Prof.Dr. Kerem Altuğ G&#220;LER

INTERNATIONAL JOURNAL OF METALCASTING , cilt.15, sa.1, ss.88-97, 2021 (SCI-Expanded)

Producing non-dendritic A356 and A380 feedstocks: Evaluation of the effects of cooling slope casting parameters

Kutbay I., GÜLER K. A., ÇİĞDEM M.

MATERIALS TESTING , cilt.62, sa.11, ss.1147-1152, 2020 (SCI-Expanded)

Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC)

Özer G., Özbay B., Öter Z. Ç., Tarakçı G., Yılmaz M. S., Bulduk M. E., et al.

International Journal Of Cast Metals Research , cilt.25, sa.3, ss.146-152, 2020 (SCI-Expanded)

Evaluation of the reheating behavior of the cooling slope cast A356 and A380 aluminum alloys

Acar S., Açıcı N., Güler K. A.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.12, 2019 (SCI-Expanded)

Cooling slope casting of AA7075 alloy combined with reheating and thixoforging

Güler K. A., Kısasöz A., Ozer G., Karaaslan A.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.29, ss.2237-2244, 2019 (SCI-Expanded)

A Study on Al/Cu Bimetal Production by Lost Foam Casting

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.55, sa.11, ss.728-740, 2018 (SCI-Expanded)

Investigation of carbon contamination in lost foam castings of low carbon steel

KILIÇ Ö., ACAR S., KISASÖZ A., GÜLER K. A.

CHINA FOUNDRY , cilt.15, sa.5, ss.384-389, 2018 (SCI-Expanded)

Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by thixoforging combined with low superheat casting

GECÜ R., ACAR S., KISASÖZ A., ALTUG GULER K. A., KARAASLAN A.

Transactions of Nonferrous Metals Society of China (English Edition) , cilt.28, sa.3, ss.385-392, 2018 (SCI-Expanded)

The development of an expansive type special cement bonded investment powder for castings of non ferrous metals and alloys

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH , cilt.31, sa.4, ss.237-248, 2018 (SCI-Expanded)

Characterization of Mechanical Properties and Corrosion Behaviours of Mn and Al Bronze Castings

Turker M., ACAR S., CÖMERT Z. Y., KISASÖZ A., GÜLER K. A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.55, sa.1, ss.5-18, 2018 (SCI-Expanded)

Investigation of spherisation in microstructures of aluminium casting alloys for thixoforging process

GÜLER K. A., GECÜ R., KISASÖZ A., KARAASLAN A.

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.58, sa.5, ss.489-494, 2017 (SCI-Expanded)

Influence of Orbital Shaking on Microstructure and Mechanical Properties of A380 Aluminium Alloy Produced by Lost Foam Casting

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.58, sa.3, ss.238-243, 2017 (SCI-Expanded)

A Comparative Study on the Microstructure Evaluation of Thixoforged A356 and A380 Aluminium Alloys

GÜLER K. A., GECÜ R., KISASÖZ A., KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.54, sa.3, ss.163-177, 2017 (SCI-Expanded)

Dry Sliding Wear Behavior of Cast A7075 and A7075/SAF 2205 Composite Material

KARAASLAN A., KISASÖZ A., ATAPEK Ş. H., GÜLER K. A.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.35, sa.5, ss.487-492, 2016 (SCI-Expanded)

Experimental Research on Properties of Naval Brass Castings

Turker M., CÖMERT Z. Y., KISASÖZ A., GÜLER K. A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.53, sa.1, ss.24-35, 2016 (SCI-Expanded)

Solid mold investment casting - A replication process for open-cell foam metal production

GÜLER K. A.

MATERIALS TESTING , cilt.57, sa.9, ss.795-798, 2015 (SCI-Expanded)

A study of expanded polyethylene (EPE) pattern application in aluminium lost foam casting

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.56, sa.2, ss.171-176, 2015 (SCI-Expanded)

Wear properties of squeeze cast in situ Mg2Si-A380 alloy

LUŞ H. M., Özer G., Güler K. A., Erzi E., Dışpınar D.

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH , cilt.28, sa.1, ss.59-64, 2015 (SCI-Expanded)

Investigation of Al/Steel Bimetal Composite Fabrication by Vacuum Assisted Solid Mould Investment Casting

ACTA PHYSICA POLONICA A , cilt.126, sa.6, ss.1327-1330, 2014 (SCI-Expanded)

Investigation of lost foam casted aluminum bimetal microstructures

Materialpruefung/Materials Testing , cilt.56, sa.9, ss.737-740, 2014 (SCI-Expanded)

Effects of pattern coating and vacuum assistance on porosity of aluminium lost foam castings

Russian Journal of Non-Ferrous Metals , cilt.55, sa.5, ss.424-428, 2014 (SCI-Expanded)

Fabrication of Al/Mg bimetal compound casting by lost foam technique and liquid-solid process

Guler K. A., KISASÖZ A., KARAASLAN A.

Materialpruefung/Materials Testing , cilt.56, sa.9, ss.700-702, 2014 (SCI-Expanded)

Investigation of surface roughness of aluminium solid mould investment castings

Guler K. A.

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.54, sa.6, ss.480-483, 2013 (SCI-Expanded)

The fabrication and characterization of Al/SiC-MMC castings produced by vacuum assisted solidmould investment casting process

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.54, sa.4, ss.320-324, 2013 (SCI-Expanded)

Drilling Template Used to Produce Cellular EPS Patterns for the Lost Foam Casting Process

GÜLER K. A., Uster A., ÇİĞDEM M.

MATERIALS TESTING , cilt.55, sa.1, ss.60-63, 2013 (SCI-Expanded)

The Effects of Process Parameters on the Recycling Efficiency of Used Aluminium Beverage Cans (UBCs)

Ozer G., YUKSEL C., COMERT Z. Y., GULER K. A.

MATERIALS TESTING , cilt.55, sa.5, ss.396-400, 2013 (SCI-Expanded) Sürdürülebilir Kalkınma

Effects of Wax Coating on the Surface Quality of EPS Patterns for Solid Mould Investment Casting

GÜLER K. A.

MATERIALS TESTING , cilt.55, sa.3, ss.193-196, 2013 (SCI-Expanded)

Infiltration of A6063 aluminium alloy into SiC-B4C hybrid preforms using vacuum assisted block mould investment casting technique

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.22, sa.7, ss.1563-1567, 2012 (SCI-Expanded)

Effects of Squeeze Pressure on Microstructure, Porosity and Hardness of an In-Situ Mg2Si/Al-Si-Cu Composite

Ozer G., Guler K. A., LUŞ H. M.

MATERIALS TESTING , cilt.54, sa.1, ss.26-29, 2012 (SCI-Expanded)

The Evaluation of Waste Papers for the Ceramic industry

SELTE A., GÜLER K. A., Marsoglu M.

MATERIALS TESTING , cilt.54, sa.2, ss.126-129, 2012 (SCI-Expanded)

Mechanical properties of A6063/ SiC composites produced using the lost foam casting process

Güler K. A., Kisasoz A., Yuksel C., Karaaslan A.

Materialpruefung/Materials Testing , cilt.54, sa.3, ss.189-192, 2012 (SCI-Expanded)

A novel method for Al/SiC composite fabrication: Lost foam casting

Kisasoz A., Güler K. A., Karaaslan A.

International Journal of Materials Research , cilt.102, sa.3, ss.304-308, 2011 (SCI-Expanded)

Fabrication and characterization of SiC preforms for metal matrix composites

Materialpruefung/Materials Testing , cilt.53, ss.54-57, 2011 (SCI-Expanded)

Production of Open Cell Aluminium Metal Foam with Lost Foam Technique

GÜLER K. A., Taslicukur Z., Ozer G.

