Three-dimensional flow evolution and turbulence characteristics of confined propeller jets over a rigid bed


Güner H. A., Yüksel Y., Çelikoğlu Y., Bilmez Y., Gürek B.

ELSEVIER OCEAN ENGINEERING SERIES, cilt.370, 2026 (Scopus)

Özet

Propeller-induced jets generated by vessels operating under limited under-keel clearance can produce intense hydrodynamic loads on the seabed, leading to local scour, potential damage to port infrastructure, and navigation problems. This study investigates the three-dimensional flow evolution, turbulence structure, and bed shear stress characteristics of confined propeller jets over a rigid rough bed using Particle Image Velocimetry (PIV). Experiments were performed with three Wageningen B-series propellers (Dp=6.5, 10, and 13 cm) operating at rotational speeds of 590, 670, and 745 rpm under two bed-clearance conditions (G=10 and 15 cm). Within the tested configurations, variations in the gap ratio G/Dp were systematically associated with changes in jet–bed interaction. For G/Dp ≤ 1, confinement suppresses vertical entrainment, promotes asymmetric jet development, and induces a transition from free-jet to wall-jet flow through a bed-impingement region. The jet subsequently attaches to the bed due to the Coandă effect, generating enhanced near-bed velocities and localized turbulence. Reynolds stress distributions show that confinement restricts turbulence development and alters momentum transfer. Estimated bed shear stress increased rapidly within the transition region, indicating enhanced near-bed hydraulic loading relevant to scour initiation. A condition-specific engineering relationship, obtained by combining an existing empirical near-bed velocity relationship with a conventional wall-shear-stress formulation, was evaluated for estimating the maximum bed shear stress within the investigated parameter range.