Learning Knowledge


Doctorate
2008 - 2012
Tohoku University, Graduate School Of Engineering, Materials Science, Japan

Postgraduate
2006 - 2008
Istanbul Technical University, Kimya-Metalürji Fakültesi, Metalürji Ve Malzeme Mühensiliği, Turkey

Undergraduate
2001 - 2006
Istanbul Technical University, Kimya-Metalürji Fakültesi, Metalürji Ve Malzeme Mühensiliği, Turkey

Foreign Languages

Japanese, A2 Elementary
English, C2 Mastery

Dissertations

Doctorate, Improvement of Mechanical Biocompatibility of Biomedical ß-type Titanium Alloys through High Pressure Torsion, Tohoku University, Graduate School Of Engineering, Materials Science, 2012
Postgraduate, Titanyum ve Titanyum Alaşımlarının Yüzey Özelliklerinin Plasma (İyon) Nitrürleme ile Geliştirilmesi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalürji Ve Malzeme Mühendisliği, 2008

Academic Titles / Tasks


Assistant Professor
2015 - Continues
Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering

Research Assistant PhD
2012 - 2015
Tohoku University, Institute For Materials Research, Biomaterials

Research Assistant
2008 - 2012
Tohoku University, Institute For Materials Research, Biomaterials

Supported Projects

  1. YILMAZER H., HERMAWAN H., GÜNAY BULUTSUZ A., YILMAZER Y., BASİT S., DİKİCİ B., Project Supported by Higher Education Institutions, Kemik Aşılama Tedavisinde Yönlendirilmiş Doku Rejenerasyonu İçin Biyobozunur Çinko Esaslı Alaşımların Üretimi ve Geliştirilmesi, 2022 - Continues
  2. YILMAZER H., Kocakuşaklı E., Project Supported by Higher Education Institutions, Toz Yataklı 3 Boyutlu Elektron Işını ile Ergitme Yazım Teknolojisiyle TiAl Alaşımlarının Üretimi ve Karakterizasyonu, 2021 - Continues
  3. Yılmazer H., Sadıkoğlu H., Berber H., Yılmazer Y., Research Project of the Presidency of Turkey Health Institutes (TÜSEB), Yanık Tedavisi için Sığla Ağacından Şikimik Asit Extraktı ve ZnO Nanopartikül ile Fonksiyonlandırılmış Doku İskelelerinin 3B Yazıcı Teknolojileri ile Geliştirilmesi, 2023 - 2024
  4. Yılmazer H., Günay Bulutsuz A., Üstündağ C. B., Arısan E. D., Karahan S., Türk M., Karslı B., TÜBİTAK International Bilateral Joint Cooperation Program Project, Innovative Biodegradable Zinc Based Materials and Implants for Pediatric Orthopedic Applications’, 2021 - 2024
  5. Günay Bulutsuz A., Yılmazer H., TÜBİTAK International Bilateral Joint Cooperation Program Project, Yeni Nesil Ultra İnce Taneli Biyobozunur Üreteral Stentlerin Üretimi ve Karakterizasyonu, 2021 - 2024
  6. Yılmazer H., TÜBİTAK International Bilateral Joint Cooperation Program Project, Investigation on fabrication and characterization of novel ultrafine grained biodegradable ureteral stents, 2021 - 2024
  7. YILMAZER H., Alkuş G., Project Supported by Higher Education Institutions, Manganlı Çelik Borularda Kaynak Parametrelerinin Kaynak Akışına Mikroyapıya ve Mekanik Özelliklere Etkisinin Araştırılması, 2022 - 2023
  8. YILMAZER H., ÖZDEN E., Project Supported by Higher Education Institutions, AISI 4140 Çeliğinin Boru Sıvama Yöntemi Sırasında Mikroyapı ve Tekstür Yapısının Gelişimi, 2021 - 2022
  9. Yılmazer H., Ünek M., Aksakal B., TUBITAK Project, Biyobozunur Zn-Cu-Ag Alaşımlar Üzerinde Haddeleme ve Tavlama Isıl İşlem Parameterelerinin Etkisinin İncelenmesi, 2020 - 2021
  10. Yılmazer H., Maraşlı N., Birsen D., TUBITAK Project, Cu, Mn, Ni, Fe, Al, Cr, Ti Elementleriyle Oluşturulacak Yüksek Entropi Alaşım Sisteminin Bilgisayar Ortamında Modellenmesi ve Dislokasyon Hareketlerinin Analizi İle Geliştirilmesi, 2020 - 2021
  11. Yılmazer H., Gündoğdu N., Aksakal B., TUBITAK Project, Mikronano Mimari Yüzeye Sahip Biyobozunur Çinko Esaslı İmplantların Anodik Oksidasyon Yöntemi ile Geliştirilmesi ve Karakterizasyonu, 2020 - 2021
  12. Yılmazer H., Günay Bulutsuz A., Dikici B., Arısan E. D., Taşpınar M., Project Supported by Higher Education Institutions, Kemik defekt tedavilerinde kullanılacak ideal biyobozunurluk ve yüksek mukavemet sergileyen biyobozunur nanokompozitlerin geliştirilmesi ve in vitro karakterizasyon çalışmaları, 2018 - 2021
  13. Yılmazer H., Kök H., TUBITAK Project, Psoriasis Tedavisinde Probolis İçerikli Yara Örtüsü, 2019 - 2020
  14. YILMAZER H., Project Supported by Higher Education Institutions, Nano Taneli Co-Cr-Mo İmplantların Aşırı Plastik Deformasyon (APD) Yöntemiyle Üretimi ve Geliştirilmesi, 2016 - 2020
  15. Nıınomı M., Other International Funding Programs, Lokal deformasyonla elastiklik modulu kontroluyle biyomedikal titanyum alaşımların iyileştirimesi (Japonca'dan çeviri), 2015 - 2020
  16. Yılmazer H., Kütük B., TUBITAK Project, Antibakteriyel Biyobozunur Alaşım Tasarımı ve Geliştirilmesi, 2018 - 2019
  17. Yılmazer H., Kayalıdağ C., TUBITAK Project, 3B boyutlu biyobasım yazıcısı için hastaya özgü biyomedikal iskele implant modellemesi ve prototipinin üretilmesi, 2018 - 2019
  18. Yılmazer H., Aydoğan A., TUBITAK Project, 3 Boyutlu Biyobasım Yazıcısı İçin Hastaya Özgü Biyomedikal İskele İmplant Modellemesi ve Prototipin Üretimi, 2018 - 2019
  19. Yılmazer H., Arslanyan D., TUBITAK Project, Çinko esaslı biyobozunur iskele implantların geliştirilmesi, 2018 - 2019
  20. Yılmazer H., TUBITAK Project, Yüksek performanslı nano-yapılı Co-Cr-Mo implantların yüksek basınç altında burma (YBB) yöntemiyle üretimi ve geliştirilmesi, 2017 - 2019
  21. YILMAZER H., KÖKLÜ H., Project Supported by Higher Education Institutions, Yüksek Performanslı Nano Taneli Bakır ve Bakır Alaşımlarının Yüksek Basınç Altında Burma Prosesiyle Geliştirilmesi, 2016 - 2019
  22. Yılmazer H., Nıınomı M., Other International Funding Programs, Yeni Nesil Biyomedical Titanyum Alaşımların Araştırılması ve Geliştirilmesi (Japonca'dan çeviri), 2013 - 2018
  23. Yılmazer H., Yılmaz Y. B., TUBITAK Project, Yarı otomatik parlatma cihazı geliştirilmesi, 2016 - 2017
  24. YILMAZER H., Other International Funding Programs, Lokal deformasyonla elastiklik modülü kontrolüyle biyomedikal titanyum alaşımların iyileştirilmesi Japonca, 2013 - 2015
  25. Yılmaz Ş., TUBITAK Project, Yüksek Performanslı Vidalı Diş İmplant İmalatı, 2006 - 2009

Awards

  1. Basit S., Yılmazer H., Best Paper Award, Virtual International Scientific Conference On “Applications Of Chemistry İn Nanosciences And Biomaterials Engineering” Nanobiomat 2023, June 2023
  2. Yılmazer H., Arısan E. D., Poster Ödülü, Functional Surfaces And Interfaces Workshop, Sabancı Üniversitesi, December 2018
  3. Yılmazer H., Dikici B., Nıınomı M., Nakaı M., Işık M. D., Horıta Z., Certificate of Awards: Third Prize , 20Th International Esaform Conference On Materials Forming (Esaform 2017), April 2017
  4. Yılmazer H., Nakai M., Best Poster Presentation For Young Scientists, International Symposium Of Materials Integration In Conjunction With The 2Nd International Symposium On Advanced Synthesis And Processing Technology For Materials, Japonya, 2011, December 2011

Jury Memberships

Doctorate, Doctorate, İstanbul Teknik Üniversitesi, January, 2021
PhD Thesis Monitoring Committee Member, PhD Thesis Monitoring Committee Member, İstanbul Teknik Üniversitesi, August, 2020
Doctorate, Doctorate, Yıldız Teknik Üniversitesi, August, 2020
Post Graduate, Post Graduate, Yıldız Teknik Üniversitesi, July, 2020
Post Graduate, Post Graduate, İstanbul Teknik Üniversitesi, June, 2020
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, March, 2020
Doctorate, THERMO-MECHANICAL BEHAVIOR OF SEVERELY DEFORMED TITANIUM, Özyeğin Üniversitesi, June, 2017
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, February, 2017
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, December, 2016
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, December, 2016

Designed Lessons

Yılmazer H., Diffraksiyon Tekniği ile Malzemelerin Karakterizasyonu, Postgraduate, 2016 - 2017

Published journal articles indexed by SCI, SSCI, and AHCI

  1. An investigation over microstructure and HIP processing effects on wear performance of pure chromium parts fabricated by laser powder bed fusion
    GÜNAY BULUTSUZ A., Gulec B., Gokcekaya O., Gardstam J., Nakano T., YILMAZER H.
    International Journal of Refractory Metals and Hard Materials, vol.120, 2024 (SCI-Expanded)
  2. Microstructural evolution and intermetallic formation in Zn-3Mg (wt%) powder mixture processed by high-pressure torsion
    Rahman T., Yılmazer H., Dikici B., Edalati K., Poplawsky J. D., Boehlert C. J.
    Journal of Alloys and Compounds, vol.968, 2023 (SCI-Expanded)
  3. A comprehensive study on microstructure, in-vitro biodegradability, bacterial sensitivity, and cellular interactions of novel ternary Zn-Cu-xAg alloys for urological applications
    Yılmazer H., Basit S., Şen A., Yilmazer Y., Dalbayrak B., Arisan E., Arisan S., Islamgaliev R., Dikici B.
    Journal of Alloys and Compounds, vol.965, 2023 (SCI-Expanded)
  4. In-vitro corrosion and surface properties of PVD-coated β-type TNTZ alloys for potential usage as biomaterials: Investigating the hardness, adhesion, and antibacterial properties of TiN, ZrN, and CrN film
    Ali L., Dikici B., Aslan N., Yilmazer Y., Şen A., Yılmazer H., Niinomi M.
    Surface and Coatings Technology, vol.466, 2023 (SCI-Expanded)
  5. Effect of Plastic Deformation on the Structure and Mechanical Properties of the Zn-4Ag-1Cu Zinc Alloy
    Khafizova E., Fakhretdinova E., Islamgaliev R., Polenok M., Sitdikov V., Yılmazer H.
    Materials, vol.16, no.13, 2023 (SCI-Expanded)
  6. Investigation of the Influence of High-Pressure Torsion and Solution Treatment on Corrosion and Tribocorrosion Behavior of CoCrMo Alloys for Biomedical Applications
    YILMAZER H., Caha I., DİKİCİ B., Toptan F., IŞIK M., Niinomi M., Nakai M., Alves A. C.
    Crystals, vol.13, no.4, 2023 (SCI-Expanded)
  7. Corrosion response and biocompatibility of graphene oxide (GO)–serotonin (Ser) coatings on Ti6Al7Nb and Ti29Nb13Ta4.6Zr (TNTZ) alloys fabricated by electrophoretic deposition (EPD)
    Oktay A., YILMAZER H., Przekora A., Yilmazer Y., Wojcik M., DİKİCİ B., ÜSTÜNDAĞ C. B.
    Materials Today Communications, vol.34, 2023 (SCI-Expanded)
  8. Selenium and clarithromycin loaded PLA-GO composite wound dressings by electrospinning method
    Ciftci F., Ayan S., DUYGULU N., Yilmazer Y., Karavelioglu Z., Vehapi M., Koc R., ŞENGÖR M., YILMAZER H., ÖZÇİMEN D., et al.
    INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS, vol.71, no.12, pp.898-909, 2022 (SCI-Expanded)
  9. A systematic study of β-type Ti-based PVD coatings on magnesium for biomedical application
    Zarka M., DİKİCİ B., Niinomi M., EZİRMİK K. V., Nakai M., YILMAZER H.
    Vacuum, vol.183, 2021 (SCI-Expanded)
  10. 3D printing of PVA/hexagonal boron nitride/bacterial cellulose composite scaffolds for bone tissue engineering
    Aki D., Ulag S., ÜNAL S., ŞENGÖR M., EKREN N., Lin C., YILMAZER H., ÜSTÜNDAĞ C. B., Kalaskar D. M., GÜNDÜZ O.
    MATERIALS & DESIGN, vol.196, 2020 (SCI-Expanded)
  11. Current status and perspectives of zinc-based absorbable alloys for biomedical applications
    Hernández-Escobar D., Champagne S., YILMAZER H., DİKİCİ B., Boehlert C. J., Hermawan H.
    Acta Biomaterialia, vol.97, pp.1-22, 2019 (SCI-Expanded)
  12. Strength enhancement of an aluminum alloy through high pressure torsion
    Okeke U., YILMAZER H., Sato S., Boehlert C. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.760, pp.195-205, 2019 (SCI-Expanded)
  13. Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by high-pressure torsion
    Hernández-Escobar D., Rahman Z. U., YILMAZER H., Kawasaki M., Boehlert C. J.
    Philosophical Magazine, vol.99, no.5, pp.557-584, 2019 (SCI-Expanded)
  14. Synthesis and Characterization of Hydroxyapatite/TiO2 Coatings on the beta-Type Titanium Alloys with Different Sintering Parameters using Sol-Gel Method
    DİKİCİ B., Niinomi M., Topuz M., Say Y., AKSAKAL B., YILMAZER H., NAKAI M.
    PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, vol.54, no.3, pp.457-462, 2018 (SCI-Expanded)
  15. Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion
    Isik M., Niinomi M., Cho K., Nakai M., Liu H., Yilmazer H., Horita Z., SATO S., Narushima T.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, vol.59, pp.226-235, 2016 (SCI-Expanded)
  16. The Effect of Post-Heat Treatment on Microstructure of 316L Cold-Sprayed Coatings and Their Corrosion Performance
    Dikici B., YILMAZER H., Ozdemir I., Isik M.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, vol.25, no.4, pp.704-714, 2016 (SCI-Expanded)
  17. Grain Refinement Mechanism and Evolution of Dislocation Structure of Co-Cr-Mo Alloy Subjected to High-Pressure Torsion
    Isik M., Niinomi M., Liu H., Cho K., Nakai M., Horita Z., SATO S., Narushima T., YILMAZER H., Nagasako M.
    MATERIALS TRANSACTIONS, vol.57, no.7, pp.1109-1118, 2016 (SCI-Expanded)
  18. Developing biomedical nano-grained beta-type titanium alloys using high pressure torsion for improved cell adherence
    YILMAZER H., Sen M., Niinomi M., Nakai M., Liu Huihong L. H., Cho K., Todaka Y., Shiku H., Matsue T.
    RSC ADVANCES, vol.6, no.9, pp.7426-7430, 2016 (SCI-Expanded)
  19. Microstructural refinement and wear property of Al-Si-Cu composite subjected to extrusion and high-pressure torsion
    Gode C., Yilmazer H., Ozdemir I., TODAKA Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.618, pp.377-384, 2014 (SCI-Expanded)
  20. Microstructural evolution of precipitation-hardened beta-type titanium alloy through high-pressure torsion
    Yilmazer H., Niinomi M., Cho K., Nakai M., Hieda J., SATO S., TODAKA Y.
    ACTA MATERIALIA, vol.80, pp.172-182, 2014 (SCI-Expanded)
  21. Mechanical properties of a medical beta-type titanium alloy with specific microstructural evolution through high-pressure torsion
    Yilmazer H., Niinomi M., Nakai M., Cho K., Hieda J., TODAKA Y., Miyazaki T.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, vol.33, no.5, pp.2499-2507, 2013 (SCI-Expanded)
  22. Heterogeneous grain refinement of biomedical Ti-29Nb-13Ta-4.6Zr alloy through high-pressure torsion
    Nakai M., Niinomi M., Hieda J., Yilmazer H., TODAKA Y.
    SCIENTIA IRANICA, vol.20, no.3, pp.1067-1070, 2013 (SCI-Expanded)
  23. Heterogeneous structure and mechanical hardness of biomedical beta-type Ti-29Nb-13Ta-4.6Zr subjected to high-pressure torsion
    Yilmazer H., Niinomi M., Nakai M., Hieda J., TODAKA Y., AKAHORI T., Miyazaki T.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, vol.10, pp.235-245, 2012 (SCI-Expanded)
  24. The effect of extrusion and high-pressure torsion on the properties of Alumix-231
    Ozdemir I., Gode C., Yilmazer H., Callioglu H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.532, pp.573-578, 2012 (SCI-Expanded)

Articles Published in Other Journals

  1. VASCULAR ARTERY SIMULATION MODEL FABRICATION FOR PRE-SURGERY KIT FOR STENT APPLICATION THROUGH 3D PRINTING
    Yılmazer H., Uğurtaş T.
    International Journal of 3D Printing Technologies and Digital Industry, vol.7, 2023 (Peer-Reviewed Journal)
  2. A review on the hydrogels used in 3D bio-printing
    TOPUZ M., DİKİCİ B., GAVGALI M., YILMAZER H.
    International Journal of 3D Printing Technologies and Digital Industry, vol.2, pp.68-75, 2018 (Peer-Reviewed Journal)
  3. 3D Printing for Tissue Engineering Applications
    Hacıoğlu A., Yılmazer H., Üstündağ C. B.
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, vol.21, no.1, pp.221-227, 2018 (ESCI)
  4. Zirkonya Takviyeli Hidroksiapatit (HA) Bazlı Biyoaktif Hibrid Kaplamaların Korozyon Duyarlılıkları
    TOPUZ M., DİKİCİ B., KOÇ S., YILMAZER H., NIINOMI M., MASAAKI N.
    e-Journal of New World Sciences Academy, vol.12, pp.66-77, 2017 (Peer-Reviewed Journal)
  5. Nanostructure of β-type titanium alloys through severe plastic deformation
    Yilmazer H., Niinomi M., Cho K., Nakai M., Hieda J., Sato S., Todaka Y.
    Advanced Materials Letters, vol.5, no.7, pp.378-383, 2014 (Scopus)
  6. Effect of high-pressure torsion processing on microstructure and mechanical properties of a novel biomedical β-type Ti-29Nb-13Ta-4.6Zr after cold rolling
    Yilmazer H., Niinomi M., Akahori T., Nakai M., Todaka Y.
    International Journal of Microstructure and Materials Properties, vol.7, pp.168-186, 2012 (Scopus)
  7. Treatment of Surface Properties of Titanium with Plasma (Ion) Nitriding
    YILMAZER H., YILMAZ Ş., AÇMA M. E.
    Defect and Diffusion Forum, vol.283286, pp.401-405, 2009 (Scopus)

Books & Book Chapters

  1. Biomaterials and Tissue Engineering
    Yılmazer H., Çakır Koç R.
    Springer, London/Berlin , İstanbul, 2023

Refereed Congress / Symposium Publications in Proceedings

  1. Three-Dimensional Printing-Based Fabrication and Enhancement of Nerve Tissue Connectors Augmented with Nanoparticles
    Kaçar N., BERBER H., YILMAZER H., SADIKOĞLU H.
    Applications of Chemistry in Nanosciences and Biomaterials Engineering, BUCAREST, Romania, 28 - 30 June 2023
  2. Production and Development of Nervous Tissue Connectors Functioned with Nanoparticle, Pharmaceutical and Animal Derived Extracellular Matrix by 3D Printing
    Kaçar N., BERBER H., YILMAZER H., SADIKOĞLU H.
    The 16th International Scientific Research Congress, 23 - 24 March 2023
  3. Investigation of corrosion behavior of ZrN-based PVD coatings on Ti-29Nb-13Ta-4.6Zr alloy in Hank's solution
    Ali L. A., Aslan N., YILMAZER H., Niinomi M., Sen A., DİKİCİ B.
    3rd International Conference on Innovative Research in Applied Science, Engineering and Technology, IRASET 2023, Mohammedia, Morocco, 18 - 19 May 2023
  4. Mangalı Çelikte KAynak Parametrelerinin Kaynak Akışı, Mikroyapı ve Mekanik Özellikler Üzerine Etkisi
    Alkuş G., Yılmazer H.
    10. International Congress on Engineering, Architecture and Design, İstanbul, Turkey, 24 - 26 December 2022, vol.1, pp.1673
  5. Manganlı Çelikte Kaynak Parametrelerinin Kaynak Akışı, Mikroyapı ve Mekanik Özellikler Üzerine Etkisi
    ALKUŞ G., YILMAZER H.
    10th International Congress on Engineering, Architecture and Design, İstanbul, Turkey, 24 December 2022
  6. Development of tissue scaffolds through 3D bioprinting for burn wound healing
    Tokat P., METE GÜNAYDIN H., YILMAZER Y., GÜNDÜZ O., YILMAZER H., SADIKOĞLU H.
    5th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Turkey, 20 - 23 July 2021
  7. Microstructure and mechanical properties of the UFG magnesium alloy Mg-1%Ca
    Kulyasova O., Islamgaliev R., Lin H. C., YILMAZER H.
    International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, THERMEC 2021, Vienna, Austria, 10 - 14 May 2021, vol.1016 MSF, pp.768-773
  8. Effect of Equal Channel Angular Pressing Parameters on Meta-Stable Beta Titanium Alloy with Changeable Young ’ s Modulus
    Mahmutoğlu M. A., Günay Bulutsuz A., Nakai M., Yapıcı G. G., Yılmazer H.
    4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Turkey, 25 - 27 April 2019, vol.1, pp.1013-1015
  9. Nanostructured Biomedical Co-Cr-Mo alloys: Surface Susceptibilities and Cellular Responses
    Yılmazer H., Rencüzoğullari Ö. B., Arısan E. D., Işık M., Dikici B., Niinomi M., Horita Z.
    4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Turkey, 25 - 27 April 2019
  10. Preparation of Hydroxyapatite/Chitosan Hybrid Coatings on β-Type Ti alloys and Theirs In-vitro Corrosion Resistance
    TOPUZ M., DİKİCİ B., NIINOMI M., YILMAZER H., NAKAI M.
    X International Symposium on Materials (MATERIAIS 2019), Lizbon, Portugal, 14 - 17 April 2019, pp.59
  11. Investigation of Copper Alloys After Equal Channel Angular Pressing - Conform
    Gökduman A., Bakkaloğlu A., Yılmazer H.
    19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.342-345
  12. Tribocorrosion Behavior of Nanostructured Biomedical Co-Cr- Mo Alloys Through High Pressure Torsion
    YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., IŞIK M., KÖKLÜ H., Horita Z.
    Materials ScienceTechnology-2018, Columbus, United States Of America, 14 - 17 October 2018
  13. Achieving high-strength intermetallic through High-Pressure Torsion in Zn-Mg hybrids
    YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., IŞIK M., KÖKLÜ H., Horita Z.
    Materials ScienceTechnology-2018, Columbus, United States Of America, 14 - 17 October 2018
  14. A Review on The Hydrogels Used in 3D Bioprinting
    TOPUZ M., DİKİCİ B., GAVGALI M., YILMAZER H.
    3rd International Congress on 3D Printing (Additive Manufacturing)Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018, pp.135-138
  15. Electrochemical Impedance Spectroscopy (EIS) Evaluation of Biomedical Nanostructured β-type Titanium Alloys
    YILMAZER H., DİKİCİ B., NIINOMI M., NAKAI M.
    1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.388-389
  16. Electrochemical Impedance Spectroscopy (EIS) Evaluation of Biomedical Nanostructured β-type titanium alloys
    YILMAZER H., DİKİCİ B., Niinomi M., Nakai M.
    1st International Symposium of Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  17. β- type Ti-29Nb-13Ta-4.6Zr alloys subjected to solution heat treatment after severe cold rolling
    YILMAZER H., Abed M. S., Niinomi M., Nakai M.
    1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  18. Ultrasonic Assistance for Severe Plastic Deformation Applications
    Hermawan H., YILMAZER H.
    1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  19. Updates on magnesium-based absorbable metals”, 1st Int. Symp. Light Alloys and Composite Materials (ISLAC)
    Hermawan H., YILMAZER H.
    1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  20. High-pressure torsion as a novel technique for processing high strength Zn-based Alloys
    YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., IŞIK M., KÖKLÜ H., Horita Z.
    TMS-2018-14th Anual Meeting and Exhibition, Phoenix, Arizona, United States Of America, 11 - 15 March 2018
  21. Surface Biocompatibility of Nanostructured Co-Cr-Mo alloysthrough Severe Plastic Deformation
    YILMAZER H., ARISAN E. D., DİKİCİ B., IŞIK M., NIINOMI M.
    Functional Surfaces and Interfaces Workshop, İstanbul, Turkey, 25 November 2017
  22. The synthesis and determination of mechanical properties of metal oxide-reinforced hydroxyapatite based ceramic coatings
    TOPUZ M., KOÇ S., DİKİCİ B., NIINOMI M., NAKAI M., YILMAZER H.
    2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Turkey, 11 - 13 October 2017, pp.378
  23. Thermomechanical processing and its effects on microstructure and properties of β type Ti-29Nb- 13Ta-4.6Zr alloy
    Abed M. S., YILMAZER H., Niinomi M., YAPICI G. G.
    2nd International Conference on Materials Science and Technology, Nevşehir, Turkey, 11 - 13 October 2017, pp.737
  24. In-vitro corrosion responses of bioactive hybrid coatings
    DİKİCİ B., NIINOMI M., TOPUZ M., KOÇ S., YILMAZER H., NAKAI M.
    2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Turkey, 11 - 13 October 2017, pp.379
  25. Biomedical Beta-type Ti-29Nb-13Ta-4.6Zr Alloys: Importance, Fabrication and Thermomechanical Treatment
    YILMAZER H., Niinomi M.
    2nd International Conference on Materials Science and Technology, Nevşehir, Turkey, 11 - 13 October 2017, pp.635
  26. Comparison of corrosion behaviors of β-type Ti29Nb13Ta4.6Zr alloys with α and αβ type titanium alloys
    DİKİCİ B., NIINOMI M., TOPUZ M., YILMAZER H., NAKAI M.
    2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017
  27. High pressure torsion applications on dilute copper alloys
    KÖKLÜ H., YILMAZER H., GÖDE C., DİKİCİ B., TODAKA Y., GÖKER H.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.79-82
  28. Nano-grained Co-Cr-Mo alloys and Corrosion through Severe plastic Deformation
    YILMAZER H., DİKİCİ B., NIINOMI M., IŞIK M., NAKAI M., HORITA Z.
    20th International ESAFORM Conference on Material Forming, Dublin, Ireland, 26 - 28 April 2017
  29. Development of high value alloys without critical raw materials through high entropy alloys
    YILMAZER H., DİKİCİ B.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.238
  30. Corrosion‐Resistant High Entropy Stainless Steels — A Perspective
    DİKİCİ B., YILMAZER H.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.14
  31. 3D Printing for Tissue Engineering Applications
    Hacıoğlu A., YILMAZER H., ÜSTÜNDAĞ C. B.
    INTERNATIONAL SYMPOSIUM ON 3D PRINTING TECHNOLOGIES 3D-PTS2017, 3 - 04 April 2017
  32. High performance copper and copper alloys fabricated by severe plastic deformation
    GÖKDUMAN A., YILMAZER H., GÖDE C., DİKİCİ B., DVORAK J., SKLENICKA V., GÜNAY BULUTSUZ A., BAKKALOĞLU A., GÖKER H.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.75-78
  33. Electrochemical behaviors of biomedical nano-grained β-type titanium alloys
    YILMAZER H., DIKICI B., Niinomi M., Nakai M., Lui H., TODAKA Y., Ozcivan A. N.
    9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, Graz, Austria, 29 May - 03 June 2016, vol.879, pp.2549-2554
  34. PREPARATION AND CHARACTERIZATION OF CHITOSAN HYDROXYAPATITE SOL GEL COATING ON Ti 6Al 4V
    DİKİCİ B., YILMAZER H., TOPUZ M., KOÇ S., NIINOMI M.
    6th International Conference on Advanced Materials and Systems (ICAMS 2016), Bukres, Romania, 20 - 22 October 2016
  35. CORROSION SUSCEPTIBILITY OF HYDROXYAPATİTE HA BASED ZIRCONIA REINFORCED BIOACTIVE HYBRID COATINGS
    TOPUZ M., DİKİCİ B., KOÇ S., YILMAZER H., NAKAİ M., NIINOMI M.
    14. Uluslararası Korozyon Sempozyumu (KORSEM 2016), 5 - 07 October 2016, pp.1-10
  36. SYNTHESIS AND CHARACTERIZATION OF SOL GEL HYDROXYAPATITE COATINGS ON THE BETA TYPE TITANIUM ALLOYS THE EFFECT OF SINTERING CONDITIONS
    DİKİCİ B., TOPUZ M., KOÇ S., YILMAZER H., NIINOMI M.
    3rd International Conference on Advanced Technology Sciences (ICAT’xx16), Konya, Turkey, 1 - 03 September 2016
  37. BETA ß TİPİ TİTANYUM ALAŞIMLARININ ELEKTROKİMYASAL KOROZYON DAVRANIŞI ÜZERİNE HYDROXYAPATİTE ESASLI BİYOAKTİF KAPLAMALARIN ETKİSİ
    DİKİCİ B., TOPUZ M., KOÇ S., YILMAZER H., NIINOMI M., NAKAI M.
    12. Ulusal Kimya Mühendisliği Kongresi (UKMK2016), İzmir, Turkey, 23 - 26 August 2016, pp.419
  38. Nanoyapılı Beta tipi Titanyum alaşımları Mekanik ve Biyolojik uyumluluk Japonca
    KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., DİKİCİ B., ŞEN M., SHIKU H., TOMOKAZU M.
    The 36th Annual Meeting of Japan Society for Biomaterials, Tokyo, Japan, 17 - 18 November 2015
  39. MECHANICAL AND SURFACE FUNCTIONALITIES OF NANOSTRUCTURED TYPE TITANIUM ALLOYS THROUGH SEVERE PLASTIC DEFORMATION
    KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., DİKİCİ B., ŞEN M., SHIKU H., TOMOKAZU M.
    Ti-2015: The 13th World Conference on Titanium, San Diego, United States Of America, 16 - 20 August 2015
  40. Enhanced cellular activity on biomedical nano grained type titanium alloys
    YILMAZER H., NIINOMI M., NAKAI M., LIU H., TODAKA Y., ŞEN M., HITOSHI S., MATSUE T.
    The 10th Anniversary International Workshop on Biomaterials in Interface Science, Zhao, Japan, 4 - 05 August 2015
  41. Cold spray deposition of SS316L powders on Al5052 substrates The effect of powder carrying gases and heat treatment on the microstructure
    DİKİCİ B., YILMAZER H., ÖZDEMİR İ., Işık M.
    29th International Conference on Surface Modification Technologies (SMT29), Copenhagen, Denmark, 9 - 12 June 2015
  42. Osteoblast attachment on nanostructured type titanium alloys subjected to severe plastic deformation
    KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., DİKİCİ B., ŞEN M., SHIKU H., TOMOKAZU M.
    The 65th General Session of the Japanese Society for Dental Materials and Devices, Sendai, Japan, 11 - 12 April 2015, vol.34, pp.123
  43. Cellular behavior of nanostructured type Ti 29Nb 13Ta 4 6Zr through severe plastic deformation
    YILMAZER H., NIINOMI M., KEN C., MASAAKI N., HUIHONG L., YOSHIKAZU T., ŞEN M., SHIKU H., TOMOKAZU M.
    The 156th Annual Meeting of the Japan Institute of Metals and Materials, Tokyo, Japan, 18 - 20 March 2015
  44. Osteoblast cell behavior on biomedical type titanium alloys
    YILMAZER H., NIINOMI M., KEN C., NAKAI M., HUIHONG L., TODAKA Y., ŞEN M., MATSUE T., SHIKU H.
    The 128th Conference of Japan Institute of Light Metals, 16 - 17 March 2015
  45. Nanostructured ß-type titanium alloys: mechanical and biological biocompatibility
    YILMAZER H., Niinomi M., Cho K., Nakai M., Todaka Y., Dikici B., Sen M., Shiku H., Todaka T.
    Conference on Innovative Materials and Structure Technologies in Metallurgical Engineering, METECH ’14, 01 November 2014
  46. Nanostructure and fatigue behavior of ß-type titanium alloy subjected to high-pressure torsion after aging treatment
    YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Todaka Y.
    11th International Fatigue Congress, Fatigue 2014, 01 March 2014
  47. Microstructural analysis of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion processing
    Isik M., Niinomi M., Cho K., Nakai M., Hieda J., Yilmazer H., Horita Z., Narushima T.
    5th International Symposium on Advance Ceramics (ISAC) / 3rd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT), Wuhan, China, 9 - 12 December 2013, vol.616, pp.263-269
  48. Nanostructure and fatigue behavior of beta-type titanium alloy subjected to high-pressure torsion after aging treatment
    Yimazer H., Niinomi M., Cho K., Nakai M., Hieda J., Todaka Y.
    11th International Fatigue Congress, Melbourne, Australia, 2 - 07 March 2014, pp.9-14
  49. Nano-structural control of ß-type titanium alloys through severe plastic deformation
    YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Sato S., Todaka Y.
    Advanced Materials World Congress, 01 October 2013
  50. Effect of aging treatment on corrosion susceptibilities of biomedical nanostructured ß-type titanium alloys through severe plastic deformation
    Dikici B., YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Ozdemir I.
    9th Nanoscience and Nanotechnology Conference (NanoTR-9), 01 June 2013
  51. Mechanical Performances of Biomedical Beta-type Titanium Alloy through Heat Treatment and Severe Plastic Deformation
    AKAHORI T., NIINOMI M., NAKAI M., Yilmazer H., FUKUI H., TODAKA Y.
    Materials and Processes for Medical Devices Conference, Minnesota, United States Of America, 8 - 10 August 2011, pp.27-30
  52. Effect of high pressure torsion processing on corrosion behavior of a new biomedical type titanium alloy
    DİKİCİ B., YILMAZER H., NIINOMI M., NAKAI M., ÖZDEMİR İ., GAVGALI M.
    Corrosion-2012, 4 - 06 June 2012, vol.9, pp.95-100
  53. Microstructure and mechanical properties of a biomedical beta-type titanium alloy subjected to severe plastic deformation after aging treatment
    YILMAZER H., Niinomi M., Nakai M., Hieda J., Akahori T., Todaka Y.
    2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011)/8th Materials Science School for Young Scientists (KINKEN-WAKATE2011), Sendai, Japan, 1 - 02 December 2011, vol.508, pp.152-154
  54. Microstructure and mechanical properties of a biomedical ß-type titanium alloy subjected to severe plastic deformation after aging treatment
    YILMAZER H., Niinomi M., Nakai M., Hieda J., Akahori T., Todaka Y.
    The 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials, 01 December 2011
  55. The effect of extrusion and high-pressure torsion on the mechanical properties of Alumic-231 and its composite reinforced by SiC
    Gode C., Ozdemir I., Callioglu H., YILMAZER H.
    6th International Powder Metallurgy Conference and Exhibition, 01 October 2011
  56. Effect of high-pressure torsion processing on microstructures and mechanical properties of a biomedical ß-type titanium alloy
    YILMAZER H., Niinomi M., Akahori T., Nakai M., Todaka Y.
    15th International Metallurgy and Materials Congress (IMMC 2010), 01 November 2010
  57. Effects of severe plastic deformation and thermomechanical treatments on microstructures and mechanical properties of type titanium alloys for biomedical applications
    YILMAZER H., NIINOMI M., AKAHORI T., NAKAI M., TSUTSUMI H.
    Processing and Fabrication of Advanced Materials XIII (PFAM XIII), Sendai, Japan, 12 - 14 December 2009, vol.3, pp.1401-1410
  58. Treatment of Titanium surface properties with plasma (ion) nitriding
    YILMAZER H., YILMAZER S., Acma M. E.
    4th International Conference on Diffusion in Solids and Liquids (DSL2008), Barselona, Spain, 09 July 2008, pp.401-405

