Prof. Dr. Mihrigül EKŞİ ALTAN

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 33

1. Development and Characterization of PLA/PCL Blend Filaments and 3D Printed Scaffolds

Eryildiz M., Karakus A., Altan Eksi M.

Journal of Materials Engineering and Performance , cilt.34, sa.14, ss.14043-14054, 2025 (SCI-Expanded)

2. Auxetic behavior of Ti6Al4V lattice structures manufactured by laser powder bed fusion

GAVCAR B., Hasan A. S., Atıcı F. M., Altan M.

Materialpruefung/Materials Testing , cilt.67, sa.7, ss.1089-1103, 2025 (SCI-Expanded)

3. Design, FEA and experimental validation of 3D-printed PLA/PCL intervertebral cages for lumbar spinal fusion

Eryildiz M., Kadirhan O. A., Demirci M., Karakus A., Altan M.

Materialpruefung/Materials Testing , cilt.67, sa.6, ss.1014-1028, 2025 (SCI-Expanded)

4. Optimization of Thermal, Mechanical, Biodegradation, and Shape Memory Properties in 4D-Printed PLA/PCL Blends for Spinal Cages

Eryıldız M., Karakuş A., Demirci M., Altintas Kadirhan O. A., Ekşi Altan M.

POLYMERS FOR ADVANCED TECHNOLOGIES , cilt.36, sa.3, ss.1-17, 2025 (SCI-Expanded)

5. Development of porous customized Ti-6Al-4V cranial implant manufactured by laser beam powder bed fusion

EKŞİ ALTAN M., ACAR A., ÖZEN S., GÜLDORUM Y., Külle E., Apaydınlı B., et al.

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine , 2025 (SCI-Expanded)

6. Multifunctional property analysis of 3D-printed composite scaffolds from PLA/PCL filaments with graphene oxide reinforcement

Eryildiz M., Karakus A., EKŞİ ALTAN M.

Polymer Composites , 2025 (SCI-Expanded)

7. Scaffold fabrication from drug loaded HNT reinforced polylactic acid by FDM for biomedical applications

Kökcü İ., Eryıldız M., Altan M., Ertuğrul M. İ., Odabaş S.

POLYMER COMPOSITES , cilt.45, sa.2, ss.1-15, 2023 (SCI-Expanded)

8. Improvement of Mechanical and Biological Properties of PLA/HNT Scaffolds Fabricated by Foam Injection Molding: Skin Layer Effect and Laser Texturing

Eryıldız M., Altan M., Odabaş S.

International Polymer Processing , cilt.36, sa.5, ss.564-576, 2021 (SCI-Expanded)

9. Fabrication of polylactic acid/halloysite nanotube scaffolds by foam injection molding for tissue engineering

Eryıldız M., Altan M.

POLYMER COMPOSITES , cilt.41, sa.2, ss.757-767, 2020 (SCI-Expanded)

10. Effects of process parameters on the formability of sheet metal during plastic injection forming

ŞEN M., ŞENER B., EKŞİ ALTAN M.

Materialpruefung/Materials Testing , cilt.62, sa.5, ss.535-543, 2020 (SCI-Expanded)

11. Effect of structural hybrid design on mechanical and biological properties of CoCr scaffolds fabricated by selective laser melting

Özeren E., ALTAN M.

Rapid Prototyping Journal , cilt.26, sa.4, ss.615-624, 2019 (SCI-Expanded)

12. Polylactide/Halloysite Nanocomposite Foams: Particle Dispersion and Mechanical Strength

Eryıldız M., Altan M.

ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.619-621, 2019 (SCI-Expanded)

13. Foam Injection Molding of Polypropylene/Zinc Oxide Nanocomposite with Chemical Foaming Agent: Mechanical Properties and Morphology

ALTAN M., Osswald T.

JOURNAL OF TESTING AND EVALUATION , cilt.47, sa.2, ss.998-1008, 2019 (SCI-Expanded)

14. Accuracy estimation in drilling small holes on engineering plastics by a mathematical approach

UYSAL A., Altan M.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.232, sa.21, ss.3807-3813, 2018 (SCI-Expanded)

15. Effect of Process Parameters on Shear Layer Thickness in Injection Molded Short-Glass Fiber Reinforced Polypropylene

ALTAN M., Demirci M.

