Doç. Dr. Burçin ÖZBAY KISASÖZ

Yayın Ağı

Makaleler 23

1. Tailoring the corrosion behavior of hot-pressed aluminium-CeO2 composites

ÖZBAY KISASÖZ B., Erol M., BAYRAK Y., KISASÖZ A.

Materials Letters , cilt.404, 2026 (SCI-Expanded, Scopus)

2. Hollow Glass Sphere Modification Effect on Mechanical Properties of Powder Bed Fusion Processed Polyamide 12 Parts

Coşkun M. C., Alparslan A., Cingöz U. C., Coşkun M., Özbay Kısasöz B., Koç E., et al.

Journal of Applied Polymer Science , cilt.143, sa.2, 2026 (SCI-Expanded, Scopus)

3. Hot-Pressing Process of 7075 Aluminum Alloy: Microstructure, Corrosion and Wear Properties

Cingöz U. C., CÖMERT Z. Y., ÖZBAY KISASÖZ B., BAYRAK Y., SEZER R., KISASÖZ A.

Journal of Materials Engineering and Performance , 2026 (SCI-Expanded, Scopus)

4. Unveiling the influence of CeO₂ rare-earth oxide content on in-situ phase formation and properties of aluminium matrix composites

Erol M., BAYRAK Y., ÖZBAY KISASÖZ B., Yılmaz M. A., Özkan D., KISASÖZ A.

CERAMICS INTERNATIONAL , cilt.51, sa.28, ss.57819-57831, 2025 (SCI-Expanded, Scopus)

5. Synergetic effect of Y2O3 rare-earth oxide and in-situ phases on corrosion and wear properties of AlSi10Mg aluminium matrix composites produced by hot pressing

Cingöz U. C., Özbay Kısasöz B., BAYRAK Y., KISASÖZ A.

Ceramics International , cilt.51, sa.24, ss.43111-43124, 2025 (SCI-Expanded, Scopus)

6. Corrosion and wear properties of building direction dependent as-built AlSi10Mg aluminium alloy printed by selective laser melting

Tarakçı G., Özbay Kısasöz B., Özer G., KISASÖZ A.

Materials Chemistry and Physics , cilt.342, 2025 (SCI-Expanded, Scopus)

7. Influence of initial grain size on the formation of sigma and its effect on corrosion and wear properties of 2205 duplex stainless steel

Özbay Kısasöz B.

Materials Chemistry and Physics , cilt.339, 2025 (SCI-Expanded, Scopus)

8. Large-Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers

Kuşoğlu I. M., Garg S., Abel A., Balachandran P. V., Barcikowski S., Becker L., et al.

Advanced Engineering Materials , cilt.27, sa.14, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

9. Energy density optimization in laser-based powder bed fusion of nano-modified PA12 powder feedstocks

Grünewald M., Ziefuss A. R., Schlör C., Popp K., Gann S., Kusoglu I. M., et al.

Journal of Materials Science , cilt.60, sa.28, ss.12056-12071, 2025 (SCI-Expanded, Scopus)

10. The combined effect of energy density and hollow microspheres additive on structural and wear properties of polyamide 11 composites produced via selective laser sintering

Cingöz U. C., Özbay Kısasöz B., KISASÖZ A.

Materials Letters , cilt.381, 2025 (SCI-Expanded, Scopus)

11. Influence of High-Velocity Oxy-fuel Sprayed Cr₃C₂-NiCr Coating on Corrosion and Wear Properties of AISI 2205

Işık R. G., Özbay Kısasöz B., Tarakçı G., Karabeyoğlu S. S., Uğuz T., KISASÖZ A.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.34, sa.4, ss.2882-2896, 2025 (SCI-Expanded, Scopus)

12. Characterization of Al/B4C–Y2O3 hybrid composites produced by vacuum hot pressing combined with Al2O3–Y2O3 interaction

BAYRAK Y., Özbay Kısasöz B., Tarakçı G., KISASÖZ A.

Ceramics International , cilt.50, sa.19, ss.36230-36242, 2024 (SCI-Expanded, Scopus)

13. Corrosion inhibition of AlSi10Mg additively manufactured parts in 3.5% NaCl solution

ÖZBAY KISASÖZ B.

Journal of Advances in Manufacturing Engineering , 2024 (TRDizin)

14. Investigation of wear behavior of PA 12 matrix ceramic reinforced composites produced by selective laser sintering method Seçici lazer sinterleme yöntemiyle üretilen PA 12 matrisli seramik takviyeli kompozitlerin aşınma davranışının incelenmesi

Kısasöz B., Tütük İ., Koç E., Karabeyoğlu S. S., KISASÖZ A.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.39, sa.2, ss.1029-1035, 2024 (SCI-Expanded, Scopus, TRDizin)

15. Electrochemical corrosion behaviour of UNS S32205 duplex stainless steel dependent on sigma phase precipitation

Kısasöz B., Tütük İ., ACAR S., KISASÖZ A.

Materialpruefung/Materials Testing , 2024 (SCI-Expanded, Scopus)

16. Dry sliding wear behavior of energy density dependent PA 12/Cu composites produced by selective laser sintering

Özbay Kısasöz B., Koç E., Kısasöz A., Karabeyoǧlu S. S.

Materialpruefung/Materials Testing , cilt.65, sa.2, ss.303-312, 2023 (SCI-Expanded, Scopus)

17. Estimation of surface roughness in selective laser sintering using computational models

Koç E., ZEYBEK S., Kısasöz B., Çalışkan C. İ., Bulduk M. E.

International Journal of Advanced Manufacturing Technology , cilt.123, sa.9-10, ss.3033-3045, 2022 (SCI-Expanded, Scopus)

18. Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives

Özbay Kısasöz B., Serhatlı İ. E., Bulduk M. E.

Journal of Materials Engineering and Performance , cilt.31, sa.5, ss.4049-4059, 2022 (SCI-Expanded, Scopus)

19. Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites

Ozbay B., BEKEM A., Serhatlı İ. E., ÖZTÜRK S., Bulduk M. E.

MATERIALS TECHNOLOGY , cilt.37, sa.10, ss.1541-1553, 2022 (SCI-Expanded, Scopus)

20. Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method

Özbay B., Serhatlı İ. E.

Materials Technology , cilt.37, sa.4, ss.213-223, 2022 (SCI-Expanded, Scopus)

21. Effect of dendritic copper powder addition to polyamide 12 in selective laser sintering

Bekem A., Ozbay B., Bulduk M. E.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.1, ss.421-431, 2021 (SCI-Expanded, Scopus, TRDizin)

22. Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC)

Özer G., Özbay B., Öter Z. Ç., Tarakçi G., YILMAZ M. S., Bulduk M. E., et al.

International Journal of Cast Metals Research , cilt.33, sa.2-3, ss.146-152, 2020 (SCI-Expanded, Scopus)

23. Manufacturing of Hybrid Yarn Thermoplastic Composites by the Method of Filament Winding

Ozbay B., BEKEM A., ÜNAL A.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.33, sa.1, ss.214-227, 2020 (ESCI, Scopus, TRDizin)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 13

1. Characterization of Copper-Reinforced PA 12 Composites via Ultrasonic Testing

GÜNEŞ D., CİNGÖZ U. C., COŞKUN M., ÖZBAY KISASÖZ B., KALELİ ALAY T., YAMAN U.

Additive Manufacturing Conference Türkiye-AMC 2025, Antalya, Türkiye, 28 Nisan 2025, (Özet Bildiri)

2. Effect of Sliding Distance on The Wear Behavior of SLS-Printed PA12

CİNGÖZ U. C., ÖZBAY KISASÖZ B., KOÇ E., KISASÖZ A.

Additive Manufacturing Conference Türkiye-AMC 2025, Antalya, Türkiye, 28 Nisan 2025, (Özet Bildiri)

3. PBF-LB Process Parameter Effects on Functionalized PA12 Powder Feedstocks Produced via Dissolution-Precipitation Process

COŞKUN M. C., ÖZBAY KISASÖZ B.

Polimer 2024, Ankara, Türkiye, 16 - 18 Ekim 2024, (Özet Bildiri)

4. A Preliminary Study on the Corrosion and Wear Behaviors of Artificially Aged AlSi10Mg Produced by Additive Manufacturing

ÖZBAY KISASÖZ B., TÜTÜK İ., KOÇ E., KISASÖZ A.

Additive Manufacturing Conference Türkiye-AMC 2024, Antalya, Türkiye, 25 - 27 Nisan 2024, (Özet Bildiri)

5. Characterization of PA12 Matrix Composites Produced by the Selective Laser Sintering Method

CİNGÖZ U. C., ÖZBAY KISASÖZ B., KISASÖZ A.

