Metrikler
Yayın
42
Açık Erişim
1
BM Sürdürülebilir Kalkınma Amaçları
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
2021
20211. Applications of the Temperature-Based Solar Radiation Estimation Models in Turkey
Ekici C., TEKE İ.
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS
, cilt.42, sa.4, ss.413-422, 2021 (SCI-Expanded)
2021
20212. The Role of Calender Gap in Barrel and Screw Wear in Counterrotating Twin Screw Extruders
Demirci A., TEKE İ., Polychronopoulos N. D., Vlachopoulos J.
POLYMERS
, cilt.13, sa.7, 2021 (SCI-Expanded)
2020
20203. Experimental and numerical investigation of air-side forced convection on wire-on-tube condensers
GÖNÜL A., AĞRA Ö., ATAYILMAZ Ş. Ö., DEMİR H., SEVİNDİR M. K., TEKE İ.
International Journal of Thermal Sciences
, cilt.151, 2020 (SCI-Expanded)
2019
20194. Global solar radiation estimation from measurements of visibility and air temperature extremes
Ekici C., TEKE İ.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS
, cilt.41, sa.11, ss.1344-1359, 2019 (SCI-Expanded)
2019
20195. Gelation of poly(vinyl chloride) inside a single screw extruder and its effect on product properties
Demirci A., TEKE İ., Goger A., Canbaz E., Vlachopoulos J.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY
, cilt.25, 2019 (SCI-Expanded)
2017
20176. Natural convection heat transfer from horizontal concentric and eccentric cylinder systems cooling in the ambient air and determination of inner cylinder location
ATAYILMAZ Ş. Ö., DEMİR H., SEVİNDİR M. K., AĞRA Ö., Teke İ., DALKILIÇ A. S.
Heat and Mass Transfer/Waerme- und Stoffuebertragung
, cilt.53, sa.8, ss.2677-2692, 2017 (SCI-Expanded)
2017
20177. Modelling the optimum distribution of insulation material
SEVİNDİR M. K., DEMİR H., AĞRA Ö., ATAYILMAZ Ş. Ö., Teke İ.
Renewable Energy
, cilt.113, ss.74-84, 2017 (SCI-Expanded)
2015
20158. Optimum distribution of thermal insulation material for constant insulation material volume or a given investment cost
DEMİR H., SEVİNDİR M. K., AĞRA Ö., ATAYILMAZ Ş. Ö., Teke I.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY
, cilt.7, sa.6, 2015 (SCI-Expanded)
2015
20159. Heat capacity ratio and the best type of heat exchanger for geothermal water providing maximum heat transfer
AĞRA Ö., ERDEM H. H., DEMİR H., ATAYILMAZ Ş. Ö., Teke I.
ENERGY
, cilt.90, ss.1563-1568, 2015 (SCI-Expanded)
2015
201510. Renovating thermal power plant to trigeneration system for district heating/cooling: Evaluation of performance variation
Erdem H. H., Akkaya A. V., Dagdas A., Sevilgen S. H., Çetin B., Şahin B., et al.
APPLIED THERMAL ENGINEERING
, cilt.86, ss.35-42, 2015 (SCI-Expanded)
2015
201511. Effects of Bed Height and Particle Size on Drying of a Turkish Lignite
PUSAT Ş., Akkoyunlu M. T., ERDEM H. H., Teke I.
INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION
, cilt.35, sa.4, ss.196-205, 2015 (SCI-Expanded)
2014
201412. Sizing, selection, and comparison of heat exchangers considering the lowest saving-investment ratio corresponding to the area at the tag end of the heat exchanger
Teke I., AĞRA Ö., DEMİR H., ATAYILMAZ Ş. Ö.
Energy
, cilt.78, ss.114-121, 2014 (SCI-Expanded)
2012
201213. Heat transfer enhancement during downward laminar flow condensation of R134a in vertical smooth and microfin tubes
DALKILIÇ A. S., Teke I., WONGWISES S.
Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology
, cilt.32, sa.1, ss.19-31, 2012 (SCI-Expanded)
2012
201214. DETERMINATION OF THE HEAT TRANSFER COEFFICIENT DURING ANNULAR FLOW CONDENSATION IN SMOOTH HORIZONTAL TUBES
AĞRA Ö., TEKE İ.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY
, cilt.32, sa.2, ss.151-159, 2012 (SCI-Expanded)
2011
201115. Experimental analysis for the determination of the convective heat transfer coefficient by measuring pressure drop directly during annular condensation flow of R134a in a vertical smooth tube
DALKILIÇ A. S., Teke I., Wongwises S.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
, cilt.54, sa.4, ss.1008-1014, 2011 (SCI-Expanded)
2010
201016. Determining the best type of heat exchangers for heat recovery
TEKE İ., AĞRA Ö., ATAYILMAZ Ş. Ö., DEMİR H.
APPLIED THERMAL ENGINEERING
, cilt.30, ss.577-583, 2010 (SCI-Expanded)
2010
201017. Comparison of frictional pressure drop models during annular flow condensation of R600a in a horizontal tube at low mass flux and of R134a in a vertical tube at high mass flux
DALKILIÇ A. S., AĞRA Ö., Teke I., Wongwises S.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
, cilt.53, ss.2052-2064, 2010 (SCI-Expanded)
2010
201018. Performance analysis and optimization of heat exchangers: a new thermoeconomic approach
ŞAHİN B., ÜST Y., Teke I., ERDEM H. H.
