B., Saridede M. N.
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, vol.21, no.8, pp.748-754, 2014 (SCI-Expanded)
  20. The Effect of Reduction Parameters on Iron Nugget Production From Composite Pellets
    Birol B., Saridede M. N.
    MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, vol.34, no.4, pp.195-201, 2013 (SCI-Expanded)

Articles Published in Other Journals

  1. The Investigation of Mill Scale Utilization as a Reinforcement in Aluminum Matrix Composites
    Birol B.
    Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , vol.15, no.3, pp.1-10, 2023 (Peer-Reviewed Journal)
  2. Investigation of the Carbonization Behavior of Olive Pomace
    Ardıçoğlu H., Süner M., BİROL B., Başman G.
    International Journal of International Journal of Materials and Electronic Devices (JMED), vol.1, no.1, pp.80-83, 2023 (Peer-Reviewed Journal)
  3. Floresan Camlarda Kullanılan Fosfor Tozundaki NTE’lerinin Geri Kazanımının Araştırılması
    Bilen A., Çiftçi H., Sezer R., Birol B., Kavas T.
    Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, vol.19, pp.42-47, 2019 (Peer-Reviewed Journal)
  4. Pre beneficiation of Low Grade Diasporic Bauxite Ore by Reduction Roasting
    YILMAZ K., BİROL B., SARIDEDE M. N., YİĞİT E.
    World Academy of Science, Engineering and Technology, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, vol.9, no.9, pp.1016-1019, 2015 (Peer-Reviewed Journal)
  5. Yüksek Saflığa Sahip Metal Üretiminde Rafinasyon Prosesleri
    Birol B., Sarıdede M. N.
    Metal Dünyası, no.192, pp.94-97, 2009 (Peer-Reviewed Journal)
  6. Demir Dışı Metal ve Atık Endüstrisinde Siklon Reaktörleri
    Sarıdede M. N., Birol B.
    Metalurji, no.151, pp.10-16, 2008 (Peer-Reviewed Journal)
  7. Özel Alüminalar 2 Alüminyum Hidroksit ve Aktif Alüminalar
    Birol B., Sarıdede M. N.
    Metalurji, no.151, pp.15-20, 2006 (Peer-Reviewed Journal)
  8. Özel Alüminalar 1 Kalsine Alüminalar
    Sarıdede M. N., Birol B.
    Metalurji, no.141, pp.25-30, 2005 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

