Prof. Ahmet KARAASLAN

Materials Chemistry and Physics, vol.284, 2022 (Journal Indexed in SCI)

Microstructure, mechanical and corrosion properties of nickel superalloy weld metal

Kisasoz A. , TÜMER M., KARAASLAN A.

MATERIALS TESTING, vol.63, no.10, pp.895-900, 2021 (Peer-Reviewed Journal)

INVESTIGATION OF THE EFFECTS OF DIFFERENT RETROGRESSION AND RE-AGING PARAMETERS APPLIED TO THE 7075 ALLOY ON THE MICRO-ARC OXIDATION PROCESS

Yilmaz M. S. , Ozer G., ŞAHİN O., KARAASLAN A.

SURFACE REVIEW AND LETTERS, vol.28, no.09, 2021 (Journal Indexed in SCI)

Microstructure, wear and corrosion characteristics of multiple-reinforced (SiC-B4C-Al2O3) Al matrix composites produced by liquid metal infiltration

Öztürk K., Gecü R., Karaaslan A.

CERAMICS INTERNATIONAL, vol.47, no.13, pp.18274-18285, 2021 (Peer-Reviewed Journal)

A Study on the Effects of Different Heat Treatment Parameters on Microstructure-Mechanical Properties and Corrosion Behavior of Maraging Steel Produced by Direct Metal Laser Sintering (DMLS)

Özer G., Karaaslan A.

Steel Research International, vol.91, no.10, pp.1-8, 2020 (Journal Indexed in SCI Expanded)

Casting temperature dependent wear and corrosion behavior of 304 stainless steel reinforced A356 aluminium matrix bimetal composites fabricated by vacuum-assisted melt infiltration casting

Gecü R. , Karaaslan A.

WEAR, vol.446, 2020 (Journal Indexed in SCI)

Influence of the phase balance and cooling conditions on the microstructure and corrosion behavior of solution-treated 1.4462 duplex stainless steel

Yalçıner G., Özer G., Kısasöz A. , Karaaslan A.

MATERIALS RESEARCH EXPRESS, vol.6, no.12, 2019 (Journal Indexed in SCI)

Effect of RRA heat treatment on corrosion and mechanical properties of AA7075

Özer G., Karaaslan A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, vol.70, no.11, pp.2064-2072, 2019 (Journal Indexed in SCI)

Cooling slope casting of AA7075 alloy combined with reheating and thixoforging

Güler K. A. , Kısasöz A., Ozer G., Karaaslan A.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, vol.29, pp.2237-2244, 2019 (Peer-Reviewed Journal)

Effect of secondary phases on 475 °c embrittlement of 1.4462 and 1.4501 duplex stainless steels at short-term heat treatment conditions

KISASÖZ A., Ozer G., KARAASLAN A.

Materials Research Express, vol.6, no.11, 2019 (Peer-Reviewed Journal)

Effects of retrogression and reaging heat treatment on the microstructure, exfoliation corrosion, electrical conductivity, and mechanical properties of AA7050

Özer G., Kaya I., Karaaslan A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, vol.70, no.10, pp.1788-1797, 2019 (Journal Indexed in SCI)

Investigation of the relationship between intergranular corrosion and retrogression and reaging in the AA6063

Ozer G., KISASÖZ A., KARAASLAN A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, vol.70, no.12, pp.2256-2265, 2019 (Peer-Reviewed Journal)

Sliding Wear of the Ti-Reinforced Al Matrix Bi-metal Composite: A Potential Replacement to Conventional SiC-Reinforced Composites for Automotive Application

INTERNATIONAL JOURNAL OF METALCASTING, vol.13, no.3, pp.641-652, 2019 (Journal Indexed in SCI)

Improving wear resistance of 304 stainless steel reinforced AA7075 aluminum matrix composite by micro-arc oxidation

GECÜ R. , Yurekturk Y., Tekoglu E., Muhaffel F., KARAASLAN A.

SURFACE & COATINGS TECHNOLOGY, vol.368, pp.15-24, 2019 (Journal Indexed in SCI)

The effect of retrogression and re-aging treatment on mechanical and tribological features of AA7075 aluminium alloyEinfluss der Retrogressions- und Reaging-Behandlung auf die mechanischen und tribologischen Eigenschaften der Aluminiumlegierung AA7075

Ozer G., GECÜ R. , KARAASLAN A.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, vol.50, no.6, pp.761-768, 2019 (Journal Indexed in SCI)

A Comparative Study on Titanium-Reinforced Aluminium Matrix Composites Produced by Melt Infiltration Casting and Squeeze Infiltration

INTERNATIONAL JOURNAL OF METALCASTING, vol.13, no.2, pp.311-319, 2019 (Journal Indexed in SCI)

Microstructural and Tribological Characterization of Stainless Steel-Reinforced Aluminum Matrix Bimetal Composites Produced at Various Mold Burnout Temperatures

Öztürk K. , Gecü R. , Karaaslan A.

TRIBOLOGY TRANSACTIONS, vol.62, no.2, pp.249-261, 2019 (Journal Indexed in SCI)

Effects of RRA heat treatment on the exfoliation corrosion (EXCO), intergranular corrosion (IGC), and electrical conductivity of AA7075 alloy

Ozer G., Karaaslan A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, vol.70, no.3, pp.549-557, 2019 (Journal Indexed in SCI)

Volume Fraction Dependent Wear Behavior of Titanium-Reinforced Aluminum Matrix Composites Manufactured by Melt Infiltration Casting

GECÜ R., KARAASLAN A.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, vol.141, no.2, 2019 (Peer-Reviewed Journal)

Preform-Based Production of Al2O3-Reinforced Aluminium Matrix Composites by Using Various Modification Techniques

Metals and Materials International, 2019 (Journal Indexed in SCI)

Etching behavior of ZnO:Ga thin films

Duygulu N. , MUSTAFAOĞLU U., KODOLBAŞ A. O. , KARAASLAN A.

MATERIALS TESTING, vol.60, no.11, pp.1097-1103, 2018 (Journal Indexed in SCI)

A Study on Al/Cu Bimetal Production by Lost Foam Casting

ACAR S. , GECÜ R. , KISASÖZ A. , GÜLER K. A. , KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, vol.55, no.11, pp.728-740, 2018 (Journal Indexed in SCI)

Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by thixoforging combined with low superheat casting

GECÜ R. , ACAR S. , KISASÖZ A. , ALTUG GULER K. A. , KARAASLAN A.

Transactions of Nonferrous Metals Society of China (English Edition), vol.28, no.3, pp.385-392, 2018 (Journal Indexed in SCI)

Relationship Between Nanoindentation and Wear Properties of Stainless Steel-Reinforced Aluminium Matrix Composite

GECÜ R. , ATAPEK Ş. H. , KARAASLAN A.

TRIBOLOGY LETTERS, vol.65, no.4, 2017 (Journal Indexed in SCI)

Properties of AA7075 aluminum alloy in aging and retrogression and reaging process

ÖZER G., KARAASLAN A.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, vol.27, no.11, pp.2357-2362, 2017 (Peer-Reviewed Journal)

Influence of preform preheating on dry sliding wear behavior of 304 stainless steel reinforced A356 aluminum matrix composite produced by melt infiltration casting

TRIBOLOGY INTERNATIONAL, vol.115, pp.608-618, 2017 (Journal Indexed in SCI)

Relationship of RRA heat treatment with exfoliation corrosion, electrical conductivity and microstructure of AA7075 alloy

Özer G. , KARAASLAN A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, vol.68, no.11, pp.1260-1267, 2017 (Journal Indexed in SCI)

Investigation of spherisation in microstructures of aluminium casting alloys for thixoforging process

GÜLER K. A. , GECÜ R. , KISASÖZ A. , KARAASLAN A.

RUSSIAN JOURNAL OF NON-FERROUS METALS, vol.58, no.5, pp.489-494, 2017 (Journal Indexed in SCI)

DOUBLE FILLET WELDING OF CARBON STEEL T-JOINT BY DOUBLE CHANNEL SHIELDING GAS METAL ARC WELDING METHOD USING METAL CORED WIRE

MERT T. , GÜLTEKİN N. , KARAASLAN A.

ARCHIVES OF METALLURGY AND MATERIALS, vol.62, no.2, pp.947-954, 2017 (Journal Indexed in SCI)

Effect of Water Storage on The Mechanical Properties of Zinc Polycarboxylate Cements

HAZAR A. B. , KARAASLAN A.

Digest Journal Of Nanomaterials And Biostructures, vol.2, no.2, pp.243-252, 2017 (Journal Indexed in SCI Expanded)

Influence of Orbital Shaking on Microstructure and Mechanical Properties of A380 Aluminium Alloy Produced by Lost Foam Casting

KARAASLAN A. , KISASÖZ A. , ATAPEK Ş. H. , GÜLER K. A.

RUSSIAN JOURNAL OF NON-FERROUS METALS, vol.58, no.3, pp.238-243, 2017 (Journal Indexed in SCI)

The Effect of RRA Heat Treatment on the Intergranular Corrosion (IGC) of the AA7075 Alloy

Özer G. , KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, vol.54, no.4, pp.256-266, 2017 (Journal Indexed in SCI)

EFFECT OF ETCHING METHODS IN METALLOGRAPHIC STUDIES OF DUPLEX STAINLESS STEEL 2205

KISASÖZ A., KARAASLAN A., BAYRAK Y.

METAL SCIENCE AND HEAT TREATMENT, vol.58, pp.704-706, 2017 (Peer-Reviewed Journal)

A Comparative Study on the Microstructure Evaluation of Thixoforged A356 and A380 Aluminium Alloys

GÜLER K. A. , GECÜ R. , KISASÖZ A. , KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, vol.54, no.3, pp.163-177, 2017 (Journal Indexed in SCI)

Characteristics of austenitic stainless steel T-joints welded using the DMAG process with solid wire

MERT T., Gültekin N., KARAASLAN A.