INTERNATIONAL POLYMER PROCESSING , cilt.33, sa.5, ss.714-720, 2018 (SCI-Expanded)

16. Cam Fiber Takviyeli Polimerlerin Plastik Enjeksiyonunda Fiber Yönlenmesinin İncelenmesi

ALTAN M., ERYILDIZ M.

Afyon Kocatepe Sosyal Bilimler Dergisi , cilt.18, ss.692-700, 2018 (SCI-Expanded)

17. An Experimental Study on Mechanical Behavior of Nanographene/Epoxy Nanocomposites

Altan M., UYSAL A.

ADVANCES IN POLYMER TECHNOLOGY , cilt.37, sa.4, ss.1061-1066, 2018 (SCI-Expanded)

18. Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strenght

ALTAN M., Demirci M., Gümüş B., Kahraman Y.

MATERIALPRUFUNG , cilt.60, sa.5, ss.1-5, 2018 (SCI-Expanded)

19. Characterization of hollow glass sphere reinforced epoxy composites: Dynamical mechanical analysis and morphology

Altan M., Gümüş B., KAHRAMAN Y.

Materialpruefung/Materials Testing , cilt.59, sa.3, ss.239-243, 2017 (SCI-Expanded)

20. Electrical, morphological, thermal and mechanical properties of low density polyethylene/zinc oxide nanocomposites prepared by melt mixing method

Yamak H. B., Altan M., Ahmet A.

Optoelectronics and Advanced Materials, Rapid Communications , cilt.10, ss.925-934, 2016 (SCI-Expanded)

21. Manufacturing polymer/metal macro-composite structure for vibration damping

Altan M., Bayraktar M., Yavuz B.

International Journal of Advanced Manufacturing Technology , cilt.86, ss.2119-2126, 2016 (SCI-Expanded)

22. A Novel Method for Manufacturing Polymer/Metal Hybrid Structures

Altan M., Yavuz B.

ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.639-641, 2016 (SCI-Expanded)

23. Quality during milling of a glass fiber reinforced polymer composite

UYSAL A., Altan M.

MATERIALS TESTING , cilt.57, sa.9, ss.767-772, 2015 (SCI-Expanded)

24. Surface Roughness of Milled Sheet Molding Compound Composites

UYSAL A., ALTAN M.

ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1218-1220, 2015 (SCI-Expanded)

25. Effects of process parameters on surface roughness in saw cutting of polypropylene/TiO2 nano composites

ALTAN M., UYSAL A., ALTAN E.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.36, sa.3, ss.615-621, 2014 (SCI-Expanded)

26. Investigation of burr formation and surface roughness in drilling engineering plastics

Altan M., ALTAN E.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.36, sa.2, ss.347-354, 2014 (SCI-Expanded)

27. Effects of compatibilizers on mechanical and antibacterial properties of injection molded nano-ZnO filled polypropylene

ALTAN M., Yildirim H.

Journal of Composite Materials , cilt.46, sa.25, ss.3189-3199, 2012 (SCI-Expanded)

28. Mechanical and Antibacterial Properties of Injection Molded Polypropylene/TiO2 Nano-Composites: Effects of Surface Modification

Altan M., Yidirim H.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , cilt.28, sa.8, ss.686-692, 2012 (SCI-Expanded)

29. Effects of cutting parameters on tool wear in drilling of polymer composite by Taguchi method

UYSAL A., ALTAN M., ALTAN E.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.58, ss.915-921, 2012 (SCI-Expanded)

30. Optimization of residual stresses in the surface regions of injection moldings

ALTAN M., Yurci M. E.

Polymer - Plastics Technology and Engineering , cilt.49, sa.1, ss.32-37, 2010 (SCI-Expanded)

31. Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods

Altan M.

MATERIALS & DESIGN , cilt.31, sa.1, ss.599-604, 2010 (SCI-Expanded)

32. Residual stresses determination in injection molded virgin and recycled HDPE blends: mechanical properties and morphology

ALTAN M., YURCİ M. E., Nugay N.

