Doç. Dr. Bekir ŞENER

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 13

1. Hydrodynamic optimization of a high-speed vessel by means of simulation-based design methodology: part 2—multi-objective optimization

Timurlek H., Sener B.

Journal of Marine Science and Technology , cilt.30, sa.1, ss.118-133, 2025 (SCI-Expanded)

2. Hydrodynamic optimization of a high-speed vessel by means of simulation-based design methodology

TİMURLEK H., ŞENER B.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT , cilt.236, sa.4, ss.891-903, 2022 (SCI-Expanded)

3. A real case study on the selection of suitable roll stabilizer type for motor yachts using hybrid fuzzy AHP and VIKOR methodology

Demirel H., Şener B., Yıldız B., Balın A.

OCEAN ENGINEERING , cilt.217, 2020 (SCI-Expanded)

4. A New TOPSIS Methodology Based on Single-Valued Neutrosophic Numbers for Selection of Suitable Roll Stabilizer Type for Motor Yachts

ŞENER B., BALIN A., YILDIZ B., Demirel H.

JOURNAL OF SHIP PRODUCTION AND DESIGN , cilt.36, sa.4, ss.250-258, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

5. Application of fuzzy VIKOR method for the evaluation and selection of a suitable tugboat

Balin A., ŞENER B., Demirel H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT , cilt.234, sa.2, ss.502-509, 2020 (SCI-Expanded)

6. A numerical and experimental study on the outrigger positioning of a trimaran hull in terms of resistance

Yıldız B., Şener B., Duman S., Datla R.

OCEAN ENGINEERING , cilt.198, 2020 (SCI-Expanded)

7. GenYacht: An interactive generative design system for computer-aided yacht hull design

Khan S., Günpınar E., ŞENER B.

OCEAN ENGINEERING , cilt.191, 2019 (SCI-Expanded)

8. AN INTEGRATED FUZZY MCDM MODEL FOR EVALUATION AND SELECTION OF A SUITABLE TUGBOAT

Balin A., ŞENER B., Demirel H.

INTERNATIONAL JOURNAL OF MARITIME ENGINEERING , cilt.161, 2019 (SCI-Expanded)

9. NUMERICAL AND EXPERIMENTAL CALCULATION OF ROLL AMPLITUDE EFFECT ON ROLL DAMPING

YILDIZ B., ŞENER B., YURTSEVEN A., Katayama T.

BRODOGRADNJA , cilt.70, sa.2, ss.1-15, 2019 (SCI-Expanded)

10. APPLYING A FUZZY-AHP FOR THE SELECTION OF A SUITABLE TUGBOAT BASED ON PROPULSION SYSTEM TYPE

Çakıroğlu G., Şener B., Balin A.

BRODOGRADNJA , cilt.69, ss.1-13, 2018 (SCI-Expanded)

11. Effect of mass housing settlement type on the comfortable open areas in terms of noise

Akdag N., Gedik G., Kiraz F., Şener B.

ENVIRONMENTAL MONITORING AND ASSESSMENT , cilt.189, sa.10, 2017 (SCI-Expanded)

12. EVALUATION OF MASS HOUSING SETTLEMENTS IN TERMS OF WIND AND NOISE CONTROL: ISTANBUL AND DIYARBAKIR AS A CASE

Zorer Gedik G., Yugruk Akdag N., Kiraz F., Şener B., Çaçan R.

JOURNAL OF ENVIRONMENTAL ENGINEERING AND LANDSCAPE MANAGEMENT , cilt.25, ss.389-401, 2017 (SCI-Expanded)

13. A parametric study on seakeeping assessment of fast ships in conceptual design stage

Ozum S., ŞENER B., YILMAZ H.

OCEAN ENGINEERING , cilt.38, sa.13, ss.1439-1447, 2011 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 16

1. Autonomous Network System with Specialized and Integrated Multi-Sensor Technology for Dynamic Monitoring of Marine Pollution (SMARTPOL)

Vardar N., Bayram B., Mishra A., Palade M., Şener B., Boujmil I., et al.

Journal of Eta Maritime Science , cilt.11, sa.3, ss.217-220, 2023 (ESCI)

2. Bir Yük Gemisi Formunun Parametrik Olarak Modellenmesi ve Çok Amaçlı Optimizasyonu

Timurlek H., Şener B.

European Journal of Science and Technology , cilt.1, sa.1, ss.105-113, 2020 (Hakemli Dergi)

3. A New Approach for Seakeeping Performance Assessment of Alternative Hull Forms in Optimization Process

ÖZÜM S., ŞENER B.

El-Cezeri Journal of Science and Engineering , cilt.7, sa.1, ss.236-248, 2020 (Scopus)

4. The Use of Additive Manufacturing in Maritime Industry

TAŞ Ş. O., ŞENER B.

International Journal of Engineering Trends and Technology (IJETT) , cilt.67, sa.6, ss.47-51, 2019 (Scopus)

5. Comparative Investigation of Crane Effect on Intact Stability Criteria for Ships

ÖZEN O., ŞENER B.

