Doç. Dr. Beril EKER

Yayın Ağı

Makaleler 31

1. Identifying the optimal flexural performance of metal-composite single-lap joints with copolyester-reinforced epoxy adhesive under various loading rates using the Grey Relation Analysis

ERBAYRAK E., ERBAYRAK S., EKER B., ÇOLAK M.

International Journal of Adhesion and Adhesives , cilt.149, 2026 (SCI-Expanded, Scopus)

2. Comparative investigation of composite-metal lap joints with mono-adhesive and thermoplastic-reinforced mixed adhesive at elevated temperatures

ERBAYRAK E., EKER B., ÇOLAK M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , 2026 (SCI-Expanded, Scopus)

3. Effects of Graphene and Zinc Borate on Physical, Thermal, and Structural Properties of Recycled Polypropylene: An Experimental Study

EKER B., BAKBAK O., BİRKAN B. E., TAŞDEMİR M.

POLYMER ENGINEERING AND SCIENCE , 2026 (SCI-Expanded, Scopus)

4. Dynamic mechanical, morphological, and thermal characteristics of polypropylene/red mud polymer composites

Eker B., Yağci Ö., Ulutaş E., Taşdemir M.

Sigma Journal of Engineering and Natural Sciences , cilt.44, sa.2, ss.1127-1137, 2026 (Scopus)

5. Enhancing the mechanical and thermal properties of ABS polymers through steel scale reinforcement: a sustainable approach to waste utilization

ULUTAŞ E., TAŞDEMİR M., EKER B.

Iranian Polymer Journal (English Edition) , cilt.35, sa.3, ss.601-610, 2026 (SCI-Expanded, Scopus)

6. Graphene and zinc borate reinforced nanocomposites of recycled polypropylene: mechanical, tribological and dynamic mechanical properties

Eker B., Bakbak O., Birkan B. E., Taşdemir M.

Iranian Polymer Journal (English Edition) , 2026 (SCI-Expanded, Scopus)

7. Characterization, generative design, and fabrication of a carbon fiber-reinforced industrial robot gripper via additive manufacturing

HARTOMACIOĞLU S., Kaya E., EKER B., Dagli S., Sarikaya M.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.33, ss.3714-3727, 2024 (SCI-Expanded, Scopus)

8. Surface characterization and optical properties of zirconia-reinforced lithium silicate ceramics against different mouthwashes and thermocycling

Benli Özkan M., Yargıcı Çağlayan M., Eker B.

Journal of Medical and Dental Investigations , cilt.5, ss.1-13, 2024 (Hakemli Dergi)

9. Akrilonitril Bütadien Stiren (ABS) Kopolimerinin Fiziksel Özelliklerine Çelik Tufalinin Etkisi

Ulutaş E., Taşdemir M., Gümüş B.

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.13, sa.2, ss.1287-1296, 2023 (TRDizin)

10. Experimental study of adhesively bonded joints with dissimilar composite laminates under different loading rates and ambient temperatures

Erbayrak E., Gumus B. E., Yuncuoglu E. U.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.45, sa.5, 2023 (SCI-Expanded, Scopus)

11. Thermal, structural and morphological properties of polypropylene and high density polyethylene polymer composites filled with waste urea formaldehyde

YAĞCİ Ö., EKER B., TAŞDEMİR M.

POLYMER BULLETIN , cilt.80, sa.4, ss.4005-4022, 2023 (SCI-Expanded, Scopus)

12. Effect of MA-g-PP addition on mechanical properties of polypropylene/hollow glass spheres/nanoclay composites

Eker Gümüş B.

Polymer Bulletin , cilt.80, sa.3, ss.3405-3422, 2023 (SCI-Expanded, Scopus)

13. Yüksek Yoğunluklu Polietin (YYPE)/Çinko Borat Polimer Kompozitinin Mekanik Özelliklerine Grafenin Etkisi

ULUTAŞ E., GÜMÜŞ B., TAŞDEMİR M.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.11, sa.1, ss.133-141, 2023 (TRDizin)

14. Morphological, rheological, and mechanical properties of PLA/TPU/nanoclay blends compatibilized with epoxy-based Joncryl chain extender

Kahraman Y., Özdemir B., EKER B., Nofar M.

COLLOID AND POLYMER SCIENCE , cilt.301, sa.1, ss.51-62, 2023 (SCI-Expanded, Scopus)

15. High-density polyethylene/artichoke leaf powder polymer composites: dynamic mechanical, morphological and thermal properties

EKER B., YAĞCİ Ö., TAŞDEMİR M.

IRANIAN POLYMER JOURNAL , cilt.31, sa.7, ss.787-797, 2022 (SCI-Expanded, Scopus)

16. Composition design of PLA/TPU emulsion blends compatibilized with multifunctional epoxy-based chain extender to tackle high impact resistant ductile structures

Kahraman Y., Alkan Göksu Y., Özdemir B., GÜMÜŞ B., Nofar M.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.139, sa.12, 2022 (SCI-Expanded, Scopus)

17. Effects of Various Laser Treatments on Surface Characterization and Repair Bond Strength of Zirconia-Reinforced Lithium Silicate Ceramics

Benli M., Kilic E., Gümüş B., Turkyilmaz I.

