Prof. Dr. Alper UYSAL

JOURNAL OF COMPOSITE MATERIALS , cilt.52, sa.20, ss.2719-2727, 2018 (SCI-Expanded)

Influence of cutting temperature when drilling carbon black reinforced polyamides

MATERIALS TESTING , cilt.60, sa.6, ss.627-632, 2018 (SCI-Expanded)

An Experimental Study on Mechanical Behavior of Nanographene/Epoxy Nanocomposites

Altan M., UYSAL A.

ADVANCES IN POLYMER TECHNOLOGY , cilt.37, sa.4, ss.1061-1066, 2018 (SCI-Expanded)

Effects of cutting parameters on drilling performance of carbon black-reinforced polymer composite

Uysal A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.232, ss.1133-1142, 2018 (SCI-Expanded)

Effects of nano graphene particles on surface roughness and cutting temperature during MQL milling of AISI 430 stainless steel

MATERIALS TESTING , cilt.60, sa.5, ss.533-537, 2018 (SCI-Expanded)

Investigation into the effectiveness of cutting parameters on wear regions of the flank wear curve and associated cutting tool life improvement

Altan E., Uysal A., Çalışkan O.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.57, ss.54-70, 2018 (SCI-Expanded)

Surface Roughness in Nanofluid Minimum Quantity Lubrication Milling of AISI 430 Ferritic Stainless Steel

JOURNAL OF TESTING AND EVALUATION , cilt.45, sa.3, ss.933-939, 2017 (SCI-Expanded)

Investigation of cutting temperature in minimum quantity lubrication milling of ferritic stainless steel by using multi wall carbon nanotube reinforced cutting fluid

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.32, sa.3, ss.645-650, 2017 (SCI-Expanded)

Effect of work hardening of cobalt in sintered carbide cutting tool on tool failure during interrupted cutting

ALTAN E., UYSAL A., ANAC S. H., Ozturk S.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.88, ss.359-367, 2017 (SCI-Expanded)

Slip-line field modelling of rounded-edge cutting tool for orthogonal machining

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.230, ss.1925-1941, 2016 (SCI-Expanded)

Cutting parameters for optimum surface roughness during end milling of carbon fiber reinforced composites

MATERIALS TESTING , cilt.58, sa.6, ss.588-593, 2016 (SCI-Expanded)

Surface Roughness in Drilling of Electrically Conductive Polyamide

ACTA PHYSICA POLONICA A , cilt.129, ss.442-444, 2016 (SCI-Expanded)

Investigation of Surface Roughness and Chip Forms in Milling of Stainless Steel by MQL Method

Uysal A., Demıren F., Altan E.

ACTA PHYSICA POLONICA A , cilt.129, ss.439-441, 2016 (SCI-Expanded)

Investigation of flank wear in MQL milling of ferritic stainless steel by using nano graphene reinforced vegetable cutting fluid

INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.68, sa.4, ss.446-451, 2016 (SCI-Expanded)

Quality during milling of a glass fiber reinforced polymer composite

UYSAL A., Altan M.

MATERIALS TESTING , cilt.57, sa.9, ss.767-772, 2015 (SCI-Expanded)

Surface Roughness of Milled Sheet Molding Compound Composites

UYSAL A., ALTAN M.

ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1218-1220, 2015 (SCI-Expanded)

An experimental study on dead metal zone in orthogonal cutting with worn rounded-edge cutting tools

Uysal A., Ozturk S., Altan E.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.51, ss.401-412, 2015 (SCI-Expanded)

A Study on Drilling of AISI 304L Stainless Steel with Nanocomposite-Coated Drill Tools

Uysal A.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.39, sa.11, ss.8279-8285, 2014 (SCI-Expanded)

Experimental investigation of a slip-line field model for a worn cutting tool

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.228, ss.1398-1404, 2014 (SCI-Expanded)

Effects of process parameters on surface roughness in saw cutting of polypropylene/TiO2 nano composites

ALTAN M., UYSAL A., ALTAN E.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.36, sa.3, ss.615-621, 2014 (SCI-Expanded)

A NEW SLIP-LINE FIELD MODELING OF ORTHOGONAL MACHINING WITH A ROUNDED-EDGE WORN CUTTING TOOL

MACHINING SCIENCE AND TECHNOLOGY , cilt.18, ss.386-423, 2014 (SCI-Expanded)

Metallographic Analysis of the Dead Metal Zone In Metal Cutting With a Rounded-Edge Tool

Ozturk S., UYSAL A., ALTAN E.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.50, sa.5, ss.318-330, 2013 (SCI-Expanded)

Effects of cutting parameters on tool wear in drilling of polymer composite by Taguchi method

UYSAL A., ALTAN M., ALTAN E.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.58, ss.915-921, 2012 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Examining the Effect of the Fe3O4-Doped Nanofluid MQL Method on the Machining Performance of Al-Mg-Si Alloy

Yücel M., Aydın A., Sağdıç Ö. F., Yapan Y. F., Uysal A.