International Journal of Engineering Trends and Technology , cilt.67, sa.6, ss.13-17, 2019 (Scopus)

6. LCG Effects on Resistance, Lift and Trim Characteristics of R/V Athena Hull

Duman S., Şener B., Bal Ş.

International Journal of Small Craft Technology , cilt.160, ss.43-55, 2018 (Hakemli Dergi)

7. THE RENEWABLE ENERGY POTENTIAL OF TURKISH COASTS AND A CONCEPT DESIGN OF A NEAR SHORE SEA PLATFORM

ŞENER B., Aytac S.

JOURNAL OF THERMAL ENGINEERING , cilt.3, sa.3, ss.1211-1220, 2017 (ESCI) Sürdürülebilir Kalkınma

8. Parametric Design of a Surface Combatant For Simulation-Driven Design and Hydrodynamic Optimization

ŞENER B.

International Journal ofMechanical and Production Engineering , cilt.4, ss.125-129, 2016 (Hakemli Dergi)

9. UTILIZATION OF SHIPBOARD AS A HEAT EXCHANGER IN SHIP CENTRAL COOLING SYSTEM

YURTSEVEN A., ÜST Y., ŞENER B., KINACI Ö. K.

Sigma Journal of Engineering and Natural Sciences , sa.34, ss.1-2, 2016 (ESCI)

10. Bir Suüstü Savaş Gemisi Formunun Hesaplamalı Akışkanlar Dinamiği Yöntemleriyle Optimizasyonu

ŞENER B., YILMAZ T.

YTÜ Sigma Mühendislik ve Fen Bilimleri Dergisi , cilt.30, sa.3, ss.350-363, 2012 (Hakemli Dergi)

11. Kabotaj Hattı ve İç Sularımızdaki Yolcu ve Araç Taşımacılığı

ŞENER B., ÇELEBİ U. B.

Mersin Deniz Ticareti Dergisi , cilt.1, ss.59-62, 2012 (Hakemsiz Dergi)

12. Kara ve Deniz Bağlantılı Marmara Ambulans Sistemi MAS

AYDIN M., BAL Ş., KEPCELER T., GÜNDOĞDU O., ŞENER B., KINACI Ö. K., et al.

Gemi ve Deniz Teknolojisi , cilt.1, sa.190, ss.17-23, 2012 (Hakemli Dergi)

13. A concept ferry design for Istanbul seaway transport

ŞENER B.

Annual Scientific Journal of Ovidius University, Mechanical Engineering Series , cilt.12, sa.1, ss.25-28, 2010 (Hakemli Dergi)

14. Wind flow analysis around a chemical factory by using CFD

ŞENER B., YAVUZ HAKAN Ö., ZORER GEDİK G., YILMAZ T.

Annual Scientific Journal of Ovidius University , cilt.1, ss.120-123, 2010 (Hakemli Dergi)

15. Resistance prediction of a high speed craft by using CFD

SADIK Ö., ŞENER B., ÜNLÜGENÇOĞLU K.

Annual Scientific Journal of Ovidius University , cilt.1, ss.305-308, 2010 (Hakemli Dergi)

16. Türkiye Karasularında Petrol Sızıntısı Tehlikesine Karşın Petrol Temizleme Gemisi İhtiyacı ve Petrol Temizleme Gemisi Dizayn Gerekleri

TÜRKMEN S., ŞENER B., ARIKAN ÖZDEN Y.

Gemi ve Deniz Teknolojisi Dergisi , cilt.1, ss.7-12, 2010 (Hakemli Dergi) Sürdürülebilir Kalkınma

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 24

1. SMARTPOL AUTONOMOUS NETWORK SYSTEM WITH SPECIALIZED AND INTEGRATED MULTISENSOR TECHNOLOGY FOR DYNAMIC MONITORING OF MARINE POLLUTION

VARDAR N., BAYRAM B., ŞENER B., BAKIRMAN T., ARIKAN ÖZDEN Y., Genç N., et al.

JPI OCEANS MarTERA Project Meeting, Bruksel, Belçika, 22 Kasım 2023, (Özet Bildiri) Sürdürülebilir Kalkınma

2. Autonomous network system with specialized and integrated multi-sensor technology for dynamic monitoring of marine pollution (SMARTPOL)

VARDAR N., BAYRAM B., MISHRA A. K., PALADE M., ŞENER B., Georges o., et al.

International Symposium on Applied Geoinformatics, Girit, Yunanistan, 12 Ekim 2022, ss.8 Sürdürülebilir Kalkınma

3. ModiYacht: Intelligent CAD Tool for Parametric, Generative, Attributive and Interactive Modelling of Yacht Hull Forms

Khan S., GÜNPINAR E., DOĞAN K. M., ŞENER B., Kaklis P.

SNAME 14th International Marine Design Conference, Kanada, 26 Haziran 2022

4. Bir Yük Gemisi Formunun Parametrik Olarak Modellenmesi ve Çok Amaçlı Optimizasyonu

TİMURLEK H., ŞENER B.

ARACONF 2020 International Conference On Access To Recent Advances In Engineering And Digitalization, 5 - 07 Mart 2020

5. Bulbous bow optimization of KCS in terms of partially parametric modeling

ŞENER B., YILDIRIM M. E.

ICRIET 2018 International Conference on Recent Innovations in Engineering and Technology, Paris, Fransa, 12 - 13 Haziran 2018, cilt.1, ss.57-61

6. The Use of Virtual Reality in Yacht Design and Visualization

ŞENER B., BEŞLİ O.

INT-NAM 2018, 3rd International Naval Architecture and Maritime Symposium, 24 - 25 Nisan 2018, cilt.1, ss.267-276

7. A trim optimisation of an eights racing shell using towing tank and computational fluid dynamics methods

Türkmen S., ŞENER B., Yazıcı U. B., Atlar M.

INT-NAM 2018 3rd International Naval Architecture and Maritime Symposium, İstanbul, Türkiye, 24 Nisan 2018, cilt.1

8. Performance Prediction of a Planing Vessel Using Dynamic Overset Grid Method

DUMAN S., ŞENER B., BAL Ş.

11th SYMPOSIUM ON HIGH SPEED MARINE VEHICLES, Napoli, İtalya, 25 Ekim 2017, sa.10, ss.1-10, (Tam Metin Bildiri)

9. Hydrodynamic Optimization of a Ship Hull via Simulation-Driven Design Method

ŞENER B.

ICMAE 2017 International Conference on Mechanical and Aerospace Engineering, Roma, İtalya, 23 - 24 Haziran 2017, cilt.1, ss.25-29

10. Fully Parametric Hull Form Modeling for Further Systematic Investigations

ÖZÜM S., ŞENER B., YILMAZ H.

II. Maritime Conference on Innovation in Marine Technology and the Future of Maritime Transportation, İstanbul, Türkiye, 24 - 25 Ekim 2016, cilt.1, ss.1-10

11. Partially Parametric Modification of a Fast Patrol Boat Hull Form for Bow Optimization

YAZICI B. U., ŞENER B., ÖZDEN S.

II. Maritime Conference on Innovation in Marine Technology and the Future of Maritime Transportation, İstanbul, Türkiye, 24 - 25 Ekim 2016, cilt.1, ss.180-189

12. Determination of the Resistance of a Displacement Type Hull Form by means of Different CFD Solvers

ÇETİN E., ŞENER B., YILDIZ B.

II. Maritime Conference on Innovation in Marine Technology and the Future of Maritime Transportation, 24 - 25 Ekim 2016, cilt.1, ss.160-168

13. An Automated Methodology for Multi objective Optimization of Hull Forms

ŞENER B., YILMAZ T.

ISITES2015, 3RD INTERNATIONAL SYMPOSIUM ON INNOVATIVE TECHNOLOGIES IN ENGINEERING AND SCIENCE, Valencia, İspanya, 3 - 05 Haziran 2015, cilt.1, ss.1131-1140, (Tam Metin Bildiri)

14. Determination of Comfortable Outdoor Spaces in Mass-Housing Settlements in terms of Wind And Noise Control

AKDAĞ N., Kiraz F., ZORER GEDİK G., ŞENER B., Çaçan R.

II International Congress of Architecture Innovative Approaches in Architecture and Planning, Konya, Türkiye, 14 Kasım 2014, ss.19-30

15. Toplu Konut Yerleşmelerinde Rüzgar ve Gürültü Açısından Uygun Kullanım Alanlarının Belirlenmesi

ZORER GEDİK G., YÜĞRÜK AKDAĞ N., ÇAÇAN R., ŞENER B.

Yapı Fiziği Derneği, 01 Mart 2014, cilt.1, ss.299-308

16. Toplu Konut Yerleşimlerinin Rüzgar ve Gürültü Denetimi Açısından Değerlendirilmesi

YÜĞRÜK AKDAĞ N., ZORER GEDİK G., ÇAÇAN R., ŞENER B.

Türk Akustik Derneği, 01 Aralık 2013, cilt.1, ss.284

17. Toplu Konut Yerleşimlerinin Rüzgar ve Gürültü Denetimi Açısından Optimizasyonu

ZORER GEDİK G., AKDAĞ N., ŞENER B., Kiraz F., Çaçan R.

2. Ar-Ge Proje Pazarı, Enerji ve Çevre Teknolojileri, YTÜ, Proje Destek Ofisi, İstanbul, 01 Mayıs 2012

18. Design for energy efficiency: Simulation-driven design and hydrodynamic optimization for greener ships and EEDI compliance

BRENNER M., ŞENER B.

INT-NAM 2011, First International Symposium on Naval Architecture and Maritime, İstanbul, Türkiye, 24 Ekim 2011, cilt.1, sa.1, ss.125-135 Sürdürülebilir Kalkınma

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

154

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Açık Erişim