Influence of suspension pumping on the flexural properties of metal-filled photopolymer composites fabricated by masked stereolithography
International Journal of Advanced Manufacturing Technology, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Basım Tarihi: 2026
- Doi Numarası: 10.1007/s00170-026-19216-w
- Dergi Adı: International Journal of Advanced Manufacturing Technology
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, IBZ Online, Compendex, INSPEC, DIALNET, Academic Search Ultimate (EBSCO), Engineering Source (EBSCO), Materials Science & Engineering Collection (ProQuest), Technology Collection (ProQuest)
- Anahtar Kelimeler: 3d printing, Bending, Filler, Microparticles, Stereolithography
- Yıldız Teknik Üniversitesi Adresli: Evet
Özet
This study investigates the influence of suspension pumping on the flexural properties of Al- and 316L steel-reinforced microcomposites fabricated by modified masked stereolithography (mSLA). We investigated composites with 10, 30, and 50 wt.% steel and 10 and 30 wt.% Al. A periodic suspension-feeding system was integrated into the printing process to improve particle dispersion and reduce sedimentation. Secondary electron microscopy (SEM) showed that pumping improved filler homogeneity and reduced voids and delamination, particularly in steel-filled composites. Ultraviolet–Visible (UV–Vis) spectrophotometer measurements revealed that steel particles exhibited higher absorbance near the curing wavelength, thereby limiting resin curing efficiency. Three-point bending tests demonstrated that increasing filler content generally reduced flexural strength and modulus. At the same time, suspension pumping improved the mechanical performance of resin-Al composites by promoting more uniform particle distribution. In contrast, suspension pumping decreased the flexural stress of resin-steel composites because steel absorbs more light than Al. The results highlight the combined influence of filler content, particle distribution, and optical absorbance on the bending behavior of mSLA-printed microcomposites.