Removal of acetic acid from aqueous post-fermentation streams and fermented beverages using membrane contactors

KAYA E., Hasanoglu A.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, cilt.97, sa.8, ss.2218-2230, 2022 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 97 Sayı: 8
  • Basım Tarihi: 2022
  • Doi Numarası: 10.1002/jctb.7100
  • Dergi Adı: JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Applied Science & Technology Source, Aqualine, Aquatic Science & Fisheries Abstracts (ASFA), BIOSIS, Biotechnology Research Abstracts, CAB Abstracts, Chemical Abstracts Core, Chimica, Communication Abstracts, Compendex, Computer & Applied Sciences, EMBASE, Food Science & Technology Abstracts, INSPEC, Metadex, Pollution Abstracts, Veterinary Science Database, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.2218-2230
  • Anahtar Kelimeler: volatile acid removal, acetic acid, membrane contactor, fermentation product, VOLATILE FATTY-ACIDS, HOLLOW-FIBER MEMBRANE, AMMONIA REMOVAL, RECOVERY, WATER, EXTRACTION, SEPARATION, DEALCOHOLIZATION, WINE
  • Yıldız Teknik Üniversitesi Adresli: Evet

Özet

BACKGROUND The removal of volatile organic acids from aqueous post-fermentation wastewater streams and spoiled fermented liquid food was investigated using hollow-fiber membrane contactors. Acetic acid, being the most common volatile acid in post-fermentation products, was used to prepare acidic feed solutions. 1200-4000 ppm of aqueous acetic acid solutions with and without ethanol were prepared to assess the acid removal. Aqueous acetic acid solutions were used as model wastewater, while ethanol was included in the feed solutions to simulate the fermented beverages. Furthermore, the experiments were carried out using real spoiled wine to remove the excess acid. The feed solution was circulated through the shell side of the membrane contactor, while a reactive stripping solution of NaOH was circulated on the lumen side. Thus the acetic acid was transferred to the stripping solution by chemical absorption. RESULTS The effect of several process parameters including feed and stripping solution concentrations, temperature and solution flow rates on acid removal rate was investigated. Temperature had the most important effect on mass transfer. Experiments showed that acetic acid can be removed from aqueous solutions and recovered in the stripping phase efficiently. Up to 86% of the acetic acid could be removed from the feed solution. CONCLUSION This process is found to be effective for volatile organic acid removal from both industrial aqueous post-fermentation waste streams and spoiled fermented liquid food. The theoretical model developed for the acetic acid transfer allows a flexible and predictable design of the system for further scale-up studies. (c) 2022 Society of Chemical Industry (SCI).