Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of the influence of Fe2B layer thickness on the enhancement of tribological behavior of borided EN-GJL-250 cast iron: a comprehensive investigation under optimized lubrication

Charmati D., Tlili S., Touhami M., Bourebia M., KALELİ E. H.
International Journal of Advanced Manufacturing Technology , cilt.129, sa.9-10, ss.4605-4615, 2023 (SCI-Expanded) identifier

Mechanical properties and bio‑tribological performance of PVD (Ta/ ZrN)n multilayer coatings on UHMWPE in bovine serum lubrication

Ramoul C. E., Nouveau C., Beliardouh N. E., Kaleli E. H., Ali Ourdjini A., Ghelloudj O., et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.1, sa.22, ss.1-12, 2022 (SCI-Expanded) Creative Commons License

Synthesis and Tribocorrosion Performances of Multilayer (Ta/ZrN)n Coatings

Beliardouh N. E., Ramoul C. E., Nouveau C., Kaleli E. H., Montagne A.
Thin Solid Films , cilt.0040609022001043, sa.22, ss.1-36, 2022 (SCI-Expanded) Creative Commons License

Tribological and Antibacterial Properties of Polyetheretherketone Composites with Black Phosphorus Nanosheets

Xuhui S., Chengcheng Y., Lin Z., Jingcao C., Kaleli E. H., Guoxin X.
Polymers , cilt.14, sa.1242, ss.1-13, 2022 (SCI-Expanded) Creative Commons License

Tribological Performance Investigation of a Commercial Engine Oil Incorporating Reduced Graphene Oxide as Additive

Kaleli H., DEMİRTAŞ S., Uysal V., Karnis I., Stylianakis M. M., Anastasiadis S. H., et al.
NANOMATERIALS , cilt.11, sa.2, 2021 (SCI-Expanded) Creative Commons License identifier identifier identifier

Review of tribological behavior of graphene coatings on piston rings in engines

Karagoz Z. B. A., Demirtaş S., Kaleli H., Yüksek L., Citak E.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.72, sa.2, ss.243-254, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Modeling and theoretical analysis of a novel ratcheting-type cam-based infinitely variable transmission system

Al-Hamood A., Jamalia H., Imran A., Abdullah O., Senatore A., Kaleli H.
COMPTES RENDUS MECANIQUE , cilt.347, sa.12, ss.891-902, 2019 (SCI-Expanded) identifier identifier

Characterization of the friction and wear effects of graphene nanoparticles in oil on the ring/cylinder liner of internal combustion engine

DEMİRTAŞ S., Kaleli H., Khadem M., Kim D.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.71, sa.5, ss.642-652, 2019 (SCI-Expanded) identifier identifier

Tribotest of engine piston ring/cylinder liner pairs with different nanoparticles added into engine oil

DEMİRTAŞ S., KALELİ E. H., Khadem M., Kim D.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.72, sa.2, ss.217-231, 2018 (SCI-Expanded) identifier identifier

Thermal stress analysis of dry friction clutches

Abdullah O. I., Schlattmann J., Jobair H., Beliardouh N. E., Kaleli H.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.72, sa.2, ss.189-194, 2018 (SCI-Expanded) identifier identifier

Quantitative comparison of tribological performance of chromium- and zinc-phosphate-coated piston rings in tribotest rig

Ozkan D., Kaleli H., Yuksek L.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , cilt.231, ss.75-92, 2017 (SCI-Expanded) Creative Commons License identifier identifier

HISTORY OF OIL ADDITIVES FROM MACRO TO NANO SURFACE TRIBOLOGY IN TRIBOTEST RIGS AND INTERNAL COMBUSTION ENGINES

KALELİ E. H.
Journal of the Balkan Tribological Association , cilt.21, sa.3, 2015 (SCI-Expanded)

Surface and wear mechanisms analysis of phosphorous-free and conventional engine lubricants on cylinder liner and piston rings surfaces

Ozkan D., Kaleli H., Berthıer Y., Yüksek L.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.67, sa.5, ss.441-448, 2015 (SCI-Expanded) Creative Commons License identifier identifier

Surface and Wear Analysis of Zinc Phosphate Coated Engine Oil Ring and Cylinder Liner Tested with Commercial Lubricant

Özkan D., Kaleli H.
ADVANCES IN MECHANICAL ENGINEERING , 2014 (SCI-Expanded) identifier identifier

WEAR PERFORMANCE OF DUPLEX TREATED LOW ALLOYEDSTEEL AGAINST WOOD (BEECH)AS STATIC PARTNER

Beliardouh N. E., nouveau c., KALELİ E. H.
Journal Of The Balkan Tribological Association , cilt.20, sa.1, ss.84-82, 2014 (SCI-Expanded)

EFFECT OF LOAD, ROTATION SPEED AND SLIP RATIO ON THE WEAR BEHAVIOUR OF PVD-COATED HOTVAR STEEL UNDER LUBRICATING CONDITIONS

GERÇEKCİOĞLU E., Dagasan E., Kaleli H., Tugral F. A.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.18, sa.1, ss.69-79, 2012 (SCI-Expanded) identifier

CONDITION OF MONITORING PHOSPHOROUS-CONTAINING AND NPNA ENGINE OILS AND THEIR EFFECT ON THREE-WAY CATALYST

Kaleli H., Yüksek L., Hacıkadıroglu H.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.18, sa.3, ss.474-484, 2012 (SCI-Expanded) Creative Commons License identifier identifier

EFFECT OF ADDITIVE LEVEL ON THE SURFACE OF DIESEL ENGINE CYLINDER LINER

KALELİ E. H., Bektas D.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.17, sa.1, ss.139-150, 2011 (SCI-Expanded) identifier identifier

COMPARISON OF ADDITIVE PROTECTIVE LAYER ON THE CYLINDER LINER SURFACE USING DIESEL ENGINE AND PIN-ON-PLATE TEST RIGS

Bektas D., Kaleli H.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.17, sa.3, ss.411-425, 2011 (SCI-Expanded) identifier identifier

DETERMINATION OF OIL DRAIN PERIOD IN NAVAL SHIP DIESEL ENGINE

KALELİ E. H., Yildirim E.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.15, sa.4, ss.585-598, 2009 (SCI-Expanded) identifier identifier

Evaluation of Addirtive's Layer Formation in Engine Crankcase Oil Using Two Different Types of Tribologycal Test Rigs

Kaleli E. H.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.56, sa.3, ss.158-170, 2004 (SCI-Expanded)

Measurement of friction force and effects of oil fortifier in engine journal bearings under dynamic loading conditions

Durak E., Kurbanoglu C., Biyiklioglu A., Kaleli H.
TRIBOLOGY INTERNATIONAL , cilt.36, ss.599-607, 2003 (SCI-Expanded) identifier identifier

Engine emissions and poisoning effect of additives in synthetic oils on catalytic converter using an engine dynamometer

KALELİ E. H.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.55, sa.4, ss.162-177, 2003 (SCI-Expanded)

Effects of boron oil fortifier on friction and pressure distribution in engine journal bearings

KALELİ E. H., Durak E.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.55, ss.121-127, 2003 (SCI-Expanded) identifier identifier

Engine emissions and poisoning effect of synthetic oil's additives on catalytic converter using an engine dynamometer

Kaleli H.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.55, sa.4, ss.162-177, 2003 (SCI-Expanded) identifier identifier

The impact of crankcase oil containing phosphorus on catalytic converters and engine exhaust emissions

KALELİ E. H.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.53, sa.6, ss.237-255, 2001 (SCI-Expanded) identifier identifier

Protective effect of commercial oil fortifier in fully-formulated crankcase oils

KALELİ E. H.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.53, sa.1, ss.10-21, 2001 (SCI-Expanded) identifier identifier

Emission of phosphorus-containing and phosphorus-free fully formulated crankcase oil using an engine dynamometer

Kaleli H., Khorramian B.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.24, ss.137-156, 2000 (SCI-Expanded) identifier identifier

Effect of lubricant additives on the transition pressure from mild to severe wear for grey cast iron sliding pairs

Kaleli H., Eyre T., Ghasripoor F.
Wear , cilt.208, ss.1-10, 1997 (SCI-Expanded) Creative Commons License identifier identifier

Oil ageing - Drain period in a petrol engine

Kaleli H., Yavasliol I.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.49, sa.3, ss.120-127, 1997 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Otomobillerde Kullanılan Ticari Yağ Katkı Maddesinin Sürtünmeye Etkisinin Deneysel Analizi

ŞİMŞEK M., NTEZIYAREMYE Ö. S., KALELİ E. H., TUNAY R. F., DURAK E.
Politeknik Dergisi , cilt.27, sa.3, ss.921-929, 2024 (ESCI) Creative Commons License identifier

Tribological Investigation of The Effect of Aluminum Alloy in Accordance with Cast Iron Liner on Engine Wear