3rd International Materials Technologies and Metallurgy Conference 2023, İstanbul, Türkiye, 11 - 13 Ekim 2023, (Özet Bildiri)

6. A Preliminary Study on Potentiodynamic Polarisation Behaviour of UNS S32760 Duplex Stainless Steel

ÖZBAY KISASÖZ B.

9th International Conference on Engineering and Natural Sciences, Saraybosna, Bosna-Hersek, 17 - 21 Mayıs 2023, (Tam Metin Bildiri)

7. Influence of Microstructure Properties on Potentiodynamic Polarisation Behaviour of Aged Duplex Stainless Steel

URAL M. M., ÖZBAY KISASÖZ B., KISASÖZ A.

9th International Conference on Engineering and Natural Sciences, Saraybosna, Bosna-Hersek, 17 - 21 Mayıs 2023, (Özet Bildiri)

8. Influence Of Dry Sliding Test Temperature On Wear Properties Of The Pa 12 Composites

ÖZBAY KISASÖZ B., TÜTÜK İ., KOÇ E., KISASÖZ A., KARABEYOĞLU S. S.

9th International Conference on Engineering and Natural Sciences, Saraybosna, Bosna-Hersek, 17 - 20 Mayıs 2023, (Özet Bildiri)

9. Influence of Ceramic-Based Additives on the Dry Sliding Wear Behavior of PA12 Produced by SLS

ÖZBAY KISASÖZ B., TÜTÜK İ., KOÇ E., KARABEYOĞLU S. S., KISASÖZ A.

Additive Manufacturing Conference Turkey 2022-AMC TURKEY, Kuşadası/AYDIN, Türkiye, 6 - 08 Ekim 2022, (Özet Bildiri)

10. Influence of Ceramic-based Additives on the Dry Sliding Wear Behaviour of PA 12 Produced by SLS

ÖZBAY KISASÖZ B., TÜTÜK İ., KARABEYOĞLU S. S., KOÇ E., KISASÖZ A.

Additive Manufactruing Conference (AMC TURKEY) 2022, Aydın, Türkiye, 6 - 08 Ekim 2022, ss.90-91, (Özet Bildiri)

11. Hollow Glass Microsphere and Glass Bead-Polyamide 12 Composites Production by Selective Laser Sintering Method

ÖZBAY KISASÖZ B., SERHATLI İ. E., BULDUK M. E.

IMMC 2021, İstanbul, Türkiye, 10 - 12 Haziran 2021, (Tam Metin Bildiri)

12. Production of PRIMECAST® Polystyrene by Selective Laser Sintering (SLS) Method and Development of Surface Roughness of Sintered Parts

ÖZBAY KISASÖZ B., ÖZER G., BULDUK M. E., TARAKÇI G., ÖTER Z. Ç., KOÇ E., et al.

Additive Manufacturing Conference Turkey-AMC TURKEY, İstanbul, Türkiye, 17 - 18 Ekim 2019, (Tam Metin Bildiri)

13. Melez İplikli Termoplastik Kompozitlerin Elyaf Sarma Yöntemiyle Üretim ve Karakterizasyonu

ÖZBAY KISASÖZ B., BEKEM A., ÜNAL A.

KOMPEGE III, Aydın, Türkiye, 5 - 07 Kasım 2015, (Tam Metin Bildiri)

Kitaplar 2

1. An Overview of the Quality Characteristics Challenges in Additive Manufacturing

Özbay Kısasöz B., Kısasöz A.

Handbook of Post-Processing in Additive Manufacturing, Singh Gurminder,Kumar Ranvijay,Sandhu Kamalpreet,Pei Eujin,Singh Sunpreet, Editör, CRC, New York , Florida, ss.181-192, 2023

2. Thermoplastic Polymers and Polymer Composites Used in Selective Laser Sintering (SLS) Method

ÖZBAY KISASÖZ B., KOÇ E.

Springer Handbook of Additive Manufacturing, Pei Eujin, Bernard Alain, Gu Dongdong, Klahn Christoph, Monzón Mario, Petersen Maren, Sun Tao, Editör, Springer, Cham, ss.585-595, 2023

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

122

H-İndeks (WoS)

Atıf (Scopus)

134

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler