Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Enhancing wear and corrosion resistance of TiO2–Al2O3 hybrid coatings by the development of TiO2–Al2O3 bilayer film coatings

Eraslan F. S., GECÜ R.
Ceramics International , cilt.50, sa.15, ss.26715-26726, 2024 (SCI-Expanded) identifier

Measuring depth-dependent residual stresses in gaseous nitrided steels using indentation method

Yayla A. F., GECÜ R., Solak N., Kazmanlı M. K., Ürgen M. K.
Materials Research Express , cilt.11, sa.8, 2024 (SCI-Expanded) identifier

Effects of Ti addition and wall thickness on microstructure, hardness, and wear properties of spheroidal graphite cast irons

Kaymak K., Tazegül Y., Keyvanklı A. B., GECÜ R.
Tribology International , cilt.195, 2024 (SCI-Expanded) identifier

Microstructural, hardness, and wear properties of Mg2Si-reinforced Al matrix in-situ composites produced by low superheat casting

Ozkan T., Tutuk I., ACAR S., GECÜ R., GÜLER K. A.
Materials Today Communications , cilt.38, 2024 (SCI-Expanded) identifier

Enhancing wear resistance of R220 rail steels by quenching and partitioning (Q&P) treatment

GECÜ R.
Materials Letters , cilt.354, 2024 (SCI-Expanded) identifier

Microstructural, tribological, and corrosion behavior of B4C-added TiO2 coatings applied on 316 L stainless steel via sol-gel method

Eraslan F. S., BİROL B., GECÜ R.
Ceramics International , 2024 (SCI-Expanded) identifier

Wear and corrosion behavior of vanadium-alloyed nodular cast irons fabricated by sand-casting

TÜRÜ İ. C., GECÜ R.
Wear , cilt.534-535, 2023 (SCI-Expanded) identifier

Chemical composition optimization of Al2O3-TiO2 composite coatings for enhanced wear and corrosion resistance

Eraslan F. S., Gecü R.
Surface and Coatings Technology , cilt.474, 2023 (SCI-Expanded) identifier

Influence of layer number and sintering temperature on microstructural, tribological, and corrosion behavior of Al2O3–TiO2 multilayer coatings

Eraslan F. S., TÜRÜ İ. C., ÖZCAN M., BİROL B., GECÜ R.
Ceramics International , cilt.49, sa.20, ss.33226-33235, 2023 (SCI-Expanded) identifier

Influence of vanadium content and cooling rate on the characteristics of vanadium-alloyed spheroidal graphite cast irons

Kandemir A. S., GECÜ R.
Journal of Alloys and Compounds , cilt.934, 2023 (SCI-Expanded) identifier

Combined effects of cryogenic treatment and tempering on microstructural and tribological features of AISI H13 steel

GECÜ R.
MATERIALS CHEMISTRY AND PHYSICS , cilt.292, 2022 (SCI-Expanded) identifier identifier

Improving wear and corrosion protection of AISI 304 stainless steel by Al2O3-TiO2 hybrid coating via sol-gel process

Gecü R., Birol B., Özcan M.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING , cilt.100, sa.6, ss.324-332, 2022 (SCI-Expanded) identifier identifier

Microstructure, Mechanical, and Wear Properties of Al-Alloyed Austempered Ductile Irons

GECÜ R.
TRIBOLOGY TRANSACTIONS , cilt.65, sa.5, ss.952-962, 2022 (SCI-Expanded) identifier identifier

Volume fraction effect of stainless steel on microstructure, interface, corrosion and wear behavior of stainless steel / aluminum bimetal composites

GECÜ R., KARAASLAN A.
Materials Chemistry and Physics , cilt.284, 2022 (SCI-Expanded) identifier identifier

Surface characteristics of plasma electrolytic oxidation coatings on Cp-Ti and hot-dip aluminised Cp-Ti

Celtik C., Yurekturk Y., GECÜ R., Kaboglu C., Muhaffel F.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING , cilt.100, ss.159-165, 2022 (SCI-Expanded) identifier identifier

Microstructural, mechanical and tribological characterization of aluminum-alloyed ductile cast irons based on aluminum content

Sandikoglu A., Gecü R.
Journal of Alloys and Compounds , cilt.879, 2021 (SCI-Expanded) identifier identifier