Kaleli E. H., Ocak B.
TRIBOLOGY IN INDUSTRY , cilt.45, sa.2, ss.285-293, 2023 (Scopus) Creative Commons License

Experimental investigation of the effect of tribological performance of reduced graphene oxide additive added into engine oil on gasoline engine wear

Kaleli E. H., Demirtaş S.
LUBRICATION SCIENCE , cilt.1627, ss.1-26, 2022 (Scopus) Creative Commons License identifier identifier

Numerical analysis of cam and follower based on the interactive design approach

Al-Hamood A., Jamali H. U., Abdullah O. I., Senatore A., Kaleli H.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM , cilt.13, ss.841-849, 2019 (Hakemli Dergi) identifier identifier

Application of Suspended Nanoboric Acid as an Efficient Lubrication Additive in Engine Oil

KALELİ E. H., DEMİRTAŞ S., Uysal V., TANRISEVEN Z., ZHAO J.
Key Engineering Materials , cilt.823, ss.53-60, 2019 (Scopus) identifier

Tribological Properties of New Developed Nano Boric Acid Suspended as Additive in Engine Oil

Kaleli E. H., Demirtaş S., Uysal V., Tanriseven Z.
Key Engineering Materials , sa.823, ss.41-52, 2019 (Scopus) identifier

Thermal treatment effect on tribological and corrosion performances of 13cr5ni2mo super-martensitic stainless steel

Tlili S., Beliardouh N. E., Ramoul C., Bahi R., Abdullah O., Kaleli H., et al.
Tribology in Industry , cilt.40, sa.3, ss.433-439, 2018 (Scopus) Creative Commons License identifier

New Universal Tribometer as Pin or Ball on Disc and Reciprocating Pin on Plate Types

KALELİ E. H.
Tribology in Industry , cilt.38, sa.2, ss.235-240, 2016 (Scopus) identifier

DESIGN OF MODERN UNIVERSAL TRIBOMETER WITH ROTATING AND RECIPROCATING MOVEMENT

KALELİ E. H.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.33, sa.1, ss.78-84, 2015 (ESCI) identifier

The Effect and Comparison of Biodiesel Diesel Fuel on Crankcase Oil Diesel Engine Performance

Yüksek L., Özener O., Berk Ö., Kaleli E. H.
FME TRANSACTIONS , cilt.37, sa.2, ss.91-97, 2009 (ESCI) Creative Commons License Sürdürülebilir Kalkınma identifier

The Effect and Comparison ofBiodiesel-Diesel Fuel on Crankcase Oil,Diesel Engine Performance andEmissions

YÜKSEK L., KALELİ E. H., ÖZENER O., Özoğuz B.
FME TRANSACTIONS , cilt.37, sa.2, ss.91-97, 2009 (ESCI)

The Effect and Comparison of Biodiesel-Diesel Fuel on Crankcase Oil, Diesel Engine Performance and Emissions

Yüksek L., Kaleli E. H., Özener O., Berk Ö.
FME TRANSACTIONS , cilt.37, sa.2, ss.91-97, 2009 (ESCI) identifier

Used Oil Analysis and Study of Oil Drain Period in Gasoline Engine

KALELİ E. H.
Society Automotive Engineers , cilt.981448, ss.91-104, 1998 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Nano Tribology of Nano Particles added in Engine Oil and Nano Coatings of Piston Rings-Cylinder Liners in Internal Combustion Engines

KALELİ E. H.
6th International Conference and Exhibition on Automobile Mechanical Engineering, Zürich, İsviçre, 8 - 09 Temmuz 2019

3D Digital Microscopic Examination of Graphene Coated Engine Cylinder Liner Surface

Ağaçdelen Z., KALELİ E. H., Uysal V., Çıtak e.
Automobile 2019 6th International Conference and Exhibition on Automobile Mechanical Engineering, Zürich, İsviçre, 8 - 09 Temmuz 2019

Effects of NBA nanoparticle as lubricant additives on friction and wear behaviour in Diesel Engine at Macro and Nanoscale

KALELİ E. H., DEMİRTAŞ S., Uysal V., TANRISEVEN Z.
APM 2019 International Conference on Advancements in Polymeric Materials Innovations in Polymeric Product Development and Manufacturing, Chennai, Hindistan, 22 - 24 Ocak 2019

Is the Coating of Graphene Oxide Effective to Protect Cylinder Liner Surface?

Uysal V., KALELİ E. H., ÖKTEM A. S., Topaç E.
APM 2019 International Conference on Advancements in Polymeric Materials Innovations in Polymeric Product Development and ManufacturingCentral, Chennai, Hindistan, 22 - 24 Ocak 2019

Application of Suspended Nanoboric Acid as an Efficient Lubrication Additive in Engine Oil

KALELİ E. H., DEMİRTAŞ S., TANRISEVEN Z., ZHAO J.
International Conference on Engineering Tribology and Applied Technology” (ICETAT 2018), Taipei, Tayvan, 16 - 18 Kasım 2018

Tribological Properties of New Developed Nano boric Acid Suspended as Additive in Engine Oil

KALELİ E. H., DEMİRTAŞ S., TANRISEVEN Z.
International Conference on Engineering Tribology and Applied Technology” (ICETAT 2018), Taipei, Tayvan, 16 - 18 Kasım 2018

Metrological Characterisation of Metallic Implant Surfaces Coated by Electron Beam Deposition of Bioglass

SAĞBAŞ B., KALELİ E. H., YÜCEL S.
2nd International Conference on Tribology, Turkeytrib’18, İstanbul, Türkiye, 18 - 20 Nisan 2018

The friction and wear characteristics of graphene coating by the CVD process on piston rings under tribo and engine testing conditions.

KALELİ E. H., YÜKSEK L., Çıtak E.
The 6th World Tribology Congress, Pekin, Çin, 17 Eylül 2017, ss.1

Characterization of Graphene Nanoplates in the Oil in terms of Friction and Wear for Internal Combustion Engine’s Piston Ring/Cylinder Liner

KALELİ E. H., SANER OKAN B.
ITS-IFToMM 2017, Jeju-Si, Güney Kore, 19 - 22 Mart 2017, ss.11-12

Surface Coating of Monolayer Graphene on Piston Ring for Internal Combustion Engines

Çıtak E., KALELİ E. H., KARAMAN M., ERSÖZ M.
Automobile 2016, Valencia, İspanya, 1 - 02 Aralık 2016

Characterization Of Wear Mechanisms Occurring On Piston Ring And Cylinder Bore Of The Internal Combustion Engine

DEMİRTAŞ S., KALELİ E. H.
2nd International Conference and Exhibition on Automobile Engineering, Valencia, İspanya, 01 Aralık 2016, ss.53

Layer Protection of Oil Additives Lubrication Friction Wear within Surface Coatings of Piston Rings against Cylinder Liner in Internal Combustion Engines

KALELİ E. H.
Automobile 2016, Valencia, İspanya, 1 - 02 Aralık 2016

Tribological Characterization of Engine Oil Additives with Nitrated Coated Piston Rings under Tribo and Engine Testing Conditions

KALELİ E. H., Kchaou M.
International Conference on Engineering Tribology and Applied Technology” (ICETAT 2016), Taipei, Tayvan, 4 - 06 Kasım 2016

Is Abrasive Wear Common Mechanism of Piston Ring and Cylinder Liner Rubbed Surfaces?

DEMİRTAŞ S., KALELİ E. H.
AAT 2016, İstanbul, Türkiye, 11 Ekim 2016, ss.333

Tribological Behaviorof Uncoated and Graphene Graphite Coated Piston Rings atNano and Macro Scale

ÖZKAN D., KALELİ E. H., YÜKSEK L., YAĞCI M. B., Özgür B.
WE-Heraeus-Seminer on Mechanisms of Tribology, Bonn, Almanya, 29 Mart - 01 Nisan 2016

TRIBOLOGICAL BEHAVIOUR OF CHROMIUM COATED AND UNCOATED PISTON RINGS SLIDING AGAINST CYLINDER LINERS

Sellami A., Kchaou M., Trabelsi M., Riadh R., Özkan D., KALELİ E. H., et al.
ICAMEM 2015 Sixth International Conference on Advances in Mechanical Engineering and Mechanics, 20 - 22 Aralık 2015

Tribotest and Engine Experiments of Crankcase Oil Additives to Obtain Protective Tribofilm Formation Between Rubbing Surfaces

KALELİ E. H.
ICAMEM 2015 Sixth International Conference on Advances in Mechanical Engineering and Mechanics, Hammamet, Tunus, 20 - 22 Aralık 2015

SLIDING WEAR BEHAVIOR OF MAGNETRON SPUTTERED CHROMIUM CARBIDE THIN FILMS

BELIARDOUH N. E., NOUVEAU C., KALELİ E. H.
TURKEYTRIB’15-1st INTERNATIONAL CONFERENCE ON TRIBOLOGY 7 – 9 October 2015, Yıldız Technical University, İSTANBUL - TURKEY, İstanbul, Türkiye, 7 - 09 Ekim 2015

OPTICAL NANOSCOPIC METHODS TO COMPARE LAYER AND ADHESIVE FORCE OF OIL ADDITIVES ON THE RUBBED SURFACES

KALELİ E. H., Özkan D.
BULTRIB’15 11th International Conference On Tribology 11-13 September 2015, Sozopol, Bulgaria, Sozopol, Bulgaristan, 11 - 13 Eylül 2015, ss.20

NEW UNIVERSAL TRIBOMETER AS PIN OR BALL ON DISC AND RECIPROCATING PIN ON PLATE TYPES

KALELİ E. H.
SERBIATRIB ’15-14th International Conference onTribology, Belgrade, Sırbistan Ve Karadağ, 13 - 15 Mayıs 2015, ss.251-256

SURFACE ANALYSIS OF ZINC PHOSPHATE COATING AND ZNDTP CONTAINING COMMERCIAL LUBRICANT ON ENGINE OIL RING AND CYLINDER LINER

KALELİ E. H., YÜKSEK L., ÖZKAN D.
International Conference BULTRIB 2013 & CEEPUS Workshop 2013., 1 - 03 Eylül 2013

Characterization of Additives Layer Thickness in Engine Crankcase Oil Between Sliding Pairs

KALELİ E. H.
Proceedings of World Tribology Congress 2009, WTC IV in Kyoto, 06-11 September 2009, Japanese Society of Tribologists Science Council of Japan, 01 Eylül 2009

The Effect and Comparison of Biodiesel-Diesel Fuel on Crankcase Oil, Diesel Engine performance and Emissions

KALELİ E. H.
11th International Conference on Tribology, Belgrade, SERBIATRIB09, 01 Mayıs 2009

Tribomechanical-Chemical Effects and Visualisation of Additives Layer Formation in Engine Crankcase Oil Between Sliding Pairs

KALELİ E. H.
Proceedings of WTC2005 World Tribology Congress III September 12-16, 2005, Washington, D.C., USA, 01 Eylül 2005

Kullanılmış Motor Yağlarının Geri Kazanım Yöntemleri ve Ekonomik Değerlendirilmesi

KALELİ E. H.
TMMOB Makine Mühendisleri Odası, VIII. Otomotiv ve Yan Sanayii Sempozyumu 17-18 Ekim 2003, Hotel Almira-Bursa, 01 Ekim 2003

Experimental Engine with Flexible Otto or Diesel Cycle (VCR-Variable Compression Ratio)

KALELİ E. H.
Proceedings of the 6th International Conference and Exhibition, Innovative Automotive Technology IAT '03, 24.-25. april 2003 Koper/Portoroz, Slovenia, 01 Nisan 2003

Effect of Friction, Wear and Layer Protection of Oil Fortifiers Added into Crankcase Oils in an Internal Combustion Engine's Journal Bearings

KALELİ E. H.
4th International Conference on Tribology, June 12-14 2002, 01 Haziran 2002

Motor Yağları ve Katkıları

KALELİ E. H.
TMMOB Makine Mühendisleri Odası, VII. Otomotiv ve Yan Sanayi Sempozyumu 26-27 Ekim 2001, Hotel Almira-Bursa, 01 Ekim 2001

Study of Friction and Wear Characteristics of Phosphorus and Phosphorus-Free Crankcase Oils

KALELİ E. H.
International Conference on Lubrication Techniques, 27-28 October 1999, 01 Ekim 1999

Oxidation Stability of Some Phosphorus-Free Fully Formulated Crankcase Oils

KALELİ E. H.
International Fall Fuels and Lubricants Meeting and Exposition, October 1998, San Francisco, CA, USA, Session: Passenger Car Lubricants (Part 3), 01 Ekim 1998

İçten Yanmalı Motorlarda Motor Çalışma Şartlarının Aşınmaya Etkileri

KALELİ E. H.
Yıldız Teknik Üniversitesi Fen Bilimleri Enstitüsü, I. Bilimsel Öğrenci Kurultayı, 01 Mayıs 1994 Sürdürülebilir Kalkınma

Metrikler

Yayın

78

Atıf (WoS)

80

H-İndeks (WoS)

5

Atıf (Scopus)

264

H-İndeks (Scopus)

9

Proje

7

Açık Erişim

12
BM Sürdürülebilir Kalkınma Amaçları