Akademik Veri Yönetim Sistemi
3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2023, İstanbul, Türkiye, 4 - 06 Ekim 2023, cilt.61, ss.268-276
The fracture forming limit curve is an essential tool giving information about fracture initiation in metal forming applications. In order to obtain a fracture-forming limit curve, the Nakajima test should be carried out. However, these tests are costly and time-consuming processes. Therefore, companies in the automotive industry tended to use non-expensive numerical approaches to determine the material's formability limits. In this work, an anisotropic polynomial yield criterion was implemented to calibrate the different ductile fracture models, including only or both the stress triaxiality and the Lode parameter's effect. Analyses of different uniaxial tensile test geometries were carried out, and the two-dimensional fracture loci were constructed by different ductile fracture models. Correspondingly, the fracture-forming limit curves were predicted by the two-dimensional fracture loci. The results showed that the ductile fracture models, including only the stress triaxiality effect, provide an acceptable performance covering the range from uniaxial tension and the plane strain tension lines, while the models, including the stress triaxiality and Lode parameter, provide a plausible prediction performance throughout the whole range for forming limit diagram.