The dependence of hot deformation-recrystallisation properties of Al-6063 (Etial-60) alloy on homogenisation practice


Erarslan Y., Çiğdem M.

ZEITSCHRIFT FUR METALLKUNDE, cilt.93, sa.1, ss.28-32, 2002 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 93 Sayı: 1
  • Basım Tarihi: 2002
  • Doi Numarası: 10.3139/146.020028
  • Dergi Adı: ZEITSCHRIFT FUR METALLKUNDE
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.28-32
  • Yıldız Teknik Üniversitesi Adresli: Evet

Özet

In this work, the effect of the cooling rate after homogenisation on the critical defomation ratio, maximum grain size and recrystallisation grain size has been studied. Experimental results have revealed that hot deformation - restoration properties and recrystallised grain structures are affected to a great extend by the cooling rate. The values of the critical defomation ratio and maximum grain size of a hot rolled specimen cooled at a rate of 0.9 K/min were found to be 23 % and 1.3 mm while those for a specimen cooled at 6 K/min were measured as 37 % and 0.8 mm, respectively.