Prof. Dr. Ahmet KARAASLAN

Materials Chemistry and Physics , cilt.284, 2022 (SCI-Expanded)

3. Microstructure, mechanical and corrosion properties of nickel superalloy weld metal

Kisasoz A., TÜMER M., KARAASLAN A.

MATERIALS TESTING , cilt.63, sa.10, ss.895-900, 2021 (SCI-Expanded)

4. INVESTIGATION OF THE EFFECTS OF DIFFERENT RETROGRESSION AND RE-AGING PARAMETERS APPLIED TO THE 7075 ALLOY ON THE MICRO-ARC OXIDATION PROCESS

Yilmaz M. S., Ozer G., ŞAHİN O., KARAASLAN A.

SURFACE REVIEW AND LETTERS , cilt.28, sa.09, 2021 (SCI-Expanded)

5. Microstructure, wear and corrosion characteristics of multiple-reinforced (SiC-B4C-Al2O3) Al matrix composites produced by liquid metal infiltration

Öztürk K., Gecü R., Karaaslan A.

CERAMICS INTERNATIONAL , cilt.47, sa.13, ss.18274-18285, 2021 (SCI-Expanded)

6. A Study on the Effects of Different Heat Treatment Parameters on Microstructure-Mechanical Properties and Corrosion Behavior of Maraging Steel Produced by Direct Metal Laser Sintering (DMLS)

Özer G., Karaaslan A.

Steel Research International , cilt.91, sa.10, ss.1-8, 2020 (SCI-Expanded)

7. Casting temperature dependent wear and corrosion behavior of 304 stainless steel reinforced A356 aluminium matrix bimetal composites fabricated by vacuum-assisted melt infiltration casting

Gecü R., Karaaslan A.

WEAR , cilt.446, 2020 (SCI-Expanded)

8. Influence of the phase balance and cooling conditions on the microstructure and corrosion behavior of solution-treated 1.4462 duplex stainless steel

Yalçıner G., Özer G., Kısasöz A., Karaaslan A.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.12, 2019 (SCI-Expanded)

9. Cooling slope casting of AA7075 alloy combined with reheating and thixoforging

Güler K. A., Kısasöz A., Ozer G., Karaaslan A.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.29, ss.2237-2244, 2019 (SCI-Expanded)

10. Effect of RRA heat treatment on corrosion and mechanical properties of AA7075

Özer G., Karaaslan A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , cilt.70, sa.11, ss.2064-2072, 2019 (SCI-Expanded)

11. Effect of secondary phases on 475 °c embrittlement of 1.4462 and 1.4501 duplex stainless steels at short-term heat treatment conditions

KISASÖZ A., Ozer G., KARAASLAN A.

Materials Research Express , cilt.6, sa.11, 2019 (SCI-Expanded)

12. Effects of retrogression and reaging heat treatment on the microstructure, exfoliation corrosion, electrical conductivity, and mechanical properties of AA7050

Özer G., Kaya I., Karaaslan A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , cilt.70, sa.10, ss.1788-1797, 2019 (SCI-Expanded)

13. Investigation of the relationship between intergranular corrosion and retrogression and reaging in the AA6063

Ozer G., KISASÖZ A., KARAASLAN A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , cilt.70, sa.12, ss.2256-2265, 2019 (SCI-Expanded)

14. Sliding Wear of the Ti-Reinforced Al Matrix Bi-metal Composite: A Potential Replacement to Conventional SiC-Reinforced Composites for Automotive Application

INTERNATIONAL JOURNAL OF METALCASTING , cilt.13, sa.3, ss.641-652, 2019 (SCI-Expanded)

15. Improving wear resistance of 304 stainless steel reinforced AA7075 aluminum matrix composite by micro-arc oxidation

GECÜ R., Yurekturk Y., Tekoglu E., Muhaffel F., KARAASLAN A.

SURFACE & COATINGS TECHNOLOGY , cilt.368, ss.15-24, 2019 (SCI-Expanded)

16. The effect of retrogression and re-aging treatment on mechanical and tribological features of AA7075 aluminium alloyEinfluss der Retrogressions- und Reaging-Behandlung auf die mechanischen und tribologischen Eigenschaften der Aluminiumlegierung AA7075

Ozer G., GECÜ R., KARAASLAN A.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.50, sa.6, ss.761-768, 2019 (SCI-Expanded)

17. A Comparative Study on Titanium-Reinforced Aluminium Matrix Composites Produced by Melt Infiltration Casting and Squeeze Infiltration

INTERNATIONAL JOURNAL OF METALCASTING , cilt.13, sa.2, ss.311-319, 2019 (SCI-Expanded)

