Prof. İsmail TEKE

Published journal articles indexed by SCI, SSCI, and AHCI

Applications of the Temperature-Based Solar Radiation Estimation Models in Turkey

JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, vol.42, no.4, pp.413-422, 2021 (SCI-Expanded) Sustainable Development

The Role of Calender Gap in Barrel and Screw Wear in Counterrotating Twin Screw Extruders

Demirci A., TEKE İ., Polychronopoulos N. D., Vlachopoulos J.

POLYMERS, vol.13, no.7, 2021 (SCI-Expanded)

Experimental and numerical investigation of air-side forced convection on wire-on-tube condensers

GÖNÜL A., AĞRA Ö., ATAYILMAZ Ş. Ö., DEMİR H., SEVİNDİR M. K., TEKE İ.

International Journal of Thermal Sciences, vol.151, 2020 (SCI-Expanded)

Global solar radiation estimation from measurements of visibility and air temperature extremes

Ekici C., TEKE İ.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, vol.41, no.11, pp.1344-1359, 2019 (SCI-Expanded)

Gelation of poly(vinyl chloride) inside a single screw extruder and its effect on product properties

Demirci A., TEKE İ., Goger A., Canbaz E., Vlachopoulos J.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, vol.25, 2019 (SCI-Expanded)

Natural convection heat transfer from horizontal concentric and eccentric cylinder systems cooling in the ambient air and determination of inner cylinder location

ATAYILMAZ Ş. Ö., DEMİR H., SEVİNDİR M. K., AĞRA Ö., Teke İ., DALKILIÇ A. S.

Heat and Mass Transfer/Waerme- und Stoffuebertragung, vol.53, no.8, pp.2677-2692, 2017 (SCI-Expanded)

Modelling the optimum distribution of insulation material

SEVİNDİR M. K., DEMİR H., AĞRA Ö., ATAYILMAZ Ş. Ö., Teke İ.

Renewable Energy, vol.113, pp.74-84, 2017 (SCI-Expanded)

Optimum distribution of thermal insulation material for constant insulation material volume or a given investment cost

DEMİR H., SEVİNDİR M. K., AĞRA Ö., ATAYILMAZ Ş. Ö., Teke I.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, vol.7, no.6, 2015 (SCI-Expanded)

Heat capacity ratio and the best type of heat exchanger for geothermal water providing maximum heat transfer

AĞRA Ö., ERDEM H. H., DEMİR H., ATAYILMAZ Ş. Ö., Teke I.

ENERGY, vol.90, pp.1563-1568, 2015 (SCI-Expanded)

Renovating thermal power plant to trigeneration system for district heating/cooling: Evaluation of performance variation

Erdem H. H., Akkaya A. V., Dagdas A., Sevilgen S. H., Çetin B., Şahin B., et al.

APPLIED THERMAL ENGINEERING, vol.86, pp.35-42, 2015 (SCI-Expanded) Sustainable Development

Effects of Bed Height and Particle Size on Drying of a Turkish Lignite

PUSAT Ş., Akkoyunlu M. T., ERDEM H. H., Teke I.

INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION, vol.35, no.4, pp.196-205, 2015 (SCI-Expanded)

Sizing, selection, and comparison of heat exchangers considering the lowest saving-investment ratio corresponding to the area at the tag end of the heat exchanger

Teke I., AĞRA Ö., DEMİR H., ATAYILMAZ Ş. Ö.

Energy, vol.78, pp.114-121, 2014 (SCI-Expanded)

Heat transfer enhancement during downward laminar flow condensation of R134a in vertical smooth and microfin tubes

DALKILIÇ A. S., Teke I., WONGWISES S.

Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, vol.32, no.1, pp.19-31, 2012 (SCI-Expanded)

DETERMINATION OF THE HEAT TRANSFER COEFFICIENT DURING ANNULAR FLOW CONDENSATION IN SMOOTH HORIZONTAL TUBES

AĞRA Ö., TEKE İ.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.32, no.2, pp.151-159, 2012 (SCI-Expanded)

Experimental analysis for the determination of the convective heat transfer coefficient by measuring pressure drop directly during annular condensation flow of R134a in a vertical smooth tube

DALKILIÇ A. S., Teke I., Wongwises S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, vol.54, no.4, pp.1008-1014, 2011 (SCI-Expanded)

Determining the best type of heat exchangers for heat recovery

TEKE İ., AĞRA Ö., ATAYILMAZ Ş. Ö., DEMİR H.

APPLIED THERMAL ENGINEERING, vol.30, pp.577-583, 2010 (SCI-Expanded)

Comparison of frictional pressure drop models during annular flow condensation of R600a in a horizontal tube at low mass flux and of R134a in a vertical tube at high mass flux

DALKILIÇ A. S., AĞRA Ö., Teke I., Wongwises S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, vol.53, pp.2052-2064, 2010 (SCI-Expanded)

Performance analysis and optimization of heat exchangers: a new thermoeconomic approach

ŞAHİN B., ÜST Y., Teke I., ERDEM H. H.

APPLIED THERMAL ENGINEERING, vol.30, pp.104-109, 2010 (SCI-Expanded)

Thermodynamic analysis of an existing coal-fired power plant for district heating/cooling application

Erdem H. H., Dagdas A., Sevilgen S. H., Çetin B., Akkaya A. V., Şahin B., et al.

APPLIED THERMAL ENGINEERING, vol.30, pp.181-187, 2010 (SCI-Expanded) Sustainable Development

Experimental and numerical study of the natural convection from a heated horizontal cylinder wrapped with a layer of textile material

ATAYILMAZ Ş. Ö., Teke I.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.37, no.1, pp.58-67, 2010 (SCI-Expanded)

Comparative energetic and exergetic performance analyses for coal-fired thermal power plants in Turkey

Erdem H. H., Akkaya A. V., Çetin B., Dagdas A., Sevilgen S. H., Şahin B., et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol.48, pp.2179-2186, 2009 (SCI-Expanded) Sustainable Development

Experimental and numerical study of the natural convection from a heated horizontal cylinder

ATAYILMAZ Ş. Ö., Teke I.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.36, no.7, pp.731-738, 2009 (SCI-Expanded)

Currency of district cooling systems and alternative energy sources

Ulusarslan D., Gemici Z., Teke İ.

ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH, vol.23, pp.31-53, 2009 (SCI-Expanded) Sustainable Development

Articles Published in Other Journals

Kombine Isı Pompası-Buhar Türbini Tesisinin Termodinamik ve Ekonomik Etüdü

ŞAHİN B., TEKE İ.

Yıldız Üniversitesi Dergisi, pp.45-55, 1992 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

A STUDY ON THE OPTIMUM INSULATION THICKNESS AND ENERGY SAVINGS OF A RADIANT HEATING PANEL MOUNTED WALL FOR VARIOUS PARAMETERS

KANBUR B. B., ATAYILMAZ Ş. Ö., KOCA A., GEMİCİ Z., TEKE İ.

CLIMAMED VII. Mediterranean Congress of Climatization, İstanbul, Turkey, 3 - 04 October 2013, pp.791-797

RADYANT ISITMA PANELLERİ UYGULAMASI İÇİN BİNALARDAKİ OPTİMUM YALITIM KALINLIKLARININ İNCELENMESİ

KANBUR B. B., ATAYILMAZ Ş. Ö., KOCA A., GEMİCİ Z., TEKE İ.

ULIBTK’13 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013, pp.1493-1497

RADYANT ISITMA PANELLERİNDE AÇIĞA ÇIKAN ISI AKILARININ SAYISAL OLARAK İNCELENMESİ

KANBUR B. B., ATAYILMAZ Ş. Ö., KOCA A., GEMİCİ Z., TEKE İ.

ULIBTK’13 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013, pp.1498-1502

Effects of the nano particle concentration and type on natural convection heat transfer from horizontal concentric cylinder systems cooling in the ambient air

DEMİR H., ATAYILMAZ Ş. Ö., AĞRA Ö., Teke I.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, United States Of America, 9 - 15 November 2012, vol.7, pp.2913-2924

Environmental impact of optimum insulation thickness in buildings

AĞRA Ö., ATAYILMAZ Ş. Ö., DEMİR H., TEKE İ.

World Renewable Energy Congress, 1 - 02 May 2011 Sustainable Development

An experimental apparatus to investigate natural convection heat transfer from a vertical array of isothermal horizontal cylinders

ATAYILMAZ Ş. Ö., DEMİR H., AĞRA Ö., Teke I.

ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Canada, 12 - 18 November 2010, vol.7, pp.461-471

Predicting two phase flow pressure drop with CFD and ANN

Teke I., AĞRA Ö., DEMİR H., ATAYILMAZ Ş. Ö.

ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Canada, 12 - 18 November 2010, vol.7, pp.111-117

Predicting Two Phase Pressure Drop with CFD and ANN

TEKE İ., AĞRA Ö., DEMİR H., ATAYILMAZ Ş. Ö.

ASME International Mechanical Engineering Congress and Exposition, 2010, Vancouver, 12 - 18 November 2010

Comparison of Mathematical Expressions and Experimental Findings for Pressure Drops in the Flow of Low Density Spherical Capsule Train with General Expressions Regarding Spherical Capsule Flows

Ulusarslan D., Teke İ.

The 5th International Conference for Conveying and Handling of Particulate Solids, Naples, Italy, 27 - 31 August 2006, pp.1-12

Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Articles Published in Other Journals

Refereed Congress / Symposium Publications in Proceedings