Microstructure, wear and corrosion characteristics of multiple-reinforced (SiC-B4C-Al2O3) Al matrix composites produced by liquid metal infiltration

Öztürk K., Gecü R., Karaaslan A.
CERAMICS INTERNATIONAL , cilt.47, sa.13, ss.18274-18285, 2021 (SCI-Expanded) identifier identifier

Casting temperature dependent wear and corrosion behavior of 304 stainless steel reinforced A356 aluminium matrix bimetal composites fabricated by vacuum-assisted melt infiltration casting

Gecü R., Karaaslan A.
WEAR , cilt.446, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Sliding Wear of the Ti-Reinforced Al Matrix Bi-metal Composite: A Potential Replacement to Conventional SiC-Reinforced Composites for Automotive Application

GECÜ R., KARAASLAN A.
INTERNATIONAL JOURNAL OF METALCASTING , cilt.13, sa.3, ss.641-652, 2019 (SCI-Expanded) identifier identifier

Improving wear resistance of 304 stainless steel reinforced AA7075 aluminum matrix composite by micro-arc oxidation

GECÜ R., Yurekturk Y., Tekoglu E., Muhaffel F., KARAASLAN A.
SURFACE & COATINGS TECHNOLOGY , cilt.368, ss.15-24, 2019 (SCI-Expanded) identifier identifier

The effect of retrogression and re-aging treatment on mechanical and tribological features of AA7075 aluminium alloyEinfluss der Retrogressions- und Reaging-Behandlung auf die mechanischen und tribologischen Eigenschaften der Aluminiumlegierung AA7075

Ozer G., GECÜ R., KARAASLAN A.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.50, sa.6, ss.761-768, 2019 (SCI-Expanded) identifier identifier

A Comparative Study on Titanium-Reinforced Aluminium Matrix Composites Produced by Melt Infiltration Casting and Squeeze Infiltration

GECÜ R., KARAASLAN A.
INTERNATIONAL JOURNAL OF METALCASTING , cilt.13, sa.2, ss.311-319, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Microstructural and Tribological Characterization of Stainless Steel-Reinforced Aluminum Matrix Bimetal Composites Produced at Various Mold Burnout Temperatures

GECÜ R., KARAASLAN A.
TRIBOLOGY TRANSACTIONS , cilt.62, sa.2, ss.249-261, 2019 (SCI-Expanded) identifier identifier

Volume Fraction Dependent Wear Behavior of Titanium-Reinforced Aluminum Matrix Composites Manufactured by Melt Infiltration Casting

GECÜ R., KARAASLAN A.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME , cilt.141, sa.2, 2019 (SCI-Expanded) identifier identifier

Preform-Based Production of Al2O3-Reinforced Aluminium Matrix Composites by Using Various Modification Techniques

Öztürk K., Gecü R., Karaaslan A.
Metals and Materials International , 2019 (SCI-Expanded) identifier identifier

A Study on Al/Cu Bimetal Production by Lost Foam Casting

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.55, sa.11, ss.728-740, 2018 (SCI-Expanded) identifier identifier

Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by thixoforging combined with low superheat casting

GECÜ R., ACAR S., KISASÖZ A., ALTUG GULER K. A., KARAASLAN A.
Transactions of Nonferrous Metals Society of China (English Edition) , cilt.28, sa.3, ss.385-392, 2018 (SCI-Expanded) identifier identifier

Relationship Between Nanoindentation and Wear Properties of Stainless Steel-Reinforced Aluminium Matrix Composite

GECÜ R., KARAASLAN A.
TRIBOLOGY LETTERS , cilt.65, sa.4, 2017 (SCI-Expanded) identifier identifier

Influence of preform preheating on dry sliding wear behavior of 304 stainless steel reinforced A356 aluminum matrix composite produced by melt infiltration casting

GECÜ R., ATAPEK Ş. H., KARAASLAN A.
TRIBOLOGY INTERNATIONAL , cilt.115, ss.608-618, 2017 (SCI-Expanded) identifier identifier

Investigation of spherisation in microstructures of aluminium casting alloys for thixoforging process

GÜLER K. A., GECÜ R., KISASÖZ A., KARAASLAN A.
RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.58, sa.5, ss.489-494, 2017 (SCI-Expanded) identifier identifier

A Comparative Study on the Microstructure Evaluation of Thixoforged A356 and A380 Aluminium Alloys

