Prof. Dr. Bünyamin AKSAKAL

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 70

1. ZrN and ta-C coatings on titanium for biomedical applications: Improved adhesion, corrosion, antibacterial activity, and cytotoxicity properties

Aslan N., Aksakal B., Cihangir S., Cetin F., Yilmazer Y.

Journal of Materials Research , cilt.38, sa.16, ss.3923-3936, 2023 (SCI-Expanded)

2. Silver/selenium/chitosan co-substituted bioceramic coatings of Ni-Ti alloy: Antibacterial efficiency and cell viability

SAY Y., AKSAKAL B., Sinirlioglu Z. A.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY , cilt.19, sa.5, ss.2701-2712, 2022 (SCI-Expanded)

3. Boron-Doped Hydroxyapatite Coatings on NiTi Alloys Using the Electrophoretic Deposition Method: Enhanced Corrosion and Adhesion Performances

Aksoy M. E., Aksakal B., Aslan N., Dikici B.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.30, sa.10, ss.7365-7375, 2021 (SCI-Expanded)

4. Enhanced Adhesion and Corrosion Properties of Boron Doped Bioceramic Coated 316L Implants

Aksoy M. E., Aksakal B., Aslan N., Dikici B.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.57, sa.5, ss.1040-1050, 2021 (SCI-Expanded)

5. Effect of graphene reinforcement on hybrid bioceramic coating deposited on the produced porous Ti64 alloys

Aslan N., Aksakal B.

JOURNAL OF POROUS MATERIALS , cilt.28, ss.1301-1313, 2021 (SCI-Expanded)

6. Fabrication of porous-Ti6Al4V alloy by using hot pressing technique and Mg space holder for hard-tissue biomedical applications

Aslan N., Aksakal B., Findik F.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , cilt.32, sa.7, 2021 (SCI-Expanded)

7. Enhanced corrosion properties of biological NiTi alloy by hydroxyapatite and bioglass based biocomposite coatings

Say Y., AKSAKAL B.

Journal of Materials Research and Technology , cilt.9, sa.2, ss.1742-1749, 2020 (SCI-Expanded)

8. Synthesizing the strontium carbonate and silver doped bioceramic bone graft: Structure-properties and cell viability

Demirel M., Kaya A. İ., AKSAKAL B.

International Journal of Applied Ceramic Technology , cilt.17, sa.1, ss.333-341, 2020 (SCI-Expanded)

9. Silver/Selenium/Chitosan-doped Hydroxyapatite coatings on biological NiTi alloy: In vitro biodegradation analysis

Say Y., AKSAKAL B.

Journal of Sol-Gel Science and Technology , cilt.90, sa.2, ss.434-442, 2019 (SCI-Expanded)

10. Electrical characterization of solar sensitive zinc oxide doped-amorphous carbon photodiode

KOÇ M. M., ASLAN N., ERKOVAN M., AKSAKAL B., Uzun O., Farooq W. A., et al.

Optik , cilt.178, ss.316-326, 2019 (SCI-Expanded)

11. In vitro study of antimicrobial and cell viability on newly synthesized bioglass-based bone grafts: Effects of selenium and silver additions

AKSAKAL B., Demirel M.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE , cilt.232, sa.10, ss.1039-1047, 2018 (SCI-Expanded)

12. Synthesizing selenium- and silver-substituted hydroxyapatite-based bone grafts and their effects on antibacterial efficiency and cell viability

AKSAKAL B., Demirel M., Sinirlioglu Z. A.

BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK , cilt.63, sa.3, ss.291-300, 2018 (SCI-Expanded)

13. Synthesis and Characterization of Hydroxyapatite/TiO2 Coatings on the beta-Type Titanium Alloys with Different Sintering Parameters using Sol-Gel Method

DİKİCİ B., Niinomi M., Topuz M., Say Y., AKSAKAL B., YILMAZER H., et al.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.54, sa.3, ss.457-462, 2018 (SCI-Expanded)

14. Effect of porosity on the structure, mechanical properties and cell viability of new bioceramics as potential bone graft substitutes

Demirel M., AKSAKAL B.

ACTA OF BIOENGINEERING AND BIOMECHANICS , cilt.20, sa.2, ss.11-22, 2018 (SCI-Expanded)

15. Effects of powder particle size on mechanostructure and cell viability of the synthesised bioceramic bone grafts

Demirel M., AKSAKAL B.

JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.19, sa.1, ss.5-10, 2018 (SCI-Expanded)

16. Biodegradation of hydroxyapatite coated Rex-734 alloy with silver and selenium/chitosan substitutions: In vitro analysis

AKSAKAL B., Say Y., Buyukpinar C., BAKIRDERE S.

CERAMICS INTERNATIONAL , cilt.43, sa.15, ss.12609-12615, 2017 (SCI-Expanded)

17. The effect of Zirconia/Yttria/Silver substitutions on mechanostructure and cell viability of the synthesized bioceramic bone grafts

AKSAKAL B., DEMIREL M.

CERAMICS INTERNATIONAL , cilt.43, sa.10, ss.7482-7487, 2017 (SCI-Expanded)

18. The effect and characterization of newly synthesized SrBr2 reinforced bone grafts on structure and cell viability

Demirel M., Aksakal B., Kaya A. I.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY , cilt.82, sa.2, ss.602-610, 2017 (SCI-Expanded)

19. Synthesis and characterization of Bioglass-based bone grafts with Gelatine substitution for biomedical applications

AKSAKAL B., DEMIREL M.

BIO-MEDICAL MATERIALS AND ENGINEERING , cilt.28, sa.2, ss.159-168, 2017 (SCI-Expanded)

20. Synthesizing and characterization of nano-Graphene Oxide-reinforced Hydroxyapatite Coatings on laser treated Ti6Al4V surfaces

bülbül E., AKSAKAL B.

ACTA OF BIOENGINEERING AND BIOMECHANICS , cilt.19, sa.4, ss.171-180, 2017 (SCI-Expanded)

21. Effect of hydroxyapatite/SiO2 hybride coatings on surface morphology and corrosion resistance of REX-734 alloy

Say Y., AKSAKAL B., Dikici B.

CERAMICS INTERNATIONAL , cilt.42, sa.8, ss.10151-10158, 2016 (SCI-Expanded)

22. Effects of hydroxyapatite/Zr and bioglass/Zr coatings on morphology and corrosion behaviour of Rex-734 alloy

Say Y., AKSAKAL B.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , cilt.27, sa.6, 2016 (SCI-Expanded)

23. The synthesis of eggshell-derived nano- and microscale hydroxyapatite bioceramic bone grafts

Demirel M., AKSAKAL B.

Journal of Sol-Gel Science and Technology , cilt.78, sa.1, ss.126-134, 2016 (SCI-Expanded)

24. Biomechanical comparison of straight and helical compression plates for fixation of transverse and oblique bone fractures: Modeling and experiments

SEZEK S., AKSAKAL B., Gurger M., Malkoc M., Say Y.

BIO-MEDICAL MATERIALS AND ENGINEERING , cilt.27, ss.197-209, 2016 (SCI-Expanded)

25. EFFECT OF THE TiBN COATING ON A HSS DRILL WHEN DRILLING THE MA8M Mg ALLOY

Karaca F., AKSAKAL B.

MATERIALI IN TEHNOLOGIJE , cilt.50, sa.1, ss.75-79, 2016 (SCI-Expanded)

26. Synthesis and fabrication of novel cuttlefish (Sepia officinalis) backbone biografts for biomedical applications

AKSAKAL B., Demirel M.

CERAMICS INTERNATIONAL , cilt.41, sa.3, ss.4531-4537, 2015 (SCI-Expanded)

27. Enhanced Bone Regeneration in Rabbit Tibial Defects Implanted with Newly Fabricated Bioceramic Bone Grafts

Demirel M., AKSAKAL B.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY , cilt.12, sa.2, ss.254-263, 2015 (SCI-Expanded)

28. Synthesis of novel Meerschaum (Sepiolite) derived bioceramics versus hydroxyapatite based bone grafts

Demirel M., AKSAKAL B.