Advances in Machinery, Materials Science and Engineering Application X , cilt.58, ss.148-153, 2024 (Scopus) Sürdürülebilir Kalkınma

Surface Roughness Assessment After Milling of Pure and Carbon Black Reinforced Polypropylene Materials

Akın A. H., Yapan Y. F., Kusyj Y., Ivanov V., Uysal A.

LECTURE NOTES IN MECHANICAL ENGINEERING , cilt.1, ss.251-263, 2023 (Scopus)

Dimensional Accuracy of Porous Structures Manufactured Using Air Controller

EMİR E., BAHÇE E., UYSAL A., Dzhemilov E.

LECTURE NOTES IN MECHANICAL ENGINEERING , ss.90-97, 2022 (Scopus)

Ensuring the Quality of Conical Mating Surfaces Processing by Diamond Honing

Dzhemilov E., UYSAL A., Yakubov C., Dzhemalyadinov R.

LECTURE NOTES IN MECHANICAL ENGINEERING , ss.232-241, 2022 (Scopus)

Improvement of the MQL Efficiency in Machining Stainless Steel by Adding Nanoparticles to the Cutting Fluid

Touggui Y., UYSAL A., EMİROĞLU U., Dzhemilov E., Belhadi S.

LECTURE NOTES IN MECHANICAL ENGINEERING , ss.219-228, 2021 (Scopus)

An Experimental and Statistical Investigation on Cutting Forces in Turning of AISI 304 Stainless Steel under Dry, MQL and Nanofluid MQL Conditions

Touggui Y., UYSAL A., EMİROĞLU U., Dzhemilov E.

LECTURE NOTES IN MECHANICAL ENGINEERING , cilt.1, ss.513-522, 2021 (Scopus)

Cutting and Thrust Forces in Face Turning of Ti6Al4V under Various Cutting Environments

UYSAL A., Dzhemilov E., Dzhemalyadinov R.

Sigma Journal of Engineering and Natural Sciences , cilt.39, sa.1, ss.39-44, 2021 (ESCI)

Minimizing Surface Roughness and Radius Error in Laser Cutting of EN10346 Steel Plate

Kangal A. M., UYSAL A., Dzhemilov E., Dzhemalyadinov R.

Lecture Notes in Mechanical Engineering: Advanced Manufacturing Processes II , cilt.1, sa.1, ss.394-401, 2021 (Scopus)

Effect of MWCNT on Surface Roughness and Burr Height in MQL Milling of AISI 430 Ferritic Stainless Steel

Ukrainian Journal of Mechanical Engineering and Materials Science , cilt.6, sa.1, ss.8-13, 2020 (Hakemli Dergi)

The Influence of Milling Parameters on Cutting Forces in High-speed Milling of Polymer Materials

UYSAL A., Dzhemilov E., Dzhemalyadinov R.

LECTURE NOTES IN MECHANICAL ENGINEERING , cilt.1, ss.462-470, 2020 (Scopus)

Multi-objective optimization of turning parameters for targeting surface roughness and maximizing material removal rate in dry turning of AISI 316L with PVD-coated cermet insert

Touggui Y., Belhadi S., Mechraoui S., Uysal A., Yallese M. A., Temmar M.

SN APPLIED SCIENCES , cilt.2, 2020 (ESCI)

Minimizing Carbon Emissions and Machining Costs with Improved Human Health in Sustainable Machining of Austenitic Stainless Steel through Multi-objective Optimisation

UYSAL A., Caudill J. R., Schoop J., Jawahir I. S.

INTERNATIONAL JOURNAL OF SUSTAINABLE MANUFACTURING , cilt.4, sa.2-4, ss.281-299, 2020 (Scopus)

Analyzing Optimum Process Parameters in Laser Cutting of EN10025-2 Steel Plate

Kangal A. M., UYSAL A.

Journal of Advances in Manufacturing Engineering , cilt.1, sa.1, ss.23-28, 2020 (Hakemli Dergi)

An Investigation of Process Performance when Drilling Carbon Fiber Reinforced Polymer (CFRP) Composite under Dry, Cryogenic and MQL Environments

Nagaraj A., UYSAL A., Jawahir I. S.

PROCEDIA MANUFACTURING , cilt.43, ss.551-558, 2020 (Scopus)

Validation of the Slip-line Model for Serrated Chip Formation in Orthogonal Turning under Dry and MQL Conditions

Uysal A., Jawahir I.

Procedia CIRP , cilt.82, ss.124-129, 2019 (Hakemli Dergi)

Alüminyum 6061 Malzemenin MQL Yöntemi ile Frezelenmesinde Nano MoS2 Katkılı Kesme Sıvısı Kullanımının Kesme Kuvvetleri ve Yüzey Pürüzlülüğüne Etkilerinin İncelenmesi

Conger D. B., EMİROĞLU U., UYSAL A., ALTAN E.

Makina Tasarım ve Imalat Dergisi , cilt.17, sa.1, ss.31-37, 2019 (Hakemli Dergi)

An Experimental Study on Cutting Temperature and Burr in Milling of Ferritic Stainless Steel under MQL using Nano Graphene Reinforced Cutting Fluid

Advanced Materials Proceedings , cilt.2, sa.9, ss.560-563, 2017 (Hakemli Dergi)

Ferritik Paslanmaz Çeliğin Nano MoS2 Parçacık Takviyeli Kesme Sıvısı Kullanılarak MQL Yöntemi ile Frezelenmesinde Yüzey Pürüzlülüğünün İncelenmesi

DUMF Mühendislik Dergisi , cilt.7, ss.151-158, 2016 (Hakemli Dergi)

Karbon Siyahı Takviyeli Elektriği İleten Polipropilen Kompozite Delik Delinmesinde İşlem Parametrelerinin İncelenmesi

Politeknik Dergisi , cilt.18, ss.241-249, 2015 (Hakemli Dergi)

Effect of Ploughing Force on Cutting Forces in Micro-Milling with a Rounded-Edge Cutting Tool

Materials Today: Proceedings , cilt.2, sa.1, ss.224-229, 2015 (Hakemli Dergi)

Applying Minimum Quantity Lubrication MQL Method on Milling of Martensitic Stainless Steel by Using Nano Mos2 Reinforced Vegetable Cutting Fluid

Uysal A., Furkan D., Altan E.

Procedia - Social and Behavioral Sciences , cilt.195, ss.2742-2747, 2015 (Hakemli Dergi)

RELATION BETWEEN DRILL BIT TEMPERATURE AND CHIP FORMS IN DRILLING OF CARBON BLACK REINFORCED POLYAMIDE

JOURNAL OF THERMAL ENGINEERING , cilt.1, sa.7, ss.655-658, 2015 (ESCI)

Kesici Ağzı Yuvarlatılmış Aşınmış Takımlarla Ortogonal Talaş Kaldırmada Kesme Kuvvetlerinin Deneysel İncelenmesi

Sigma Mühendislik ve Fen Bilimleri Dergisi , cilt.31, ss.350-362, 2013 (Hakemli Dergi) Sürdürülebilir Kalkınma

Effects of Micro and Nano Inorganics Particles on the Mechanical Properties of Polypropylene

ALTAN M., Yildirim H., UYSAL A.

Academic Journal of Science , cilt.1, sa.3, ss.15-24, 2012 (Hakemli Dergi)

A Slip Line Approach to the Micro Cutting Process with a Rounded Edge Tool

UYSAL A., ÖZTÜRK S., ALTAN E.

Advanced Materials Research , cilt.445, ss.56-61, 2012 (Scopus)

Analysis of Variance and Linear Regression Models of Cutting Forces in Orthogonal Cutting with Rounded Edge Worn Cutting Tools

Academic Journal of Science , cilt.1, sa.3, ss.7-13, 2012 (Hakemli Dergi)

Tensile Properties of Polypropylene Metal Oxide Nano Composites

ALTAN M., YILDIRIM H., UYSAL A.

The Online Journal of Science and Technology , cilt.1, sa.1, ss.25-30, 2011 (Hakemli Dergi)

Investigation of the Effects of Cutting Parameters on Surface Roughness in Drilling of Polymer Composite Materials

International Journal of Arts & Sciences , cilt.3, sa.1, ss.27-32, 2009 (Hakemli Dergi)

Biyolojik İmalat Sistemleri

TT Magazin , cilt.1, sa.25, ss.64-68, 2008 (Hakemli Dergi)

Biyolojik Talaş Kaldırma Yöntemi

Mühendis ve Makina , cilt.1, sa.583, ss.17-22, 2008 (Hakemli Dergi)

Rüzgar Türbini Rotor Kanatlarında Kullanılan Malzemeler

Akdogan A., UYSAL A., Eker B.

MakinaTek , cilt.1, sa.123, ss.92-98, 2008 (Hakemli Dergi)

Yatay Eksenli Rüzgar Türbini Bileşenleri

UYSAL A., Akdogan A., Eker B.

Electrotech , cilt.1, sa.165, ss.158-166, 2008 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

An Impact of the Cutting Fluid Supply on Contact Processes During Drilling AISI 321 Stainless Steel

Dzhemilov E., Bekirov E., Dzhemalyadinov R., UYSAL A.

5th Grabchenko’s International Conference on Advanced Manufacturing Processes, InterPartner-2023, Odessa, Ukrayna, 5 - 08 Eylül 2023, ss.145-153

Ensuring Tool Run-In When Milling AISI321 Steel in Various Technological Environments

Dzhemilov E., UYSAL A., ÇAKIR O., Dzhemalyadinov R., Vaniev E.

7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE 2024, Pilsen, Çek Cumhuriyeti, 4 - 07 Haziran 2024, ss.188-199

Effects of Cutting Parameters on Surface Roughness and Flank Wear in Face Turning of Inconel 718

Usluer E., İrfan Ö., UYSAL A., Dzhemalyadinov R., Dzhemilov E.

17th International Conference on Interdisciplinarity in Engineering, INTER-ENG 2023, Targu-Mures, Romanya, 5 - 06 Ekim 2023, cilt.926 LNNS, ss.69-78

Dimensional Accuracy of Porous Structures Manufactured Using Air Controller

Emir E., BAHÇE E., UYSAL A., Dzhemilov E.

4th Grabchenko’s International Conference on Advanced Manufacturing Processes, InterPartner 2022, Odessa, Ukrayna, 6 - 09 Eylül 2022, ss.90-97

An Impact of the Cutting Fluid Supply on Contact Processes During Drilling

Dzhemilov E., Bekirov E., UYSAL A., Dzhemalyadinov R.

6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE 2023, High Tatras, Slovakya, 6 - 09 Haziran 2023, ss.195-204

Improving the Accuracy of Deep Hole Machining by Diamond Honing Process in 41Cr4 Steel Parts

Dzhemilov E., Uysal A.

International Conference on Modern Trends in Manufacturing Technologies and Equipment 2020 (ICMTMTE 2020), Sevastopol, Ukrayna, 7 - 11 Eylül 2020, cilt.971, ss.1-5

Delamination Factors in Drilling of Small Holes on GFRP Composite Produced by Additive Manufacturing Method

Ozcakir B., EMİROĞLU U., UYSAL A.

5th International Conference on Advances in Mechanical Engineering: ICAME 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.253-257

An Experimental Research on MQL Milling of Al6061 through Double Nozzles

Conger D. B., EMİROĞLU U., UYSAL A., ALTAN E.

10th International Symposium on Machining (UTIS 2019), Antalya, Türkiye, 7 - 09 Kasım 2019, ss.287-292

Serrated Chip Formation in Turning of AISI 304 Stainless Steel under Various Cooling/Lubricating Conditions

10th International Symposium on Machining (UTIS 2019), Antalya, Türkiye, 7 - 09 Kasım 2019, ss.357-362

ANOVA Optimization of Drill Bit Temperature in Drilling of Pure and Carbon Black Reinforced High Density Polyethylene

14th International Conference of Constructive Design and Technological Optimization in Machine Building (OPROTEH 2019), Bacau, Romanya, 22 - 24 Mayıs 2019

An Experimental Study on Cutting Forces and Surface Roughness in MQL Milling of Aluminum 6061

Conger D. B., EMİROĞLU U., UYSAL A., ALTAN E.