E-POLYMERS , 2008 (SCI-Expanded)

33. Prediction of chip flow angle in orthogonal turning of mild steel by neural network approach

Kiyak M., Altan M., Altan E.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.33, ss.251-259, 2007 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 10

1. Fabrication and characterization of 4D-printed graphene oxide-reinforced PLA/PCL spinal cages for minimally invasive fusion surgery

Eryildiz M., Altintas Kadirhan O., Demirci M., Karakus A., EKŞİ ALTAN M.

Progress in Additive Manufacturing , 2025 (ESCI)

2. Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study

İzgi B., Eryildiz M., Altan M.

International Journal of Advanced Design and Manufacturing Technology, , cilt.4, sa.2, ss.123-130, 2021 (Hakemli Dergi)

3. Effect of Chemical Foaming Agent in Enhancing Dispersion of Montmorillonite in Polypropylene Nanocomposite

Azguler O., ERYILDIZ M., ALTAN M.

Journal of Research Updates in Polymer Science , cilt.8, ss.1-6, 2019 (Hakemli Dergi)

4. Sac Metallerin Şekillendirilmesinde Farklı bir Uygulama: Plastik Enjeksiyon Kalıplamada Akışkan Basıncıyla Alüminyum Sacın Şekillendirilmesi

ALTAN M., Şen M.

Çukurova Üniversitesi Mühendislik Mimarlik Fakültesi Dergisi , cilt.32, ss.241-252, 2017 (Hakemli Dergi)

5. Effects of Micro and Nano Inorganics Particles on the Mechanical Properties of Polypropylene

ALTAN M., Yildirim H., UYSAL A.

Academic Journal of Science , cilt.1, sa.3, ss.15-24, 2012 (Hakemli Dergi)

6. Tensile Properties of Polypropylene Metal Oxide Nano Composites

ALTAN M., YILDIRIM H., UYSAL A.

The Online Journal of Science and Technology , cilt.1, sa.1, ss.25-30, 2011 (Hakemli Dergi)

7. Yapay Sinir Ağı Yöntemi ile Plastik Enjeksiyonda İmal Edilmiş Geri Dönüşümlü HDPE Parçaların Elastiklik Modülünün Tahmini

ALTAN M.

Mühendis ve Makine , cilt.59, sa.587, ss.17-22, 2008 (Hakemli Dergi)

8. Plastik Enjeksiyon Yöntemi İle İmal Edilen Parçalarda Oluşan Kalıntı Gerilmeler II: Plastik Parçalarda Kalıntı Gerilmelerin Ölçüm Teknikleri

ALTAN M.

Plastik , cilt.95, sa.1, ss.118-125, 2007 (Hakemli Dergi)

9. Plastik Enjeksiyon Yöntemi İle İmal Edilen Parçalarda Oluşan Kalıntı Gerilmeler I: Kalıntı Gerilmeleri Etkileyen Faktörler ve Alınan Önlemler

ALTAN M.

Plastik , cilt.93, sa.1, ss.100-108, 2007 (Hakemli Dergi)

10. Toz Enjeksiyon Kalıplama Yöntemi ile İmalatın Karakteristikleri

Altan M.

Plastik , cilt.68, sa.1, ss.100-104, 2003 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 30

1. DESIGN AND MECHANICAL ANALYSIS OF Ti6Al4V AUXETIC ACETABULAR CUP

Gavcar B., Atıcı F. M., Ekşi Altan M.

12th INTERNATIONAL MAY 19 INNOVATIVE SCIENTIFIC APPROACHES CONGRESS, Samsun, Türkiye, 24 - 25 Aralık 2024, ss.262, (Özet Bildiri) Sürdürülebilir Kalkınma

2. Effects Of Shape Recovery Temperature And Holding Time On 4d Printing Of Pla/Pcl Blend

Eryıldız M., Karakuş A., Ekşi Altan M.

8th INTERNATIONAL CONGRESS ON 3D PRINTING (ADDITIVE MANUFACTURING) TECHNOLOGIES AND DIGITAL INDUSTRY 2024, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-7

3. Improvement of Porous Customized Cranial Implant from Titanium Alloy Using Addive Manufacturing

Külle E., Apaydınlı B., Günay A., Güldorum Y., Özen S., Acar A., et al.

