Yayınlar & Eserler

Yayın Ağı
Makaleler 18
Tümü (18)
SCI-E, SSCI, AHCI (12)
SCI-E, SSCI, AHCI, ESCI (14)
ESCI (2)
Scopus (13)
TRDizin (3)
Diğer Yayınlar (3)

1. A Comprehensive Study of the Relationships between Hardenability and Heat Transfer in a Jominy Test Sample

Çakır M.
El-Cezeri Journal of Science and Engineering , cilt.12, sa.2, ss.213-217, 2025 (Scopus) Sürdürülebilir Kalkınma

2. Effect of Stratified Charge Combustion Chamber Design on Natural Gas Engine Performance

Cakir M.
ENERGIES , cilt.18, sa.9, ss.1-14, 2025 (SCI-Expanded, Scopus) identifier

3. Influences of a novel pre-chamber design on the performance and emission characteristics of a spark ignition engine fuelled with natural gas

Çakır M., Gonca G.
International Journal of Global Warming , cilt.31, sa.1, ss.68-81, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

4. Design and development of the PLC based sensor and instrumentation system for self-propelled pruning residue mulcher prototype

Ünal İ., Çanakcı M., Topakcı M., Karayel D., Çakır M.
COMPUTERS AND ELECTRONICS IN AGRICULTURE , cilt.186, 2021 (SCI-Expanded, Scopus) identifier identifier

5. Experimental dynamic analysis of the piston assembly of a running single-cylinder diesel engine

Çakır M.
Journal of Marine Engineering and Technology , cilt.20, sa.4, ss.235-242, 2021 (SCI-Expanded, Scopus) identifier identifier

6. Performance assessment of a modified power generating cycle based on effective ecological power density and performance coefficient

GONCA G., ŞAHİN B., ÇAKIR M.
INTERNATIONAL JOURNAL OF EXERGY , cilt.33, sa.2, ss.153-164, 2020 (SCI-Expanded, Scopus) identifier identifier

7. Kendi Yürür Bir Budama Artığı Parçalama Makinasıİşletme Giderlerinin Belirlenmesi

Canakci M., Topakci M., Karayel D., Unal I., Çakır M., Yigit M., et al.
Journal of Agricultural Machinery Science , cilt.14, sa.2, ss.127-134, 2018 (Hakemli Dergi)

8. Performance Characteristics and Emission Formations of a Spark Ignition (SI) Engine Fueled with Different Gaseous Fuels

Gonca G., Çakır M., Şahin B.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.43, ss.4487-4499, 2018 (SCI-Expanded, Scopus) identifier identifier

9. Cost Efficiency and Emission Analysis of a Bulk Carrier Cranes Operation

Bashan V., ÇAKIR M., SÖNMEZ H. İ.
JOURNAL OF ETA MARITIME SCIENCE , cilt.6, sa.1, ss.27-36, 2018 (ESCI, TRDizin) Creative Commons License identifier

10. Experimental Performance Analysis of a Partially Loaded Natural Gas Fuelled Research Engine

Çakır M.
JOURNAL OF ETA MARITIME SCIENCE , cilt.6, sa.2, ss.85-91, 2018 (ESCI, TRDizin) Creative Commons License identifier

11. Ecological coefficient of performance analysis and optimisation of gas turbines by using exergy analysis approach

Üst Y., Şahin B., Çakır M.
INTERNATIONAL JOURNAL OF EXERGY , cilt.21, ss.39-69, 2016 (SCI-Expanded, Scopus) identifier identifier

12. THE NUMERICAL THERMODYNAMIC ANALYSIS OF OTTO-MILLER CYCLE

ÇAKIR M.
THERMAL SCIENCE , cilt.20, sa.1, ss.363-369, 2016 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

13. Effects of Borided Cylinder Liner on Engine Performance in a Firing Diesel Engine

Çakir M., Akcay I. H.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.40, ss.3329-3335, 2015 (SCI-Expanded, Scopus) identifier identifier

14. Thermodynamic performance analysis and optimization of DMC (Dual Miller Cycle) cogeneration system by considering exergetic performance coefficient and total exergy output criteria

ÜST Y., ARSLAN F., ÖZSARI İ., ÇAKIR M.
ENERGY , cilt.90, ss.552-559, 2015 (SCI-Expanded, Scopus) identifier identifier

15. Frictional Behavior between Piston Ring and Cylinder Liner in Engine Condition with Application of Reciprocating Test

Çakır M., Akcay İ. H.
International Journal of Materials Engineering and Technology , cilt.11, sa.1, ss.57-71, 2014 (Hakemli Dergi)

16. INVESTIGATION THEORETICALLY AND EMPIRICALLY OF CORRELATION BETWEEN HARDENABILITY AND HEAT TRANSFER FOR JOMINY SAMPLE

Çakir M., Ozsoy A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, ss.251-256, 2013 (SCI-Expanded, Scopus, TRDizin) identifier identifier

17. İçten Yanmalı Motorlarda Segman-Gömlek Sürtünmesinin Motor Performansı ile İlişkisi Üzerine Bir İnceleme

Çakır M., Akcay İ. H.
C.B.U. Soma Meslek Yüksek Okulu Teknik Bilimler Meslek Yüksek Okulu Dergisi , cilt.2, sa.16, ss.33-44, 2011 (Hakemli Dergi)

18. Investigation of the correlation between thermal properties and hardenability of Jominy bars quenched with air-water mixture for AISI 1050 steel

Cakir M., Ozsoy A.
MATERIALS & DESIGN , cilt.32, ss.3099-3105, 2011 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 10

1. Doğal Emişli Bir Dizel Motorda Emme Havasına Hidrojen İlavesinin Performans Üzerine Etkilerinin Sayısal Analizi

Koç F. D., Çakır M.
16. Uluslararası Mühendislik, Mimarlık ve Tasarım Kongresi, İstanbul, Türkiye, 20 - 22 Aralık 2025, ss.1476, (Özet Bildiri)

2. Tek Silindirli Bir Dizel Araştırma Motorunun Emme Havasına Amonyak İlavesinin Performans Üzerine Etkilerinin Sayısal Analizi

Yılmaz F. H., Çakır M.
16. Uluslararası Mühendislik, Mimarlık ve Tasarım Kongresi, İstanbul, Türkiye, 20 - 22 Aralık 2025, ss.1479, (Özet Bildiri)

3. Investigation of Laminer Flame Speeds for Hydrogen/Ammonia Mixture by Using the Spherical Combustion Bomb Method

Çakır M., Çiftçi A.
17th International Combustion Symposium, Bursa, Türkiye, 19 - 21 Eylül 2024, sa.50, ss.221-225, (Tam Metin Bildiri)

4. Catalytic ammonia decomposition over nickel and ruthenium supported on Al2O3 pellets for hydrogen production

Şan A. T., Çakır M., Figen H. E.
8th International Hydrogen Technologies Congress, 12 - 15 Mayıs 2024, ss.237-239, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

5. DESIGN OF COMPRESSED NATURAL GAS-AIR MIXER FOR A SINGLE CYLINDER GAS ENGINE

ÇAKIR M., Sezer K., Sezer S.
4th International Conference on Engineering and natural Science, Kiew, Ukrayna, 02 Mayıs 2018, ss.386, (Özet Bildiri)

6. EFFECT OF COMPRESSION RATIO ON THE PERFORMANCE OF A NATURAL GAS FIRED ENGINE

ÇAKIR M., SÖNMEZ H. İ.
4TH INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCE, Kıev, Ukrayna, 02 Mayıs 2018, ss.387, (Özet Bildiri)

7. The Wear Behaviour Borided Cast Iron Cylinder Liner on a Running Diesel Engine

ÇAKIR M., Akçay İ. H.
III. International Conference on Engineering and Natural Science (ICENS), Budapeşte, Macaristan, 03 Mayıs 2017, ss.614-618, (Tam Metin Bildiri)

8. Determination of Pre-combustion Chamber Design for a Stratified Charge Natural Gas Engine

ÇAKIR M., SÖNMEZ H. İ.
III. International Conference on Engineering and Natural Science (ICENS), Budapeşte, Macaristan, 03 Mayıs 2017, ss.609-613, (Tam Metin Bildiri)

9. Experimental Assessment of Heat Flux throughout Cylinder Wall in a Compression Ignition Engine

ÇAKIR M.
2nd International Conference on Engineering and Natural Science, Sarajova, Bosna-Hersek, 24 Mayıs 2016, ss.409-414, (Tam Metin Bildiri)

10. Effects of Piston Motion on Specific Surfaces of the Cylinder Liner in a Compression Ignition Engine

ÇAKIR M., AKÇAY İ. H.
icens 2015, 15 - 19 Mayıs 2015, (Tam Metin Bildiri)
Metrikler

Yayın

28

Yayın (WoS)

14

Yayın (Scopus)

13

Atıf (WoS)

105

H-İndeks (WoS)

5

Atıf (Scopus)

115

H-İndeks (Scopus)

5

Atıf (Scholar)

171

H-İndeks (Scholar)

8

Atıf (Diğer Toplam)

2

Toplam Atıf Sayısı

117

Proje

15

Fikri Mülkiyet

2

Tez Danışmanlığı

3

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları