Cobalt-doped CuO photocathodes with improved surface morphology for effective photoelectrochemical hydrogen production: performance assessment


AKGÜN İ., DİNCER İ.

Surfaces and Interfaces, cilt.103, 2026 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 103
  • Basım Tarihi: 2026
  • Doi Numarası: 10.1016/j.surfin.2026.111182
  • Dergi Adı: Surfaces and Interfaces
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, INSPEC
  • Anahtar Kelimeler: Cobalt doping, CuO photocathodes, Efficiency, Energy, Exergy, Interfacial charge transfer, Photoelectrochemical hydrogen production, Surface morphology
  • Yıldız Teknik Üniversitesi Adresli: Evet

Özet

In this study, the pristine and Co-doped CuO photocathodes with nominal Co contents of 0, 2, 5, 10, and 15 % were fabricated on fluorine-doped tin oxide by spin coating to investigate composition-dependent photoelectrochemical hydrogen production. The XRD, FE-SEM, EDS, and XPS characterization analyses revealed morphological changes and successful cobalt incorporation while retaining the predominant monoclinic CuO phase. The 10% Co/CuO film exhibited the strongest visible-light absorbance and an apparent direct optical gap of 1.56 eV. Its fitted CuO/FTO interfacial resistance contribution decreased from 13.43 to 5.91 kΩ relative to pristine CuO, while Mott-Schottky analysis indicated retained p-type behavior and a flat-band potential of +0.137 V vs. RHE. Under 100 mW cm−2 illumination in 0.5 M KOH, this composition reached an illuminated cathodic current density of approximately -500 μA cm−2 at +0.420 V vs. RHE. Volumetric measurements yielded approximately 9800 μmol g−1 of hydrogen over 120 min, corresponding to an average production rate of 4898 μmol g−1 h−1, twice that of pristine CuO. The calculated energy, exergy, and volumetrically derived Faradaic efficiencies reached 0.500%, 0.518%, and 94.34%, respectively. An extended 10 h experiment reached approximately 13,900 μmol g−1, with a declining production rate at longer times. Increasing the Co content to 15% reduced PEC performance despite further optical-gap narrowing. These findings identify 10% Co/CuO as the best-performing composition within the investigated series and associate its enhanced hydrogen production with concurrent optical, morphological, and interfacial changes.