Effect of particle size on SiO2 nanofluid viscosity determined by a two-step method

Yalçın G., Öztuna S., Dalkılıç A. S., Wongwises S.

Journal of Thermal Analysis and Calorimetry, cilt.149, sa.9, ss.13681-13696, 2024 (SCI-Expanded)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 149 Sayı: 9
  • Basım Tarihi: 2024
  • Doi Numarası: 10.1007/s10973-024-13403-1
  • Dergi Adı: Journal of Thermal Analysis and Calorimetry
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, Chemical Abstracts Core, Chimica, Communication Abstracts, Compendex, Index Islamicus, INSPEC, Metadex, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.13681-13696
  • Yıldız Teknik Üniversitesi Adresli: Evet

Özet

AbstractAccording to review of the literature, the influence of nanoparticle diameter with irregular shapes on viscosity requires further research since there is no relation between particle size and nanofluid stability. In this study, SiO2/EG–water-based nanofluid samples were prepared, and their viscosities were experimentally determined. SiO2 nanoparticles had sizes of 7, 15, and 40 nm, and the base fluid was a 50% ethylene glycol and 50% water mixture. Nanofluid samples were prepared using a two-step technique. Viscosity change was measured every 10 °C from 20 to 60 °C. The maximum viscosity values were observed for 7, 15, and 40 nm particles over an entire concentration range. Considering all measurements, the highest viscosity increase was 60.51% for 3% SiO2 (7 nm) at 60 °C, and the lowest viscosity change was 7.72% for 1% SiO2 (40 nm) at 40 °C. The most stable sample of the current study was 1% SiO2 (15 nm), and its Zeta potential was − 35.6 mV. Finally, a new empirical equation that included temperature, particle diameter, and concentration terms is suggested to predict dynamic viscosity, with R adj 2  = 0.98. It was also compared with previous correlations.