Yayınlar & Eserler

Yayın Ağı
Makaleler 15
Tümü (15)
SCI-E, SSCI, AHCI (13)
SCI-E, SSCI, AHCI, ESCI (14)
ESCI (1)
Scopus (13)
TRDizin (1)
Diğer Yayınlar (1)

1. Production and characterization of AlCuMgMnZn high entropy alloy prepared by hot pressing

SEZER R., Erol M., BAYRAK Y., KISASÖZ A.
Materials Chemistry and Physics , cilt.351, 2026 (SCI-Expanded, Scopus) identifier

2. Tailoring the corrosion behavior of hot-pressed aluminium-CeO2 composites

ÖZBAY KISASÖZ B., Erol M., BAYRAK Y., KISASÖZ A.
Materials Letters , cilt.404, 2026 (SCI-Expanded, Scopus) identifier identifier

3. Hot-Pressing Process of 7075 Aluminum Alloy: Microstructure, Corrosion and Wear Properties

Cingöz U. C., CÖMERT Z. Y., ÖZBAY KISASÖZ B., BAYRAK Y., SEZER R., KISASÖZ A.
Journal of Materials Engineering and Performance , 2026 (SCI-Expanded, Scopus) identifier identifier

4. AJEAS 2025, 3(3): 154-174. http://dx.doi.org/10.70988/ajeas.1835402 154 Copyright: © 2025 by the authors. Licensee ÇAKÜ, Çankırı, Türkiye. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/) Alüminyum, Ferrosilisyum ve Kalsiyum Karbür ile Magnezyum Oksit ve Dolomitin Redüksiyonunda Magnezyum Üretiminin İncelenmesi

Bayrak Y., Ekerim A.
Alfa Mühendislik ve Uygulamalı Bilimler Dergisi , cilt.3, sa.3, ss.154-174, 2025 (Hakemli Dergi)

5. Unveiling the influence of CeO2 rare-earth oxide content on in-situ phase formation and properties of aluminium matrix composites

Erol M., BAYRAK Y., ÖZBAY KISASÖZ B., Yılmaz M. A., Özkan D., KISASÖZ A.
CERAMICS INTERNATIONAL , cilt.51, sa.28, ss.57819-57831, 2025 (SCI-Expanded, Scopus) identifier identifier

6. Synergetic effect of Y2O3 rare-earth oxide and in-situ phases on corrosion and wear properties of AlSi10Mg aluminium matrix composites produced by hot pressing

Cingöz U. C., Özbay Kısasöz B., BAYRAK Y., KISASÖZ A.
Ceramics International , cilt.51, sa.24, ss.43111-43124, 2025 (SCI-Expanded, Scopus) identifier identifier

7. Production and Characterization of B4C Content-Dependent Aluminum Matrix Composites Fabricated via Hot Pressing

BAYRAK Y., KISASÖZ A., SEZER R.
Journal of Materials Engineering and Performance , cilt.34, sa.2, ss.1607-1618, 2025 (SCI-Expanded, Scopus) identifier identifier

8. Influence of SiC content on the properties of Al/SiC composites produced by powder metallurgical route

BAYRAK Y.
Materialpruefung/Materials Testing , cilt.66, sa.12, ss.2011-2017, 2024 (SCI-Expanded, Scopus) identifier identifier

9. Characterization of Al/B4C–Y2O3 hybrid composites produced by vacuum hot pressing combined with Al2O3–Y2O3 interaction

BAYRAK Y., Özbay Kısasöz B., Tarakçı G., KISASÖZ A.
Ceramics International , cilt.50, sa.19, ss.36230-36242, 2024 (SCI-Expanded, Scopus) identifier identifier

10. Properties of Al/Y2O3 composites produced by Y2O3-Al2O3 interaction in powder metallurgy route

BAYRAK Y., KISASÖZ A., SEZER R.
Materials Letters , cilt.358, 2024 (SCI-Expanded, Scopus) identifier identifier

11. Removal of Cu(II) Ions from Aqueous Solutions by Ferrochrome Ash: Investigation of Mechanism and Kinetics

Uğurlu E., Birol B., Gencten M., Bayrak Y.
Water (Switzerland) , cilt.15, sa.6, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

12. The Effect of Holding Time After Sr Addition on Microstructural and Mechanical Properties of A356 Alloy

YAŞA S., KABİL A., BAYRAK Y., ÇİĞDEM M.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.26, sa.4, ss.634-637, 2020 (ESCI, TRDizin) Creative Commons License identifier

13. EFFECT OF ETCHING METHODS IN METALLOGRAPHIC STUDIES OF DUPLEX STAINLESS STEEL 2205

KISASÖZ A., KARAASLAN A., BAYRAK Y.
METAL SCIENCE AND HEAT TREATMENT , cilt.58, ss.704-706, 2017 (SCI-Expanded, Scopus) identifier identifier

14. Kinetic properties of co-reduced Co-B/graphene catalyst powder for hydrogen generation of sodium borohydride

Aydin M., Hasimoglu A., BAYRAK Y., Ozdemir O. K.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY , cilt.7, sa.1, 2015 (SCI-Expanded, Scopus) identifier identifier

15. Effect of Section Thickness on the Microstructure and Hardness of Ductile Cast Iron

Guzel E., Yuksel C., BAYRAK Y., Sen O., Ekerim A.
MATERIALS TESTING , cilt.56, sa.4, ss.285-288, 2014 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 7

1. Investigation Of The Heavy Metal Adsorption Properties Of Ferrochrome Flue Dust

Uğurlu E., BİROL B., GENÇTEN M., BAYRAK Y.
International Marmara Sciences Congress (Imascon Autumn) 2022 Proceedings Book, Kocaeli, Türkiye, 9 - 10 Aralık 2022, ss.38, (Özet Bildiri)

2. Dependency of Eutectic Spacing and Microhardness on Directions and Magnitudes of Uniform Electrical Field in the Al-Cu Eutectic Alloy

Basit S., Erol M., Bayrak Y., Maraşlı N.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1099-1102, (Tam Metin Bildiri)

3. Magnesium Metal Production with Magneterm Process by Using Aluminum Powder

Bayrak Y., Erol M., Basit S., Ekerim A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.183-186, (Tam Metin Bildiri)

4. Measurement of Thermal Conductivity Variation with Temperature for Solid Materials Using Longitudinal Heat Flow Method

Erol M., Basit S., Bayrak Y., Maraşlı N.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.276-279, (Tam Metin Bildiri)

5. Determination of Magnesium Production Parameters by Metalothermic Reduction Method

Bayrak Y., Ekerim A.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.1105-1112, (Tam Metin Bildiri) Creative Commons License

6. APPLICATION OF ECAP ON COMMERCIAL PURITY ALUMINUM

Evcimen N., BAYRAK Y., EKERİM A.
TMS 2010 Annual Meeting Supplemental Proceedings on Materials Processing and Properties, Washington, Amerika Birleşik Devletleri, 14 - 18 Şubat 2010, ss.83-88, (Tam Metin Bildiri) identifier identifier

7. Süper Plastik Şekil Değiştirmenin Alüminyum Malzeme Özelliklerine Etkisi

Bayrak Y., Sezer R., Ekerim A.
5. Uluslararası İleri Teknolojiler Sempozyumu (IATS'09), Karabük, Türkiye, 13 - 15 Mayıs 2009, ss.727-732, (Tam Metin Bildiri) Creative Commons License
Metrikler

Yayın

23

Yayın (WoS)

15

Yayın (Scopus)

14

Atıf (WoS)

102

H-İndeks (WoS)

6

Atıf (Scopus)

102

H-İndeks (Scopus)

6

Atıf (Scholar)

139

H-İndeks (Scholar)

6

Proje

3

Açık Erişim

21