18. Microstructural and Tribological Characterization of Stainless Steel-Reinforced Aluminum Matrix Bimetal Composites Produced at Various Mold Burnout Temperatures

TRIBOLOGY TRANSACTIONS , cilt.62, sa.2, ss.249-261, 2019 (SCI-Expanded)

19. Effects of RRA heat treatment on the exfoliation corrosion (EXCO), intergranular corrosion (IGC), and electrical conductivity of AA7075 alloy

Ozer G., Karaaslan A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , cilt.70, sa.3, ss.549-557, 2019 (SCI-Expanded)

20. Volume Fraction Dependent Wear Behavior of Titanium-Reinforced Aluminum Matrix Composites Manufactured by Melt Infiltration Casting

Duygulu N., MUSTAFAOĞLU U., KODOLBAŞ A. O., KARAASLAN A.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME , cilt.141, sa.2, 2019 (SCI-Expanded)

21. Preform-Based Production of Al2O3-Reinforced Aluminium Matrix Composites by Using Various Modification Techniques

Öztürk K., Gecü R., Karaaslan A.

Metals and Materials International , 2019 (SCI-Expanded)

22. A Study on Al/Cu Bimetal Production by Lost Foam Casting

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.55, sa.11, ss.728-740, 2018 (SCI-Expanded)

23. Etching behavior of ZnO:Ga thin films

MATERIALS TESTING , cilt.60, sa.11, ss.1097-1103, 2018 (SCI-Expanded)

24. Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by thixoforging combined with low superheat casting

GECÜ R., ACAR S., KISASÖZ A., ALTUG GULER K. A., KARAASLAN A.

Transactions of Nonferrous Metals Society of China (English Edition) , cilt.28, sa.3, ss.385-392, 2018 (SCI-Expanded)

25. Relationship Between Nanoindentation and Wear Properties of Stainless Steel-Reinforced Aluminium Matrix Composite

GECÜ R., ATAPEK Ş. H., KARAASLAN A.

TRIBOLOGY LETTERS , cilt.65, sa.4, 2017 (SCI-Expanded)

26. Influence of preform preheating on dry sliding wear behavior of 304 stainless steel reinforced A356 aluminum matrix composite produced by melt infiltration casting

TRIBOLOGY INTERNATIONAL , cilt.115, ss.608-618, 2017 (SCI-Expanded)

27. Properties of AA7075 aluminum alloy in aging and retrogression and reaging process

ÖZER G., KARAASLAN A.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.27, sa.11, ss.2357-2362, 2017 (SCI-Expanded)

28. Relationship of RRA heat treatment with exfoliation corrosion, electrical conductivity and microstructure of AA7075 alloy

Özer G., KARAASLAN A.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , cilt.68, sa.11, ss.1260-1267, 2017 (SCI-Expanded)

29. Investigation of spherisation in microstructures of aluminium casting alloys for thixoforging process

GÜLER K. A., GECÜ R., KISASÖZ A., KARAASLAN A.

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.58, sa.5, ss.489-494, 2017 (SCI-Expanded)

30. Effect of Water Storage on The Mechanical Properties of Zinc Polycarboxylate Cements

HAZAR A. B., KARAASLAN A.

Digest Journal Of Nanomaterials And Biostructures , cilt.2, sa.2, ss.243-252, 2017 (SCI-Expanded)

31. DOUBLE FILLET WELDING OF CARBON STEEL T-JOINT BY DOUBLE CHANNEL SHIELDING GAS METAL ARC WELDING METHOD USING METAL CORED WIRE

MERT T., GÜLTEKİN N., KARAASLAN A.

ARCHIVES OF METALLURGY AND MATERIALS , cilt.62, sa.2, ss.947-954, 2017 (SCI-Expanded)

32. Influence of Orbital Shaking on Microstructure and Mechanical Properties of A380 Aluminium Alloy Produced by Lost Foam Casting

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.58, sa.3, ss.238-243, 2017 (SCI-Expanded)

33. The Effect of RRA Heat Treatment on the Intergranular Corrosion (IGC) of the AA7075 Alloy

Özer G., KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.54, sa.4, ss.256-266, 2017 (SCI-Expanded)

34. A Comparative Study on the Microstructure Evaluation of Thixoforged A356 and A380 Aluminium Alloys

GÜLER K. A., GECÜ R., KISASÖZ A., KARAASLAN A.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.54, sa.3, ss.163-177, 2017 (SCI-Expanded)

35. EFFECT OF ETCHING METHODS IN METALLOGRAPHIC STUDIES OF DUPLEX STAINLESS STEEL 2205

KISASÖZ A., KARAASLAN A., BAYRAK Y.

