Learning Knowledge


Doctorate
2008 - 2012
Tohoku University, Graduate School Of Engineering, Materials Science, Japan

Post Graduate
2006 - 2008
İstanbul Teknik Üniversitesi, Kimya-Metalürji Fakültesi, Metalürji Ve Malzeme Mühensiliği, Turkey

Under Graduate
2001 - 2006
İstanbul Teknik Üniversitesi, Kimya-Metalürji Fakültesi, Metalürji Ve Malzeme Mühensiliği, Turkey

Foreign Languages

Japanese, A2 Elementary
English, C2 Mastery

Dissertations

Doctorate, Improvement of Mechanical Biocompatibility of Biomedical ß-type Titanium Alloys through High Pressure Torsion, Tohoku University, Graduate School Of Engineering, Materials Science, 2012
Post Graduate, Titanyum ve Titanyum Alaşımlarının Yüzey Özelliklerinin Plasma (İyon) Nitrürleme ile Geliştirilmesi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalürji Ve Malzeme Mühendisliği, 2008

Academic Titles / Tasks


Assistant Professor
2015 - Continues
Yildiz Technical University, Faculty Of Chemıcal And Metallurgıcal Engıneerıng, Department Of Metallurgical And Materials Engineering

Research Assistant PhD
2012 - 2015
Tohoku University, Institute For Materials Research, Biomaterials

Research Assistant
2008 - 2012
Tohoku University, Institute For Materials Research, Biomaterials

Supported Projects

  1. Yılmazer H., TÜBİTAK International Bilateral Joint Cooperation Program Project, Investigation on fabrication and characterization of novel ultrafine grained biodegradable ureteral stents, 2021 - 2024
  2. Yılmazer H., Ünek M., Aksakal B., TUBITAK Project, Biyobozunur Zn-Cu-Ag Alaşımlar Üzerinde Haddeleme ve Tavlama Isıl İşlem Parameterelerinin Etkisinin İncelenmesi, 2020 - 2021
  3. Yılmazer H., Maraşlı N., Birsen D., TUBITAK Project, Cu, Mn, Ni, Fe, Al, Cr, Ti Elementleriyle Oluşturulacak Yüksek Entropi Alaşım Sisteminin Bilgisayar Ortamında Modellenmesi ve Dislokasyon Hareketlerinin Analizi İle Geliştirilmesi, 2020 - 2021
  4. Yılmazer H., Gündoğdu N., Aksakal B., TUBITAK Project, Mikronano Mimari Yüzeye Sahip Biyobozunur Çinko Esaslı İmplantların Anodik Oksidasyon Yöntemi ile Geliştirilmesi ve Karakterizasyonu, 2020 - 2021
  5. Yılmazer H., Günay Bulutsuz A., Dikici B., Arısan E. D. , Taşpınar M., Project Supported by Higher Education Institutions, Kemik defekt tedavilerinde kullanılacak ideal biyobozunurluk ve yüksek mukavemet sergileyen biyobozunur nanokompozitlerin geliştirilmesi ve in vitro karakterizasyon çalışmaları, 2018 - 2021
  6. Yılmazer H., Kök H., TUBITAK Project, Psoriasis Tedavisinde Probolis İçerikli Yara Örtüsü, 2019 - 2020
  7. YILMAZER H., Project Supported by Higher Education Institutions, Nano Taneli Co-Cr-Mo İmplantların Aşırı Plastik Deformasyon (APD) Yöntemiyle Üretimi ve Geliştirilmesi, 2016 - 2020
  8. Nıınomı M., Other Supported Projects, Lokal deformasyonla elastiklik modulu kontroluyle biyomedikal titanyum alaşımların iyileştirimesi (Japonca'dan çeviri), 2015 - 2020
  9. Yılmazer H., Kütük B., TUBITAK Project, Antibakteriyel Biyobozunur Alaşım Tasarımı ve Geliştirilmesi, 2018 - 2019
  10. Yılmazer H., Kayalıdağ C., TUBITAK Project, 3B boyutlu biyobasım yazıcısı için hastaya özgü biyomedikal iskele implant modellemesi ve prototipinin üretilmesi, 2018 - 2019
  11. Yılmazer H., Aydoğan A., TUBITAK Project, 3 Boyutlu Biyobasım Yazıcısı İçin Hastaya Özgü Biyomedikal İskele İmplant Modellemesi ve Prototipin Üretimi, 2018 - 2019
  12. Yılmazer H., Arslanyan D., TUBITAK Project, Çinko esaslı biyobozunur iskele implantların geliştirilmesi, 2018 - 2019
  13. Yılmazer H., TUBITAK Project, Yüksek performanslı nano-yapılı Co-Cr-Mo implantların yüksek basınç altında burma (YBB) yöntemiyle üretimi ve geliştirilmesi, 2017 - 2019
  14. YILMAZER H., KÖKLÜ H., Project Supported by Higher Education Institutions, Yüksek Performanslı Nano Taneli Bakır ve Bakır Alaşımlarının Yüksek Basınç Altında Burma Prosesiyle Geliştirilmesi, 2016 - 2019
  15. Yılmazer H., Nıınomı M., Other Supported Projects, Yeni Nesil Biyomedical Titanyum Alaşımların Araştırılması ve Geliştirilmesi (Japonca'dan çeviri), 2013 - 2018
  16. Yılmazer H., Yılmaz Y. B. , TUBITAK Project, Yarı otomatik parlatma cihazı geliştirilmesi, 2016 - 2017
  17. YILMAZER H., Other Supported Projects, Lokal deformasyonla elastiklik modülü kontrolüyle biyomedikal titanyum alaşımların iyileştirilmesi Japonca, 2013 - 2015
  18. Yılmaz Ş., TUBITAK Project, Yüksek Performanslı Vidalı Diş İmplant İmalatı, 2006 - 2009