  1. Recovery of Cobalt as CoS from Spent Li-ion Batteries and investigation of Supercapacitor performance of its composite with Cl-doped Graphene Oxide
    YAŞA S., BİROL B., GENÇTEN M.
    7th International Symposium on Materials for Energy Storage and Conversion, Muğla, Turkey, 17 - 21 July 2023, pp.96
  2. PRODUCTION OF A ZnO-BASED SUPERCAPACITOR ELECTRODE MATERIAL RECOVERED FROM THE FERROCHROME ASH WASTE
    YAŞA S., AYDIN O., BİROL B., GENÇTEN M.
    12th AEGEAN ANALYTICAL CHEMISTRY DAYS (AACD2023), İstanbul, Turkey, 19 - 22 October 2023, pp.250-251
  3. RECYCLING OF SPENT LI-ION BATTERIES FOR PRODUCTION OF METAL SULPHIDE AS SUPERCAPACITOR ELECTRODE MATERIAL
    YAŞA S., AYDIN O., BİROL B., GENÇTEN M.
    12th AEGEAN ANALYTICAL CHEMISTRY DAYS (AACD2023), İstanbul, Turkey, 19 - 22 October 2023, pp.106
  4. RECOVERY OF YTTRIUM IN FLUORESCENT PHOSPHOR POWDERS BY SOLVENT EXTRACTION USING CYANEX 272
    Hatipoğlu U., Birol B., Aydın O., Bilen A.
    INTERNATIONAL ISTANBUL MODERN SCIENTIFIC RESEARCH CONGRESS–V, İstanbul, Turkey, 9 - 11 July 2023, pp.259-260
  5. Kobalt Bazlı Sıcak İş Takım Çeliğine Farklı Sıcaklıklarda Uygulanan Kriyojenik İşlemin Mekanik Özelliklere Etkisi
    KİRAZ C., BİROL B.
    9. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, İstanbul, Turkey, 29 April - 01 May 2023
  6. Investigation Of The Heavy Metal Adsorption Properties Of Ferrochrome Flue Dust
    Uğurlu E., BİROL B., GENÇTEN M., BAYRAK Y.
    International Marmara Sciences Congress (Imascon Autumn) 2022 Proceedings Book, Kocaeli, Turkey, 9 - 10 December 2022, pp.38
  7. Investigation And Characterızatıon Of Duplex Staınless Steel Productıon By Mechanıcal Alloyıng Method
    Örücü S., Birol B., Gecü R.
    International Marmara Sciences Congress (Imascon Autumn) 2022, Kocaeli, Turkey, 9 - 10 December 2022, pp.25
  8. Evaluation Of Borax Waste In The Production Of Porous Ceramics
    Metin A., Aydoğdu R., BİROL B.
    International Marmara Sciences Congress (Imascon Autumn) 2022 Proceedings Book, Kocaeli, Turkey, 9 - 10 December 2022, pp.34
  9. Production of Metal Sulfides from Ferrochrome Flue Dusts and Investigation of Their Electrochemical Properties
    Aydın O., Gençten M., Birol B.
    21 International Metallurgy and Materials Congress (IMMC 2022), İstanbul, Turkey, 6 - 08 October 2022
  10. Farklı Ortam Koşullarının Termal Bariyer Kaplama Özelliklerine Etkisinin İncelenmesi
    Şami S., Birol B.
    7. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, İstanbul, Turkey, 16 - 18 April 2022, pp.183-191
  11. Recovery of the Metals Formed as Sludge in Acid Tanks During the Production of Stainless Steel
    Dinçer İ. C., Birol B., Güraydın B., Ekici H., Ay O., Girgin N.
    IX. International Advanced Technologies Symposium, 27 - 28 October 2021, pp.42-48
  12. Elemental Analysis of Alloy Composition Due to the Combination of Alloy and Flux in 6063 Series Aluminum Alloys
    Dinçer M., BİROL B., Ekici H., Güraydın B., Ay O., Dinçer İ. C.
    IX. International Advanced Technologies Symposium, Turkey, 27 - 28 October 2021, pp.20-26
  13. The Effect Of Electro Pickling Parameters On Surface Quality In Stainless Steel Plate Production
    Güraydın B., Birol B., Ay O., Ekici H.
    TURKISH PHYSICAL SOCIETY 37TH INTERNATIONAL PHYSICS CONGRESS, Muğla, Turkey, 1 - 05 September 2021, pp.150
  14. The Effect of B₄C Amount on the Wear Properties of Al-B₄C Composites Obtained by High Energy Ball Milling
    Yaşa S., Kabil A., Birol B.
    20th International Metallurgy and Materials Congress, İstanbul, Turkey, 10 - 12 June 2021, pp.445-448
  15. A Preliminary Study on TiO₂ Coating Deposited on the AISI 2205 by High Energy Ball Milling
    ACAR S., BİROL B., KISASÖZ A.
    20th International Metallurgy and Materials Congress, İstanbul, Turkey, 10 - 12 June 2021, pp.515-518
  16. The Effect of B4₄C Amount on the Wear Properties of Al-B4C Composites Obtained by High Energy Ball Milling
    YAŞA S., KABİL A., BİROL B.
    International Metallurgy and Materials Congress (IMMC2021), Online, Turkey, 10 - 12 June 2021, pp.445-448
  17. A Preliminary Study on TiO2 Coating Deposited on the AISI 2205 by High Energy Ball Milling
    ACAR S., BİROL B., KISASÖZ A.
    International Metallurgy and Materials Congress (IMMC2021), Online, Turkey, 10 - 12 June 2021, pp.511-514
  18. Effect of Fly Ash Filler on Mechanical Performance of E-glass/Polyester Composites
    Bekem A., Birol B., Duygulu N.
    19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Turkey, 25 - 27 October 2018, pp.700-702
  19. EFFECT OF ADDITION FILLER TO PA 12 COATING
    Bekem A., Duygulu N., Birol B.
    4TH INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS 2018), Kyyiv, Ukraine, 2 - 06 May 2018, pp.192
  20. Utilization of Blast Furnace Flue Dust as Reductant for Iron Nugget Production
    Birol B.
    4th International Conference on Materials Science and Nanotechnology for Next Generation (MSNG2017), Sarajevo, Bosnia And Herzegovina, 28 June 2017, pp.102
  21. USING OF WASTE PET (POLYETHYLENE TEREPHTHALATE) AS AN ALTERNATIVE REDUCTANT IN IRON AND STEEL INDUSTRY
    Polat G., BİROL B., Saridede M. N.
    22nd International Conference on Metallurgy and Materials (METAL), Brno, Czech Republic, 15 - 17 May 2013, pp.224-228
  22. RECYCLING OF HIGH QUALITY STEEL SCRAPS DIRECTLY IN ELECTROSLAG REMELTING PROCESS ESR
    BİROL B., SARIDEDE M. N.
    EPD CONGRESS 2011 (Symposium of the Extraction-and-Processing-Division (EPD) held during 140th TMS Annual Meeting and Exhibition), San Diego, CA, United States Of America, 27 February - 03 March 2011, pp.959-965
  23. RECYCLING OF HIGH QUALITY STEEL SCRAPS DIRECTLY IN ELECTROSLAG REMELTING PROCESS (ESR)
    BİROL B., Saridede M. N.
    Symposium of the Extraction-and-Processing-Division (EPD) held during 140th TMS Annual Meeting and Exhibition, California, United States Of America, 27 February - 03 March 2011, pp.959-965
  24. REDUCTION PROPERTIES OF IRON ORE COMPOSITE PELLETS BEARING WASTE PLASTICS
    BİROL B., Saridede M. N.
    Symposium of the Extraction-and-Processing-Division (EPD) held during 140th TMS Annual Meeting and Exhibition, California, United States Of America, 27 February - 03 March 2011, pp.1013-1019
  25. Soğukta Sertleşen Kompozit Peletlerin Mukavemetine Bağlayıcı Türünün Etkisinin İncelenmesi
    BİROL B., BENKLİ Y. E., BOYRAZLI M., SARIDEDE M. N.
    5. Uluslararası İleri Teknolojiler Sempozyumu, Karabük, Turkey, 13 - 15 May 2009, pp.1210-1214
  26. Kompozit Peletlerden Demir Tanesi Üretiminde Bazikliğin Etkisinin İncelenmesi
    BİROL B., SARIDEDE M. N.
    IV. Demir-Çelik Kongresi, Karabük, Turkey, 1 November - 03 January 2007
  27. Hurda Kullanan E.A.F. da Yeni Teknolojiler
    SARIDEDE M. N., Birol B.
    1. Endüstriyel Fırınlar ve Refrakter Sempozyumu, 01 March 2005

