Boron oxide and magnesium oxide as an additıve vanadic corrosion inhibitor for heavy fuel oil


Al-Hakeem J. A. M. J., Al-Jumaili M. H. A., ŞAHİN Y.

Chemical Papers, 2025 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Basım Tarihi: 2025
  • Doi Numarası: 10.1007/s11696-025-03913-z
  • Dergi Adı: Chemical Papers
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chemical Abstracts Core
  • Anahtar Kelimeler: Ash, Boron oxide, Heavy fuel oil, Magnesium oxide, Melting point, Vanadium
  • Yıldız Teknik Üniversitesi Adresli: Evet

Özet

Boron oxide (B2O3) is investigated as a second oxide with regard to magnesium oxide (MgO) to inhibit the vanadic corrosion caused by the ash resulting from burning heavy fuel oil (HFO). The inhibitory effect is achieved by changing the composition of the resultant ash by forming higher melting points components as magnesium pyroborate (Mg2B2O5) (PB) and magnesium orthoborate (Mg3B2O6) (OB) that in turn reacts with corrosive, low melting point vanadium oxide (V2O5) to yield refractory higher melting point magnesium orthovanadate (Mg3V2O8) (OV). MgO nanoparticles were successfully synthesized by co-precipitation technique at room temperature using magnesium nitrate and sodium hydroxide as a precursor, and B2O3 was successfully synthesized by thermal decomposition of boric acid. Both oxides were sonicated with oleic acid (OA). The morphological investigation of both nanoparticles oxides was done by Scanning Electron Microscope (SEM–EDX), X-ray Diffraction (XRD) for indicating the crystallinity and crystal size of nanoparticle, Fourier Transform Infrared spectroscopy for analyzing the functional groups of the samples. Nanoparticle oxides suspended in OA was added to HFO which is burned to obtain ash according to ASTM D482. The morphological investigation and composition of the ash were done by (SEM) and (XRD) to identify and compare the resulting compounds before and after the addition of the oxides.