Awards

  1. Yılmazer H., Arısan E. D. , Poster Ödülü, Functional Surfaces And Interfaces Workshop, Sabancı Üniversitesi, December 2018
  2. Yılmazer H., Dikici B., Nıınomı M., Nakaı M., Işık M. D. , Horıta Z., Certificate of Awards: Third Prize , 20Th International Esaform Conference On Materials Forming (Esaform 2017), April 2017
  3. Yılmazer H., Nakai M., Best Poster Presentation For Young Scientists, International Symposium Of Materials Integration In Conjunction With The 2Nd International Symposium On Advanced Synthesis And Processing Technology For Materials, Japonya, 2011, December 2011

Jury Memberships

Doctorate, Doctorate, İstanbul Teknik Üniversitesi, January, 2021
PhD Thesis Monitoring Committee Member, PhD Thesis Monitoring Committee Member, İstanbul Teknik Üniversitesi, August, 2020
Doctorate, Doctorate, Yıldız Teknik Üniversitesi, August, 2020
Post Graduate, Post Graduate, Yıldız Teknik Üniversitesi, July, 2020
Post Graduate, Post Graduate, İstanbul Teknik Üniversitesi, June, 2020
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, March, 2020
Doctorate, THERMO-MECHANICAL BEHAVIOR OF SEVERELY DEFORMED TITANIUM, Özyeğin Üniversitesi, June, 2017
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, February, 2017
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, December, 2016
Doctorate, Doctorate, İstanbul Teknik Üniversitesi, December, 2016

