Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 15

1. Microstructure evolution of AlSi10Mg alloy in RAP process

Tütük İ., Acar S., Özer G., Güler K. A.
MATERIALPRUEFUNG/MATERIALS TESTING , cilt.66, sa.11, ss.1820-1828, 2024 (SCI-Expanded) identifier

2. Impacts of T6 heat treatment on the microstructural, mechanical, and corrosion properties of thixoformed AA7075 alloy produced by cooling slope casting

Acar S., Güler K. A.
MATERIALS RESEARCH EXPRESS , cilt.11, sa.10, ss.1-13, 2024 (SCI-Expanded) identifier

3. Microstructural, hardness, and wear properties of Mg2Si-reinforced Al matrix in-situ composites produced by low superheat casting

Ozkan T., Tutuk I., ACAR S., GECÜ R., GÜLER K. A.
Materials Today Communications , cilt.38, 2024 (SCI-Expanded) identifier

4. Electrochemical corrosion behaviour of UNS S32205 duplex stainless steel dependent on sigma phase precipitation

Kısasöz B. Ö., Tütük İ., ACAR S., KISASÖZ A.
Materialpruefung/Materials Testing , 2024 (SCI-Expanded) identifier

5. Microstructure and wear characteristics of hybrid reinforced (ex-situ SiC–in-situ Mg2Si) Al matrix composites produced by vacuum infiltration method

Birsen D., Tütük İ., Acar S., Karabeyoğlu S. S., Özer G., Güler K. A.
MATERIALS CHEMISTRY AND PHYSICS , cilt.302, ss.127743, 2023 (SCI-Expanded) identifier

6. The Application of the Direct Water Cooling Process on the Lost-Foam Casting Technique to Improve Microstructural and Mechanical Properties of A356 Alloy

Tutuk I., ACAR S., GÜLER K. A.
International Journal of Metalcasting , cilt.17, sa.3, ss.2324-2337, 2023 (SCI-Expanded) identifier identifier

7. A THOROUGH STUDY ON THIXOFORMABILITY OF THE COOLING SLOPE CAST 7075 FEEDSTOCKS: STEP-BY-STEP OPTIMIZATION OF THE FEEDSTOCK PRODUCTION AND THIXOFORMING PROCESSES

Acar S., Güler K. A.
INTERNATIONAL JOURNAL OF METALCASTING , cilt.17, sa.2, ss.717-739, 2023 (SCI-Expanded) Creative Commons License

8. A Preliminary Study Upon the Applicability of the Direct Water Cooling with the Lost Foam Casting Process

ACAR S., GÜLER K. A.
INTERNATIONAL JOURNAL OF METALCASTING , cilt.15, sa.1, ss.88-97, 2021 (SCI-Expanded) identifier identifier

9. Producing non-dendritic A356 and A380 feedstocks: Evaluation of the effects of cooling slope casting parameters

ACAR S., GÜLER K. A.
MATERIALS TESTING , cilt.62, sa.11, ss.1147-1152, 2020 (SCI-Expanded) identifier identifier

10. Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC)

Özer G., Özbay B., Öter Z. Ç., Tarakçı G., Yılmaz M. S., Bulduk M. E., et al.
International Journal Of Cast Metals Research , cilt.25, sa.3, ss.146-152, 2020 (SCI-Expanded) Creative Commons License

11. Evaluation of the reheating behavior of the cooling slope cast A356 and A380 aluminum alloys

Acar S., Açıcı N., Güler K. A.
MATERIALS RESEARCH EXPRESS , cilt.6, sa.12, 2019 (SCI-Expanded) Creative Commons License identifier identifier

12. A Study on Al/Cu Bimetal Production by Lost Foam Casting

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.55, sa.11, ss.728-740, 2018 (SCI-Expanded) identifier identifier

13. Investigation of carbon contamination in lost foam castings of low carbon steel

KILIÇ Ö., ACAR S., KISASÖZ A., GÜLER K. A.
CHINA FOUNDRY , cilt.15, sa.5, ss.384-389, 2018 (SCI-Expanded) Creative Commons License identifier identifier

14. Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by thixoforging combined with low superheat casting

GECÜ R., ACAR S., KISASÖZ A., ALTUG GULER K. A., KARAASLAN A.
Transactions of Nonferrous Metals Society of China (English Edition) , cilt.28, sa.3, ss.385-392, 2018 (SCI-Expanded) identifier identifier

15. Characterization of Mechanical Properties and Corrosion Behaviours of Mn and Al Bronze Castings

Turker M., ACAR S., CÖMERT Z. Y., KISASÖZ A., GÜLER K. A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.55, sa.1, ss.5-18, 2018 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler 2

1. Effect of Waste Titanium Chips Addition Into the Aluminum Alloys on Their Microstructure

Ozer G., ACAR S., Kisasoz A., GÜLER K. A.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.34, sa.4, ss.1096-1105, 2021 (ESCI) Creative Commons License identifier identifier identifier

2. Preparation of Melt Derived 45S5 Bioactive Glass from Rice Hull Ash and Its Characterization

Yücel S., Özçimen D., Terzioğlu P., Acar S., Yaman C.
ADVANCED SCIENCE LETTERS , cilt.19, sa.12, ss.3477-3481, 2013 (Hakemli Dergi) Sürdürülebilir Kalkınma
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 19

1. INVESTIGATION OF THE MECHANICAL VIBRATION EFFECT IN COOLING SLOPE CASTING

GÜNEŞ B., ACAR S., GÜLER K. A.
INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Türkiye, 5 Haziran - 06 Temmuz 2024, (Tam Metin Bildiri)

2. Effect of Dynamic Stimuli on Artificial Aging in Casting and Solidification of 2014 Al Alloy

Dönmez Y. T., ACAR S., GÜLER K. A.
2. ULUSLARARASI MÜHENDİSLİK VE FEN BİLİMLERİ KONGRESİ, İstanbul, Türkiye, 16 - 17 Aralık 2023

3. Aluminium Matrix In-Situ Ex-Situ Hybrid Composite Production By Vacuum Infiltration Method

Birsen D., Tütük İ., Öztürk K., Acar S., Güler K. A.
10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.471-474, (Tam Metin Bildiri) Creative Commons License

4. Effect of Aging Conditions of AA6063 and AA6061 Alloys on Corrosion Behavior

Tütük İ., Doğan M., Acar S., Öztürk K., Güler K. A.
10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.294-298, (Tam Metin Bildiri) Creative Commons License

5. Investigation of Pouring Temperature for Direct Water-Cooled Aluminum Lost Foam Castings

Tütük İ., Acar S., Güler K. A.
10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.364-367 Creative Commons License

6. Production of Aluminium Matrix in-Situ Composites Using Low Superheat Casting Method

Özkan T., Tütük İ., Acar S., Güler K. A.
10. Uluslararası ALÜMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 3 - 04 Mart 2022, ss.467-470 Creative Commons License

7. A Preliminary Study on TiO2 Coating Deposited on the AISI 2205 by High Energy Ball Milling

ACAR S., BİROL B., KISASÖZ A.
International Metallurgy and Materials Congress (IMMC2021), Online, Türkiye, 10 - 12 Haziran 2021, ss.511-514

8. The effect of orbital shaking on the microstructure of lost foam cast A356 aluminum alloy

Kılıç Ö., Acar S., Güler K. A.
9th International Aluminium Symposium, İstanbul, Türkiye, 10 - 11 Ekim 2019, ss.256-260 Creative Commons License

9. A Study on the Effects of Solution Heat Treatment Time on Eutectic Silicon Morphology for A380 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.304-306, (Tam Metin Bildiri)

10. Effects of Reheating Time on Hardness and Microstructural Properties of Thixoforged AA2014 Alloy Manufactured via Cooling Slope Casting

ACAR S., GÜLER K. A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.269-271

11. Investigation of the Effects of Solution Heat Treatmeant Time on the Eutectic Silicon for A356 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.268-272, (Tam Metin Bildiri)

12. Dry Sliding Wear Properties of AA7075 Aluminium Matrix Hybrid Composites

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.295-300

13. Cooling Slope Casting and Thixoforging of A319 Alloy

ACAR S., GÜLER K. A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.57-62

14. A356 Alaşımının Eğimli Soğutucu İle Dökümü ve Yarı-Katı Dövme İşlemi

Açıcı N., ACAR S., GÜLER K. A.
8. Alüminyum Sempozyumu, İstanbul, Türkiye, 05 Ekim 2017, ss.294-298

15. Aging of A356 Aluminum Billets Produced by Semi-Solid Metal Processing

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.
3rd International Iron & Steel Symposium, Karabük, Türkiye, 03 Nisan 2017, ss.267-270

16. Microstructural Evaluation of T6-Treated A380 Alloy Manufactured by Semi-Solid Metal Casting

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.
International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.284-288, (Tam Metin Bildiri)

17. Corrosion, Mechanical and Microstructural Characteristics of Modified Navy G Bronze Casts

TURKER M., ACAR S., CÖMERT Z. Y., KISASÖZ A., GÜLER K. A.
International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.303-305

18. Effect of solvent and concentration on coating quality of dip coated polycaprolactone (PCL) on AZ91E alloy to reduce degradation rate

ACAR S., DERMAN S., AKÇA C.
2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosna-Hersek, 24 Mayıs 2016, ss.1, (Özet Bildiri)

19. Examination of coating parameters of biopolymer coating on AZ91D magnesium alloy used as implant in human

AKÇA C., ACAR S., DERMAN S.
Metal 2015, 3 - 05 Haziran 2015
Ansiklopedide Bölümler 1

1. Lost Foam Casting of Metallic Parts and Structures

Güler K. A., Acar S.
Elsevier Science, Oxford/Amsterdam , ss.1-14, 2020
Metrikler

Yayın

37

Yayın (WoS)

9

Yayın (Scopus)

14

Atıf (WoS)

64

H-İndeks (WoS)

5

Atıf (Scopus)

110

H-İndeks (Scopus)

6

Atıf (TrDizin)

1

H-İndeks (TrDizin)

1

Proje

6

Açık Erişim

104
BM Sürdürülebilir Kalkınma Amaçları