APPLIED THERMAL ENGINEERING
, cilt.30, ss.104-109, 2010 (SCI-Expanded)
2010
201019. Thermodynamic analysis of an existing coal-fired power plant for district heating/cooling application
Erdem H. H., Dagdas A., Sevilgen S. H., Çetin B., Akkaya A. V., Şahin B., et al.
APPLIED THERMAL ENGINEERING
, cilt.30, ss.181-187, 2010 (SCI-Expanded)
2010
201020. Experimental and numerical study of the natural convection from a heated horizontal cylinder wrapped with a layer of textile material
ATAYILMAZ Ş. Ö., Teke I.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, cilt.37, sa.1, ss.58-67, 2010 (SCI-Expanded)
2009
200921. Comparative energetic and exergetic performance analyses for coal-fired thermal power plants in Turkey
Erdem H. H., Akkaya A. V., Çetin B., Dagdas A., Sevilgen S. H., Şahin B., et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
, cilt.48, ss.2179-2186, 2009 (SCI-Expanded)
2009
200922. Experimental and numerical study of the natural convection from a heated horizontal cylinder
ATAYILMAZ Ş. Ö., Teke I.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, cilt.36, sa.7, ss.731-738, 2009 (SCI-Expanded)
2009
200923. Currency of district cooling systems and alternative energy sources
Ulusarslan D., Gemici Z., Teke İ.
ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH
, cilt.23, ss.31-53, 2009 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
1992
19921. Kombine Isı Pompası-Buhar Türbini Tesisinin Termodinamik ve Ekonomik Etüdü
ŞAHİN B., TEKE İ.
Yıldız Üniversitesi Dergisi , ss.45-55, 1992 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2013
20131. A STUDY ON THE OPTIMUM INSULATION THICKNESS AND ENERGY SAVINGS OF A RADIANT HEATING PANEL MOUNTED WALL FOR VARIOUS PARAMETERS
KANBUR B. B., ATAYILMAZ Ş. Ö., KOCA A., GEMİCİ Z., TEKE İ.
CLIMAMED VII. Mediterranean Congress of Climatization, İstanbul, Türkiye, 3 - 04 Ekim 2013, ss.791-797, (Tam Metin Bildiri)
2013
20132. RADYANT ISITMA PANELLERİ UYGULAMASI İÇİN BİNALARDAKİ OPTİMUM YALITIM KALINLIKLARININ İNCELENMESİ
KANBUR B. B., ATAYILMAZ Ş. Ö., KOCA A., GEMİCİ Z., TEKE İ.
ULIBTK’13 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.1493-1497, (Tam Metin Bildiri)
2013
20133. RADYANT ISITMA PANELLERİNDE AÇIĞA ÇIKAN ISI AKILARININ SAYISAL OLARAK İNCELENMESİ
KANBUR B. B., ATAYILMAZ Ş. Ö., KOCA A., GEMİCİ Z., TEKE İ.
ULIBTK’13 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.1498-1502, (Tam Metin Bildiri)
2012
20124. Effects of the nano particle concentration and type on natural convection heat transfer from horizontal concentric cylinder systems cooling in the ambient air
DEMİR H., ATAYILMAZ Ş. Ö., AĞRA Ö., Teke I.
ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.7, ss.2913-2924, (Tam Metin Bildiri)
2011
20115. Environmental impact of optimum insulation thickness in buildings
AĞRA Ö., ATAYILMAZ Ş. Ö., DEMİR H., TEKE İ.
World Renewable Energy Congress, 1 - 02 Mayıs 2011, (Tam Metin Bildiri)
2010
20106. Predicting two phase flow pressure drop with CFD and ANN
Teke I., AĞRA Ö., DEMİR H., ATAYILMAZ Ş. Ö.
ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Kanada, 12 - 18 Kasım 2010, cilt.7, ss.111-117, (Tam Metin Bildiri)
2010
20107. An experimental apparatus to investigate natural convection heat transfer from a vertical array of isothermal horizontal cylinders
ATAYILMAZ Ş. Ö., DEMİR H., AĞRA Ö., Teke I.
ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Kanada, 12 - 18 Kasım 2010, cilt.7, ss.461-471, (Tam Metin Bildiri)
2010
20108. Predicting Two Phase Pressure Drop with CFD and ANN
TEKE İ., AĞRA Ö., DEMİR H., ATAYILMAZ Ş. Ö.
ASME International Mechanical Engineering Congress and Exposition, 2010, Vancouver, 12 - 18 Kasım 2010, (Tam Metin Bildiri)
2006
20069. Experimental Set-Up and Capsule Feeding System Designed for Spherical Capsule Train Flows
Ulusarslan D., Teke İ.
The 5th International Conference for Conveying and Handling of Particulate Solids, Naples, İtalya, 27 - 31 Ağustos 2006, ss.1-8, (Tam Metin Bildiri)
2006
200610. Comparison of Mathematical Expressions and Experimental Findings for Pressure Drops in the Flow of Low Density Spherical Capsule Train with General Expressions Regarding Spherical Capsule Flows
Ulusarslan D., Teke İ.
The 5th International Conference for Conveying and Handling of Particulate Solids, Naples, İtalya, 27 - 31 Ağustos 2006, ss.1-12, (Tam Metin Bildiri)
1998
199811. Boru Üretimindeki Kaynak Süreçlerinde Isı Olayları
Mamedov S., Koyun A., Varol S., Teke İ., Alekberov V., Belen H., et al.
II.Ulusal Atom ve Molekül Fiziği Sempozyumu (Sözlü Bildiri), Ankara, Türkiye, 9 - 11 Eylül 1998, ss.34, (Özet Bildiri)
0
0