Dr. &#214;ğr. &#220;yesi Ali Serdar VANLI

NOMAK AKDOĞAN A., VANLI A. S.

Lecture Notes in Mechanical Engineering , cilt.26, ss.122-130, 2019 (SCI-Expanded)

8. Effects of process parameters on mechanical and metallurgical properties in high pressure die casting of AZ91 magnesium alloy

Vanli A. S., AKDOĞAN A.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.26, sa.1, ss.27-35, 2019 (SCI-Expanded)

9. Production Performance Of Wood Flour Reinforced Polymer Composites in Extruding Process

ACTA PHYSICA POLONICA A , cilt.134, sa.1, ss.18-20, 2018 (SCI-Expanded)

10. Optimization of end milling parameters and determination of the effects of edge profile for high surface quality of AISI H13 steel by using precise and fast measurements

Durakbasa M. N., AKDOĞAN A., Vanli A. S., Bulutsuz A.

MEASUREMENT , cilt.68, ss.92-99, 2015 (SCI-Expanded)

11. Material characterization of different-dimensioned wood particle-reinforced polymer composites

AKDOĞAN A., Vanli A. S.

Journal of Thermoplastic Composite Materials , cilt.26, sa.9, ss.1237-1248, 2013 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 24

1. Production of Aluminum Alloy Sealing Part by Semi Solid Die Casting Method

Ali Y., AKDOĞAN A., VANLI A. S.

Defect and Diffusion Forum , cilt.417, ss.17-22, 2022 (Scopus)

2. Production Productivity by Automation Application in ManufacturingIndustry

Akdoğan A., Vanlı A. S., Fırat S., Kocaman M.

Acta Materialia Turcica , sa.4, ss.28-32, 2020 (Hakemli Dergi)

3. Natural fiber thermoplastic composites in terms of new production technologies: A review

Vanlı A. S., Akdoğan A., Eryıldız M.

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.26, sa.1, ss.30-36, 2020 (ESCI)

4. Investigation of protective surface film behavior of fluorine containingcover gas parameters on molten magnesium alloy

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.26, sa.1, ss.51-53, 2020 (ESCI)

5. Tools of Industry 4.0 on Die Casting Production Systems

VANLI A. S., AKDOĞAN A., Durakbaşa N. M.

Proceedings of the International Symposium for Production Research 2019 , 2019 (Hakemli Dergi)

6. Process Optimization and Alloy Modification in Hot Chamber Die Casting

Karakaya C., Vanlı A. S., Akdoğan A.

Academic Journal of Science , cilt.09, sa.1, ss.13-22, 2019 (Hakemli Dergi)

7. Yüzey Pürüzlülüğü Ölçme İşleminde Ölçme Belirsizliği Hesapları ve Belirsizlik Bütçesi Tablosu

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.32, sa.2, ss.249-252, 2019 (Hakemli Dergi)

8. Tüm Bileşenleri İle Basınçlı Döküm Yönteminde Otomasyon

Vanlı A. S., Akdoğan A.

OTOMASYON , ss.13-20, 2019 (Hakemli Dergi)

9. SMART DIE CASTING FOUNDRY ACCORDING TO INDUSTRIAL REVOLUTION 4.0

VANLI A. S., AKDOĞAN A., KERBER K., OZBEK S., DURAKBAŞA N.

ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING , cilt.61, sa.4, ss.787-792, 2018 (ESCI)

10. Ekstrüderler için Uygun Vida ve Kovan Tasarımları

PLASTİK ve AMBALAJ TEKNOLOJİSİ , cilt.23, sa.238, ss.45-48, 2018 (Hakemli Dergi)

11. Tüm Bileşenleri ile Basınçlı Döküm Yönteminde Otomasyon II

MakineTek , sa.210, ss.106-112, 2015 (Hakemli Dergi)

12. Savunma Sanayinde Kullanılan Magnezyum Alaşımları ve Uygulama Alanları

International Journal of Engineering Research and Development , cilt.7, sa.4, ss.13-20, 2015 (Hakemli Dergi)

13. Tüm Bileşenleri ile Basınçlı Döküm Yönteminde Otomasyon I

Durakbaşa M. N., Akdoğan A., Vanlı A. S., Günay Bulutsuz A.

MakinaTek , sa.209, ss.184-190, 2015 (Hakemli Dergi)

14. Surface Roughness Modeling with Edge Radius and End Milling Parameters on Al 7075 Alloy Using Taguchi and Regression Methods

ACTA IMEKO , cilt.3, sa.4, ss.46-51, 2014 (Scopus)

15. Mechanical and Morphological Properties of Cold Chamber High Pressure Die Casting AZ91 Magnesium Alloy Products

Akdoğan A., Sönmez H., Vanlı A. S.

Academic Journal of Science , cilt.3, sa.1, ss.113-119, 2014 (Hakemli Dergi)

16. Optimum Process Parameters During End Milling Operation of AISI H13 Steel for High Surface Quality

Vanlı A. S., Günay Bulutsuz A., Akdoğan A., Durakbaşa M. N.

Academic Journal of Science , cilt.3, sa.2, ss.233-240, 2014 (Hakemli Dergi)

17. Magnezyum Alaşımlarının Ergitme Prosesinde Koruyucu Gaz Atmosferlerinin Kullanımı

MakineTek , sa.6, ss.280-286, 2014 (Hakemsiz Dergi)

18. Magnezyum Alaşımlarının Basınçlı Dökümü

Sönmez H., Akdoğan A., Vanlı A. S.

Makinatek Dergisi , sa.188, ss.368-372, 2013 (Hakemsiz Dergi)

19. Magnezyum Alaşımları Yüksek Kalitede Basınçlı Dökülüyor

Metalik Dergisi , sa.21, ss.28-31, 2013 (Hakemsiz Dergi)

20. Ahşap Talaşının Geri Kazanımı ile Polimer Kompozit Üretimi

AP Ambalaj Plastik Dergisi , cilt.2, ss.50-51, 2012 (Hakemsiz Dergi)

21. Investigation of the Protective Atmospheres Used for Melting Process of High Pressure Die Casting Magnesium Alloys

VANLI A. S.

Academic Journal of Science , cilt.1, sa.3, ss.109-120, 2012 (Hakemli Dergi)

22. Material Characterization of Extrusion Compounded Polymer Composites with Different Dimensioned Wood Additives

Vanlı A. S., Akdoğan A., Sönmez H.

International Journal of Arts & Sciences , cilt.3, sa.9, ss.314, 2010 (Hakemli Dergi)

23. Investigation the Effects of Process Parameters on Product Quality in Cold Chamber High Pressure Die Casting of Magnesium Alloys

International Journal of Arts and Sciences , cilt.3, sa.9, ss.320-325, 2010 (Hakemli Dergi)

24. Fluidized Bed Drying System for Continuous Processing of Lignocellulosic Polymer Composite Materials

Vanlı A. S., Akdoğan A., Koyun A.

International Journal of Arts and Sciences , cilt.3, sa.1, ss.43-49, 2009 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 47

1. Effects of the New Generation High-Speed Spindle on the Production Performance of Vertical Machining Centers

Şen Ç., Kurt M., Alev U., Mertöz C., VANLI A. S., AKDOĞAN A.

24th International Symposium for Production Research, ISPR 2024, Budva, Karadağ, 10 - 12 Ekim 2024, ss.225-235, (Tam Metin Bildiri)

2. Manufacturing Productivity Increase by Innovative Die Design in High Pressure Die Casting

Alev U., Mertöz C., VANLI A. S., AKDOĞAN A.

International Symposium for Production Research, ISPR 2023, Antalya, Türkiye, 5 - 07 Ekim 2023, ss.337-343, (Tam Metin Bildiri)

3. Quality Control Automation System for Furniture Connecting Fittings to Achieve Zero Defect

Mertöz C., Şen Ç., Utuş Ö., Karaarslan N., Başçı H., Fırat S., et al.

22nd International Symposium for Production Research, ISPR 2022, Antalya, Türkiye, 6 - 08 Ekim 2022, ss.211-223, (Tam Metin Bildiri)

4. Product Development for Lifetime Prolongation via Benchmarking

Serbet T., Yasar M., Karayol T., AKDOĞAN A., VANLI A. S.

21st International Symposium on Production Research (ISPR) - Digitizing Production System, ELECTR NETWORK, 7 - 09 Ekim 2021, ss.210-218, (Tam Metin Bildiri)

5. Assembling Automation for Furniture Fittings to Gain Durability and to Increase Productivity

Kocaman M., Mertoz C., Gokce R., Firat S., AKDOĞAN A., VANLI A. S.

