Effects of high-dosage copper oxide nanoparticles addition in diesel fuel on engine characteristics


Ağbulut Ü., Sarıdemir S., Rajak U., Polat F., Afzal A., Verma T. N.

Energy, vol.229, 2021 (SCI-Expanded) identifier

  • Publication Type: Article / Article
  • Volume: 229
  • Publication Date: 2021
  • Doi Number: 10.1016/j.energy.2021.120611
  • Journal Name: Energy
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Aerospace Database, Applied Science & Technology Source, Aquatic Science & Fisheries Abstracts (ASFA), CAB Abstracts, Communication Abstracts, Computer & Applied Sciences, Environment Index, INSPEC, Metadex, Pollution Abstracts, Public Affairs Index, Veterinary Science Database, Civil Engineering Abstracts
  • Keywords: Combustion, Copper oxide, Emission, Nanofuel, Nanoparticle, Performance
  • Yıldız Technical University Affiliated: No

Abstract

This paper examines the effect of adding high dosage of copper oxide (CuO) nanomaterials (<77 nm) directly to conventional diesel fuel. The performance of the fuel with CuO added is assessed using a single cylinder, naturally aspirated, direct injection, air-cooled diesel engine. Examined were the characteristics of combustion and emissions for blends of 1000 and 2000 ppm CuO nanoparticles. The CuO blends were tested in the speed range between 2000 and 3000 rpm at intervals of 250 rpm. The CuO nanoparticles have the potential to accelerate the process of combustion by supplying molecules of oxygen and acting as a catalyst. The CuO enhances the thermal conductivity of the test fuels and increases heat dissipation from the combustion chamber. Experimental results show exhaust gas temperature (EGT) is reduced as well as unburnt hydro-carbons (HC) and oxides of carbon and nitrogen (CO and NOx). For CuO additions of 1000 and 2000 ppm, CO emissions fell by 14.6% and 20.8%, HC emissions by 6.2% and 13.4%, and NOx emissions by 4%, and 4.7%. Both blends of CuO increased the heating value of the diesel fuel. Brake-specific fuel consumption (BSFC) dropped by 4.5% and 8% while brake thermal efficiency (BTE) increased by 5.5% and 14.6% for 1000-CuO and 2000-CuO, respectively. On the other hand, nanoparticles accelerated the chemical reactions and the ignition delay (ID) period was shortened by 3.03% and 5.45% for CuO additions of 1000, and 2000 ppm, respectively. It was also observed that CuO nanoparticles up to 2000 ppm can be suspended in diesel fuel without clogging the filter on the injection system.