Process intensification of electrocoagulation via perforated electrode configurations and radical-driven advanced oxidation: Optimization and energy efficiency
Chemical Engineering and Processing - Process Intensification, cilt.230, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 230
- Basım Tarihi: 2026
- Doi Numarası: 10.1016/j.cep.2026.111095
- Dergi Adı: Chemical Engineering and Processing - Process Intensification
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chemical Abstracts Core, Chimica, Compendex, INSPEC, Academic Search Ultimate (EBSCO), Engineering Source (EBSCO)
- Anahtar Kelimeler: Electrocoagulation, Hybrid treatment, Mdf wastewater, Perforated electrodes, Radical-based oxidation
- Yıldız Teknik Üniversitesi Adresli: Evet
Özet
This study investigated the electrocoagulation (EC) treatment of medium-density fibreboard (MDF) wastewater and evaluated the effects of electrode configuration and oxidants on process performance. Three configurations of iron electrodes were compared in terms of chemical oxygen demand (COD) removal and energy consumption: perforated anode–perforated cathode (PF1–PF2), perforated anode–plate cathode (PF1–PL) and plate anode–plate cathode (PL–PL). The effects of electrolysis time and electrolyte type (NaCl and Na2SO4) were also examined. The PF1–PF2 configuration using Na2SO4 achieved similar COD removal efficiencies while reducing energy consumption by almost 50% compared to the other configurations. Based on these results, the process was optimized using a Box–Behnken design, producing a reliable model fit (R2=0.9236). The optimum conditions were a pH of 4.0, a current of 0.66 A, an electrolysis time of 58.3 min and a Na2SO4 concentration of 0.03 M. This resulted in 87.16% COD removal with low energy consumption (4.27 kWh/m3). In the second stage, hydrogen peroxide (HP), peroxymonosulfate (PMS) and peroxydisulfate (PDS) were combined with EC. The EC–HP process demonstrated the greatest effectiveness, achieving 94.60% COD removal at a concentration of 0.7 g/L of HP, a current of 1 A, and an electrolysis time of 60 min.