21st International Symposium on Production Research (ISPR) - Digitizing Production System, ELECTR NETWORK, 7 - 09 Ekim 2021, ss.243-255, (Tam Metin Bildiri)

6. Production of Aluminum Alloy Sealing Part by Semi Solid Die Casting Method

Ali Y., AKDOĞAN A., VANLI A. S.

3rd Asia Conference on Material and Manufacturing Technology, ACMMT 2021, Tokyo, Japonya, 20 Aralık 2021, (Tam Metin Bildiri)

7. MINIMIZING COATING PROCESS SOURCED HYDROGEN EMBRITTLEMENT OF FASTENERS

Buyuk U., Akdogan A., Vanli A. S., Durakbasa N.

32nd International DAAAM Symposium on Intelligent Manufacturing and Automation, DAAAM 2021, Virtual, Online, 28 - 29 Ekim 2021, cilt.32, ss.508-513, (Tam Metin Bildiri)

8. Effect of gating system improvements on production quality in high pressure die casting

Akdogan A., Vanli A. S., Numan Durakbasa M.

31st International DAAAM Virtual Symposium "Intelligent Manufacturing and Automation", Mostar, Bosna-Hersek, 21 - 24 Ekim 2020, cilt.31, ss.459-462, (Tam Metin Bildiri)

9. Tools of Industry 4.0 on Die Casting Production Systems

VANLI A. S., AKDOĞAN A., Durakbasa M. N.

19th International Symposium for Production Research, ISPR 2019, Vienna, Avusturya, 28 - 30 Ağustos 2019, ss.328-334, (Tam Metin Bildiri)

10. Dökme Demirden İmal Edilmiş Ağır Hizmet Dizel Motor Bloğunda Yapılan Hafifletme Çalışması, Yolluk Tasarımı ve Döküm Simülasyonu

Kirenci Ü., Özcan E., Kuyumcu A. M., Akdoğan A., Vanlı A. S.

2. Ulusal Döküm Kongresi 2019, İzmir, Türkiye, 30 Kasım - 01 Aralık 2019, (Tam Metin Bildiri)

11. Zamak Alaşımların Sıcak Kamaralı Basınçlı DökümYönteminde Proses Optimizasyonu ve Alaşım Modifikasyonu

Karakaya C., Büyük U., Karayol T., VANLI A. S., AKDOĞAN A.

TUDOKSAD Akademi 2. Ulusal Döküm Kongresi, Türkiye, 30 Kasım - 01 Aralık 2019, (Tam Metin Bildiri)

12. Production Productivity by Automation Application in Manufacturing Industry

Fırat S., Kocaman M., Vanlı A. S., Akdoğan A.

9th International Advances in Applied Physics Materials Science Congress Exhibition, Muğla, Türkiye, 22 - 28 Ekim 2019, ss.87, (Tam Metin Bildiri)

13. Process Optimization and Alloy Modification in Hot Chamber Die Casting

Karakaya C., VANLI A. S., AKDOĞAN A.

International Journal of Arts Sciences’ (IJAS) International Conference for Academic Disciplines, 4 - 07 Haziran 2019, (Tam Metin Bildiri)

14. Dökme Demirden İmal Edilmiş Ağır Hizmet Dizel Motor Bloğuna Yönelik Hafifletme Çalışması

Kirenci Ü., Vanlı A. S., Akdoğan A.

4. Uluslararası Demir Çelik Sempozyumu, Karabük, Türkiye, 4 - 06 Nisan 2019, (Tam Metin Bildiri)

15. Wear Behavior of SiC Reinforced AZ91 Magnesium Matrix Composites Fabricated by High Pressure Die Casting

VANLI A. S., KÜÇÜKYILDIRIM B. O., AKDOĞAN A.

19th International Metallurgy Materials Congress, 25 - 27 Ekim 2018, ss.197-201, (Tam Metin Bildiri)

16. Lean Manufacturing and Re-planning Works of a Shipyard Foundry

Nomak Akdoğan A., Vanlı A. S., Doğru M. K.

10. ULUSLARARASI DÖKÜM KONGRESİ, İstanbul, Türkiye, 25 Ekim 2018, ss.367-372, (Tam Metin Bildiri)

17. Bir Tersane Dökümhanesinde Yalın Üreim ve Yeniden Planlama Çalışmaları

AKDOĞAN A., VANLI A. S., DOĞRU M. K.