Other Publications

  1. Improvement of mechanical biocompatibility of ß-type titanium alloy subjected to high-pressure torsion
    YILMAZER H.
    Other, 2012

Courses

Malzeme Teknolojilerinde Tasarım Uygulamaları, Undergraduate, 2020 - 2021, 2018 - 2019
Metallography, Undergraduate, 2019 - 2020, 2018 - 2019
Uzmanlık Alan Dersi (Yüksek Lisans), Postgraduate, 2020 - 2021, 2019 - 2020, 2018 - 2019, 2017 - 2018
Uzmanlık Alan Dersi, Doctorate, 2020 - 2021
Yüksek Lisans Tezi, Postgraduate, 2020 - 2021, 2019 - 2020, 2018 - 2019, 2017 - 2018
Materials Science, Undergraduate, 2020 - 2021, 2019 - 2020, 2018 - 2019
Diffraksiyon Tekniği ile Malzemelerin Karakterizasyonu, Postgraduate, 2019 - 2020, 2016 - 2017
Bitirme Çalışması, Undergraduate, 2020 - 2021, 2019 - 2020, 2018 - 2019
Design Applications In Material Technologies, Undergraduate, 2020 - 2021, 2019 - 2020, 2018 - 2019
Biomedical Materials, Undergraduate, 2019 - 2020
Graduation Project, Undergraduate, 2019 - 2020
Ölçme Ve Kalibrasyon, Undergraduate, 2018 - 2019
Materials Laboratory, Undergraduate, 2017 - 2018, 2016 - 2017
Metallography, Undergraduate, 2017 - 2018, 2016 - 2017, 2015 - 2016
Bitirme Çalışması, Undergraduate, 2017 - 2018, 2016 - 2017, 2015 - 2016
Metallography (İ.Ö), Undergraduate, 2016 - 2017
Mekanik Metalürji, Undergraduate, 2016 - 2017
Physical Metallurgy, Undergraduate, 2017 - 2018, 2016 - 2017, 2015 - 2016
Tasarım Uygulamaları (İ.Ö), Undergraduate, 2016 - 2017, 2015 - 2016
Plasticity, Undergraduate, 2015 - 2016
Manufacturing of Biomedical Materials, Undergraduate, 2016 - 2017
Tasarım Uygulamaları, Undergraduate, 2016 - 2017, 2015 - 2016
Materials Science, Undergraduate, 2015 - 2016

Advising Theses

Yılmazer H., Baydoğan M., ÇİNKO ESASLI ANTİBAKTERİYEL BİYOBOZUNUR MALZEMELERİN ÜRETİMİ VE YÜZEY ÖZELLİKLERİNİN MİKRO ARK OKSİDASYON YÖNTEMİYLE GELİŞTİRİLMESİ, Postgraduate, A.AYDOĞAN(Student), 2020
Bakkaloğlu A., Yılmazer H., Bakır Alaşımlarının Mikroyapı, Mekanik ve Elektriksel Özellikleri Üzerinde Eş Kanallı Açısal Presleme-Konform Prosesinin Etkilerinin İncelenmesi, Postgraduate, A.Gökduman(Student), 2019
Yılmazer H., Yüksek performanslı nano taneli bakır ve bakır alaşımlarının yüksek basınç altında burma prosesiyle geliştirilmesi, Postgraduate, H.KÖKLÜ(Student), 2019
Yılmazer H., Thermomechanical processing and its effects on microstructure and biomedical behaviors of β-type titanium alloys, Postgraduate, M.SALAH(Student), 2018

Scientific Refereeing

Ceramics International, SCI Journal, February 2015
Ceramics International, SCI Journal, January 2015
Materials Science & Engineering C, SCI Journal, January 2014
Materials Science & Engineering C, SCI Journal, September 2013
Materials Science & Engineering C, SCI Journal, September 2013
Materials Science & Engineering C, SCI Journal, July 2013
Materials Science & Engineering C, SCI Journal, April 2013
Materials Science & Engineering C, SCI Journal, February 2013
Materials Science & Engineering C, SCI Journal, December 2012
Materials Science & Engineering C, SCI Journal, October 2012
Materials Science & Engineering C, SCI Journal, May 2012

Scientific Research / Working Group Memberships

Cost Action Ca21155 - Advanced Composites Under Hıgh Strain Rates Loading: A Route To Certification-By-Analysis, Yildiz Technical University, Türkiye, https://e-services.cost.eu/action/CA21155, 2023 - Continues

Metrics





Invited Talks

– Significance of Severe Plastic Deformation for Production of Biomedical and Biocompatible Materials, Seminar, Department of Chemical Engineering and Materials Science / Michigan State University, United States Of America, October 2018
Significance of SPD for production of biomedical and biocompatible materials, Workshop, Kyushu University, Japan, September 2018

Research Areas

Mechanical Engineering, Construction and Manufacturing, Non-traditional manufacturing methods, Material, Plastic Forming Methods, Metallurgical and Materials Engineering, Material science and engineering, Corrosion and Corrosion Protection, Polymeric Materials, Biomaterials, Physical Metallurgy, Thermal Treatment, Material Characterization, Metallic Materials, Structure-Property Relationship, Engineering and Technology