Academic and Administrative Experience

2020 - Continues Deputy Head of Department Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering
2017 - 2019 Deputy Head of Department Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering

Courses

C Programlamaya Giriş, Undergraduate, 2016 - 2017
Geri Dönüşüm, Undergraduate, 2017 - 2018
Metalurji Laboratuarı, Undergraduate, 2017 - 2018
Cevher Hazırlama, Undergraduate, 2017 - 2018
Tasarım Uygulamaları, Undergraduate, 2017 - 2018
Üretim Metalürjisi Prensipleri, Undergraduate, 2017 - 2018
Demir-Çelik Teknolojisi, Doctorate, 2017 - 2018
Metalürji ve Malzeme Mühendisliğine Giriş 2, Undergraduate, 2016 - 2017

Advising Theses

Gençten M., Birol B., Kullanılmış Li-iyon Pillerden Kobalt İçeren Bileşiklerin Geri Kazanımının ve Süperkapasitörlerde Elektrot Malzemesi Olarak Kullanımlarının Araştırılması, Doctorate, S.YAŞA(Student), Continues
Birol B., Boyrazlı M., Use of carbonized biowaste instead of fossil fuels used as a reducer for CO2 Emission Reduction in High Carbon Fe-Cr Production, Doctorate, H.Ardıçoğlu(Student), Continues
Birol B., Sönmez M. Ş., Floresan Cam Atıklardan Nadir Toprak Metallerinin Geri Kazanımı, Doctorate, A.BİLEN(Student), Continues
Birol B., Fren Balataları Uygulamalarını Yönelik Bakır Esaslı ve Demir Esaslı Alaşım Sistemlerinin Toz Metalurjisi Yönetimi ile Üretilmesi ve Özelliklerinin İncelenmesi, Doctorate, K.KOÇAK(Student), Continues
Birol B., Ferrokrom Baca Tozlarının Ağır Metal Adsorpsiyon Özelliklerinin İncelenmesi, Postgraduate, E.UĞURLU(Student), 2023
Birol B., Gecü R., Toz metalurjisinde BorKarbür (B4C) takviyeli çift fazlı(dupleks) paslanmaz çelik matrisli kompozit üretim araştırması ve karakterizasyonu, Postgraduate, S.ÖRÜCÜ(Student), 2023
Birol B., Nadir Toprak Elementleri İçeren Çözeltilerin Solvent Ekstraksiyon İşleminin İncelenmesi, Postgraduate, U.HATİPOĞLU(Student), 2023
Birol B., Gençten M., Recycling of ZnS from Wastes and its Utilization as an Electrode Material in Supercapacitors, Postgraduate, O.AYDIN(Student), 2023
Birol B., Yeni nesil (invertör) ve geleneksel MİG/MAG kaynak makinaları ile kaynaklanan S355 kalite çeliğin kaynak dikişlerinin makro yapı ve mekanik özelliklerinin karşılaştırılması, Postgraduate, B.ELEMAN(Student), 2022
Birol B., Improvement of electro-pickling processes in continuousheat treatment process lines of stainless steels, Postgraduate, B.GÜRAYDIN(Student), 2022
Birol B., Farklı ortam koşullarının termal bariyer kaplama özelliklerine etkisinin incelenmesi, Postgraduate, S.ŞAMİ(Student), 2022
Birol B., 6063 Serisi Alüminyum Alaşımında Alaşım Ve Flaks Kombinasyonuna Bağlı Cüruf İçeriğinin Yapısal Ve Elementel Analizi, Postgraduate, M.DİNÇER(Student), 2022

Research Areas

Pyrometallurgy, Metallurgical and Materials Engineering, Production Metallurgy, Non-Ferrous Alloy Production, Iron and Steel Production, Recycling Processes, Engineering and Technology