JOURNAL OF PROSTHODONTICS , cilt.35, sa.2, ss.137-244, 2022 (SCI-Expanded, Scopus)

18. Impact of print bed build location on the dimensional accuracy and surface quality of parts printed by multi jet fusion

SAĞBAŞ B., Gumus B. E., Kahraman Y., Dowling D. P.

JOURNAL OF MANUFACTURING PROCESSES , cilt.70, ss.290-299, 2021 (SCI-Expanded, Scopus)

19. An Experimental and Numerical Determination on Low-Velocity Impact Response of Hybrid Composite Laminate

ERBAYRAK E., YÜNCÜOĞLU E. U., KAHRAMAN Y., GÜMÜŞ B.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING , cilt.45, sa.3, ss.665-681, 2021 (SCI-Expanded, Scopus)

20. Thermal, structural and dynamical mechanical properties of hollow glass sphere-reinforced polypropylene composites

YAĞCi Ö., Eker Gumus B., TAŞDEMİR M.

POLYMER BULLETIN , cilt.78, sa.6, ss.3089-3101, 2021 (SCI-Expanded, Scopus)

21. Effect of Montmorillonite Clay on Physical Properties of HDPE/ HGSComposites

GÜMÜŞ B.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.21, sa.3, ss.735-744, 2021 (TRDizin)

22. Can polylactic acid be a CAD/CAM material for provisional crown restorations in terms of fit and fracture strength?

Benlİ M., Eker-GÜmÜŞ B., Kahraman Y., Huck O., Özcan M.

Dental materials journal , cilt.40, ss.772-780, 2021 (SCI-Expanded, Scopus)

23. Thermal, structural and morphological characterization of dental polymers for clinical applications

Benli M., EKER B., Kahraman Y., YAĞCİ Ö., Erdogan D., Huck O., et al.

JOURNAL OF PROSTHODONTIC RESEARCH , cilt.65, sa.2, ss.176-185, 2021 (SCI-Expanded, Scopus)

24. Investigations of Strain Rate Effects on the Mechanical Properties of Hybrid Composite Laminate Under Varying Temperatures

ERBAYRAK E., EKER B., Yuncuoglu E. U., Kahraman Y.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.45, sa.11, ss.9709-9724, 2020 (SCI-Expanded, Scopus)

25. Surface characterization and bonding properties of milled polyetheretherketone dental posts

Benli M., Eker Gümüş B., Kahraman Y., Huck O., Özcan M.

Odontology , cilt.108, sa.4, ss.596-606, 2020 (SCI-Expanded, Scopus)

26. Surface roughness and wear behavior of occlusal splint materials made of contemporary and high-performance polymers

Benli M., Gumus B., KAHRAMAN Y., Gokcen-Rohlig B., Evlioglu G., Huck O., et al.

ODONTOLOGY , cilt.108, sa.2, ss.240-250, 2020 (SCI-Expanded, Scopus)

27. Dynamical Mechanical Properties of Polypropylene Composites Filled with Olive Pit Particles

EKER B., YAĞCİ Ö., Erdogan D. C., TAŞDEMİR M.

JOURNAL OF TESTING AND EVALUATION , cilt.47, sa.4, ss.2551-2561, 2019 (SCI-Expanded, Scopus)

28. A RELIABILITY APPROACH FROM MECHANICAL ENGINEERING POINT OF VIEW

EKER B.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.36, sa.3, ss.629-644, 2018 (ESCI)

29. Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength

Altan M., Eryıldız M., Gumus B., Kahraman Y.

MATERIALS TESTING , cilt.60, ss.471-477, 2018 (SCI-Expanded, Scopus)

30. Characterization of hollow glass sphere reinforced epoxy composites: Dynamical mechanical analysis and morphology

Altan M., Gümüş B., KAHRAMAN Y.

Materialpruefung/Materials Testing , cilt.59, sa.3, ss.239-243, 2017 (SCI-Expanded, Scopus)

31. Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions

EKER B., EKİCİ B., KURT M., BAKIR B.

MECHANIKA , cilt.20, sa.3, ss.310-316, 2014 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 6

1. OPTIMIZATION OF PROCESS PARAMETERS FOR TENSILE STRENGTH OF 3D PRINTED CARBON FIBER BASED POLYAMIDE SAMPLES

Kaya E., Hartomacıoğlu S., Gümüş B.

IV. International Science and Innovation Congress, İstanbul, Türkiye, 27 - 30 Temmuz 2023, ss.9, (Özet Bildiri)

2. THERMAL, MORPHOLOGICAL AND DYNAMICAL MECHANICAL PROPERTIES OF HDPE/HGS/MMT NANOCOMPOSITES

EKER GÜMÜŞ B.

FOURTH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING: ICAME 2018 SUPPORTED BY JOURNAL OF THERMAL ENGINEERING INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY ICAME 2018 DECEMBER 19-, İstanbul, Türkiye, 19 Aralık 2018, ss.800-806, (Tam Metin Bildiri)

3. Improvement in Adhesion of Sandwich Structures With Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method

Sönmez M. E., Eker Gümüş B., Eryıldız M., Altan M.

4th International Conference on Advances In Mechanical Engineering, ICAME 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1038-1045, (Tam Metin Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

397

H-İndeks (WoS)

Atıf (Scopus)

430

H-İndeks (Scopus)

Atıf (Scholar)

576

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Toplam Atıf Sayısı

432

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler