Microstructural Analysis of Inconel 625 Nickel Alloy / UNS S31803 Duplex Stainless-Steel Dissimilar Weldments

Karahan T., Mert T., Tümer M., Kerimak Z. M.

ADVANCED TECHNOLOGIES AND MATERIALS, cilt.44, sa.1, ss.15-19, 2019 (Hakemli Dergi)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 44 Sayı: 1
  • Basım Tarihi: 2019
  • Doi Numarası: 10.24867/atm-2019-1-003
  • Dergi Adı: ADVANCED TECHNOLOGIES AND MATERIALS
  • Derginin Tarandığı İndeksler: EBSCO Education Source
  • Sayfa Sayıları: ss.15-19
  • Yıldız Teknik Üniversitesi Adresli: Evet

Özet

In this study, Inconel 625 nickel alloy and UNS 31803 duplex stainless steel (DSS) dissimilar pairs were welded with MIG welding process. Weld metal, obtained with ERNiCrMo-3 filler wire, was subjected to mechanical and microstructural investigations. Notch impact test and micro hardness measurements were realized on weld metal in order to evaluate31803 mechanical properties. Microstructural changes in fusion line of the base metals were examined using optical and electron microscopes. Phase precipitations rich of Ti and Mo elements were detected among dendritic austenite arms in the weld metal. It was observed that ERNiCrMo-3 filler metal had sufficient toughness because of high nickel content.