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

  1. Selenium and clarithromycin loaded PLA-GO composite wound dressings by electrospinning method
    Ciftci F., Ayan S., DUYGULU N., Yilmazer Y., Karavelioglu Z., Vehapi M., Koc R. C. , ŞENGÖR M., YILMAZER H., ÖZÇİMEN D., et al.
    INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS, 2021 (Journal Indexed in SCI)
  2. 3D printing of PVA/hexagonal boron nitride/bacterial cellulose composite scaffolds for bone tissue engineering
    Aki D., Ulag S., ÜNAL S., ŞENGÖR M., EKREN N., Lin C., YILMAZER H., ÜSTÜNDAĞ C. B. , Kalaskar D. M. , GÜNDÜZ O.
    MATERIALS & DESIGN, vol.196, 2020 (Journal Indexed in SCI)
  3. A systematic study of β-type Ti-based PVD coatings on magnesium for biomedical application
    Zarka M., DİKİCİ B., Niinomi M., EZİRMİK K. V. , Nakai M., YILMAZER H.
    Vacuum, 2020 (Journal Indexed in SCI Expanded)
  4. Current status and perspectives of zinc-based absorbable alloys for biomedical applications
    Hernández-Escobar D., Champagne S., YILMAZER H., DİKİCİ B., Boehlert C. J. , Hermawan H.
    Acta Biomaterialia, vol.97, pp.1-22, 2019 (Journal Indexed in SCI)
  5. Strength enhancement of an aluminum alloy through high pressure torsion
    Okeke U., YILMAZER H., Sato S., Boehlert C. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.760, pp.195-205, 2019 (Journal Indexed in SCI)
  6. Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by high-pressure torsion
    Hernández-Escobar D., Rahman Z. U. , YILMAZER H., Kawasaki M., Boehlert C. J.
    Philosophical Magazine, vol.99, no.5, pp.557-584, 2019 (Journal Indexed in SCI Expanded)
  7. Synthesis and Characterization of Hydroxyapatite/TiO2 Coatings on the beta-Type Titanium Alloys with Different Sintering Parameters using Sol-Gel Method
    DİKİCİ B., Niinomi M., Topuz M., Say Y., AKSAKAL B., YILMAZER H., NAKAI M.
    PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, vol.54, no.3, pp.457-462, 2018 (Journal Indexed in SCI)
  8. Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion
    Isik M., Niinomi M., Cho K., Nakai M., Liu H., Yilmazer H., Horita Z., SATO S., Narushima T.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, vol.59, pp.226-235, 2016 (Journal Indexed in SCI)
  9. The Effect of Post-Heat Treatment on Microstructure of 316L Cold-Sprayed Coatings and Their Corrosion Performance
    Dikici B., YILMAZER H., Ozdemir I., Isik M.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, vol.25, no.4, pp.704-714, 2016 (Journal Indexed in SCI)
  10. Developing biomedical nano-grained beta-type titanium alloys using high pressure torsion for improved cell adherence
    YILMAZER H., Sen M., Niinomi M., Nakai M., Liu Huihong L. H. , Cho K., Todaka Y., Shiku H., Matsue T.
    RSC ADVANCES, vol.6, no.9, pp.7426-7430, 2016 (Journal Indexed in SCI)
  11. Grain Refinement Mechanism and Evolution of Dislocation Structure of Co-Cr-Mo Alloy Subjected to High-Pressure Torsion
    Isik M., Niinomi M., Liu H., Cho K., Nakai M., Horita Z., SATO S., Narushima T., YILMAZER H., Nagasako M.
    MATERIALS TRANSACTIONS, vol.57, no.7, pp.1109-1118, 2016 (Journal Indexed in SCI)
  12. Microstructural refinement and wear property of Al-Si-Cu composite subjected to extrusion and high-pressure torsion
    Gode C., Yilmazer H., Ozdemir I., TODAKA Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.618, pp.377-384, 2014 (Journal Indexed in SCI)
  13. Microstructural evolution of precipitation-hardened beta-type titanium alloy through high-pressure torsion
    Yilmazer H., Niinomi M., Cho K., Nakai M., Hieda J., SATO S., TODAKA Y.
    ACTA MATERIALIA, vol.80, pp.172-182, 2014 (Journal Indexed in SCI)
  14. Mechanical properties of a medical beta-type titanium alloy with specific microstructural evolution through high-pressure torsion
    Yilmazer H., Niinomi M., Nakai M., Cho K., Hieda J., TODAKA Y., Miyazaki T.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, vol.33, no.5, pp.2499-2507, 2013 (Journal Indexed in SCI)
  15. Heterogeneous grain refinement of biomedical Ti-29Nb-13Ta-4.6Zr alloy through high-pressure torsion
    Nakai M., Niinomi M., Hieda J., Yilmazer H., TODAKA Y.
    SCIENTIA IRANICA, vol.20, no.3, pp.1067-1070, 2013 (Journal Indexed in SCI)
  16. Heterogeneous structure and mechanical hardness of biomedical beta-type Ti-29Nb-13Ta-4.6Zr subjected to high-pressure torsion
    Yilmazer H., Niinomi M., Nakai M., Hieda J., TODAKA Y., AKAHORI T., Miyazaki T.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, vol.10, pp.235-245, 2012 (Journal Indexed in SCI)
  17. The effect of extrusion and high-pressure torsion on the properties of Alumix-231
    Ozdemir I., Gode C., Yilmazer H., Callioglu H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.532, pp.573-578, 2012 (Journal Indexed in SCI)

Articles Published in Other Journals

  1. A review on the hydrogels used in 3D bio-printing
    TOPUZ M., DİKİCİ B., GAVGALI M., YILMAZER H.
    International Journal of 3D Printing Technologies and Digital Industry, vol.2, pp.68-75, 2018 (Refereed Journals of Other Institutions)
  2. 3D Printing for Tissue Engineering Applications
    Hacıoğlu A., Yılmazer H., Üstündağ C. B.
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, vol.21, no.1, pp.221-227, 2018 (Journal Indexed in ESCI)
  3. Zirkonya Takviyeli Hidroksiapatit (HA) Bazlı Biyoaktif Hibrid Kaplamaların Korozyon Duyarlılıkları
    TOPUZ M., DİKİCİ B., KOÇ S., YILMAZER H., NIINOMI M., MASAAKI N.
    e-Journal of New World Sciences Academy, vol.12, pp.66-77, 2017 (Refereed Journals of Other Institutions)
  4. Nanostructure of β-type titanium alloys through severe plastic deformation
    Yilmazer H., Niinomi M., Cho K., Nakai M., Hieda J., Sato S., Todaka Y.
    Advanced Materials Letters, vol.5, no.7, pp.378-383, 2014 (Refereed Journals of Other Institutions)
  5. Effect of high-pressure torsion processing on microstructure and mechanical properties of a novel biomedical β-type Ti-29Nb-13Ta-4.6Zr after cold rolling
    Yilmazer H., Niinomi M., Akahori T., Nakai M., Todaka Y.
    International Journal of Microstructure and Materials Properties, vol.7, pp.168-186, 2012 (Refereed Journals of Other Institutions)
  6. Treatment of Surface Properties of Titanium with Plasma (Ion) Nitriding
    YILMAZER H., YILMAZ Ş., AÇMA M. E.
    Defect and Diffusion Forum, vol.283286, pp.401-405, 2009 (Refereed Journals of Other Institutions)