GÜLER K. A., GECÜ R., KISASÖZ A., KARAASLAN A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.54, sa.3, ss.163-177, 2017 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Determination of Temperature Gradient in TIG Welding of Duplex Stainless Steel

KISASÖZ A., GECÜ R., KARAASLAN A.
El-Cezerî Journal of Science and Engineering , cilt.4, ss.593-597, 2017 (Scopus)

Bimetal ve Geleneksel Olarak Üretilen Alüminyum Esaslı Metal-Metal Kompozitlerin Mekanik Özellikleri

Gecü R.
Metalurji , sa.180, ss.26-30, 2016 (Hakemsiz Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Investigation And Characterızatıon Of Duplex Staınless Steel Productıon By Mechanıcal Alloyıng Method

Örücü S., Birol B., Gecü R.
International Marmara Sciences Congress (Imascon Autumn) 2022, Kocaeli, Türkiye, 9 - 10 Aralık 2022, ss.25 Creative Commons License

Influence of Heat Treatment of 1.4462 and 1.4501 Duplex Stainless Steels on Microstructure and Wear Resistance

YALÇINER G., GECÜ R., KISASÖZ A., KARAASLAN A.
20th International Metallurgy and Materials Congress, İstanbul, Türkiye, 10 - 12 Haziran 2021, ss.316

Prevention of Hot Crack Formation in 304 Stainless Steel Reinforced AA7075 Aluminium Matrix Bimetal Composites

Gecü R., Karaaslan A.
9th International Aluminium Symposium, İstanbul, Türkiye, 10 - 11 Ekim 2019, ss.34-38 Creative Commons License

A Study on the Effects of Solution Heat Treatment Time on Eutectic Silicon Morphology for A380 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.304-306

Sliding Wear Characteristics of AISI 2205 Duplex Stainless Steel Cooled in Various Environments after Solution Treatment

GECÜ R., KISASÖZ A., KARAASLAN A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.837-840

The impact of volume fraction of commercially pure titanium reinforcement on aluminium matrix bimetal composite properties

GENÇER K., GECÜ R., KARAASLAN A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.148-151

TRIBOLOGICAL CHARACTERIZATION OF 304 STAINLESS STEEL REINFORCED AA7075 ALUMINIUM MATRIX COMPOSITE PRODUCED BY MELT INFILTRATION CASTING

GECÜ R., KARAASLAN A.
2nd International Conference on Tribology, İstanbul, Türkiye, 18 Nisan 2018, ss.36-41

Investigation of the Effects of Solution Heat Treatmeant Time on the Eutectic Silicon for A356 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.268-272

Dry Sliding Wear Properties of AA7075 Aluminium Matrix Hybrid Composites

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.295-300

The Effect of Preform Preheating on Microstructural and Mechanical Features of 80% CP-Ti Reinforced A356 Matrix Composite

GECÜ R., KARAASLAN A.
International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.163-169

Aging of A356 Aluminum Billets Produced by Semi-Solid Metal Processing

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.
3rd International Iron & Steel Symposium, Karabük, Türkiye, 03 Nisan 2017, ss.267-270

Production of CP-Ti Reinforced A356 Aluminum Composite by Vacuum-Assisted Investment Casting

GECÜ R., KARAASLAN A.
International Conference on Engineering Technology and Innovation, Saraybosna, Bosna-Hersek, 22 Mart 2017, ss.210-214

Microstructural Evaluation of T6-Treated A380 Alloy Manufactured by Semi-Solid Metal Casting

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.
International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.284-288

Manufacturing and Aging of 7075 Based Metal-Metal Composites by Using Sawdusts as Reinforcements

GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.114-117

An Investigation of the Effect of Solution Heat Treatment on 475 °C Embrittlement in 1.4462 Duplex Stainless Steels

GECÜ R., KISASÖZ A., KARAASLAN A.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.501-503

The Effect of Intermetallic Phases on Corrosion Behaviour of Duplex Stainless Steels

ZORBA A. P., ÖZYILMAZ A. Ö., GECÜ R., KISASÖZ A., KARAASLAN A.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.836-839

Metrikler

Yayın

50

Atıf (WoS)

200

H-İndeks (WoS)

9

Atıf (Scopus)

280

H-İndeks (Scopus)

10

Proje

8

Tez Danışmanlığı

1

Açık Erişim

44
BM Sürdürülebilir Kalkınma Amaçları