Ceramics International , cilt.41, sa.8, ss.9251-9258, 2015 (SCI-Expanded)

29. Influence of cutting parameters and TiBN coating material on the drilling of A16061-T4 sheets

Aksakal B., Karaca F.

Materialpruefung/Materials Testing , cilt.57, ss.635-648, 2015 (SCI-Expanded)

30. Influence and comparison of various hydroxyapatite based bone grafts fabricated and used in bone fracture unions: An in vivo study

Kom M., AKSAKAL B., Demirel M., Malkoc M.

Journal of Biomaterials and Tissue Engineering , cilt.5, sa.5, ss.396-402, 2015 (SCI-Expanded)

31. Influence of hydroxyapatite coating thickness and powder particle size on corrosion performance of MA8M magnesium alloy

Sonmez S., AKSAKAL B., Dikici B.

Journal of Alloys and Compounds , cilt.596, ss.125-131, 2014 (SCI-Expanded)

32. Effects of bone drilling on local temperature and bone regeneration: An in vivo study

Karaca F., AKSAKAL B., Köm M.

Acta Orthopaedica et Traumatologica Turcica , cilt.48, sa.3, ss.326-332, 2014 (SCI-Expanded)

33. Influence of micro- and nano-hydroxyapatite coatings on the osteointegration of metallic (Ti6Al4 V) and bioabsorbable interference screws: An in vivo study

AKSAKAL B., Kom M., Tosun H., Demirel M.

European Journal of Orthopaedic Surgery and Traumatology , cilt.24, sa.5, ss.813-819, 2014 (SCI-Expanded)

34. Biomechanical comparison of straight DCP and helical plates for fixation of transverse and oblique bone fractures

AKSAKAL B., Gurger M., Say Y., Yilmaz E.

Acta of Bioengineering and Biomechanics , cilt.16, sa.4, ss.65-72, 2014 (SCI-Expanded)

35. Effects of various drilling parameters on bone during implantology: An in vitro experimental study

Karaca F., AKSAKAL B.

ACTA OF BIOENGINEERING AND BIOMECHANICS , cilt.15, sa.4, ss.25-32, 2013 (SCI-Expanded)

36. Structural and histopathologic changes of calf tibial bones subjected to various drilling processes Çeşitli delme i̇şlemlerine tabii tutulan sıǧır tibia kemiklerinin yapısal ve histopatolojik deǧişimleri

Karaca F., Kom M., Aksakal B.

Kafkas Universitesi Veteriner Fakultesi Dergisi , cilt.19, 2013 (SCI-Expanded)

37. An alternative method in fixation of tibial transverse fractures by intramedullar nailing: Biomechanical and histopathologic investigation

Varis O., AKSAKAL B., Say Y., Kom M., Yilmaz E.

ACTA OF BIOENGINEERING AND BIOMECHANICS , cilt.15, sa.2, ss.81-90, 2013 (SCI-Expanded)

38. Corrosion protection of AA6061-T4 alloy by sol-gel derived micro and nano-scale hydroxyapatite (HA) coating

Sonmez S., AKSAKAL B., Dikici B.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY , cilt.63, sa.3, ss.510-518, 2012 (SCI-Expanded)

39. Influence of drill parameters on bone temperature and necrosis: A FEM modelling and in vitro experiments

SEZEK S., AKSAKAL B., Karaca F.

COMPUTATIONAL MATERIALS SCIENCE , cilt.60, ss.13-18, 2012 (SCI-Expanded)

40. Electrophoretic deposition of selenium

AKSAKAL B., Boccaccini A.

MATERIALS LETTERS , cilt.76, ss.177-180, 2012 (SCI-Expanded)

41. Diffractaic acid, a novel proapoptotic agent, induces with olive oil both apoptosis and antioxidative systems in Ti-implanted rabbits

Odabasoglu F., YILDIRIM Ö. S., Aygun H., HALICI Z., Halici M., Erdogan F., et al.

European Journal of Pharmacology , cilt.674, ss.171-178, 2012 (SCI-Expanded)

42. The effects of square and circular die-orifices on the performance of combined extrusion-forging process

SEZEK S., Misirli C., Aksakal B., Can Y.