METAL SCIENCE AND HEAT TREATMENT , cilt.58, ss.704-706, 2017 (SCI-Expanded)

36. Characteristics of austenitic stainless steel T-joints welded using the DMAG process with solid wire

MERT T., Gültekin N., KARAASLAN A.

MATERIALS TESTING , cilt.58, sa.9, ss.778-781, 2016 (SCI-Expanded)

37. Dry Sliding Wear Behavior of Cast A7075 and A7075/SAF 2205 Composite Material

KARAASLAN A., KISASÖZ A., ATAPEK Ş. H., GÜLER K. A.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.35, sa.5, ss.487-492, 2016 (SCI-Expanded)

38. Effect of Annealing Time and Cooling Rate on Precipitation Processes in a Duplex Corrosion-Resistant Steel

KISASÖZ A., Gurel S., KARAASLAN A.

METAL SCIENCE AND HEAT TREATMENT , cilt.57, ss.544-547, 2016 (SCI-Expanded)

39. Evaluation of double channel GMAW fillet welds of low carbon steel using solid wire

MERT T., Gultekin N., KARAASLAN A.

MATERIALS TESTING , cilt.57, ss.680-684, 2015 (SCI-Expanded)

40. A study of expanded polyethylene (EPE) pattern application in aluminium lost foam casting

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.56, sa.2, ss.171-176, 2015 (SCI-Expanded)

41. Fillet welding of austenitic stainless steel using the double channel shielding gas method with cored wire

MERT T., Gultekin N., KARAASLAN A.

MATERIALS TESTING , cilt.57, sa.1, ss.91-94, 2015 (SCI-Expanded)

42. Mechanical and Microstructural Evaluation of DMAG Welding of Structural Steel

MERT T., Gultekin N., KARAASLAN A.

ADVANCES IN MECHANICAL ENGINEERING , cilt.7, sa.1, 2015 (SCI-Expanded)

43. Investigation of Al/Steel Bimetal Composite Fabrication by Vacuum Assisted Solid Mould Investment Casting

ACTA PHYSICA POLONICA A , cilt.126, sa.6, ss.1327-1330, 2014 (SCI-Expanded)

44. Investigation of lost foam casted aluminum bimetal microstructures

Materialpruefung/Materials Testing , cilt.56, sa.9, ss.737-740, 2014 (SCI-Expanded)

45. Finite Element Analysis of 2205 Duplex Stainless Steel Welds

MATERIALS TESTING , cilt.56, sa.10, ss.795-799, 2014 (SCI-Expanded)

46. Fabrication of Al/Mg bimetal compound casting by lost foam technique and liquid-solid process

Materialpruefung/Materials Testing , cilt.56, sa.9, ss.700-702, 2014 (SCI-Expanded)

47. Effects of pattern coating and vacuum assistance on porosity of aluminium lost foam castings

Guler K. A., KISASÖZ A., KARAASLAN A.

Russian Journal of Non-Ferrous Metals , cilt.55, sa.5, ss.424-428, 2014 (SCI-Expanded)

48. Effects of alloying elements with various heat treatment processes on the properties of high speed steels

KISASÖZ A., TOPTOP G., KARAASLAN A.

Kovove Materialy , cilt.51, sa.3, ss.205-209, 2013 (SCI-Expanded)

49. The fabrication and characterization of Al/SiC-MMC castings produced by vacuum assisted solidmould investment casting process

RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.54, sa.4, ss.320-324, 2013 (SCI-Expanded)

50. Effect of Alloying Elements on the Tooling Capabilities of High Speed Steels Fabricated by Powder Metallurgy

Toptop G. O., KISASÖZ A., KARAASLAN A.

MATERIALS TESTING , cilt.55, sa.1, ss.43-46, 2013 (SCI-Expanded)

51. Infiltration of A6063 aluminium alloy into SiC-B4C hybrid preforms using vacuum assisted block mould investment casting technique

TOPTOP G. O., KISASÖZ A., KARAASLAN A.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.22, sa.7, ss.1563-1567, 2012 (SCI-Expanded)

52. Effects of Co as an alloying element and heat treatment processes on the properties of high speed steels

Materialpruefung/Materials Testing , cilt.54, sa.6, ss.427-430, 2012 (SCI-Expanded)

53. Mechanical properties of A6063/ SiC composites produced using the lost foam casting process

Güler K. A., Kisasoz A., Yuksel C., Karaaslan A.

Materialpruefung/Materials Testing , cilt.54, sa.3, ss.189-192, 2012 (SCI-Expanded)

54. Influence of heat treatment and thermochemical processes on the properties of the steel X 38 CrMoV 5 3

Kisasoz A., Karaaslan A.

Materialpruefung/Materials Testing , cilt.54, sa.2, ss.103-107, 2012 (SCI-Expanded)

55. A novel method for Al/SiC composite fabrication: Lost foam casting

Kisasoz A., Güler K. A., Karaaslan A.

International Journal of Materials Research , cilt.102, sa.3, ss.304-308, 2011 (SCI-Expanded)

56. Fabrication and characterization of SiC preforms for metal matrix composites

Materialpruefung/Materials Testing , cilt.53, ss.54-57, 2011 (SCI-Expanded)

57. Processing and microstructural characterisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites

Toptan F., Kilicarslan A., Karaaslan A., Çiğdem M., Kerti I.

MATERIALS & DESIGN , cilt.31, 2010 (SCI-Expanded)

58. Formation of the Stress-Relieved Structure in the Welded Region of Gas Tungsten Arc Welded Armor Steel with the Help of Heat Distrubution

KARAASLAN A., Akça C.

METAL SCIENCE AND HEAT TREATMENT , cilt.51, sa.11, ss.585-588, 2009 (SCI-Expanded)

59. Production of a Glass Fiber Reinforced Polymer Matrix Composite by Injection Moulding and its Characterization

KARAASLAN A., Sabancı S., Atapek H.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.51, sa.4, ss.215-218, 2009 (SCI-Expanded)

60. Formability Characteristics of Industrial Pure Aluminum at Casting and Room Temperature

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.51, sa.4, ss.234-237, 2009 (SCI-Expanded)

61. The Effect of Austempering Time on Heat Affected Zone in Gas Tungsten Arc Welding of Unalloyed Austempered Ductile Iron

KARAASLAN A., AKÇA C.

METALL , cilt.5, ss.295-297, 2008 (SCI-Expanded)

62. Einfluss von Zusatzwerkstoffe auf die Schweissbarkeit von der Aluminiumlegierung AlZnMg beim Wolfram-Inertgasschweissen

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.45, sa.2, ss.86-91, 2008 (SCI-Expanded)

63. Characterization of the Heat Affected Zone in Gas Tungsten Arc Welds of Unalloyed Austempered Ductile Iron

KARAASLAN A., Akca C.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.50, sa.5, ss.264-267, 2008 (SCI-Expanded)

64. Tensile Strength and Impact Toughness of an AA 7075-T6 Alloy Effects of Aging Temperature and Time During Retrogression Treatment

KARAASLAN A., Kaya I., Atapek H.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.50, sa.5, ss.256-258, 2008 (SCI-Expanded)

65. Crack Avoidance by Using Titanium as Filler Material for Laser Welding of a Chromium Steel with a Nickel Alloy

Karaaslan A.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.50, sa.5, ss.268-271, 2008 (SCI-Expanded)

66. Effect of aging temperature and of retrogression treatment time on the microstructure and mechanical properties of alloy AA 7075

KARAASLAN A., Kaya I., Atapek H.

METAL SCIENCE AND HEAT TREATMENT , cilt.49, ss.443-447, 2007 (SCI-Expanded)

67. Einfluss des Laserverfahrens auf Geometrie der Spuren beim Laserschweissen von Ni-Resist-Sphaeroguss mit hitzebestaendigem Stahl

METALS , cilt.7, ss.477-478, 2007 (SCI-Expanded)

68. Crack avoidance during powder metallurgy of a SiC particel reinforced aluminium alloy A 6063

KARAASLAN A., Lus M.

MATERIALPRUFUNG , cilt.49, ss.603-605, 2007 (SCI-Expanded)

69. Modellierung der mikrostrukturellen Aenderungen in heterogenen Verbindungen

MATERIALPRUFUNG , cilt.48, sa.11, ss.553-555, 2006 (SCI-Expanded)

70. Wolfram-Inertgasschweißen der Aluminiumlegierung AlMgSi1 mit und ohne Zusatzwerkstoff

MATERIALPRUFUNG , cilt.48, sa.5, ss.207-210, 2006 (SCI-Expanded)

71. Influence of cold work and plate thickness on the gas-tungsten arc weldability of commercially pure aluminium

MATERIALPRUFUNG , cilt.48, sa.4, ss.152-155, 2006 (SCI-Expanded)

72. Schweißen von Reintitanblechen: Laserstrahlschweissen und WIG-Schweissen von kommerziellen Reintitanblech

MATERIALPRUFUNG , cilt.46, sa.9, ss.452-454, 2004 (SCI-Expanded)

