Learning Knowledge


Doctorate
2006 - 2012
Yildiz Technical University, Graduate School Of Natural And Applied Sciences, Gemi İnşaatı Ve Gemi Makineleri Mühendisliği Bölümü, Turkey

Postgraduate
2003 - 2006
Yildiz Technical University, Graduate School Of Natural And Applied Sciences, Gemi İnşaatı Ve Gemi Makineleri Mühendisliği Bölümü, Turkey

Undergraduate
1998 - 2003
Yildiz Technical University, Faculty Of Mechanical Engineering, Gemi İnşaatı Ve Gemi Makineleri Mühendisliği Bölümü, Turkey

Foreign Languages

English, C1 Advanced

Academic Titles / Tasks


Associate Professor
2020 - Continues
Yildiz Technical University, Naval Architecture And Maritime Faculty, Deparment Of Naval Architecture And Marine Engineering

Assistant Professor
2012 - 2020
Yildiz Technical University, Naval Architecture And Maritime Faculty, Deparment Of Naval Architecture And Marine Engineering

Research Assistant
2004 - 2012
Yildiz Technical University, Naval Architecture And Maritime Faculty, Deparment Of Naval Architecture And Marine Engineering

Supported Projects

  1. ŞENER B., YILDIZ B., DUMAN S., Project Supported by Higher Education Institutions, Su üstü muharip gemilerinin parametrik form tasarımı ve manevra performansının sayısal olarak incelenmesi, 2017 - 2020
  2. ŞENER B., Project Supported by Higher Education Institutions, Yeni Tip Milli Savaş Gemisi Konsepti ve Form Serisi Tasarımı, 2013 - 2017
  3. Zorer Gedik G., Akdağ N., Şener B., TUBITAK Project, Toplu Konut Yerleşimlerinin Rüzgar Ve Gürültü Denetimi Açısından Optimizasyonu, 2012 - 2014
  4. Üst Y., Yurtseven A., Şener B., Ünlügençoğlu K., Project Supported by Higher Education Institutions, Gemilerde Dümen Donanımının Isı Değiştirici Olarak Kullanılmasına Yönelik Dümen Tasarımı Ve Optimizasyonu, 2011 - 2013

Awards

  1. Şener B., HASAT-3 Ar-Ge Proje Pazarı 1.si, Hasan Kalyoncu Üniversitesi, December 2015

Published journal articles indexed by SCI, SSCI, and AHCI

  1. Hydrodynamic optimization of a high-speed vessel by means of simulation-based design methodology
    TİMURLEK H., ŞENER B.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, vol.236, no.4, pp.891-903, 2022 (SCI-Expanded)
  2. A real case study on the selection of suitable roll stabilizer type for motor yachts using hybrid fuzzy AHP and VIKOR methodology
    Demirel H., Şener B., Yıldız B., Balın A.
    OCEAN ENGINEERING, vol.217, 2020 (SCI-Expanded)
  3. A New TOPSIS Methodology Based on Single-Valued Neutrosophic Numbers for Selection of Suitable Roll Stabilizer Type for Motor Yachts
    ŞENER B., BALIN A., YILDIZ B., Demirel H.
    JOURNAL OF SHIP PRODUCTION AND DESIGN, vol.36, no.4, pp.250-258, 2020 (SCI-Expanded)
  4. Application of fuzzy VIKOR method for the evaluation and selection of a suitable tugboat
    Balin A., ŞENER B., Demirel H.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, vol.234, no.2, pp.502-509, 2020 (SCI-Expanded)
  5. A numerical and experimental study on the outrigger positioning of a trimaran hull in terms of resistance
    Yıldız B., Şener B., Duman S., Datla R.
    OCEAN ENGINEERING, vol.198, 2020 (SCI-Expanded)
  6. GenYacht: An interactive generative design system for computer-aided yacht hull design
    Khan S., Günpınar E., ŞENER B.
    OCEAN ENGINEERING, vol.191, 2019 (SCI-Expanded)
  7. AN INTEGRATED FUZZY MCDM MODEL FOR EVALUATION AND SELECTION OF A SUITABLE TUGBOAT
    Balin A., ŞENER B., Demirel H.
    INTERNATIONAL JOURNAL OF MARITIME ENGINEERING, vol.161, 2019 (SCI-Expanded)
  8. NUMERICAL AND EXPERIMENTAL CALCULATION OF ROLL AMPLITUDE EFFECT ON ROLL DAMPING
    YILDIZ B., ŞENER B., YURTSEVEN A., Katayama T.
    BRODOGRADNJA, vol.70, no.2, pp.1-15, 2019 (SCI-Expanded)
  9. APPLYING A FUZZY-AHP FOR THE SELECTION OF A SUITABLE TUGBOAT BASED ON PROPULSION SYSTEM TYPE
    Çakıroğlu G., Şener B., Balin A.
    BRODOGRADNJA, vol.69, pp.1-13, 2018 (SCI-Expanded)
  10. Effect of mass housing settlement type on the comfortable open areas in terms of noise
    Akdag N., Gedik G., Kiraz F., Şener B.
    ENVIRONMENTAL MONITORING AND ASSESSMENT, vol.189, no.10, 2017 (SCI-Expanded)
  11. EVALUATION OF MASS HOUSING SETTLEMENTS IN TERMS OF WIND AND NOISE CONTROL: ISTANBUL AND DIYARBAKIR AS A CASE
    Zorer Gedik G., Yugruk Akdag N., Kiraz F., Şener B., Çaçan R.
    JOURNAL OF ENVIRONMENTAL ENGINEERING AND LANDSCAPE MANAGEMENT, vol.25, pp.389-401, 2017 (SCI-Expanded)
  12. A parametric study on seakeeping assessment of fast ships in conceptual design stage
    Ozum S., ŞENER B., YILMAZ H.
    OCEAN ENGINEERING, vol.38, no.13, pp.1439-1447, 2011 (SCI-Expanded)