Journal of Materials Engineering and Performance , cilt.21, sa.4, ss.500-507, 2012 (SCI-Expanded)

43. Bone mineral density assessment by dual energy X-ray absorbtiometry as multiple or single assessment of rat bones causes discrepancy

AKSAKAL B., Koc Z., Say Y.

Archive of Osteop , cilt.87, 2012 (SCI-Expanded)

44. Influence of orthopaedic drilling parameters on temperature and histopathology of bovine tibia: An in vitro study

Karaca F., Aksakal B., Kom M.

Medical Engineering and Physics , cilt.33, sa.10, ss.1221-1227, 2011 (SCI-Expanded)

45. Biomechanical Analysis of Helical and Straight Compression Plate Fixation for Transverse and Oblique Bone Fractures

AKSAKAL B.

J of Biomechanics , cilt.4, ss.44-45, 2011 (SCI-Expanded)

46. The Effect of Coating Thickness on Corrosion Resistance of Hydroxyapatite Coated Ti6Al4V and 316L SS Implants

AKSAKAL B., GAVGALI M., Dikici B.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.19, sa.6, ss.894-899, 2010 (SCI-Expanded)

47. Effect of martensite volume fraction on mechanical properties of dual-phase treated AISI-4012 sheet steels

AKSAKAL B., Karaca F., Arikan R.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.101, sa.5, ss.684-691, 2010 (SCI-Expanded)

48. The effect of immersion times on the solubility and bonding stress of hydroxyapatite coated Ti6al4v pedicle screws

AKSAKAL B.

JOURNAL OF APPLIED BIOMATERIALS & BIOMECHANICS , cilt.8, sa.1, ss.33-41, 2010 (SCI-Expanded)

49. Effect of Die Radius on Blank Holder Force and Drawing Ratio: A Model and Experimental Investigation

SEZEK S., Savas V., Aksakal B.

MATERIALS AND MANUFACTURING PROCESSES , cilt.25, sa.7, ss.557-564, 2010 (SCI-Expanded)

50. Deformation and temperature behaviour during cold, warm and hot flat rolling of AA5454-O alloy

SEZEK S., Aksakal B.

MATERIALS & DESIGN , cilt.30, sa.9, ss.3450-3459, 2009 (SCI-Expanded)

51. Bioceramic dip-coating on Ti-6Al-4V and 316L SS implant materials

Aksakal B., Hanyaloglu C.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , cilt.19, sa.5, ss.2097-2104, 2008 (SCI-Expanded)

52. Determination of experimental axial and sideways metal flow in open die forging

AKSAKAL B., Osman F. H., Bramley A. N.

MATERIALS & DESIGN , cilt.29, sa.3, ss.576-583, 2008 (SCI-Expanded)

53. Analysis of cold and hot plate rolling using dual stream functions

SEZEK S., Aksakal B., Can Y.

MATERIALS & DESIGN , cilt.29, sa.3, ss.584-596, 2008 (SCI-Expanded)

54. Hydroxyapatite Dip Coated and Uncoated Titanium Poly-Axial Pedicle Screws: An In Vivo Bovine Model

AKSAKAL B.

SPINE , cilt.31, sa.8, ss.215-220, 2006 (SCI-Expanded)

55. An investigation of the effects of hydroxyapatite coatings on the fixation strength of cortical screws

Yildirim O., Aksakal B., Celik H., Vangolu Y., Okur A.

MEDICAL ENGINEERING & PHYSICS , cilt.27, sa.3, ss.221-228, 2005 (SCI-Expanded)

56. Forging of polygonal discs using the dual stream functions

Aksakal B., SEZEK S., Can Y.

Materials and Design , cilt.26, sa.8, ss.643-654, 2005 (SCI-Expanded)

57. Stress analysis of interference fitted shaft-hub system under transient heat transfer conditions

Şen S., Aksakal B.

MATERIALS & DESIGN , cilt.25, sa.5, ss.407-417, 2004 (SCI-Expanded)

58. Metallurgical Failure Analysis of Various Implant Materials Used in Orthopedic Applications

AKSAKAL B., Yildirim O., Gul H.