10. ULUSLARARASI DÖKÜM KONGRESİ, Muğla, Türkiye, 25 - 27 Ekim 2018, (Tam Metin Bildiri)

18. Smart Die Casting Foundry According to Industrial Revolution 4.0

VANLI A. S., AKDOĞAN A., Kerber K., Ozbek S., DURAKBAŞA N.

5th International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, Romanya, 25 - 26 Temmuz 2018, (Tam Metin Bildiri)

19. Effects of Process Parameters on Mechanical and Metallurgical Properties in High Pressure Die Casting of Magnesium Alloys

9th International Advances in Applied Physics Materials Science Congress Exhibition, 24 - 30 Nisan 2018, (Özet Bildiri)

20. 3D Imaging and Visualization of EngineeringMaterials with Optical Metrology

2nd International Conference on Engineering Technology and Innovation, Budapest, Macaristan, 7 - 11 Mart 2018, (Tam Metin Bildiri)

21. Smart Die Casting Foundry 4.0

VANLI A. S., KÜÇÜKYILDIRIM B. O., AKDOĞAN A.

2nd International Conference on Engineering Technology and Innovation, Budapest, Macaristan, 7 - 11 Mart 2018, (Özet Bildiri)

22. Fabrication of SiC Reinforced Magnesium Matrix Composites by Cold Chamber High Pressure Die Casting Method

1st International Conference of Advanced Materials and Manufacturing Technologies, Karabük, Türkiye, 25 - 27 Ekim 2017, (Tam Metin Bildiri)

23. Döküm Tekniği İçin Üç Boyutlu Yazıcılarla Model İmalatı

Tekin B., AKDOĞAN A., VANLI A. S.

9. Tüdöksad Ulusal Döküm Kongresi, Eskişehir, Türkiye, 20 - 21 Ekim 2017, (Tam Metin Bildiri)

24. Sürdürülebilir Başarı İçin Rehber ISO 9001-2015 Kalite Yönetim Sistem Standardı

Vanlı A. S., Durakbaşa N. M., Akdoğan A., Cebe E. Ö.

9. Tüdöksad Ulusal Döküm Kongresi, Eskişehir, Türkiye, 20 - 21 Ekim 2017, (Tam Metin Bildiri)

25. Regression Modelling of Surface Parameters for End Milling Process of X40CrMoV5-1 Hot Work Tool Steel

International Symposium for Production Research 2017, Vienna, Avusturya, 13 - 15 Eylül 2017, (Tam Metin Bildiri)

26. Process Optimization and Surface Modification of Magnesium Alloy Die Casting Parts

International Journal of Arts Sciences’ (IJAS) International Conference for Engineering and Technology, Viyana, Avusturya, 25 - 29 Haziran 2017, (Özet Bildiri)

27. Processing Performance Of Lignocellulosic Material Reinforced Polyethylene Composites In Compounding Extruder

VANLI A. S., AKDOĞAN A., Durakbaşa N. M.

7th International Advances in Applied Physics and Materials Science Congress Exhibition, 22 - 26 Nisan 2017, (Özet Bildiri)

28. Die Casting Process Optimization Of AZ91 Magnesium Alloy And Product Surface Modification

7th International Advances in Applied Physics and Materials Science Congress Exhibition, 22 - 26 Nisan 2017, (Özet Bildiri)

29. Savunma Sanayinde Kullanılan Magnezyum Alaşımı Parçaların Üretim Yöntemleri

2nd International Defense Industry Symposium, 6 - 08 Nisan 2017, (Tam Metin Bildiri)

30. An integrated process design for Magnesium alloy part manufacturing in Turkey

VANLI A. S., AKDOĞAN A., Durakbasa N.

3rd International Iron Steel Symposium (UDCS’17), Karabük, Türkiye, 3 - 05 Nisan 2017, (Tam Metin Bildiri)

31. Integrated Die Casting Manufacturing System for Sustainable High Quality of Magnesium Alloy Products

International Conference on Production Research – Africa, Europe and the Middle East 4th International Conference on Quality and Innovation in Engineering and Management, 23 - 25 Haziran 2016 Sürdürülebilir Kalkınma

32. Electroless Nickel Plating on Pretreated AZ91 Magnesium Alloy Die Casting Parts

DEMİRCİ M., VANLI A. S., AKDOĞAN A.