Refereed Congress / Symposium Publications in Proceedings

  1. Nanostructured Biomedical Co-Cr-Mo alloys: Surface Susceptibilities and Cellular Responses
    Yılmazer H., Rencüzoğullari Ö. B. , Arısan E. D. , Işık M., Dikici B., Niinomi M., Horita Z.
    4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Turkey, 25 - 27 April 2019
  2. Preparation of Hydroxyapatite/Chitosan Hybrid Coatings on β-Type Ti alloys and Theirs In-vitro Corrosion Resistance
    TOPUZ M., DİKİCİ B., NIINOMI M., YILMAZER H., NAKAI M.
    X International Symposium on Materials (MATERIAIS 2019), Lizbon, Portugal, 14 - 17 April 2019, pp.59
  3. Tribocorrosion Behavior of Nanostructured Biomedical Co-Cr- Mo Alloys Through High Pressure Torsion
    YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., IŞIK M., KÖKLÜ H., Horita Z.
    Materials ScienceTechnology-2018, Columbus, United States Of America, 14 - 17 October 2018
  4. Achieving high-strength intermetallic through High-Pressure Torsion in Zn-Mg hybrids
    YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., IŞIK M., KÖKLÜ H., Horita Z.
    Materials ScienceTechnology-2018, Columbus, United States Of America, 14 - 17 October 2018
  5. A Review on The Hydrogels Used in 3D Bioprinting
    TOPUZ M., DİKİCİ B., GAVGALI M., YILMAZER H.
    3rd International Congress on 3D Printing (Additive Manufacturing)Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018, pp.135-138
  6. Electrochemical Impedance Spectroscopy (EIS) Evaluation of Biomedical Nanostructured β-type Titanium Alloys
    YILMAZER H., DİKİCİ B., NIINOMI M., NAKAI M.
    1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.388-389
  7. Updates on magnesium-based absorbable metals”, 1st Int. Symp. Light Alloys and Composite Materials (ISLAC)
    Hermawan H., YILMAZER H.
    1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  8. β- type Ti-29Nb-13Ta-4.6Zr alloys subjected to solution heat treatment after severe cold rolling
    YILMAZER H., Abed M. S. , Niinomi M., Nakai M.
    1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  9. Electrochemical Impedance Spectroscopy (EIS) Evaluation of Biomedical Nanostructured β-type titanium alloys
    YILMAZER H., DİKİCİ B., Niinomi M., Nakai M.
    1st International Symposium of Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  10. Ultrasonic Assistance for Severe Plastic Deformation Applications
    Hermawan H., YILMAZER H.
    1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Turkey, 22 - 24 March 2018
  11. High-pressure torsion as a novel technique for processing high strength Zn-based Alloys
    YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., IŞIK M., KÖKLÜ H., Horita Z.
    TMS-2018-14th Anual Meeting and Exhibition, Phoenix, Arizona, United States Of America, 11 - 15 March 2018
  12. Surface Biocompatibility of Nanostructured Co-Cr-Mo alloysthrough Severe Plastic Deformation
    YILMAZER H., ARISAN E. D. , DİKİCİ B., IŞIK M., NIINOMI M.
    Functional Surfaces and Interfaces Workshop, İstanbul, Turkey, 25 November 2017
  13. The synthesis and determination of mechanical properties of metal oxide-reinforced hydroxyapatite based ceramic coatings
    TOPUZ M., KOÇ S., DİKİCİ B., NIINOMI M., NAKAI M., YILMAZER H.
    2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Turkey, 11 - 13 October 2017, pp.378
  14. Thermomechanical processing and its effects on microstructure and properties of β type Ti-29Nb- 13Ta-4.6Zr alloy
    Abed M. S. , YILMAZER H., Niinomi M., YAPICI G. G.
    2nd International Conference on Materials Science and Technology, Nevşehir, Turkey, 11 - 13 October 2017, pp.737
  15. Biomedical Beta-type Ti-29Nb-13Ta-4.6Zr Alloys: Importance, Fabrication and Thermomechanical Treatment
    YILMAZER H., Niinomi M.
    2nd International Conference on Materials Science and Technology, Nevşehir, Turkey, 11 - 13 October 2017, pp.635
  16. In-vitro corrosion responses of bioactive hybrid coatings
    DİKİCİ B., NIINOMI M., TOPUZ M., KOÇ S., YILMAZER H., NAKAI M.
    2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Turkey, 11 - 13 October 2017, pp.379
  17. Comparison of corrosion behaviors of β-type Ti29Nb13Ta4.6Zr alloys with α and αβ type titanium alloys
    DİKİCİ B., NIINOMI M., TOPUZ M., YILMAZER H., NAKAI M.
    2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017
  18. High pressure torsion applications on dilute copper alloys