MATERIALS TESTING, vol.58, no.9, pp.778-781, 2016 (Peer-Reviewed Journal)

Dry Sliding Wear Behavior of Cast A7075 and A7075/SAF 2205 Composite Material

HIGH TEMPERATURE MATERIALS AND PROCESSES, vol.35, no.5, pp.487-492, 2016 (Journal Indexed in SCI)

Effect of Annealing Time and Cooling Rate on Precipitation Processes in a Duplex Corrosion-Resistant Steel

KISASÖZ A. , Gurel S., KARAASLAN A.

METAL SCIENCE AND HEAT TREATMENT, vol.57, pp.544-547, 2016 (Journal Indexed in SCI)

Evaluation of double channel GMAW fillet welds of low carbon steel using solid wire

MERT T., Gultekin N., KARAASLAN A.

MATERIALS TESTING, vol.57, pp.680-684, 2015 (Peer-Reviewed Journal)

A study of expanded polyethylene (EPE) pattern application in aluminium lost foam casting

GÜLER K. A. , KISASÖZ A., KARAASLAN A.

RUSSIAN JOURNAL OF NON-FERROUS METALS, vol.56, no.2, pp.171-176, 2015 (Journal Indexed in SCI)

Mechanical and Microstructural Evaluation of DMAG Welding of Structural Steel

MERT T., Gultekin N., KARAASLAN A.

ADVANCES IN MECHANICAL ENGINEERING, vol.7, no.1, 2015 (Peer-Reviewed Journal)

Fillet welding of austenitic stainless steel using the double channel shielding gas method with cored wire

MERT T., Gultekin N., KARAASLAN A.

MATERIALS TESTING, vol.57, no.1, pp.91-94, 2015 (Peer-Reviewed Journal)

Investigation of Al/Steel Bimetal Composite Fabrication by Vacuum Assisted Solid Mould Investment Casting

ACTA PHYSICA POLONICA A, vol.126, no.6, pp.1327-1330, 2014 (Peer-Reviewed Journal)

Fabrication of Al/Mg bimetal compound casting by lost foam technique and liquid-solid process

GÜLER K. A. , KISASÖZ A., KARAASLAN A.

Materialpruefung/Materials Testing, vol.56, no.9, pp.700-702, 2014 (Peer-Reviewed Journal)

Investigation of lost foam casted aluminum bimetal microstructures

Materialpruefung/Materials Testing, vol.56, no.9, pp.737-740, 2014 (Journal Indexed in SCI)

Finite Element Analysis of 2205 Duplex Stainless Steel Welds

MATERIALS TESTING, vol.56, no.10, pp.795-799, 2014 (Peer-Reviewed Journal)

Effects of pattern coating and vacuum assistance on porosity of aluminium lost foam castings

KISASÖZ A. , TOPTOP G., KARAASLAN A.

Russian Journal of Non-Ferrous Metals, vol.55, no.5, pp.424-428, 2014 (Journal Indexed in SCI)

Effects of alloying elements with various heat treatment processes on the properties of high speed steels

Kovove Materialy, vol.51, no.3, pp.205-209, 2013 (Journal Indexed in SCI)

The fabrication and characterization of Al/SiC-MMC castings produced by vacuum assisted solidmould investment casting process

Guler K. A. , KISASÖZ A. , KARAASLAN A.

RUSSIAN JOURNAL OF NON-FERROUS METALS, vol.54, no.4, pp.320-324, 2013 (Journal Indexed in SCI)

Effect of Alloying Elements on the Tooling Capabilities of High Speed Steels Fabricated by Powder Metallurgy

Toptop G. O. , KISASÖZ A. , KARAASLAN A.

MATERIALS TESTING, vol.55, no.1, pp.43-46, 2013 (Journal Indexed in SCI)

Infiltration of A6063 aluminium alloy into SiC-B4C hybrid preforms using vacuum assisted block mould investment casting technique

TOPTOP G. O. , KISASÖZ A., KARAASLAN A.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, vol.22, no.7, pp.1563-1567, 2012 (Journal Indexed in SCI)

Mechanical properties of A6063/ SiC composites produced using the lost foam casting process

Güler K. A. , Kisasoz A., Yuksel C., Karaaslan A.

Materialpruefung/Materials Testing, vol.54, no.3, pp.189-192, 2012 (Peer-Reviewed Journal)

Effects of Co as an alloying element and heat treatment processes on the properties of high speed steels

Materialpruefung/Materials Testing, vol.54, no.6, pp.427-430, 2012 (Peer-Reviewed Journal)

Influence of heat treatment and thermochemical processes on the properties of the steel X 38 CrMoV 5 3

Kisasoz A. , Karaaslan A.

Materialpruefung/Materials Testing, vol.54, no.2, pp.103-107, 2012 (Journal Indexed in SCI)

A novel method for Al/SiC composite fabrication: Lost foam casting

Kisasoz A. , Güler K. A. , Karaaslan A.

International Journal of Materials Research, vol.102, no.3, pp.304-308, 2011 (Journal Indexed in SCI)

Fabrication and characterization of SiC preforms for metal matrix composites

Materialpruefung/Materials Testing, vol.53, pp.54-57, 2011 (Journal Indexed in SCI)

Processing and microstructural characterisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites

Toptan F., Kilicarslan A. , Karaaslan A. , Çiğdem M. , Kerti I.