ASM, J of Failure Anal. and Prevention , cilt.4, sa.3, ss.17-23, 2004 (SCI-Expanded)

59. An indentation and stress analysis of WC/Fe-Mn hardmetals

Hanyaloglu S., Aksakal B., Sen S.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.10, sa.3, ss.229-235, 2003 (SCI-Expanded)

60. Coating analysis of implant materials used in orthopedic surgery

AKSAKAL B.

J of Int. Med.Res , cilt.31, sa.5, ss.419-422, 2003 (SCI-Expanded)

61. Coating analysis of implant materials used in orthopaedic surgery

Aksakal B., YILDIRIM Ö. S., Okur A.

Journal of International Medical Research , cilt.31, sa.5, ss.418-421, 2003 (SCI-Expanded)

62. Analysis of a flexible forging cell

AKSAKAL B.

Ind J Eng&Mater , cilt.10, ss.113-122, 2003 (SCI-Expanded)

63. Production and indentation analysis of WC/Fe-Mn as an alternative to cobalt-bonded hardmetals

Hanyaloglu C., Aksakal B., Bolton J.

Materials Characterization , cilt.47, ss.315-322, 2001 (SCI-Expanded)

64. Reactive sintering of electroless nickel-plated aluminum powders

Hanyaloglu S., Aksakal B., McColm I.

Materials Characterization , cilt.47, sa.1, ss.9-16, 2001 (SCI-Expanded)

65. Transient and residual thermal stresses in quenched cylindrical bodies

Sen S., Aksakal B., Ozel A.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.42, sa.10, ss.2013-2029, 2000 (SCI-Expanded)

66. Effects of various homogenisation treatments on the hot workability of ingot aluminium alloy AA2014

GAVGALI M., Aksakal B.

Materials Science and Engineering A , cilt.254, ss.189-199, 1998 (SCI-Expanded)

67. Upper-bound analysis for the automation of open-die forging

Aksakal B., Osman F., Bramley A.

Journal of Materials Processing Technology , cilt.71, sa.2, ss.215-223, 1997 (SCI-Expanded)

68. Analysis for the automation of small batch manufacturing using open die forging

AKSAKAL B.

CIRP Annals-Manuf Technol , ss.273-278, 1993 (SCI-Expanded)

69. The examination of the relationship of the mechanical properties and microstructure in dual phase steel

AKSAKAL B., Arikan R.

J. Fac. Eng. Arch. Gazi Univ , cilt.3, ss.27-50, 1988 (SCI-Expanded)

70. A Finite Element Analysis of the Indentation of an elastic-Work Hardening Layered Half-Space by an Elastic Sphere

AKSAKAL B.

Int.J. Mech.Sci , cilt.40, ss.1281-1293, 1 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 4

1. The effect of usnic acid supplementation on rabbit’s tissuessurrounding implant apoptosis and some enzyme activities

AKSAKAL B., YILDIRIM Ö. S., ERDOĞAN F.

Global Drugs and Therapeutics , cilt.4, sa.4, ss.1-7, 2019 (Hakemli Dergi)

2. Tensile bond strength of composite luting cements to metal alloys after various surface treatments

AKSAKAL B.

Int J Dental Res , cilt.20, sa.2, ss.174-179, 2009 (Hakemli Dergi)

3. Analytical solutions for determining axial metal flow during open die forging experiments

AKSAKAL B.

Tr.J of Eng.&Env , cilt.19, sa.5, ss.365-372, 1995 (Hakemli Dergi)

4. An Upper Bound Approach for Predicting Load and Metal Flow in Open Die Forging

AKSAKAL B.

Tr.J of Eng.&Env. Sci , cilt.19, sa.5, ss.357-364, 1995 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 31

1. Osteointegration of Micron-Nano Hydroxyapatite Coated Metallic (Ti6Al4V) and Bioabsorbable Interference Screws: in vivo analysis

AKSAKAL B.

7th Int. Conf. on Nanoscience &Nanotechnologies-NN10, Thessoloniki, July-2010, Greece, Selanik, Yunanistan, 10 Temmuz 2010, ss.23-27, (Tam Metin Bildiri)

2. SYNTESIZING HIGH QUALITY GRAPHENE BY ORGANIC SALT ASSISTED LIQUID PHASE EXFOLIATION

AKSAKAL B., Aslan N.