    KÖKLÜ H., YILMAZER H., GÖDE C., DİKİCİ B., TODAKA Y., GÖKER H.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.79-82
  19. Nano-grained Co-Cr-Mo alloys and Corrosion through Severe plastic Deformation
    YILMAZER H., DİKİCİ B., NIINOMI M., IŞIK M., NAKAI M., HORITA Z.
    20th International ESAFORM Conference on Material Forming, Dublin, Ireland, 26 - 28 April 2017
  20. Corrosion‐Resistant High Entropy Stainless Steels — A Perspective
    DİKİCİ B., YILMAZER H.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.14
  21. 3D Printing for Tissue Engineering Applications
    Hacıoğlu A., YILMAZER H., ÜSTÜNDAĞ C. B.
    INTERNATIONAL SYMPOSIUM ON 3D PRINTING TECHNOLOGIES 3D-PTS2017, 3 - 04 April 2017
  22. Development of high value alloys without critical raw materials through high entropy alloys
    YILMAZER H., DİKİCİ B.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.238
  23. High performance copper and copper alloys fabricated by severe plastic deformation
    GÖKDUMAN A., YILMAZER H., GÖDE C., DİKİCİ B., DVORAK J., SKLENICKA V., GÜNAY BULUTSUZ A., BAKKALOĞLU A., GÖKER H.
    3rd International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, pp.75-78
  24. Electrochemical behaviors of biomedical nano-grained β-type titanium alloys
    YILMAZER H., DIKICI B., Niinomi M., Nakai M., Lui H., TODAKA Y., Ozcivan A. N.
    9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, Graz, Austria, 29 May - 03 June 2016, vol.879, pp.2549-2554
  25. PREPARATION AND CHARACTERIZATION OF CHITOSAN HYDROXYAPATITE SOL GEL COATING ON Ti 6Al 4V
    DİKİCİ B., YILMAZER H., TOPUZ M., KOÇ S., NIINOMI M.
    6th International Conference on Advanced Materials and Systems (ICAMS 2016), Bukres, Romania, 20 - 22 October 2016
  26. CORROSION SUSCEPTIBILITY OF HYDROXYAPATİTE HA BASED ZIRCONIA REINFORCED BIOACTIVE HYBRID COATINGS
    TOPUZ M., DİKİCİ B., KOÇ S., YILMAZER H., NAKAİ M., NIINOMI M.
    14. Uluslararası Korozyon Sempozyumu (KORSEM 2016), 5 - 07 October 2016, pp.1-10
  27. SYNTHESIS AND CHARACTERIZATION OF SOL GEL HYDROXYAPATITE COATINGS ON THE BETA TYPE TITANIUM ALLOYS THE EFFECT OF SINTERING CONDITIONS
    DİKİCİ B., TOPUZ M., KOÇ S., YILMAZER H., NIINOMI M.
    3rd International Conference on Advanced Technology Sciences (ICAT’xx16), Konya, Turkey, 1 - 03 September 2016
  28. BETA ß TİPİ TİTANYUM ALAŞIMLARININ ELEKTROKİMYASAL KOROZYON DAVRANIŞI ÜZERİNE HYDROXYAPATİTE ESASLI BİYOAKTİF KAPLAMALARIN ETKİSİ
    DİKİCİ B., TOPUZ M., KOÇ S., YILMAZER H., NIINOMI M., NAKAI M.
    12. Ulusal Kimya Mühendisliği Kongresi (UKMK2016), İzmir, Turkey, 23 - 26 August 2016, pp.419
  29. Nanoyapılı Beta tipi Titanyum alaşımları Mekanik ve Biyolojik uyumluluk Japonca
    KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., DİKİCİ B., ŞEN M., SHIKU H., TOMOKAZU M.
    The 36th Annual Meeting of Japan Society for Biomaterials, Tokyo, Japan, 17 - 18 November 2015
  30. MECHANICAL AND SURFACE FUNCTIONALITIES OF NANOSTRUCTURED TYPE TITANIUM ALLOYS THROUGH SEVERE PLASTIC DEFORMATION
    KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., DİKİCİ B., ŞEN M., SHIKU H., TOMOKAZU M.
    Ti-2015: The 13th World Conference on Titanium, San Diego, United States Of America, 16 - 20 August 2015
  31. Enhanced cellular activity on biomedical nano grained type titanium alloys
    YILMAZER H., NIINOMI M., NAKAI M., LIU H., TODAKA Y., ŞEN M., HITOSHI S., MATSUE T.
    The 10th Anniversary International Workshop on Biomaterials in Interface Science, Zhao, Japan, 4 - 05 August 2015
  32. Cold spray deposition of SS316L powders on Al5052 substrates The effect of powder carrying gases and heat treatment on the microstructure
    DİKİCİ B., YILMAZER H., ÖZDEMİR İ., Işık M.
    29th International Conference on Surface Modification Technologies (SMT29), Copenhagen, Denmark, 9 - 12 June 2015
  33. Osteoblast attachment on nanostructured type titanium alloys subjected to severe plastic deformation
    KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., DİKİCİ B., ŞEN M., SHIKU H., TOMOKAZU M.
    The 65th General Session of the Japanese Society for Dental Materials and Devices, Sendai, Japan, 11 - 12 April 2015, vol.34, pp.123
  34. Cellular behavior of nanostructured type Ti 29Nb 13Ta 4 6Zr through severe plastic deformation
    YILMAZER H., NIINOMI M., KEN C., MASAAKI N., HUIHONG L., YOSHIKAZU T., ŞEN M., SHIKU H., TOMOKAZU M.
    The 156th Annual Meeting of the Japan Institute of Metals and Materials, Tokyo, Japan, 18 - 20 March 2015
