Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Casting Quality of Gypsum Bonded Block Investment Casting Moulds

Advanced Materials Research, vol.445, pp.349-354, 2012 (Journal Indexed in SCI Expanded)

Effect of particle size variations of gypsum bonded investment powders on metallurgical quality of investment castings

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, vol.23, no.1, pp.60-64, 2010 (Journal Indexed in SCI) identifier identifier

Quench Sensitivity of Medium and High Strength Aluminium Alloys

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION, vol.52, no.6, pp.367-373, 2010 (Journal Indexed in SCI) identifier identifier

The Effect of Mould Lubrication on the Surface Quality of Semicontinuously D.C. Cast AI-6063 Billets

Praktische Metallographie-Practical Metallography, vol.34, no.11, pp.555-572, 1997 (Journal Indexed in SCI Expanded)

The effect of mould lubrication on the surface and subsurface quality of semicontiniously DC cast Al-6063 alloy billets

Praktische Metallographie-Practical Metallography, vol.34, no.11, pp.555-573, 1997 (Journal Indexed in SCI Expanded)

Effect of microstructural variations on the corrosion resistance of commercial 6351 aluminium extrusion bars

Praktische Metallographie-Practical Metallography, vol.32, no.7, pp.358-371, 1995 (Journal Indexed in SCI Expanded)

Rapid solidification of Al-7175 aerospace alloy

Praktische Metallographie-Practical Metallography, vol.32, no.1, pp.1-17, 1995 (Journal Indexed in SCI Expanded)

THE OCCURRENCE OF CRITICAL ABNORMAL GRAIN-GROWTH IN SUPER PURITY ALUMINUM AND HIGH-PURITY COPPER WAR-HEAD CONES

ZEITSCHRIFT FUR METALLKUNDE, vol.85, no.10, pp.723-732, 1994 (Journal Indexed in SCI) identifier

A metallographic examination of as-cast and as-worked structures of c.p. aluminium

Praktische Metallographie-Practical Metallography, vol.29, no.3, pp.118-132, 1992 (Journal Indexed in SCI Expanded)

Effect of composition on the critical (cold working) strain and recrystallized grain size of dilute Al-Fe alloys

Materials Science And Technology, vol.7, pp.835-842, 1991 (Journal Indexed in SCI Expanded)

THE INFLUENCE OF CASTING PRACTICE ON THE CRITICAL STRAIN AND SUBSEQUENT GRAIN-GROWTH OF COMMERCIAL PURITY ALUMINUM

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.141, no.2, pp.229-245, 1991 (Journal Indexed in SCI) identifier identifier

The influence of ingot structures on the properties of commercial purity aluminium under hot testing condition

MATERIALS SCIENCE AND TECHNOLOGY, vol.7, pp.321-330, 1991 (Journal Indexed in SCI Expanded)

Structural zones in commercially direct-chill cast aluminium rolling ingots

MATERIALS SCIENCE AND TECHNOLOGY, vol.3, no.4, pp.214-224, 1991 (Journal Indexed in SCI Expanded)

Articles Published in Other Journals

The effect of holding time after Sr addition on microstructural and mechanical properties of A356 alloy

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ, vol.26, no.4, pp.634-637, 2020 (Journal Indexed in ESCI) Creative Commons License

Investigation the Effect of Water Ratio and Additives on the Properties of Castable Refractory

International Journal of Scientific and Technological Research , vol.5, no.4, pp.43-51, 2019 (Refereed Journals of Other Institutions)

Quality Evaluation of Remelted A356 Scraps

Archives of Foundry Engineering, vol.16, no.3, pp.151-156, 2016 (Journal Indexed in ESCI) identifier identifier

Refereed Congress / Symposium Publications in Proceedings

Alüminyum Geri Dönüşümünde Farklı Flaks (Eritken) Bileşimlerinin Mekanik Özelliklere Etkisi

5. Uluslararası Mühendislik, Mimarlık ve Tasarım Kongresi, İstanbul, Turkey, 21 - 22 December 2019, pp.1301-1305

Ultrasonik gaz giderme yöntemi ile metal kalitesinin artırılması

2nd International Conference on Advanced Engineering Technologies (ICADET), 21 - 23 September 2017

Quality evaluation of remelted A356 scraps

Advances in Applied Physics and Materials Science. APMAS 2016, 2 - 03 June 2016 identifier identifier

The effect of secondary scrap ratio on the quality of LPDC cast wheels

High Tech Die Casting,ASSOCIAZIONE ITALIANA DI METALLURGIA. Venice, Italy., Venice, Italy, 01 June 2016

AA2024-B4Cp Kompozitlerinin Üretimi ve Karakterizasyonu

ALUS’05 5. Aluminyum Sempozyumu, Turkey, 13 - 14 October 2011, pp.466-473

Microstructural properties and wear behaviour of AlSi9Mg matrix B 4Cp reinforced composites

TMS 2011 - 140th Annual Meeting and Exhibition, San Diego, CA, United States Of America, 27 February - 03 March 2011, vol.2, pp.837-842 identifier

Microstructural properties and wear behaviour of AlSi9Mg matrix B4Cp reinforced composites

TMS 140th Annual Meeting and Exhibition TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, San Diego, CA, 27 February - 03 March 2011, pp.837-842 identifier

Dökülebilir Kalıplarda Segregasyon

12. Uluslararası Metalurji ve Malzeme Kongresi, 01 October 2005

Etial 145 Al-Si (AA 332) alaşımının modifikasyonu

II. Alüminyum Sempozyumu, Konya, Turkey, 22 - 24 May 2003, pp.1-10

A study on solute segregation in direct-chill and sand mould cast ingots of an Al-1.0%Mg alloy

53 rd Annual Technical Meeting and International Symposium on 'Materials for the Third Millennium' Organised by The Indian Institute of Metals, Kanpur, India, 13 - 16 November 1999, pp.1-3

The comparison of salt flux melting and arc melting processes employed in the recycling of UBC aluminium

53rd Annual Technical Meeting and International Symposium on 'Materials for the Third Millennium' Organised by The Indian Institute of Metals, Kanpur, India, 13 - 16 November 1999, pp.8-11

Effect of fluxes on metal recovery in secondary aluminium melting

53 rd Annual Technical Meeting and International Symposium on 'Materials for the Third Millennium' Organised by The Indian Institute of Metals, Kanpur, India, 13 - 16 November 1999, pp.4-7

Books & Book Chapters

Melt Cleaning Efficiency of Various Fluxes for A356 Alloy

in: Shape Casting. The Minerals, Metals & Materials Series, Tiryakioğlu M.,Griffiths W.,Jolly M, Editor, Springer, London/Berlin , Utah, pp.273-280, 2019

İmal Usulleri

Çağlayan Kitapevi, 1