Comparative Study of Direct Integration Schemes for Nonlinear Time History Analysis of High-Rise Reinforced Concrete Buildings
18th European Conference of Earthquake Engineering, Berlin, Almanya, 14 - 18 Eylül 2026, ss.1-7, (Tam Metin Bildiri)
- Yayın Türü: Bildiri / Tam Metin Bildiri
- Basıldığı Şehir: Berlin
- Basıldığı Ülke: Almanya
- Sayfa Sayıları: ss.1-7
- Yıldız Teknik Üniversitesi Adresli: Evet
Özet
High-rise buildings are defined based on
height-related classification criteria, which vary depending on factors such as
location, function, and overall building height. Due to their long fundamental
periods, large lateral displacements, and typically slender configurations, the
seismic design of high-rise buildings is considerably more complex and
demanding than that of conventional low- and mid-rise structures. High-rise buildings require multi-stage design,
where strength-based preliminary designs are validated through
performance-based evaluations to meet code requirements.
Unlike standard buildings, high-rises
often require mandatory structural health monitoring systems, and both seismic
and wind effects govern their design. Due to the need for high precision, even
small modeling or analysis errors can lead to unsafe outcomes. As is well known, nonlinear time history analyses are mandatory in
the performance-based evaluation of high-rise buildings. A time history
analysis involves the direct integration of the system’s equations of motion
under seismic loading. Direct integration methods are commonly employed in
structural dynamics to solve the equations of motion for both linear and
nonlinear systems. Several numerical
schemes are available for the direct integration of these equations, each
exhibiting different stability characteristics under specific conditions. Among
them, the Newmark method is the most widely used. In particular, the Newmark
average acceleration method is unconditionally stable and does not introduce
numerical damping, which has contributed to its widespread adoption. In
addition, other direct integration methods that incorporate numerical damping
while maintaining conditional stability are also available and can be
implemented in most structural analysis software. This study investigates the
influence of different direct integration methods, including Newmark, Wilson-θ,
and Hilber–Hughes–Taylor (HHT), on the performance-based design of a high-rise
reinforced concrete building. For this purpose, a series of nonlinear
time-history analyses were performed using ETABS. The
results were comparatively evaluated to assess the impact of each method on
structural response. The findings indicate that all direct integration methods
yield nearly identical results in terms of story forces and story
displacements. However, the primary difference among them lies in the analysis
duration. When the commonly preferred Newmark method is used, the analysis time
becomes unnecessarily longer compared to the others.