  35. Osteoblast cell behavior on biomedical type titanium alloys
    YILMAZER H., NIINOMI M., KEN C., NAKAI M., HUIHONG L., TODAKA Y., ŞEN M., MATSUE T., SHIKU H.
    The 128th Conference of Japan Institute of Light Metals, 16 - 17 March 2015
  36. Nanostructured ß-type titanium alloys: mechanical and biological biocompatibility
    YILMAZER H., Niinomi M., Cho K., Nakai M., Todaka Y., Dikici B., Sen M., Shiku H., Todaka T.
    Conference on Innovative Materials and Structure Technologies in Metallurgical Engineering, METECH ’14, 01 November 2014
  37. Nanostructure and fatigue behavior of ß-type titanium alloy subjected to high-pressure torsion after aging treatment
    YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Todaka Y.
    11th International Fatigue Congress, Fatigue 2014, 01 March 2014
  38. Microstructural analysis of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion processing
    Isik M., Niinomi M., Cho K., Nakai M., Hieda J., Yilmazer H., Horita Z., Narushima T.
    5th International Symposium on Advance Ceramics (ISAC) / 3rd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT), Wuhan, China, 9 - 12 December 2013, vol.616, pp.263-269
  39. Nanostructure and fatigue behavior of beta-type titanium alloy subjected to high-pressure torsion after aging treatment
    Yimazer H., Niinomi M., Cho K., Nakai M., Hieda J., Todaka Y.
    11th International Fatigue Congress, Melbourne, Australia, 2 - 07 March 2014, pp.9-14
  40. Nano-structural control of ß-type titanium alloys through severe plastic deformation
    YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Sato S., Todaka Y.
    Advanced Materials World Congress, 01 October 2013
  41. Effect of aging treatment on corrosion susceptibilities of biomedical nanostructured ß-type titanium alloys through severe plastic deformation
    Dikici B., YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Ozdemir I.
    9th Nanoscience and Nanotechnology Conference (NanoTR-9), 01 June 2013
  42. Mechanical Performances of Biomedical Beta-type Titanium Alloy through Heat Treatment and Severe Plastic Deformation
    AKAHORI T., NIINOMI M., NAKAI M., Yilmazer H., FUKUI H., TODAKA Y.
    Materials and Processes for Medical Devices Conference, Minnesota, United States Of America, 8 - 10 August 2011, pp.27-30
  43. Effect of high pressure torsion processing on corrosion behavior of a new biomedical type titanium alloy
    DİKİCİ B., YILMAZER H., NIINOMI M., NAKAI M., ÖZDEMİR İ., GAVGALI M.
    Corrosion-2012, 4 - 06 June 2012, vol.9, pp.95-100
  44. Microstructure and mechanical properties of a biomedical beta-type titanium alloy subjected to severe plastic deformation after aging treatment
    YILMAZER H., Niinomi M., Nakai M., Hieda J., Akahori T., Todaka Y.
    2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011)/8th Materials Science School for Young Scientists (KINKEN-WAKATE2011), Sendai, Japan, 1 - 02 December 2011, vol.508, pp.152-154
  45. Microstructure and mechanical properties of a biomedical ß-type titanium alloy subjected to severe plastic deformation after aging treatment
    YILMAZER H., Niinomi M., Nakai M., Hieda J., Akahori T., Todaka Y.
    The 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials, 01 December 2011
  46. The effect of extrusion and high-pressure torsion on the mechanical properties of Alumic-231 and its composite reinforced by SiC
    Gode C., Ozdemir I., Callioglu H., YILMAZER H.
    6th International Powder Metallurgy Conference and Exhibition, 01 October 2011
  47. Effect of high-pressure torsion processing on microstructures and mechanical properties of a biomedical ß-type titanium alloy
    YILMAZER H., Niinomi M., Akahori T., Nakai M., Todaka Y.
    15th International Metallurgy and Materials Congress (IMMC 2010), 01 November 2010
  48. Effects of severe plastic deformation and thermomechanical treatments on microstructures and mechanical properties of type titanium alloys for biomedical applications
    YILMAZER H., NIINOMI M., AKAHORI T., NAKAI M., TSUTSUMI H.
    Processing and Fabrication of Advanced Materials XIII (PFAM XIII), Sendai, Japan, 12 - 14 December 2009, vol.3, pp.1401-1410
  49. Treatment of Titanium surface properties with plasma (ion) nitriding
    YILMAZER H., YILMAZER S., Acma M. E.
    4th International Conference on Diffusion in Solids and Liquids (DSL2008), Barselona, Spain, 09 July 2008, pp.401-405

