Yayınlar & Eserler

Yayın Ağı
Makaleler 26
Tümü (26)
SCI-E, SSCI, AHCI (21)
SCI-E, SSCI, AHCI, ESCI (21)
Scopus (21)
TRDizin (3)
Diğer Yayınlar (2)

1. Enhancing the mechanical and thermal properties of ABS polymers through steel scale reinforcement: a sustainable approach to waste utilization

ULUTAŞ E., TAŞDEMİR M., EKER B.
Iranian Polymer Journal (English Edition) , 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

2. Characterization, generative design, and fabrication of a carbon fiber-reinforced industrial robot gripper via additive manufacturing

Hartomacıoğlu S., Kaya E., Eker B., Dağlı S., Sarıkaya M.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY , cilt.33, ss.3714-3727, 2024 (SCI-Expanded, Scopus) Creative Commons License

3. Surface characterization and optical properties of zirconia-reinforced lithium silicate ceramics against different mouthwashes and thermocycling

Benli Özkan M., Yargıcı Çağlayan M., Eker B.
Journal of Medical and Dental Investigations , cilt.5, ss.1-13, 2024 (Hakemli Dergi) Creative Commons License

4. Akrilonitril Bütadien Stiren (ABS) Kopolimerinin Fiziksel Özelliklerine Çelik Tufalinin Etkisi

Ulutaş E., Taşdemir M., Gümüş B.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.13, sa.2, ss.1287-1296, 2023 (TRDizin) Creative Commons License Sürdürülebilir Kalkınma

5. Experimental study of adhesively bonded joints with dissimilar composite laminates under different loading rates and ambient temperatures

Erbayrak E., Gumus B. E., Yuncuoglu E. U.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.45, sa.5, 2023 (SCI-Expanded, Scopus) identifier identifier

6. Yüksek Yoğunluklu Polietin (YYPE)/Çinko Borat Polimer Kompozitinin Mekanik Özelliklerine Grafenin Etkisi

ULUTAŞ E., GÜMÜŞ B., TAŞDEMİR M.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.11, sa.1, ss.133-141, 2023 (TRDizin) identifier

7. Effect of MA-g-PP addition on mechanical properties of polypropylene/hollow glass spheres/nanoclay composites

Eker Gümüş B.
Polymer Bulletin , cilt.80, sa.3, ss.3405-3422, 2023 (SCI-Expanded, Scopus) identifier identifier

8. Morphological, rheological, and mechanical properties of PLA/TPU/nanoclay blends compatibilized with epoxy‐based Joncryl chain extender

Kahraman Y., Özdemir B., Gümüş B., Nofar M.
COLLOID AND POLYMER SCIENCE , cilt.1, sa.2, ss.1-12, 2022 (SCI-Expanded, Scopus) Creative Commons License

9. Thermal, structural and morphological properties of polypropylene and high density polyethylene polymer composites filled with waste urea formaldehyde

Yağci Ö., Gümüş B., Taşdemir M.
POLYMER BULLETIN , 2022 (SCI-Expanded, Scopus)

10. Composition design of PLA/TPU emulsion blends compatibilized with multifunctional epoxy-based chain extender to tackle high impact resistant ductile structures

Kahraman Y., Alkan Göksu Y., Özdemir B., GÜMÜŞ B., Nofar M.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.139, sa.12, 2022 (SCI-Expanded, Scopus) identifier identifier

11. Effects of Various Laser Treatments on Surface Characterization and Repair Bond Strength of Zirconia-Reinforced Lithium Silicate Ceramics

Benli M., Kilic E., Gümüş B., Turkyilmaz I.
JOURNAL OF PROSTHODONTICS , cilt.35, sa.2, ss.137-244, 2022 (SCI-Expanded, Scopus) identifier identifier identifier

12. High-density polyethylene/artichoke leaf powder polymer composites: dynamic mechanical, morphological and thermal properties

Gümüş B., Yağci Ö., Taşdemir M.
Iranian Polymer Journal , 2022 (SCI-Expanded, Scopus)

13. Impact of print bed build location on the dimensional accuracy and surface quality of parts printed by multi jet fusion

SAĞBAŞ B., Gumus B. E., Kahraman Y., Dowling D. P.
JOURNAL OF MANUFACTURING PROCESSES , cilt.70, ss.290-299, 2021 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

14. An Experimental and Numerical Determination on Low-Velocity Impact Response of Hybrid Composite Laminate

ERBAYRAK E., YÜNCÜOĞLU E. U., KAHRAMAN Y., GÜMÜŞ B.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING , cilt.45, sa.3, ss.665-681, 2021 (SCI-Expanded, Scopus) identifier identifier

15. Thermal, structural and dynamical mechanical properties of hollow glass sphere-reinforced polypropylene composites

YAĞCi Ö., Eker Gumus B., TAŞDEMİR M.
POLYMER BULLETIN , cilt.78, sa.6, ss.3089-3101, 2021 (SCI-Expanded, Scopus) identifier identifier

16. Effect of Montmorillonite Clay on Physical Properties of HDPE/ HGSComposites

GÜMÜŞ B.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.21, sa.3, ss.735-744, 2021 (TRDizin) identifier

17. Can polylactic acid be a CAD/CAM material for provisional crown restorations in terms of fit and fracture strength?

Benlİ M., Eker-GÜmÜŞ B., Kahraman Y., Huck O., Özcan M.
Dental materials journal , cilt.40, ss.772-780, 2021 (SCI-Expanded, Scopus) Creative Commons License identifier identifier identifier

18. Surface characterization and bonding properties of milled polyetheretherketone dental posts

Benli M., Eker Gümüş B., Kahraman Y., Huck O., Özcan M.
Odontology , cilt.108, sa.4, ss.596-606, 2020 (SCI-Expanded, Scopus) Creative Commons License identifier identifier identifier

19. THERMAL, STRUCTURAL AND MORPHOLOGICAL CHARACTERIZATION OF DENTAL POLYMERS FOR CLINICAL APPLICATIONS

Benli M., Gümüş B., Kahraman Y., Yağci Ö., Ceylan Erdoğan D.
JOURNAL OF PROSTHODONTIC RESEARCH , cilt.65, sa.2021, ss.1-9, 2020 (SCI-Expanded, Scopus) Creative Commons License

20. Investigations of Strain Rate Effects on the Mechanical Properties of Hybrid Composite Laminate Under Varying Temperatures

Erbayrak E., Gümüş B., Kahraman Y., Yüncüoğlu E. U.
Arabian Journal For Science And Engineering , ss.1-12, 2020 (SCI-Expanded, Scopus) Creative Commons License

21. Surface roughness and wear behavior of occlusal splint materials made of contemporary and high-performance polymers

Benli M., Gumus B., KAHRAMAN Y., Gokcen-Rohlig B., Evlioglu G., Huck O., et al.
ODONTOLOGY , cilt.108, sa.2, ss.240-250, 2020 (SCI-Expanded, Scopus) Creative Commons License identifier identifier identifier

22. Dynamical Mechanical Properties of Polypropylene Composites Filled with Olive Pit Particles

EKER GÜMÜŞ B., YAĞCi Ö., CEYLAN ERDOĞAN D., Taşdemir M.
JOURNAL OF TESTING AND EVALUATION , ss.1-12, 2019 (SCI-Expanded, Scopus)

23. A RELIABILITY APPROACH FROM MECHANICAL ENGINEERING POINT OF VIEW

EKER GÜMÜŞ B.
Sigma Mühendislik ve Fen Bilimleri Dergisi , sa.36, ss.629-644, 2018 (Hakemli Dergi)

24. Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength

Altan M., Eryıldız M., Gumus B., Kahraman Y.
MATERIALS TESTING , cilt.60, ss.471-477, 2018 (SCI-Expanded, Scopus) identifier identifier

25. Characterization of hollow glass sphere reinforced epoxy composites: Dynamical mechanical analysis and morphology

Altan M., Gümüş B., KAHRAMAN Y.
Materialpruefung/Materials Testing , cilt.59, sa.3, ss.239-243, 2017 (SCI-Expanded, Scopus) identifier identifier

26. Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions

Eker Gümüş B., Ekici B., Kurt M., Bakır B.
MECHANIKA , cilt.20, ss.310-316, 2014 (SCI-Expanded, Scopus) Creative Commons License identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 6

1. OPTIMIZATION OF PROCESS PARAMETERS FOR TENSILE STRENGTH OF 3D PRINTED CARBON FIBER BASED POLYAMIDE SAMPLES

Kaya E., Hartomacıoğlu S., Gümüş B.
IV. International Science and Innovation Congress, İstanbul, Türkiye, 27 - 30 Temmuz 2023, ss.9, (Özet Bildiri) Creative Commons License

2. THERMAL, MORPHOLOGICAL AND DYNAMICAL MECHANICAL PROPERTIES OF HDPE/HGS/MMT NANOCOMPOSITES

EKER GÜMÜŞ B.
FOURTH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING: ICAME 2018 SUPPORTED BY JOURNAL OF THERMAL ENGINEERING INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY ICAME 2018 DECEMBER 19-, İstanbul, Türkiye, 19 Aralık 2018, ss.800-806, (Tam Metin Bildiri)

3. Improvement in Adhesion of Sandwich Structures With Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method

Sönmez M. E., Eker Gümüş B., Eryıldız M., Altan M.
4th International Conference on Advances In Mechanical Engineering, ICAME 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1038-1045, (Tam Metin Bildiri)

4. CAM KÜRE VE NANOKİL KATKILI YÜKSEK YOĞUNLUKLU POLİETİLEN POLİMER KOMPOZİTLERİNİN MEKANİK ÖZELLİKLERİ

EKER GÜMÜŞ B.
13. Ulusal Kimya Mühendisliği Kongresi, Van, Türkiye, 03 Eylül 2018, ss.20-28, (Tam Metin Bildiri)

5. A New Sheet Die Design Methodology to Eliminate Scrap Shedding Problems During Mass Production

EKER GÜMÜŞ B., Ekici B.
ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, İstanbul, Türkiye, 12 Temmuz 2010, sa.3, ss.243-249, (Tam Metin Bildiri)

6. Transit Connect Yük Sabitleme Kancasının Dayanım Analizi(Ford Otosan)

EKER GÜMÜŞ B.
Türkiye Abaqus Kullanıcılar Toplantısı SIMULIA, İstanbul, Türkiye, 05 Kasım 2008, cilt.8, sa.1, ss.5-10, (Tam Metin Bildiri)
Metrikler

Yayın

32

Yayın (WoS)

21

Yayın (Scopus)

21

Atıf (WoS)

277

H-İndeks (WoS)

8

Atıf (Scopus)

299

H-İndeks (Scopus)

8

Atıf (Scholar)

571

H-İndeks (Scholar)

13

Atıf (TrDizin)

1

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

1

Toplam Atıf Sayısı

301

Proje

2

Açık Erişim

9
BM Sürdürülebilir Kalkınma Amaçları