Additive Manufacturing Conference, Antalya, Türkiye, 25 - 27 Nisan 2024, ss.1-3, (Özet Bildiri)

4. 3D PRINTING FOR SURGICAL PLANNING: CASE REPORT

Altan M., Canter H. İ.

Additive Manufacturing Conference, İzmir, Türkiye, 6 - 08 Ekim 2022, ss.8-9

5. Development of Multifunctional Polymer Nanocomposite Scaffolds by 3D Printing for Biomedical Applications

Kökcü İ., Eryıldız M., Odabaş S., Altan M.

World Congress on Applied NanoTechnology, Erzurum, Türkiye, 24 - 26 Kasım 2021, cilt.1, sa.1, ss.98-101, (Tam Metin Bildiri)

6. A Case Study on The Generation of Tree-Like Supports For Fused Deposition Modelling

Eryıldız M., Dındogdu T., Altan M.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1501-1507, (Tam Metin Bildiri)

7. IMPROVEMENT MECHANICAL AND BIOLOGICAL PROPERTIES OF CoCr SCAFFOLDS FABRICATED BY SELECTIVE LASER MELTING

Özeren E., Altan M.

Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019, ss.11-12, (Özet Bildiri)

8. Effect of Halloysite Nanotube on Mechanical and Biological Properties of Polylactic Acid Scaffolds Fabricated by Foam Injection Molding

Eryıldız M., Altan M.

35th International Conference of the Polymer Processing Society, İzmir, Türkiye, 26 - 29 Mayıs 2019, ss.255, (Özet Bildiri)

9. IMPROVING ACCURACY OF OVERHANGING STRUCTURES FOR SELECTIVE LASER MELTING

KAPLAN M., ALTAN M.

4th INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 19 - 21 Aralık 2018, (Tam Metin Bildiri)

10. Improvement in Adhesion of Sandwich Structures With Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method

Sönmez M. E., Eker Gümüş B., Eryıldız M., Altan M.

4th International Conference on Advances In Mechanical Engineering, ICAME 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1038-1045, (Tam Metin Bildiri)

11. REDUCTION OF CYCLE TIME AND WARPAGE IN INJECTION MOLDING OF THIN WALLED POLYPROPYLENE BASED PRODUCT

DEMİRCİ U., ALTAN M.

4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 19 - 21 Aralık 2018, (Tam Metin Bildiri)

12. APPLICATION OF FOAM EXTRUSION TO ENHANCE THE PROPERTIES OF POLYPROPYLENE/MONTMORILLONITE NANOCOMPOSITES

ALTAN M., AZĞÜLER O.

4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 19 - 21 Aralık 2018, (Tam Metin Bildiri)

13. Improvement in Adhesion of Sandwich Structures With Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method

SÖNMEZ M. E., GUMUS B., DEMİRCİ M., ALTAN M.

4th International Conference on Advances In Mechanical Engineering, ICAME 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1038-1045, (Tam Metin Bildiri)

14. EFFECTS OF STRUCTURAL HYBRID DESIGN OF CoCr-ALLOY SCAFFOLDS FABRICATED BY SELECTIVE LASER MELTING FOR BIOMEDICAL APPLICATIONS

ÖZEREN E., ALTAN M.

The 18th International Conference on Machine Design and Production, 3 - 06 Temmuz 2018, (Özet Bildiri)

15. Effect of Scaffold Design on Mechanical and Biological Behavior of PLA Fabricated by Fused Deposition Modeling

ALTAN M., DEMİRCİ M., Temiz İ. C.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 19 Ekim 2017, ss.2202-2206, (Tam Metin Bildiri)

16. CONTROLLING FIBER ORIENTATION IN PLASTIC INJECTION MOLDING DEPENDING ON THERMAL CONDITIONS

ALTAN M., DEMİRCİ M.

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING, İstanbul, Türkiye, 25 Nisan 2017, ss.632-636, (Tam Metin Bildiri)

17. Optimization of Thermal Process Conditions on Extruder For Polylactic Acid

ALTAN M., DEMİRCİ M., KAHRAMAN Y.

1th International Conference on Energy and Thermal Engineering, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.647-651, (Tam Metin Bildiri)

18. DEVELOPMENT OF PROPERTIES POLYMER COMPOSITE FOAMS OBTAINED BY FOAM INJECTION MOLDING

ALTAN M., Gürkan D.

ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE, İstanbul, Türkiye, 04 Ocak 2017, ss.1-8, (Tam Metin Bildiri)

19. NANO ZnO TAKVİYELİ YÜKSEK YOĞUNLUKLU POLİETİLENİN ANTİBAKTERİYEL VE MEKANİK ÖZELLİKLERİNİN GELİŞTİRİLMESİNDE NANO PARTİKÜL MODİFİKASYONUN ETKİSİ

ALTAN M., Yıldırım H.

II.ULUSAL EGE KOMPOZİT MALZEMELER SEMPOZYUMU, 01 Kasım 2013, (Tam Metin Bildiri)

20. Ultra Yüksek Moleküler Ağrılıklı Polietilenin Matkapla Delinmesinde Delik Hassasiyetinin Pratik Bir Yöntemle Belirlenmesi

ALTAN M., UYSAL A.

3. Ulusal Tasarım İmalat ve Analiz Kongresi, Türkiye, 29 - 30 Kasım 2012, cilt.1, ss.153-159, (Tam Metin Bildiri)

21. Ultra Yüksek Moleküler Ağırlıklı Polietilenin Matkapla Delinmesinde Delik Hassasiyetinin Pratik Bir Yöntemle Belirlenmesi

ALTAN M.

3.Ulusal Tasarım İmalat ve Analiz Kongresi, Balıkesir, 01 Ekim 2012

22. Ultra Yüksek Moleküler Ağırlıklı Polietilenin Matkapla Delinmesinde Çapak Oluşumunun Taguchi Metodu ile İncelenmesi

ALTAN M.

III.Talaşlı İmalat Sempozyumu, Ankara, 01 Ekim 2012

23. Nano Partikül Takviyeli Polimer Matrisli Kompozitlerin Testere ile Kesilmesinde İşlem Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin İncelenmesi

ALTAN M., UYSAL A., ALTAN E.

VI. Makina Tasarım ve İmalat Teknolojileri Kongresi, Türkiye, 22 - 23 Ekim 2011, cilt.1, ss.375-379, (Tam Metin Bildiri)

24. Effects of Nano Zno Particles on Antibacterial and Mechanical Properties of Polypropylene Matrix Composites

ALTAN M., Yıldırım H.

14 th International Conference on Advances in Materials & Processing Technologies, İstanbul, Türkiye, 13 Temmuz 2011, ss.1-7

25. Tensile Properties of Polypropylene/Metal Oxide Nano Composites

ALTAN M.

International Science and Technology Conference, 01 Ekim 2010, (Tam Metin Bildiri)

26. Mechanical and Morphological Properties of Polypropylene and High Density Polyethylene Matrix Composites Reinforced with Surface Modified Nano Sized TiO2 Particles

ALTAN M.

International Conference on Materials Science and Engineering, 01 Ekim 2010

27. SEBS-g-MA ile Kaplanmış ve Kaplanmamış Nano Boyutlu TiO2 Takviyeli Polipropilen Matrisli Kompozitlerin Mekanik Özelliklerinin İncelenmesi

ALTAN M.

III. Ulusal Polimer Bilim ve Teknoloji Kongresi, 01 Mayıs 2010

28. Plastik Enjeksiyonla İmal Edilmiş Polistiren Parçalarda Kalıntı Gerilmelerin Araştırılması

Altan M., Altan M.

IV. Makine Tasarım ve İmalat Teknolojileri Kongresi

29. Silikon Kalıp İmalatında Hızlı Prototip Teknolojisi Uygulaması

Altan M., Altan M.

II. Makine Malzemesi ve İmalat Teknolojisi Sempozyumu,

30. Improving Bending Behavior of Sandwich Structures with Polypropylene Honeycomb Cores

ALTAN M., Sönmez M.

2nd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, Proceedings Book, 259-261

Kitaplar 3

Yayınlar & Eserler