Published journal articles indexed by SCI, SSCI, and AHCI
An Approach to the Design of Ducted Propeller
SCIENTIA IRANICA TRANSACTION B-MECHANICAL ENGINEERING
, vol.17, no.5, pp.406-417, 2010 (SCI-Expanded)


Articles Published in Other Journals
Numerical Investigation of the Effects of Underwater Aft Cone Angle and Length-to-Beam Ratio on Hull Efficiency
Gemi ve Deniz Teknolojisi
, no.208, pp.71-88, 2017 (Peer-Reviewed Journal)
DENİZALTI KIÇ KONİKLİK AÇISININ VE BOY-GENİŞLİK ORANININ TEKNE VERİMİ ÜZERİNE ETKİLERİNİN SAYISAL OLARAK İNCELENMESİ
Gemi ve Deniz Teknolojisi
, no.208, pp.71-87, 2017 (Peer-Reviewed Journal)
Sabit Hızda Hareket Eden 2-B Kaynak Tekilliğinin Serbest Su Yüzeyine Etkilerinin İncelenmesi
Sigma Mühendislik ve Fen Bilimleri Dergisi
, vol.6, no.1, pp.149-156, 2015 (Non Peer-Reviewed Journal)
Effects of 2D Source Singularity Moving with Constant Speed on Free Surface
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI
, vol.6, pp.149-158, 2015 (Peer-Reviewed Journal)
Gaziantep-İstanbul Arası Yük Taşımacılığının Ekonomik Analizi
Sigma Mühendislik ve Fen Bilimleri Dergisi
, vol.30, no.3, pp.303-309, 2012 (Peer-Reviewed Journal)
A Numerical Investigation of Multiphase Flow and Oil Spill in Istanbul Strait
The Online Journal of Science and Technology
, vol.1, no.2, pp.8-15, 2011 (Peer-Reviewed Journal)
Gemi Sevk Sistemleri Tarihine Bakış
Gemi ve Deniz Teknolojisi
, no.186, pp.13-19, 2010 (Peer-Reviewed Journal)
Podlu Sevk Sistemlerinin Çevreye Olan Etkilerinin Sayısal Olarak İncelenmesi
Gemi ve Deniz Teknolojisi
, no.186, pp.4-12, 2010 (Peer-Reviewed Journal)
Numerical Analysis of Sheet Cavitation for two Dimensional Hydrofoils
Ovidius University Annual Scientific Journal
, vol.12, no.1, pp.7-14, 2010 (Peer-Reviewed Journal)
Refereed Congress / Symposium Publications in Proceedings
Numerical Investigation of Submarine Tail Form on the Hull Efficiency
Fifth International Symposium on Marine Propulsors, Helsinki, Finland, 12 June 2017, pp.1000-1010
Denizaltı Kıç Koniklik Açısının ve Boy Genişlik Oranının Tekne Verimi Üzerine Etkilerinin Sayısal olarak İncelenmesi
GMO SHIPMAR - 1st International Congress on Ship and Marine Technology, 08-09 December 2016. İstanbul Turkey, 8 - 09 December 2016
Optimal Geometry for 3D Supercavitating Hydrofoils
01 October 2014
4 Kanatlı Wageningen B Serisi Pervanelerin Dizaynı İçin Pratik Yaklaşımlar
Gemi İnşaatı ve Deniz Teknolojisi Teknik Kongresi 2012, İstanbul, Turkey, 13 December 2012, pp.143-158
İki Boyutlu Hidrofoiller Üzerindeki Kısmi Kavitasyonun Sayısal Olarak İncelenmesi
Gemi İnşaatı ve Deniz Teknolojisi Teknik Kongresi, İstanbul, Turkey, 13 December 2012, pp.159-174
Application of CFD in analysis of steady and unsteady turbulent flow pasta marine propeller
The 7th International Symposium on Turbulence, Heat and Mass Transfer, 01 September 2012
Practical Approaches for Design of 4 Bladed Wageningen B Series Propellers
1st International Symposium on Naval Architecture and Maritime (INT-NAM 2011) Proceedings, İstanbul, Turkey, 24 October 2011, vol.1, pp.441-454
Investigation of the Influence of Skew and Rake into the Propeller Performance and Cavitation
1st International Symposium on Naval Architecture and Maritime, 01 October 2011
Investigation of the Optimum Duct Geometry for A Passenger Ferry
9th Symposium on High Speed Marine Vehicles, 01 May 2011
A Numerical Investigation of Air Lubrication Effect on Ship Resistance
INTERNATIONAL CONFERENCE ON SHIP DRAG REDUCTION (SMOOTH-Ships), 20 - 21 May 2010, pp.1