MATERIALS & DESIGN, vol.31, 2010 (Journal Indexed in SCI)

Formation of the Stress-Relieved Structure in the Welded Region of Gas Tungsten Arc Welded Armor Steel with the Help of Heat Distrubution

KARAASLAN A., Akça C.

METAL SCIENCE AND HEAT TREATMENT, vol.51, no.11, pp.585-588, 2009 (Peer-Reviewed Journal)

Formability Characteristics of Industrial Pure Aluminum at Casting and Room Temperature

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION, vol.51, no.4, pp.234-237, 2009 (Peer-Reviewed Journal)

Production of a Glass Fiber Reinforced Polymer Matrix Composite by Injection Moulding and its Characterization

KARAASLAN A. , Sabancı S., Atapek H.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION, vol.51, no.4, pp.215-218, 2009 (Journal Indexed in SCI)

The Effect of Austempering Time on Heat Affected Zone in Gas Tungsten Arc Welding of Unalloyed Austempered Ductile Iron

KARAASLAN A. , AKÇA C.

METALL, vol.5, pp.295-297, 2008 (Journal Indexed in SCI Expanded)

Einfluss von Zusatzwerkstoffe auf die Schweissbarkeit von der Aluminiumlegierung AlZnMg beim Wolfram-Inertgasschweissen

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, vol.45, no.2, pp.86-91, 2008 (Journal Indexed in SCI Expanded)

Tensile Strength and Impact Toughness of an AA 7075-T6 Alloy Effects of Aging Temperature and Time During Retrogression Treatment

KARAASLAN A. , Kaya I., Atapek H.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION, vol.50, no.5, pp.256-258, 2008 (Journal Indexed in SCI)

Characterization of the Heat Affected Zone in Gas Tungsten Arc Welds of Unalloyed Austempered Ductile Iron

KARAASLAN A. , Akca C.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION, vol.50, no.5, pp.264-267, 2008 (Journal Indexed in SCI)

Crack Avoidance by Using Titanium as Filler Material for Laser Welding of a Chromium Steel with a Nickel Alloy

Karaaslan A.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION, vol.50, no.5, pp.268-271, 2008 (Journal Indexed in SCI)

Effect of aging temperature and of retrogression treatment time on the microstructure and mechanical properties of alloy AA 7075

KARAASLAN A. , Kaya I., Atapek H.

METAL SCIENCE AND HEAT TREATMENT, vol.49, pp.443-447, 2007 (Journal Indexed in SCI)

Einfluss des Laserverfahrens auf Geometrie der Spuren beim Laserschweissen von Ni-Resist-Sphaeroguss mit hitzebestaendigem Stahl

METALS, vol.7, pp.477-478, 2007 (Refereed Journals of Other Institutions)

Crack avoidance during powder metallurgy of a SiC particel reinforced aluminium alloy A 6063

KARAASLAN A. , Lus M.

MATERIALPRUFUNG, vol.49, pp.603-605, 2007 (Journal Indexed in SCI)

Modellierung der mikrostrukturellen Aenderungen in heterogenen Verbindungen

MATERIALPRUFUNG, vol.48, no.11, pp.553-555, 2006 (Journal Indexed in SCI Expanded)

Wolfram-Inertgasschweißen der Aluminiumlegierung AlMgSi1 mit und ohne Zusatzwerkstoff

MATERIALPRUFUNG, vol.48, no.5, pp.207-210, 2006 (Peer-Reviewed Journal)

Influence of cold work and plate thickness on the gas-tungsten arc weldability of commercially pure aluminium

MATERIALPRUFUNG, vol.48, no.4, pp.152-155, 2006 (Journal Indexed in SCI)

Schweißen von Reintitanblechen: Laserstrahlschweissen und WIG-Schweissen von kommerziellen Reintitanblech

MATERIALPRUFUNG, vol.46, no.9, pp.452-454, 2004 (Journal Indexed in SCI Expanded)

Schweißen von technisch reinem Titan: WIG-Schweissen mit der Titanlegierung TiAl6V4

MATERIALPRUFUNG, vol.46, no.9, pp.449-451, 2004 (Journal Indexed in SCI Expanded)

Laserlegieren von Schnellarbeitstaehlen, Durch die Waermebehandlung bedingte Eigenschaftsaenderungen von laserlegierten Schnellarbeitstaehlen

MATERIALPRUFUNG, vol.46, no.3, pp.102-105, 2004 (Journal Indexed in SCI Expanded)

Joinning of S 6-5-2 and 4140 steel with flash welding

Journal of Technical University of Gabrovo, vol.27, pp.31-35, 2003 (Journal Indexed in SCI Expanded)

Examining the changes of hardness of different materials joined by laser beam

Journal of Technical University of Gabrovo, vol.27, pp.40-44, 2003 (Journal Indexed in SCI Expanded)

Heißrissbildung beim Schweißen: Charakterisiseren heterogener Lichtbogenschweißverbindungen

MATERIALPRUFUNG, vol.45, no.10, pp.452-454, 2003 (Journal Indexed in SCI Expanded)

Auswahl geeigneter Stabelektroden für Lichtbogenschweißen heterogener Verbindungen

Kısasöz A. , Guler K. A. , Karaaslan A.

STAHL UND EISEN, vol.123, no.9, pp.73-75, 2003 (Journal Indexed in SCI Expanded)

Articles Published in Other Journals

Determination of Temperature Gradient in TIG Welding of Duplex Stainless Steel

KISASÖZ A., GECÜ R., KARAASLAN A.

El-Cezerî Journal of Science and Engineering, vol.4, pp.593-597, 2017 (Peer-Reviewed Journal)

Aluminium Bimetal Structure Production by Lost Foam Casting with Liquid-Liquid Process

Machines, Technologies, Materials, vol.8, no.10, pp.43-46, 2014 (Refereed Journals of Other Institutions)

Metal Matrisli Kompozitlerin Vakum İnfiltrasyonla Dereceli Hassas Döküm Kalıplarında Üretimi

Güler K. A. , KARAASLAN A.

Metalurji, vol.170, pp.34-38, 2014 (National Non-Refereed Journal)

Dubleks Paslanmaz Çeliklerde Oluşan Yüksek Sıcaklık Fazlarına Genel Bir Bakış

KISASÖZ A. , KARAASLAN A.

Metalurji, vol.7, no.162, pp.57-61, 2012 (National Non-Refereed Journal)

Uzaktan Laser Sistemi İle Galvanizli Sacların Birleştirilmesinde Aralık Unsuru

Gedik Holding, vol.2, pp.50-53, 2009 (National Non-Refereed Journal)

Ergitme Kaynağında Katılaşma Mekanizmasının Kaynak Bölgesi Özelliklerine Etkisi

MetalMakina, vol.4, 2008 (National Non-Refereed Journal)

Düşük Alaşımlı Yüksek Hız Çeliklerinde Isıl İşlemler İle Özelliklerin Arttırılması

MetalMakina, vol.2, pp.68-72, 2007 (Non Peer-Reviewed Journal)

Yarı-Katı Fazda Magnezyum Üretimi

Metalurji Malzeme Dergisi, no.6, pp.58-61, 2006 (Other Refereed National Journals)

Östemperlenmiş Küresel Grafitli Dökme Demirin TIG Kaynak Yöntemi İle Birleşme Karakterizasyonu

Metal Makina, vol.7, pp.392-397, 2006 (National Non-Refereed Journal)

Kalıplarda Laser İle Yüzey Sertleştirme

Kalıp, vol.2, 2006 (National Non-Refereed Journal)

Sementasyon Çeliği (16 MnCr 5) İle Yapı Çeliğinin(St 37) TIG ve Elektrik Ark Kaynak Yöntemleriyle Birleştirilmesi

Metal Dünyası, vol.123, pp.72-75, 2003 (National Non-Refereed Journal)

TIG Kaynak Yöntemi İle St 37 / DDL 20 Malzeme Çiftinin Kaynak Kabiliyetinin Araştırılması

Metal Dünyası, vol.122, pp.109-111, 2003 (National Non-Refereed Journal)

Paslanmaz Çeliklerin Kaynağında Isıl İşlemin Etkileri

Metal Dünyası, vol.119, 2003 (National Non-Refereed Journal)

Laserschweisseignung des unlegierten Baustahls St 37

Schweiss- und Prüftechnik, vol.3, 2002 (Refereed Journals of Other Institutions)

Laseschweissen von Gusseisen mit hitzebestaendigem Stahl

KISASÖZ A. , KARAASLAN A.

Schweiss- und Prüftechnik, vol.11, 2000 (Refereed Journals of Other Institutions)

Refereed Congress / Symposium Publications in Proceedings

Influence of Heat Treatment of 1.4462 and 1.4501 Duplex Stainless Steels on Microstructure and Wear Resistance

YALÇINER G., GECÜ R. , KISASÖZ A. , KARAASLAN A.

20th International Metallurgy and Materials Congress, İstanbul, Turkey, 10 - 12 June 2021, pp.316

Prevention of Hot Crack Formation in 304 Stainless Steel Reinforced AA7075 Aluminium Matrix Bimetal Composites

Gecü R., Karaaslan A.

9th International Aluminium Symposium, İstanbul, Turkey, 10 - 11 October 2019, pp.34-38

EFFECTS OF RETROGRESSION AND REAGING (RRA) ON THE MECHANICAL AND PHYSICAL PROPERTIES IN ALUMINIUM ALLOYS 7050 AND 7075

Özer G., Kaya I., Karaaslan A.

9th International Aluminium Symposium , İstanbul, Turkey, 10 - 11 October 2019, pp.115-118

Production of Hybrid Reinforced AA7075 Matrix Composite with Investment Casting

Öztürk K., Karaaslan A.

9th International Aluminium Symposium, İstanbul, Turkey, 10 - 11 October 2019, pp.170-173

Effect of Micro Arc Oxidation (MAO) Parameters on Coating/Interface Behaviour of 7075-T6 Aluminium Alloy

Yılmaz M. S. , Özer G., Şahin O., Karaaslan A.

8th International Conference on Advanced Technologies (ICAT'19), Sarajevo, Bosnia And Herzegovina, 26 - 30 August 2019, pp.96-99

Çelik ile Farklı Malzeme Çiftlerinin Laser Kaynağı

Karaaslan A.

4th International Iron and Steel Symposium, Karabük, Turkey, 4 - 06 April 2019, pp.200

Electrochemical Corrosion Behavior of Solution Treated UNS32205 Duplex Stainless Steel

4th International Iron and Steel Symposium, Karabük, Turkey, 4 - 06 April 2019, pp.287-289

A Study on the Effects of Solution Heat Treatment Time on Eutectic Silicon Morphology for A380 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A. , KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.304-306

Effect of Preheating Treatment on Corrosion Behavior of AA6063 Alloy

CANBAY G., KISASÖZ A. , KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 October 2018, pp.291-293

Sliding Wear Characteristics of AISI 2205 Duplex Stainless Steel Cooled in Various Environments after Solution Treatment

GECÜ R., KISASÖZ A., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 October 2018, pp.837-840

The impact of volume fraction of commercially pure titanium reinforcement on aluminium matrix bimetal composite properties

GENÇER K., GECÜ R. , KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 October 2018, pp.148-151

Influence of Cooling Conditions on the Microstructure of G-NiCr28W

SALDUZ Y., BAŞARAN C., KISASÖZ A. , KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 October 2018, pp.294-296

Effect of Preform Binders on the Properties of AA7075 Matrix Composites

ÖZTÜRK K. , KISASÖZ A. , KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 October 2018, pp.265-268

Investigation of Microstructure and Corrosion Properties of the Inconel 625 Weld

TÜMER M., KISASÖZ A. , KARAASLAN A. , KERİMAK M.

5th International Conference on Welding Technologies and Exhibition, Sarajevo, Bosnia And Herzegovina, 26 September 2018, pp.273-277

TRIBOLOGICAL CHARACTERIZATION OF 304 STAINLESS STEEL REINFORCED AA7075 ALUMINIUM MATRIX COMPOSITE PRODUCED BY MELT INFILTRATION CASTING

ÖZTÜRK K. , KISASÖZ A. , KARAASLAN A.

2nd International Conference on Tribology, İstanbul, Turkey, 18 April 2018, pp.36-41

Fabrication of AA7075-SiCp Composite

1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 March 2018, pp.273

Investigation of the Effects of Solution Heat Treatmeant Time on the Eutectic Silicon for A356 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A. , KARAASLAN A.

2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Hungary, 07 March 2018, pp.268-272

The Effect of Preform Preheating on Microstructural and Mechanical Features of 80% CP-Ti Reinforced A356 Matrix Composite

DUYGULU N. , MUSTAFAOĞLU Ü., ERGÜNHAN B. H. , KODOLBAŞ A. O. , KARAASLAN A.

International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Hungary, 07 March 2018, pp.163-169

Dry Sliding Wear Properties of AA7075 Aluminium Matrix Hybrid Composites

GECÜ R. , ACAR S. , KISASÖZ A. , GÜLER K. A. , KARAASLAN A.

2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Hungary, 07 March 2018, pp.295-300

Influence of Doping Elements on Zinc Oxide Thin Films Deposited by Sputtering

DUYGULU N. , MUSTAFAOĞLU Ü., ERGÜNHAN B. H. , YILMAZ O., KODOLBAŞ A. O. , KARAASLAN A.

2017 ICG ANNUAL MEETING 32nd ŞİŞECAM GLASS SYMPOSIUM, 22 - 25 October 2017

Investigation the Influence of Doping Elements on Etched Zinc Oxide Thin Films Deposited By Sputtering Technique

KODOLBAŞ A. O. , MUSTAFAOĞLU Ü., ERGÜNHAN B. H. , DUYGULU N., YILMAZ O., TUNA Ö., et al.

2017 ICG ANNUAL MEETING 32nd ŞİŞECAM GLASS SYMPOSIUM, 22 - 25 October 2017

Etched Zinc Oxide Thin Films Deposited by Sputtering Technique

2017 ICG ANNUAL MEETING 32nd ŞİŞECAM GLASS SYMPOSIUM, 22 - 25 October 2017

Effect of Multipass Welding on Microstructure and Mechanical Properties of AISI 2205 Duplex Stainless Steel

KISASÖZ A. , TÜMER M., KARAASLAN A.

3rd International Iron & Steel Symposium, Karabük, Turkey, 03 April 2017, pp.66-68

Aging of A356 Aluminum Billets Produced by Semi-Solid Metal Processing

GECÜ R. , ACAR S. , KISASÖZ A. , GÜLER K. A. , KARAASLAN A.

3rd International Iron & Steel Symposium, Karabük, Turkey, 03 April 2017, pp.267-270

Determining the Corrosion Behaviour of EN 1.4462 Duplex Stainless Steel in FeCl3 Media for Various Solution Treatment Conditions

KISASÖZ A. , TÜFENK E., KARAASLAN A.

3rd International Iron & Steel Symposium, Karabük, Turkey, 03 April 2017, pp.201-203

Influence of Solution Heat Treatment at 1180°C on the Properties of 2.4879 Alloy

International Conference on Engineering Technology and Innovation, Sarajevo, Bosnia And Herzegovina, 22 March 2017, pp.166-169

Microstructural Evaluation of T6-Treated A380 Alloy Manufactured by Semi-Solid Metal Casting

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A. , KARAASLAN A.

International Conference on Engineering Technology and Innovation, Sarajevo, Bosnia And Herzegovina, 22 March 2017, pp.284-288

Production of CP-Ti Reinforced A356 Aluminum Composite by Vacuum-Assisted Investment Casting

International Conference on Engineering Technology and Innovation, Saraybosna, Bosnia And Herzegovina, 22 March 2017, pp.210-214

Variation of Microstructure and Mechanical Properties of 2205 Duplex Stainless Steel for Solution Treatment at 1150 °C

KOCATURK B., AKDOĞAN EKER A., MERT T., KÜÇÜKYILDIRIM B. O. , KARAASLAN A.

International Conference on Engineering Technology and Innovation, Sarajevo, Bosnia And Herzegovina, 22 March 2017, pp.170-174

EFFECTS OF LASER POWER AND WELDING SPEED ON THE REMOTE FIBER LASER WELDING OF THIN STEEL SHEETS USED IN THE AUTOMOTIVE INDUSTRY

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.1239-1246

Otomotiv Sektöründe Kullanılan Sacların Uzaktan Fiber Lazer Kaynağı İle Birleştirilmesinde Kaynak Gücü ve Hızının Nüfuziyete Etkisi

Kocatürk B., Akdoğan Eker A. , Mert T. , Küçükyıldırım B. O. , Karaaslan A.

16. Uluslararası Malzeme Sempozyumu (IMSP 2016), Denizli, Turkey, 12 October 2016, pp.1239-1246

Microstructural Evaluation of Thixoforged A380 Alloy Billets Produced by Low Superheat Casting Process

GÜLER K. A. , KISASÖZ A. , KARAASLAN A. , ÖZER G.

18th International Metallurgy & Materials Congress, İstanbul, Turkey, 29 September 2016, pp.659-662

An Investigation of the Effect of Solution Heat Treatment on 475 °C Embrittlement in 1.4462 Duplex Stainless Steels

GECÜ R. , KISASÖZ A. , KARAASLAN A.

18th International Metallurgy & Materials Congress, İstanbul, Turkey, 29 September 2016, pp.501-503

The Effect of Intermetallic Phases on Corrosion Behaviour of Duplex Stainless Steels

ZORBA A. P. , ÖZYILMAZ A. Ö. , GECÜ R. , KISASÖZ A. , KARAASLAN A.

18th International Metallurgy & Materials Congress, İstanbul, Turkey, 29 September 2016, pp.836-839

Manufacturing and Aging of 7075 Based Metal-Metal Composites by Using Sawdusts as Reinforcements

GECÜ R. , KISASÖZ A. , GÜLER K. A. , KARAASLAN A.

18th International Metallurgy & Materials Congress, İstanbul, Turkey, 29 September 2016, pp.114-117

Soğuk İş Takım Çeliklerinde Cr ve V İçeriğinin Malzeme Özellikleri Üzerindeki Etkisinin İncelenmesi

Kısasöz A. , KARAASLAN A.

5. Isıl İşlem Sempozyumu, 01 June 2016, pp.240-247

İnce Film Fotovoltaik Uygulamalar için Kimyasal Olarak Pürüzlendirilmiş Al Katkılı ZnO Filmlerin Özellikleri

Mustafaoğlu Ü., Evcimen Duygulu N., Kodolbaş A. O. , KARAASLAN A., Ekerim A.

01 March 2016, vol.45, pp.101-104 Sustainable Development

Hedef Altlık Mesafesinin Alüminyum Katkılı Çinko Oksit Filmler (ZnO:Al) Üzerindeki Etkisi

Top S., Evcimen Duygulu N., Kodolbaş A. O. , KARAASLAN A.

01 March 2016, vol.45, pp.142-145

Alçı Kalıba Döküm Yöntemi İle Üretilen Aa7075-A413 Bimetal Parçanın Özellikleri

YÜKSEL Ç., Kocabaş M., Gecü R., Erzi E., Dışpınar D., Güler K. A. , et al.

KompEGE, 01 November 2015, vol.1

Wear Behavior of Aged DIN 1.4462 Duplex Stainless Steels

Atapek H., KARAASLAN A.

International Conference of Engineering Against Failure, 01 June 2015, pp.121-128

Al-Si Kaplamalı Otomotiv Çeliklerinde Lazer Kaynaklı Birleştirme Uygulamaları

Sığırtmaç T., KARAASLAN A. , Kısasöz A.

01 May 2014

Ferritik-Östenitik Çeliklerde Sıcaklığın Mekanik Özellikler Üzerindeki Etkisinin Modellenmesi

KISASÖZ A. , KARAASLAN A.

10. Uluslararası Kırılma Konferansı, Kayseri, Turkey, 24 April 2014, pp.327-332

Dubleks Paslanmaz Çeliklerde İkincil Faz Oluşumuna Sıcaklığın ve Sürenin Etkisi

4. Isıl İşlem Sempozyumu, İstanbul, Turkey, 24 October 2013, pp.22-28

Production of Al2O3-Al Composites Using Vacuum Assted Block Mold Investment Casting

8th International PhD foundry Conference, Czech Republic, Brno, Czech Republic, 07 June 2011, pp.18-20

Lost foam casting technique applications for Al/SiC composite production

KISASÖZ A. , YEŞİLDAL C., KARAASLAN A.

69th World Foundry Congress 2010, WFC 2010, Hangzhou, China, 16 - 20 October 2010, vol.2, pp.573-576

Metal Matrisli Kompozit Üretimi İçin SiC İçerikli Ön Şekil Üretimi

KISASÖZ A. , TANDOĞAN G., LUŞ H. M. , KARAASLAN A. , KUŞKONMAZ N.

3. Uluslararası Döküm ve Çevre Sempozyumu, İstanbul, Turkey, 28 January 2010, pp.162-166

Otomotiv Sektöründe Kullanılan Sacların TIG ve Direnç Nokta Kaynağı İle Birleştirilmesi. Bildiriler Kitabı

Kaynak Teknolojisi VII. Ulusal Kongre ve Sergisi, Ankara, Turkey, 13 November 2009, pp.183-192

Otomotiv Sektöründe Kullanılan Sacların TIG ve Direnç Nokta Kaynağı İle Birleştirilmesi

Kaynak Teknolojisi VII. Ulusal Kongre ve Sergisi, Ankara, 01 November 2009

Processing and Microstructural Characterisation of AA 1070 and AA 6063 Matrix B4Cp Reinforced Composites

Toptan F., KILIÇARSLAN A., KARAASLAN A. , ÇİĞDEM M. , KERTİ I.

International Conference on Materials for Advenced Technologies, 28 June - 03 July 2009, pp.15

The Influence of Carbide Distribution on The Properties of Hot Work Tool Steels

18th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Czech Republic, 19 May 2009, no.30

The Effects of Nitriding Time-Temperature and Composition of Gas Mixture on The Mechanical Properties of Indexable Inserts

18th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Czech Republic, 19 May 2009

Ti İlavesi ile Üretilen Al-B4C kompozitlerinde Matris/Takviye Arayüzeyinin Mikroyapısal Karakterizasyonu

TOPTAN F., KILIÇARSLAN A. , KARAASLAN A. , KERTİ I.

5th International Advanced Technologies Symposium (IATS’xx09), 13 - 15 May 2009, pp.1016-1020

Yüksek Basınçlı Kalıp Dökümde Kovan Ömrünü Sınırlandıran Faktörler ve Yeni Nesil Çözümler

4. Alüminyum Sempozyumu, İstanbul, 01 May 2009

Viraj Askı Rot Kollarının TIG Yöntemi İle Kaynaklanabilirliğinin İncelenmesi

5. Uluslararası İleri Teknolojiler Sempozyumu (IATS'09), 01 May 2009

Al-B4C Kompozitlerinin Döküm Yolu ile Üretiminde Takviye Partikül İlavrsi Koşullarının Optimizasyonu

TOPTAN F., KILIÇARSLAN A., KARAASLAN A., ÇİĞDEM M., KERTİ I.

14th International Metallurgy Materials Congress, Turkey, 16 - 18 November 2008, pp.1589-1595

Elektrik Direnç Kaynak Yöntemi İle Birleştirilen 21 NiCrMo 3 Zincir çeliğine Uygulanan Akım Miktarının ve Tespit Basıncının Mekanik Özellikler ve Mikroyapı Üzerine Etkisi

12th International Materials Syposium, Denizli, 01 October 2008

Laser Kaynağı İle Viraj Askı Rot Kollarının Birleştirilmesi

12th International Materials Syposium, Denizli, 01 October 2008

High Temperature Examination of Laser-Welded Titanium Alloy

V. Congress of Metallurgists of Macedonia with International Participation, Ohrid, Macedonia, 17 September 2008

The Effect of Normalizing Parameters on the Phase Morphology and the Mechanical Properties in Armor Steel

AKÇA C., KARAASLAN A.

17th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Czech Republic, 17 September 2008, no.224

The Effect of Amount of Magnesium on The Precipitation Hardening Mechanism of AA-7075 Alloy

AKÇA C., KARAASLAN A.

V. Congress of Metallurgists of Macedonia with International Participation, Ohrid, Macedonia, 17 September 2008

Influence of Austempering Time on the Morphology of Heat Affected Zone in Welding of Upper Bainitic Unalloyed Austempered Ductile Iron

AKÇA C., KARAASLAN A.

17th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Czech Republic, 13 May 2008, no.225

Experimentally investigation of polyurethane materials used as dust boot in tie rod ends

11th International Research/Expert Conference, Trends in the Development of Machinery and Associated Technology, TMT 2007, Hammamet, Tunisia, 01 September 2007

Investigation of the stiuation of tie rod ends failing prematurely due to dust boot failure with soft PVC and neoprene

11th International Research/Expert Conference, Trends in the Development of Machinery and Associated Technology, TMT 2007, Hammamet, Tunisia, 01 September 2007

Formability characteristics of industrial pure aluminum AA 1235 and aluminum alloy AA 3003 at casting and room temperatures