MATERIALS TESTING , cilt.53, sa.5, ss.295-297, 2011 (SCI-Expanded)

Surface Quality and Dimensional Accuracy of Gypsum Bonded Investment Flask Casting Moulds

GÜLER K. A., ÇİĞDEM M.

MATERIALS TESTING , cilt.53, sa.9, ss.551-555, 2011 (SCI-Expanded)

Cellular Aluminum Foam Metal Production With Space Holder Particles

GÜLER K. A., Taslicukur Z.

MATERIALPRUFUNG , cilt.52, sa.6, ss.379-382, 2010 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Effect of Waste Titanium Chips Addition Into the Aluminum Alloys on Their Microstructure

Ozer G., ACAR S., Kisasoz A., GÜLER K. A.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.34, sa.4, ss.1096-1105, 2021 (ESCI)

Aluminium Bimetal Structure Production by Lost Foam Casting with Liquid-Liquid Process

Kısasöz A., Guler K. A., Karaaslan A.

Machines, Technologies, Materials , cilt.8, sa.10, ss.43-46, 2014 (Hakemli Dergi)

Fabrication of Al-Steel Composites by Vacuum Assisted Block Mould Investment Casting Technique

Güler K. A., Kısasöz A., Karaaslan A.

Machines Technologies Materials , cilt.8, sa.10, ss.47-49, 2014 (Hakemli Dergi)

Metal Matrisli Kompozitlerin Vakum İnfiltrasyonla Dereceli Hassas Döküm Kalıplarında Üretimi

Güler K. A., KARAASLAN A.

Metalurji , cilt.170, ss.34-38, 2014 (Hakemsiz Dergi)

Expanded Polystyrene (EPS) Pattern Application in Investment Casting and Chemical Removing

GÜLER K. A., Taslicukur Z., Ozer G.

Materialy Ceramiczne/Ceramic Materials , cilt.63, sa.1, ss.138-142, 2011 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Effect of Dynamic Stimuli on Artificial Aging in Casting and Solidification of 2014 Al Alloy

Dönmez Y. T., ACAR S., GÜLER K. A.

2. ULUSLARARASI MÜHENDİSLİK VE FEN BİLİMLERİ KONGRESİ, İstanbul, Türkiye, 16 - 17 Aralık 2023

Corrosion Behaviour of A356/TiB2 In-Situ Composites

Kısasöz A., Kısasöz A., Güler K. A.

10. Uluslararası Alüminyum Sempozyumu, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.432-434

Aluminium Matrix In-Situ Ex-Situ Hybrid Composite Production By Vacuum Infiltration Method

Birsen D., Tütük İ., Öztürk K., Acar S., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.471-474

Effect of Aging Conditions of AA6063 and AA6061 Alloys on Corrosion Behavior

Tütük İ., Doğan M., Acar S., Öztürk K., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.294-298

Investigation of Pouring Temperature for Direct Water-Cooled Aluminum Lost Foam Castings

Tütük İ., Acar S., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.364-367

Production of Aluminium Matrix in-Situ Composites Using Low Superheat Casting Method

Özkan T., Tütük İ., Acar S., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.467-470

İkiz Merdaneli Sürekli Döküm Tekniğiyle Üretilmiş 3005 Alüminyum Alaşımında Termomekanik Proseslerin Derin Çekilebilme Kabiliyetine Etkisi

Özçetin Y., Kocaoğlu Ç., Ulus A., İnel C., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.266-273

The effect of orbital shaking on the microstructure of lost foam cast A356 aluminum alloy

Kılıç Ö., Acar S., Güler K. A.

9th International Aluminium Symposium, İstanbul, Türkiye, 10 - 11 Ekim 2019, ss.256-260

A Study on the Effects of Solution Heat Treatment Time on Eutectic Silicon Morphology for A380 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.304-306

Effects of Reheating Time on Hardness and Microstructural Properties of Thixoforged AA2014 Alloy Manufactured via Cooling Slope Casting

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.269-271

Dry Sliding Wear Properties of AA7075 Aluminium Matrix Hybrid Composites

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.

2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.295-300

Investigation of the Effects of Solution Heat Treatmeant Time on the Eutectic Silicon for A356 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.268-272

Cooling Slope Casting and Thixoforging of A319 Alloy

Kısasöz A. A., KISASÖZ A., GÜLER K. A.

2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.57-62

A356 Alaşımının Eğimli Soğutucu İle Dökümü ve Yarı-Katı Dövme İşlemi

Açıcı N., ACAR S., GÜLER K. A.

8. Alüminyum Sempozyumu, İstanbul, Türkiye, 05 Ekim 2017, ss.294-298

A356 Matrisli TiB2 Takviyeli İn-Situ Kompozit Üretimi

8. Alüminyum Sempozyumu, İstanbul, Türkiye, 05 Ekim 2017, ss.290-293

Aging of A356 Aluminum Billets Produced by Semi-Solid Metal Processing

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.

3rd International Iron & Steel Symposium, Karabük, Türkiye, 03 Nisan 2017, ss.267-270

Microstructural Evaluation of T6-Treated A380 Alloy Manufactured by Semi-Solid Metal Casting

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.

International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.284-288

Corrosion, Mechanical and Microstructural Characteristics of Modified Navy G Bronze Casts

TURKER M., ACAR S., CÖMERT Z. Y., KISASÖZ A., GÜLER K. A.

International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.303-305

Microstructural Evaluation of Thixoforged A380 Alloy Billets Produced by Low Superheat Casting Process

GÜLER K. A., KISASÖZ A., KARAASLAN A., ÖZER G.

18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.659-662

Manufacturing and Aging of 7075 Based Metal-Metal Composites by Using Sawdusts as Reinforcements

GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.114-117

Lost Foam Casting with EPS Patterns in Different Densities

KARA S., GÜLER K. A., KISASÖZ A.

International Conference on Advances in Mechanical Engineering (ICAME'15), İstanbul, Türkiye, 13 Mayıs 2015, ss.1133-1136

In Situ Composite of (Mg2Si)/Al Fabricated by Squeeze Casting

Ozer G., GÜLER K. A.

TMS 2012, 141st Annual Meeting & Exhibition, 01 Mart 2012

Casting Quality of Gypsum Bonded Block Investment Casting Moulds

GÜLER K. A., ÇİĞDEM M.

14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.349-354

Vakum Destekli Dereceli Hassas Dökümde Alçı Bağlı Kalıp Malzemelerinin Döküm Kalitesi

GÜLER K. A., Çiğdem M.

4. Döküm ve Çevre Sempozyumu (IFES 2011), 01 Kasım 2011

Açık Hücreli Hücresel Metal Üretimi İçin Yeni Bir Yaklaşım Olarak Dolu Kalıba Döküm Tekniğinin Uygulanması

GÜLER K. A., Üster A., Çiğdem M.

4. Döküm ve Çevre Sempozyumu (IFES 2011), 01 Kasım 2011

Production of Al2O3-Al Composites Using Vacuum Assted Block Mold Investment Casting

8th International PhD foundry Conference, Czech Republic, Brno, Çek Cumhuriyeti, 07 Haziran 2011, ss.18-20

The effect of different bonded investment powders on surface quality and dimensional accuracy of investment castings

GÜLER K. A., Cigdem M.

8th International PhD Foundry Conference, 01 Haziran 2011

Aluminum Matrix Composite Fabrication by Infiltration of SiC Preforms Using Squeeze Casting Technique

Özer G., Kısasöz A., Güler K. A.

8th International PhD Foundry Conference, Czech Republic, 01 Mayıs 2011, cilt.1, ss.1-9

Lost foam casting technique applications for Al/SiC composite production