INTERNATIONAL BLACK SEA COASTLINE COUNTRIES SYMPOSIUM, Batumi, Gürcistan, 02 Mayıs 2019, ss.1-8, (Tam Metin Bildiri)

3. BİYOMEDİKAL UYGULAMALAR İÇİN ALTERNATİF BİYOGREFT SENTEZİ VE İN VİVO UYGULAMA SONUÇLARI

AKSAKAL B., Demirel M.

INTERNATIONAL BLACK SEA COASTLINE COUNTRIES SYMPOSIUM, Batumi, Gürcistan, 02 Mayıs 2019, ss.1-8, (Tam Metin Bildiri)

4. EFFECT OF NANO GRAPHENE ON THE MECHANOSTRUCTURE PROPERTIES OF HYDROXYAPATITE BASED BIOCOMPOSITE COATINGS

AKSAKAL B., Aslan N.

INTERNATIONAL BLACK SEA COASTLINE COUNTRIES SYMPOSIUM, Batumi, Gürcistan, 02 Mayıs 2019, ss.1-8, (Tam Metin Bildiri)

5. Modelling of Dental drills and Restoration processes by Finite Element method

AKSAKAL B., Sezek S.

CMES-18, Girne, Kıbrıs (Kktc), 07 Eylül 2018, ss.1, (Özet Bildiri)

6. Investigation of Temperature Distribution in Cold Rolling Process

AKSAKAL B., Sezek S.

CMES-18, Girne, Kıbrıs (Kktc), 07 Eylül 2018, ss.1, (Özet Bildiri)

7. Studying Temperature Distribution during Cold and Hot Rolling of AA5454-O Alloy

AKSAKAL B.

26th Int. Baltic Conf on Mater Eng, Kaunas, Litvanya, 26 Ekim 2017, ss.45-51, (Tam Metin Bildiri)

8. Effects of Hydroxyapatite-Based Bioceramic Coatings on the Cell Viability of Stainless Steel Alloys

AKSAKAL B.

8th IATS 2017, Elazığ, Türkiye, 26 Ekim 2017, ss.38, (Tam Metin Bildiri)

9. Cytotoxicity of Hydroxyapatite Based Coatings on Nitinol Materials

AKSAKAL B.

8th IATS 2017, Elazığ, Türkiye, 26 Ekim 2017, ss.39, (Özet Bildiri)

10. Zinc Doped Amorphous Carbon(Zn-a:C) Based Photodiode by Electrodeposition Technique

AKSAKAL B.

MSNG 2017, Sarayevo, Bosna-Hersek, 28 Haziran 2017, ss.10, (Tam Metin Bildiri)

11. Studying temperature variations that occurred during cold and hot rolling of AA5454-O alloy

SEZEK S., AKSAKAL B.

26th International Baltic Conference on Materials Engineering, 2017, Kaunas, Litvanya, 26 - 27 Ekim 2017, ss.45-51, (Tam Metin Bildiri)

12. Seltuğ D Bakırdere S Turgay N Ö Büyükpınar Ç Akdeniz İ Aksakal B Türk Makam Müziğinde Taş Plakların Rolü Plakların Fiziksel Kimyasal Analizleri ve Sonuçların Ses Kalitesiyle İlişkisi 29 31 Mayıs 2015 Elazığ

SELTUĞ D., BAKIRDERE S., TURGAY N. Ö., BÜYÜKPINAR Ç., AKDENİZ İ., AKSAKAL B.

XIV. Ulusal Spektroskopi Kongresi, Elazığ, Türkiye, 29 - 31 Mayıs 2015

28. Stress Analysis of the Indentation by an Elastic Sphere of an Elastic-Plastic Axisymmetric Substrate Layered Elastic Film

AKSAKAL B.

3rd Int Conf on Model and Sim, 01 Ocak 1997, (Tam Metin Bildiri)

Metrikler

Yayın

105

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

822

H-İndeks (WoS)

Atıf (Scopus)

1018

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim