Congo Red Removal From Aqueous Solutions Using Plant-Extract-Assisted ZnO Nanoparticles: Kinetic and Isotherm Analyses
ChemistrySelect, cilt.11, sa.41, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 11 Sayı: 41
- Basım Tarihi: 2026
- Doi Numarası: 10.1002/slct.74964
- Dergi Adı: ChemistrySelect
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chemical Abstracts Core, Academic Search Ultimate (EBSCO)
- Anahtar Kelimeler: adsorption isotherms, adsorption kinetics, dye adsorption, surface heterogeneity, zinc oxide nanoparticles
- Yıldız Teknik Üniversitesi Adresli: Evet
Özet
Green-synthesised zinc oxide nanoparticles (ZnO NPs) were prepared using Equisetum arvense extract and evaluated as nano-adsorbents for Congo red (CR) removal from aqueous solutions. Their physicochemical, morphological, elemental, and crystalline properties were characterised using dynamic light scattering (DLS), zeta-potential analysis, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). DLS showed an average hydrodynamic size of 365.2 nm and a polydispersity index of 0.341, while the zeta potential of −24.7 mV indicated moderate colloidal stability and a tendency toward aggregation. FTIR indicated plant-derived surface functional groups and a Zn─O absorption feature at 450–500 cm−1. XRD showed hexagonal wurtzite ZnO as the predominant crystalline phase. Batch experiments showed that maximum removal efficiency reached 86.79% after 180 min for 30 mg L−1 CR using 5 mg ZnO NPs, while equilibrium adsorption capacity increased from 3.11 to 71.11 mg g−1 with increasing CR concentration. The pseudo-second-order kinetic model provided the best fit among the evaluated kinetic models (R2 = 0.9993). The Freundlich fit (R2 = 0.9327) was consistent with surface heterogeneity, while the low Dubinin–Radushkevich mean adsorption energy suggested a contribution from physical adsorption.