Asst. Prof. Serhat ACAR

Publication Network

Articles 18

1. The Use of an Expendable Mold Casting Technique for Semi-solid Formable Feedstock Production: The Combination of Lost Foam and Cooling Slope Casting

Tütük İ., ACAR S., GÜLER K. A.

International Journal of Metalcasting , 2025 (SCI-Expanded, Scopus)

2. Microstructure evolution of AlSi10Mg alloy in RAP process

Tütük İ., Acar S., Özer G., Güler K. A.

MATERIALPRUEFUNG/MATERIALS TESTING , vol.66, no.11, pp.1820-1828, 2024 (SCI-Expanded, Scopus)

3. Impacts of T6 heat treatment on the microstructural, mechanical, and corrosion properties of thixoformed AA7075 alloy produced by cooling slope casting

Acar S., Güler K. A.

MATERIALS RESEARCH EXPRESS , vol.11, no.10, pp.1-13, 2024 (SCI-Expanded, Scopus)

4. Microstructural, hardness, and wear properties of Mg2Si-reinforced Al matrix in-situ composites produced by low superheat casting

Ozkan T., Tutuk I., ACAR S., GECÜ R., GÜLER K. A.

Materials Today Communications , vol.38, 2024 (SCI-Expanded, Scopus)

5. Electrochemical corrosion behaviour of UNS S32205 duplex stainless steel dependent on sigma phase precipitation

Kısasöz B., Tütük İ., ACAR S., KISASÖZ A.

Materialpruefung/Materials Testing , 2024 (SCI-Expanded, Scopus)

6. Microstructure and wear characteristics of hybrid reinforced (ex-situ SiC–in-situ Mg2Si) Al matrix composites produced by vacuum infiltration method

Birsen D., Tütük İ., Acar S., Karabeyoğlu S. S., Özer G., Güler K. A.

MATERIALS CHEMISTRY AND PHYSICS , vol.302, pp.127743, 2023 (SCI-Expanded, Scopus)

7. The Application of the Direct Water Cooling Process on the Lost-Foam Casting Technique to Improve Microstructural and Mechanical Properties of A356 Alloy

Tutuk I., ACAR S., GÜLER K. A.

International Journal of Metalcasting , vol.17, no.3, pp.2324-2337, 2023 (SCI-Expanded, Scopus)

8. A THOROUGH STUDY ON THIXOFORMABILITY OF THE COOLING SLOPE CAST 7075 FEEDSTOCKS: STEP-BY-STEP OPTIMIZATION OF THE FEEDSTOCK PRODUCTION AND THIXOFORMING PROCESSES

Acar S., Güler K. A.

INTERNATIONAL JOURNAL OF METALCASTING , vol.17, no.2, pp.717-739, 2023 (SCI-Expanded, Scopus)

9. A Preliminary Study Upon the Applicability of the Direct Water Cooling with the Lost Foam Casting Process

ACAR S., GÜLER K. A.

INTERNATIONAL JOURNAL OF METALCASTING , vol.15, no.1, pp.88-97, 2021 (SCI-Expanded, Scopus)

10. Effect of Waste Titanium Chips Addition Into the Aluminum Alloys on Their Microstructure

Ozer G., ACAR S., Kisasoz A., GÜLER K. A.

GAZI UNIVERSITY JOURNAL OF SCIENCE , vol.34, no.4, pp.1096-1105, 2021 (ESCI, Scopus, TRDizin)

11. Producing non-dendritic A356 and A380 feedstocks: Evaluation of the effects of cooling slope casting parameters

ACAR S., GÜLER K. A.

MATERIALS TESTING , vol.62, no.11, pp.1147-1152, 2020 (SCI-Expanded, Scopus)

12. Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC)

Özer G., Özbay B., Öter Z. Ç., Tarakçi G., YILMAZ M. S., Bulduk M. E., et al.

International Journal of Cast Metals Research , vol.33, no.2-3, pp.146-152, 2020 (SCI-Expanded, Scopus)

13. Evaluation of the reheating behavior of the cooling slope cast A356 and A380 aluminum alloys

Acar S., Açıcı N., Güler K. A.

MATERIALS RESEARCH EXPRESS , vol.6, no.12, 2019 (SCI-Expanded, Scopus)

14. A Study on Al/Cu Bimetal Production by Lost Foam Casting

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , vol.55, no.11, pp.728-740, 2018 (SCI-Expanded, Scopus)

15. Investigation of carbon contamination in lost foam castings of low carbon steel

KILIÇ Ö., ACAR S., KISASÖZ A., GÜLER K. A.

CHINA FOUNDRY , vol.15, no.5, pp.384-389, 2018 (SCI-Expanded, Scopus)

16. Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by thixoforging combined with low superheat casting

GECÜ R., ACAR S., KISASÖZ A., ALTUG GULER K. A., KARAASLAN A.

Transactions of Nonferrous Metals Society of China (English Edition) , vol.28, no.3, pp.385-392, 2018 (SCI-Expanded, Scopus)

17. Characterization of Mechanical Properties and Corrosion Behaviours of Mn and Al Bronze Castings

Turker M., ACAR S., CÖMERT Z. Y., KISASÖZ A., GÜLER K. A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , vol.55, no.1, pp.5-18, 2018 (SCI-Expanded, Scopus)

18. Preparation of Melt Derived 45S5 Bioactive Glass from Rice Hull Ash and Its Characterization

Yücel S., Özçimen D., Terzioğlu P., Acar S., Yaman C.

ADVANCED SCIENCE LETTERS , vol.19, no.12, pp.3477-3481, 2013 (Peer-Reviewed Journal) Sustainable Development

Papers Presented at Peer-Reviewed Scientific Conferences 28

1. Development of a Semi-Solid Forging Process Combined with Orbital Shaking Cooling

EKER Y. E., ACAR S., GÜLER K. A.