Other Publications

  1. Improvement of mechanical biocompatibility of ß-type titanium alloy subjected to high-pressure torsion
    YILMAZER H.
    Other, 2012

Advising Theses

Yılmazer H., Baydoğan M., ÇİNKO ESASLI ANTİBAKTERİYEL BİYOBOZUNUR MALZEMELERİN ÜRETİMİ VE YÜZEY ÖZELLİKLERİNİN MİKRO ARK OKSİDASYON YÖNTEMİYLE GELİŞTİRİLMESİ, Post Graduate, A.AYDOĞAN(Student), 2020
Bakkaloğlu A., Yılmazer H., Bakır Alaşımlarının Mikroyapı, Mekanik ve Elektriksel Özellikleri Üzerinde Eş Kanallı Açısal Presleme-Konform Prosesinin Etkilerinin İncelenmesi, Post Graduate, A.Gökduman(Student), 2019
Yılmazer H., Yüksek performanslı nano taneli bakır ve bakır alaşımlarının yüksek basınç altında burma prosesiyle geliştirilmesi, Post Graduate, H.KÖKLÜ(Student), 2019
Yılmazer H., Thermomechanical processing and its effects on microstructure and biomedical behaviors of β-type titanium alloys, Post Graduate, M.SALAH(Student), 2018

Citations

Total Citations (WOS):256
h-index (WOS):9

Invited Talks

– Significance of Severe Plastic Deformation for Production of Biomedical and Biocompatible Materials, Seminar, Department of Chemical Engineering and Materials Science / Michigan State University, United States Of America, October 2018
Significance of SPD for production of biomedical and biocompatible materials, Workshop, Kyushu University, Japan, September 2018

Research Areas

Mechanical Engineering, Construction and Manufacturing, Non-traditional manufacturing methods, Material, Plastic Forming Methods, Metallurgical and Materials Engineering, Material science and engineering, Corrosion and Corrosion Protection, Polymeric Materials, Biomaterials, Physical Metallurgy, Thermal Treatment, Material Characterization, Metallic Materials, Structure-Property Relationship, Engineering and Technology