16th International Scientific Congress: Machines, Technologies, Materials (MTM 2019), Borovets, Bulgaristan, 13 - 16 Mart 2019, ss.67-70

Cutting Forces in Sustainable Turning of AISI 304 Austenitic Stainless Steel

4th International Conference on Advances in Mechanical Engineering (ICAME 2018), İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1146-1149

Multi-objective Optimization of Insert Clamping Methods and Cutting Parameters in Turning of AISI 1040 Carbon Steel

UYSAL A., ERYILDIZ E., ALTAN E.

4th International Conference on Advances in Mechanical Engineering (ICAME 2018), İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1227-1233

A Slip-line Model for Serrated Chip Formation in Machining with Sharp Cutting Tool and Validation

UYSAL A., CAUDİLL J. R., JAWAHİR I. S.

4th International Conference on Advances in Mechanical Engineering (ICAME 2018), İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1150-1155

Optimization of Carbon Emissions, Human Health and Coolant/Lubricant Costs in Sustainable Machining of Austenitic Stainless Steel

9th International Symposium On Machining (UTIS 2018), Antalya, Türkiye, 8 - 10 Kasım 2018, ss.367-376 Sürdürülebilir Kalkınma

Martenzitik Paslanmaz Çeliğin MQL Yöntemi Kullanılarak Frezelenmesinde Kesme Sıvısına MWCNT Katkısının Takım Aşınması Değerlendirilerek İncelenmesi

UYSAL A., DEMİREN F., ALTAN E.

9th International Symposium On Machining (UTIS 2018), Antalya, Türkiye, 11 Ağustos - 11 Ekim 2018, ss.312-317 Sürdürülebilir Kalkınma

Epoksi Esaslı Nanokompozitlerin Yüksek Hızlı Frezelenmesinde MWCNT ve Nano Grafen Katkısının Kesme Kuvvetleri ve Yüzey Pürüzlülüğüne Etkileri

EMİROĞLU U., UYSAL A., ALTAN E.

8th International Symposium On Machining (UTIS 2017), Antalya, Türkiye, 2 - 04 Kasım 2017, ss.265-272

POM ve PE Polimer Malzemelerin Delinmesinde Yüzey Pürüzlülüğü

Çelikyay N. B., UYSAL A., ÇAKIR O.

8th International Symposium On Machining (UTIS 2017), Antalya, Türkiye, 2 - 04 Kasım 2017, ss.219-224

Drill Tool Flank Wear in Drilling of Pure and Carbon Black Reinforced High Density Polyethylene

International Science and Technology Conference (ISTEC 2017), Berlin, Almanya, 17 - 19 Temmuz 2017

Cutting Temperature in MQL Milling of Ferritic Stainless Steel When Using Nano MoS2 Reinforced Cutting Fluid

International Conference On Energy and Thermal Engineering: Istanbul 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.446-449

An Experimental Study on Cutting Temperature and Chip Forms in Drilling Carbon Black Reinforced HDPE Composite

International Conference On Energy and Thermal Engineering: Istanbul 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.450-455

MWCNT Katkılı Nanokompozit ile Kesici Ucu Yapıştırılmış Takımların Tornalama Performanslarının Deneysel İncelenmesi

ERYILDIZ E., UYSAL A., ALTAN E.

7th International Symposium On Machining (UTIS 2016), İstanbul, Türkiye, 3 - 05 Kasım 2016, ss.394-401

Karbon Çeliğinin Frezelenmesinde Talaş Kaldırma Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin İstatistiksel Olarak İncelenmesi

EMİROĞLU U., UYSAL A.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.1431-1437

Surface Roughness in Milling of AISI 430 Stainless Steel by MQL Method Using MWCNT Reinforced Vegetable Cutting Fluid

The 17th International Conference on Machine Design and Production, Bursa, Türkiye, 12 - 15 Temmuz 2016

A Study on Shear Strength of Single Lap Joints Bonded by Nano Graphene Reinforced Epoxy Adhesive

ERYILDIZ E., UYSAL A., ALTAN E.

2nd International Conference on Advances in Mechanical Engineering (ICAME2016), İstanbul, Türkiye, 10 - 13 Mayıs 2016, ss.207-210

An Experimental Study on Drill Temperature in Drilling of Pure and Carbon Black Reinforced Polymers

2nd International Conference on Advances in Mechanical Engineering (ICAME2016), İstanbul, Türkiye, 10 - 13 Mayıs 2016, ss.371-375

AISI 304 Paslanmaz Çeliğin Nano Grafen Katkılı Bitkisel Esaslı Kesme Sıvısı ve MQL Yöntemi Kullanılarak Frezelenmesinde Takım Aşınması

UYSAL A., Furkan D., ALTAN E.

6. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2015), Türkiye, 5 - 07 Kasım 2015, ss.356-363 Sürdürülebilir Kalkınma

Yalın ve Karbon Siyahı Katkılı Polipropilen ve Polyamid Malzemelerin Matkapla Delinmesinde Takım Aşınması

1. Ulusal Plastik Teknolojileri Sempozyumu: Plastikler, Polimer Kompozitler, Şekillendirme Teknolojileri (UPTS’2015), Türkiye, 15 - 16 Ekim 2015, ss.181-188 Sürdürülebilir Kalkınma

Investigating the Effects of Drilling Parameters on Drill Bit Temperature in Drilling of Carbon Black Reinforced Polyamide using Taguchi Method

International Conference on Computing, Mechanical and Electronics Engineering, Singapore, Singapur, 9 - 10 Temmuz 2015, ss.11-16

Kesici Kenarı Yuvarlatılmış Aşınmış Takım ile Talaş Kaldırmada Dalma Kuvveti

5. Ulusal Talaşlı İmalat Sempozyumu, Bursa, Türkiye, 23 - 25 Ekim 2014, ss.181-189 Sürdürülebilir Kalkınma

Kesici Kenarı Yuvarlatılmış Takımlar ile Ortogonal Talaş Kaldırmada Ölü Bölge Oluşumunun Deneysel İncelenmesi

UYSAL A., ÖZTÜRK S., ALTAN E.

4. Ulusal Talaşlı İmalat Sempozyumu, Türkiye, 7 - 09 Kasım 2013, cilt.1, ss.259-266

Aşınmış Kesici Takımlar ile Ortogonal Talaş Kaldırmada Kesme Kuvvetlerinin Deneysel İncelenmesi

3. Ulusal Tasarım İmalat ve Analiz Kongresi, Türkiye, 29 - 30 Kasım 2012, cilt.1, ss.145-152 Sürdürülebilir Kalkınma

Ultra Yüksek Moleküler Ağrılıklı Polietilenin Matkapla Delinmesinde Delik Hassasiyetinin Pratik Bir Yöntemle Belirlenmesi

ALTAN M., UYSAL A.

3. Ulusal Tasarım İmalat ve Analiz Kongresi, Türkiye, 29 - 30 Kasım 2012, cilt.1, ss.153-159

Prediction of Chip Thickness and Chip Up Curl Radius by a New Slip Line Field Model for Orthogonal Machining with Sharp Cutting Tool

2nd International Scientific Conference on Engineering: Manufacturing and Advanced Technologies, 22 - 24 Kasım 2012, cilt.1, ss.51-54

Ortogonal Talaş Kaldırmada Kesici Ağız Yuvarlatma Yarıçapının Kesme Kuvvetlerine Etkilerinin Deneysel İncelenmesi

3. Ulusal Talaşlı İmalat Sempozyumu, Türkiye, 4 - 05 Ekim 2012, cilt.1, ss.302-312

Yüksek Manganlı Çeliğin Kesici Ağzı Yuvarlatılmış Sert Metal Takımlar ile Ortogonal Tornalanmasında Takım Ömrü

Kiyak M., UYSAL A., ÇAKIR O., ALTAN E.

3. Ulusal Talaşlı İmalat Sempozyumu, Türkiye, 4 - 05 Ekim 2012, cilt.1, ss.496-502

Frezeleme İşleminde Kesme ve İlerleme Hızlarının Yüzey Pürüzlülüğü Üzerine Etkilerinin İncelenmesi

Kiyak M., UYSAL A., ÇAKIR O.

The 15th International Conference on Machine Design and Production, 19 - 22 Haziran 2012, cilt.3, ss.1173-1181

Nano Partikül Takviyeli Polimer Matrisli Kompozitlerin Testere ile Kesilmesinde İşlem Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin İncelenmesi

ALTAN M., UYSAL A., ALTAN E.

VI. Makina Tasarım ve İmalat Teknolojileri Kongresi, Türkiye, 22 - 23 Ekim 2011, cilt.1, ss.375-379

A New Slip Line Field Modeling of Orthogonal Machining for a Worn Tool