12. Uluslararası Alüminyum Sempozyumu (Alus 12), İstanbul, Turkey, 18 - 20 September 2025, pp.203-206, (Full Text)

2. A NEW APPROACH TO THE PRODUCTION OF SEMI-SOLID FORMABLE RAW MATERIALS: LOST FOAM CAST

TÜTÜK İ., ACAR S., GÜLER K. A.

12. Uluslararası Alüminyum Sempozyumu (Alus 12), İstanbul, Turkey, 18 - 20 September 2025, pp.170-175, (Full Text)

3. INVESTIGATION OF THE MECHANICAL VIBRATION EFFECT IN COOLING SLOPE CASTING

GÜNEŞ B., ACAR S., GÜLER K. A.

INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Turkey, 5 June - 06 July 2024, (Full Text)

4. Effect of Dynamic Stimuli on Artificial Aging in Casting and Solidification of 2014 Al Alloy

Dönmez Y. T., ACAR S., GÜLER K. A.

2. ULUSLARARASI MÜHENDİSLİK VE FEN BİLİMLERİ KONGRESİ, İstanbul, Turkey, 16 - 17 December 2023, (Full Text)

5. EFFECT OF DYNAMIC STIMULI ON ARTIFICIAL AGING IN CASTING AND SOLIDIFICATION OF 2014 ALUMINUM ALLOY

DÖNMEZ Y. T., ACAR S., GÜLER K. A.

2. ULUSLARARASI MÜHENDISLIK VE FEN BILIMLERI KONGRESI, İstanbul, Turkey, 16 - 17 December 2023, (Full Text)

6. Effect of Aging Conditions of AA6063 and AA6061 Alloys on Corrosion Behavior

Güler K. A., Acar S., Öztürk K., Tütük İ., Doğan M.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Turkey, 03 March 2022, pp.294-298, (Full Text)

7. Investigation of Pouring Temperature for Direct Water-Cooled Aluminum Lost Foam Castings

Tütük İ., Acar S., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Turkey, 3 - 04 March 2022, pp.364-367, (Full Text)

8. Effect of Aging Conditions of AA6063 and AA6061 Alloys on Corrosion Behavior

Tütük İ., Doğan M., Acar S., Öztürk K., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Turkey, 3 - 04 March 2022, pp.294-298, (Full Text)

9. Aluminium Matrix In-Situ Ex-Situ Hybrid Composite Production By Vacuum Infiltration Method

Birsen D., Tütük İ., Öztürk K., Acar S., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Turkey, 3 - 04 March 2022, pp.471-474, (Full Text)

10. Production of Aluminium Matrix in-Situ Composites Using Low Superheat Casting Method

Özkan T., Tütük İ., Acar S., Güler K. A.

10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Turkey, 3 - 04 March 2022, pp.467-470, (Full Text)

11. A Preliminary Study on TiO2 Coating Deposited on the AISI 2205 by High Energy Ball Milling

ACAR S., BİROL B., KISASÖZ A.

International Metallurgy and Materials Congress (IMMC2021), Online, Turkey, 10 - 12 June 2021, pp.511-514, (Full Text)

12. Production of PRIMECAST® Polystyrene by Selective Laser Sintering (SLS) Method and Development of Surface Roughness of Sintered Parts

ÖZBAY KISASÖZ B., ÖZER G., BULDUK M. E., TARAKÇI G., ÖTER Z. Ç., KOÇ E., et al.

Additive Manufacturing Conference Turkey-AMC TURKEY, İstanbul, Turkey, 17 - 18 October 2019, (Full Text)

13. The effect of orbital shaking on the microstructure of lost foam cast A356 aluminum alloy

Kılıç Ö., Acar S., Güler K. A.

9th International Aluminium Symposium, İstanbul, Turkey, 10 - 11 October 2019, pp.256-260, (Full Text)

14. The effect of orbital shaking on the microstructure of lost foam cast A356 alloy

KILIÇ Ö., ACAR S., GÜLER K. A.

9th International Aluminium Symposium, İstanbul, Turkey, 10 - 11 October 2019, (Full Text)

15. A Study on the Effects of Solution Heat Treatment Time on Eutectic Silicon Morphology for A380 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.304-306, (Full Text)

16. Effects of Reheating Time on Hardness and Microstructural Properties of Thixoforged AA2014 Alloy Manufactured via Cooling Slope Casting

ACAR S., GÜLER K. A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 October 2018, pp.269-271, (Full Text)

27. Effect of solvent and concentration on coating quality of dip coated polycaprolactone (PCL) on AZ91E alloy to reduce degradation rate

ACAR S., DERMAN S., AKÇA C.

2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosnia And Herzegovina, 24 May 2016, pp.1, (Summary Text)

28. Examination of coating parameters of biopolymer coating on AZ91D magnesium alloy used as implant in human

AKÇA C., ACAR S., DERMAN S.

Metal 2015, 3 - 05 June 2015, (Full Text)

Episodes in the Encyclopedia 1

1. Lost Foam Casting of Metallic Parts and Structures

Güler K. A., Acar S.

Elsevier Science, Oxford/Amsterdam , pp.1-14, 2020

Metrics

Publication

Publication (WoS)

Publication (Scopus)

Citation (WoS)

117

H-Index (WoS)

Citation (Scopus)

136

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Citation (TrDizin)

H-Index (TrDizin)

Citation (Sum Other)

Project

Open Access

104

UN Sustainable Development Goals

Publications & Works

Publication

Publication (WoS)

Publication (Scopus)

Citation (WoS)

H-Index (WoS)

Citation (Scopus)

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Citation (TrDizin)

H-Index (TrDizin)

Citation (Sum Other)

Project

Open Access