2nd International Conference on Pure & Applied Science, 1 - 05 Haziran 2016, (Özet Bildiri)

33. Investigation The Effects of Process Parameters in Hot Chamber High Pressure Die Casting of Magnesium Alloys

International Mechanical Engineering and Technologies Conference MECHATECH'16, İstanbul, Türkiye, 17 - 18 Mayıs 2016, ss.104-109, (Tam Metin Bildiri)

34. Effects Of Heat Treatment On Mechanical And Corrosion Properties of Magnesium Alloys

”, Conference on Advances in Mechanical Engineering Istanbul 2016 – ICAME2016, İstanbul, Türkiye, 11 - 13 Mayıs 2016, ss.117-120, (Tam Metin Bildiri)

35. INVESTIGATION OF THERMAL CONDITIONING OF HIGH PRESSURE DIE CASTING DIES

VANLI A. S., AKDOĞAN A., KÜÇÜKYILDIRIM B. O.

INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL, İstanbul, Türkiye, 23 - 25 Aralık 2015, ss.149-153, (Tam Metin Bildiri)

36. Fabrication of Magnesium Matrix Composite Materials by High Pressure Die Casting Method

International Journal of Arts & Sciences Multidisciplinary Conference for Technology and Science, 29 Haziran - 06 Temmuz 2015, (Özet Bildiri)

37. Protection Behavior of Fluorine Containing Cover Gases on Molten AZ91 Magnesium Alloy

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 13 - 15 Mayıs 2015, ss.522-525, (Tam Metin Bildiri)

38. PROTECTION BEHAVIOUR OF FLUORINE-CONTAINING COVER GASES ON MOLTEN AZ91 MAGNESIUM ALLOY

INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 04 Mayıs 2015, ss.522-525, (Tam Metin Bildiri)

39. Characterization of Surface Films Formed on Molten Magnesium in the Atmospheres Containing Hydro Fluorocarbon HFC 134A

DEMİRCİ M., VANLI A. S., AKDOĞAN A.

International Journal of Arts & Sciences Conferences, Londrina, Brezilya, 4 - 07 Kasım 2014, cilt.8, ss.421-425, (Tam Metin Bildiri)

40. Savunma Sanayinde Kullanılan Magnezyum Alaşımları ve Uygulama Alanları

Uluslararası Katılımlı 1. Savunma Sanayi Sempozyumu, Kırıkkale, Türkiye, 9 - 10 Nisan 2015, cilt.7, ss.51-59, (Tam Metin Bildiri)

41. The Using of Sulphur Hexafluoride SF6 as a Cover Gas for Protection of Molten Magnesium Alloys

DEMİRCİ M., VANLI A. S., AKDOĞAN A., SÖNMEZ H.

International Journal of Arts & Sciences Conference, Barselona, İspanya, 16 - 19 Haziran 2014, cilt.7, ss.47-53, (Tam Metin Bildiri)

42. CHARACTERIZATION OF SURFACE FILMS FORMED ON MOLTEN MAGNESIUM IN ATMOSPHERES CONTAINING HYDRO FLUOROCARBON (HFC-134A)

DEMİRCİ M., VANLI A. S., AKDOĞAN A., SÖNMEZ H.

Conference of the International Journal of Arts & Sciences, Londra, Birleşik Krallık, 03 Kasım 2014, ss.421-425, (Tam Metin Bildiri)

43. Quality Control Methods for High Pressure Die Casting of Magnesium Alloy Products

Akdoğan A., Vanlı A. S., Sönmez H.

Conference of the International Journal of Arts & Sciences, Freiburg, Almanya, 30 Aralık 2013 - 03 Ocak 2014, cilt.7, sa.1, ss.105-115, (Tam Metin Bildiri)

44. Magnezyum Alaşımı Parça İmalatı İçin Soğuk Kamaralı Basınçlı Döküm Makinesi ve İmalat Prosesinin Tasarımı

Vanlı A. S., Akdoğan A., Sönmez H.

TMMOB - Makine İmalat Teknolojileri Kongresi , Bursa, Türkiye, 6 - 07 Aralık 2013, ss.372-378, (Tam Metin Bildiri)

45. Determination of cutting tool geometries with high precise measurement techniques and investigation of their effects on workpiece surface properties

Durakbaşa M. N., AKDOĞAN A., VANLI A. S., Günay A.

12th IMEKO TC10 Workshop on Technical Diagnostics: New Perspective in Measurements, Tools and Techniques for Industrial Applications, Florence, İtalya, 6 - 07 Haziran 2013, ss.106-111, (Tam Metin Bildiri)

46. Material Characterization of Extrusion Compounded Polymer Composites with Different Dimensioned Wood Additives