Articles Published in Other Journals

  1. Autonomous Network System with Specialized and Integrated Multi-Sensor Technology for Dynamic Monitoring of Marine Pollution (SMARTPOL)
    Vardar N., Bayram B., Mishra A., Palade M., Şener B., Boujmil I., Scerri J., Attard A., Demir I.
    Journal of Eta Maritime Science, vol.11, no.3, pp.217-220, 2023 (ESCI)
  2. Bir Yük Gemisi Formunun Parametrik Olarak Modellenmesi ve Çok Amaçlı Optimizasyonu
    Timurlek H., Şener B.
    European Journal of Science and Technology, vol.1, no.1, pp.105-113, 2020 (Peer-Reviewed Journal)
  3. Comparative Investigation of Crane Effect on Intact Stability Criteria for Ships
    ÖZEN O., ŞENER B.
    International Journal of Engineering Trends and Technology, vol.67, no.6, pp.13-17, 2019 (Scopus)
  4. The Use of Additive Manufacturing in Maritime Industry
    TAŞ Ş. O., ŞENER B.
    International Journal of Engineering Trends and Technology (IJETT), vol.67, no.6, pp.47-51, 2019 (Scopus)
  5. LCG Effects on Resistance, Lift and Trim Characteristics of R/V Athena Hull
    Duman S., Şener B., Bal Ş.
    International Journal of Small Craft Technology, vol.160, pp.43-55, 2018 (Peer-Reviewed Journal)
  6. THE RENEWABLE ENERGY POTENTIAL OF TURKISH COASTS AND A CONCEPT DESIGN OF A NEAR SHORE SEA PLATFORM
    ŞENER B., Aytac S.
    JOURNAL OF THERMAL ENGINEERING, vol.3, no.3, pp.1211-1220, 2017 (ESCI)
  7. Parametric Design of a Surface Combatant For Simulation-Driven Design and Hydrodynamic Optimization
    ŞENER B.
    International Journal ofMechanical and Production Engineering, vol.4, pp.125-129, 2016 (Peer-Reviewed Journal)
  8. UTILIZATION OF SHIPBOARD AS A HEAT EXCHANGER IN SHIP CENTRAL COOLING SYSTEM
    YURTSEVEN A., ÜST Y., ŞENER B., KINACI Ö. K.
    Sigma Journal of Engineering and Natural Sciences, no.34, pp.1-2, 2016 (ESCI)
  9. Bir Suüstü Savaş Gemisi Formunun Hesaplamalı Akışkanlar Dinamiği Yöntemleriyle Optimizasyonu
    ŞENER B., YILMAZ T.
    YTÜ Sigma Mühendislik ve Fen Bilimleri Dergisi, vol.30, no.3, pp.350-363, 2012 (Peer-Reviewed Journal)
  10. Kabotaj Hattı ve İç Sularımızdaki Yolcu ve Araç Taşımacılığı
    ŞENER B., ÇELEBİ U. B.
    Mersin Deniz Ticareti Dergisi, vol.1, pp.59-62, 2012 (Non Peer-Reviewed Journal)
  11. A concept ferry design for Istanbul seaway transport
    ŞENER B.
    Annual Scientific Journal of Ovidius University, Mechanical Engineering Series, vol.12, no.1, pp.25-28, 2010 (Peer-Reviewed Journal)
  12. Resistance prediction of a high speed craft by using CFD
    SADIK Ö., ŞENER B., ÜNLÜGENÇOĞLU K.
    Annual Scientific Journal of Ovidius University, vol.1, pp.305-308, 2010 (Peer-Reviewed Journal)
  13. Wind flow analysis around a chemical factory by using CFD
    ŞENER B., YAVUZ HAKAN Ö., ZORER GEDİK G., YILMAZ T.
    Annual Scientific Journal of Ovidius University, vol.1, pp.120-123, 2010 (Peer-Reviewed Journal)
  14. Türkiye Karasularında Petrol Sızıntısı Tehlikesine Karşın Petrol Temizleme Gemisi İhtiyacı ve Petrol Temizleme Gemisi Dizayn Gerekleri
    TÜRKMEN S., ŞENER B., ARIKAN ÖZDEN Y.
    Gemi ve Deniz Teknolojisi Dergisi, vol.1, pp.7-12, 2010 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

  1. ModiYacht: Intelligent CAD Tool for Parametric, Generative, Attributive and Interactive Modelling of Yacht Hull Forms
    Khan S., GÜNPINAR E., DOĞAN K. M., ŞENER B., Kaklis P.
    SNAME 14th International Marine Design Conference, Canada, 26 June 2022
  2. Bir Yük Gemisi Formunun Parametrik Olarak Modellenmesi ve Çok Amaçlı Optimizasyonu
    TİMURLEK H., ŞENER B.
    ARACONF 2020 International Conference On Access To Recent Advances In Engineering And Digitalization, 5 - 07 March 2020
  3. Bulbous bow optimization of KCS in terms of partially parametric modeling
    ŞENER B., YILDIRIM M. E.
    ICRIET 2018 International Conference on Recent Innovations in Engineering and Technology, Paris, France, 12 - 13 June 2018, vol.1, pp.57-61
  4. The Use of Virtual Reality in Yacht Design and Visualization
    ŞENER B., BEŞLİ O.
    INT-NAM 2018, 3rd International Naval Architecture and Maritime Symposium, 24 - 25 April 2018, vol.1, pp.267-276
  5. A trim optimisation of an eights racing shell using towing tank and computational fluid dynamics methods
    Türkmen S., ŞENER B., Yazıcı U. B., Atlar M.
    INT-NAM 2018 3rd International Naval Architecture and Maritime Symposium, İstanbul, Turkey, 24 April 2018, vol.1
  6. Performance Prediction of a Planing Vessel Using Dynamic Overset Grid Method
    DUMAN S., ŞENER B., BAL Ş.
    11th SYMPOSIUM ON HIGH SPEED MARINE VEHICLES, Napoli, Italy, 25 October 2017, no.10, pp.1-10
  7. Hydrodynamic Optimization of a Ship Hull via Simulation-Driven Design Method
    ŞENER B.
    ICMAE 2017 International Conference on Mechanical and Aerospace Engineering, Roma, Italy, 23 - 24 June 2017, vol.1, pp.25-29
  8. Determination of the Resistance of a Displacement Type Hull Form by means of Different CFD Solvers
    ÇETİN E., ŞENER B., YILDIZ B.
    II. Maritime Conference on Innovation in Marine Technology and the Future of Maritime Transportation, 24 - 25 October 2016, vol.1, pp.160-168
  9. Fully Parametric Hull Form Modeling for Further Systematic Investigations
    ÖZÜM S., ŞENER B., YILMAZ H.
    II. Maritime Conference on Innovation in Marine Technology and the Future of Maritime Transportation, İstanbul, Turkey, 24 - 25 October 2016, vol.1, pp.1-10
  10. Partially Parametric Modification of a Fast Patrol Boat Hull Form for Bow Optimization
    YAZICI B. U., ŞENER B., ÖZDEN S.
    II. Maritime Conference on Innovation in Marine Technology and the Future of Maritime Transportation, İstanbul, Turkey, 24 - 25 October 2016, vol.1, pp.180-189
  11. An Automated Methodology for Multi objective Optimization of Hull Forms
    ŞENER B., YILMAZ T.
    ISITES2015, 3RD INTERNATIONAL SYMPOSIUM ON INNOVATIVE TECHNOLOGIES IN ENGINEERING AND SCIENCE, Valencia, Spain, 3 - 05 June 2015, vol.1, pp.1131-1140
  12. Determination of Comfortable Outdoor Spaces in Mass-Housing Settlements in terms of Wind And Noise Control
    AKDAĞ N., Kiraz F., ZORER GEDİK G., ŞENER B., Çaçan R.
    II International Congress of Architecture Innovative Approaches in Architecture and Planning, Konya, Turkey, 14 November 2014, pp.19-30
  13. Toplu Konut Yerleşmelerinde Rüzgar ve Gürültü Açısından Uygun Kullanım Alanlarının Belirlenmesi
    ZORER GEDİK G., YÜĞRÜK AKDAĞ N., ÇAÇAN R., ŞENER B.
    Yapı Fiziği Derneği, 01 March 2014, vol.1, pp.299-308
  14. Toplu Konut Yerleşimlerinin Rüzgar ve Gürültü Denetimi Açısından Değerlendirilmesi
    YÜĞRÜK AKDAĞ N., ZORER GEDİK G., ÇAÇAN R., ŞENER B.
    Türk Akustik Derneği, 01 December 2013, vol.1, pp.284
  15. Toplu Konut Yerleşimlerinin Rüzgar ve Gürültü Denetimi Açısından Optimizasyonu
    ZORER GEDİK G., AKDAĞ N., ŞENER B., Kiraz F., Çaçan R.
    2. Ar-Ge Proje Pazarı, Enerji ve Çevre Teknolojileri, YTÜ, Proje Destek Ofisi, İstanbul, 01 May 2012
  16. Design for energy efficiency: Simulation-driven design and hydrodynamic optimization for greener ships and EEDI compliance
    BRENNER M., ŞENER B.
    INT-NAM 2011, First International Symposium on Naval Architecture and Maritime, İstanbul, Turkey, 24 October 2011, vol.1, no.1, pp.125-135
  17. Mevcut Bir Teknenin Stabilite Problemlerinin Analizi ve Uygun Çözüm Yöntemlerinin Belirlenmesi
    SADIK Ö., ŞENER B., YILMAZ H.
    Gemi İnşaatı ve Deniz Teknolojisi Teknik Kongresi, İstanbul, Turkey, 24 - 25 November 2008, vol.1, pp.111-117
  18. The Position of YTU in Maritime Education of Turkey
    ŞENER B., ÇAĞAN D., YILMAZ H.
    IMLA International Maritime Lecturers' Association 16th Conference on MET, İzmir, Turkey, 14 - 17 October 2008, vol.1, pp.355-359
  19. The EU Policies for Small Crafts and Impact on Turkish Small Craft Manufacturing and Operations
    TÜRKMEN S., ÇELEBİ U. B., ŞENER B.
    An International Conference on Small Craft Related Sciences&Engineering, Muğla, Turkey, 16 - 18 November 2006
  20. A Control System for Diving of a Underwater Vehicle
    ALTUNSARAY E., ALARÇİN F., ŞENER B.
    An International Conference on Small Craft Related Sciences&Engineering, Muğla, Turkey, 16 - 18 November 2006
  21. A control system for diving of an underwater vehicle
    Altunsaray E., ŞENER B., ALARÇİN F.
    Small Craft, İzmir, Turkey, 16 November 2006, pp.131-137
  22. Kabotaj Hattı ve İç Sularımızdaki Mevcut Durum Gelecek Tasarımları
    ŞENER B., ÇELEBİ U. B., EKİNCİ S.
    Gemi Mühendisliği ve Sanayimiz Sempozyumu, İstanbul, Turkey, 24 - 25 December 2004, vol.1, pp.294-300

Academic and Administrative Experience

2019 - Continues Coordinator of The Rectorate Yildiz Technical University, Naval Architecture And Maritime Faculty, Deparment Of Naval Architecture And Marine Engineering
2015 - Continues Assistant Manager of Research and Application Center Yildiz Technical University, Naval Architecture and Maritime Faculty, Deparment of Naval Architecture and Marine Engineering
2019 - 2020 Fakülte Kurulu Üyesi Yildiz Technical University, Naval Architecture And Maritime Faculty, Deparment Of Naval Architecture And Marine Engineering
2016 - 2018 Coordinator of The Rectorate Yildiz Technical University, Naval Architecture and Maritime Faculty, Deparment of Naval Architecture and Marine Engineering
2014 - 2016 Deputy Head of Department Yıldız Teknik Üniversitesi, Naval Architecture and Maritime Faculty, Gemi İnşaatı Ve Gemi Makineleri Mühendisliği Bölümü

Activities in Scientific Journals

Journal of Thermal Engineering, Assistant Editor/Section Editor, 2017 - Continues

Metrics





Research Areas

Naval Architecture and Marine Engineering, Ship Construction, Engineering and Technology

Entrepreneurship Activities

Limited, Nabla VR, 05 December 2017, Co-Founder