73. Schweißen von technisch reinem Titan: WIG-Schweissen mit der Titanlegierung TiAl6V4

MATERIALPRUFUNG , cilt.46, sa.9, ss.449-451, 2004 (SCI-Expanded)

74. Laserlegieren von Schnellarbeitstaehlen, Durch die Waermebehandlung bedingte Eigenschaftsaenderungen von laserlegierten Schnellarbeitstaehlen

MATERIALPRUFUNG , cilt.46, sa.3, ss.102-105, 2004 (SCI-Expanded)

75. Joinning of S 6-5-2 and 4140 steel with flash welding

Journal of Technical University of Gabrovo , cilt.27, ss.31-35, 2003 (SCI-Expanded)

76. Heißrissbildung beim Schweißen: Charakterisiseren heterogener Lichtbogenschweißverbindungen

MATERIALPRUFUNG , cilt.45, sa.10, ss.452-454, 2003 (SCI-Expanded)

77. Examining the changes of hardness of different materials joined by laser beam

Journal of Technical University of Gabrovo , cilt.27, ss.40-44, 2003 (SCI-Expanded)

78. Auswahl geeigneter Stabelektroden für Lichtbogenschweißen heterogener Verbindungen

Kısasöz A., Guler K. A., Karaaslan A.

STAHL UND EISEN , cilt.123, sa.9, ss.73-75, 2003 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 15

1. Determination of Temperature Gradient in TIG Welding of Duplex Stainless Steel

KISASÖZ A., GECÜ R., KARAASLAN A.

El-Cezerî Journal of Science and Engineering , cilt.4, ss.593-597, 2017 (Scopus)

2. Aluminium Bimetal Structure Production by Lost Foam Casting with Liquid-Liquid Process

Machines, Technologies, Materials , cilt.8, sa.10, ss.43-46, 2014 (Hakemli Dergi)

3. Metal Matrisli Kompozitlerin Vakum İnfiltrasyonla Dereceli Hassas Döküm Kalıplarında Üretimi

Güler K. A., KARAASLAN A.

Metalurji , cilt.170, ss.34-38, 2014 (Hakemsiz Dergi)

4. Dubleks Paslanmaz Çeliklerde Oluşan Yüksek Sıcaklık Fazlarına Genel Bir Bakış

Metalurji , cilt.7, sa.162, ss.57-61, 2012 (Hakemsiz Dergi)

5. Uzaktan Laser Sistemi İle Galvanizli Sacların Birleştirilmesinde Aralık Unsuru

Gedik Holding , cilt.2, ss.50-53, 2009 (Hakemsiz Dergi)

6. Ergitme Kaynağında Katılaşma Mekanizmasının Kaynak Bölgesi Özelliklerine Etkisi

MetalMakina , cilt.4, 2008 (Hakemsiz Dergi)

7. Düşük Alaşımlı Yüksek Hız Çeliklerinde Isıl İşlemler İle Özelliklerin Arttırılması

MetalMakina , cilt.2, ss.68-72, 2007 (Hakemsiz Dergi)

8. Yarı-Katı Fazda Magnezyum Üretimi

Metalurji Malzeme Dergisi , sa.6, ss.58-61, 2006 (Hakemli Dergi)

9. Östemperlenmiş Küresel Grafitli Dökme Demirin TIG Kaynak Yöntemi İle Birleşme Karakterizasyonu

Metal Makina , cilt.7, ss.392-397, 2006 (Hakemsiz Dergi)

10. Kalıplarda Laser İle Yüzey Sertleştirme

Kalıp , cilt.2, 2006 (Hakemsiz Dergi)

11. Sementasyon Çeliği (16 MnCr 5) İle Yapı Çeliğinin(St 37) TIG ve Elektrik Ark Kaynak Yöntemleriyle Birleştirilmesi

Metal Dünyası , cilt.123, ss.72-75, 2003 (Hakemsiz Dergi)

12. TIG Kaynak Yöntemi İle St 37 / DDL 20 Malzeme Çiftinin Kaynak Kabiliyetinin Araştırılması

Metal Dünyası , cilt.122, ss.109-111, 2003 (Hakemsiz Dergi)

13. Paslanmaz Çeliklerin Kaynağında Isıl İşlemin Etkileri

Metal Dünyası , cilt.119, 2003 (Hakemsiz Dergi)

14. Laserschweisseignung des unlegierten Baustahls St 37

Schweiss- und Prüftechnik , cilt.3, 2002 (Hakemli Dergi)

15. Laseschweissen von Gusseisen mit hitzebestaendigem Stahl

Schweiss- und Prüftechnik , cilt.11, 2000 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 78

1. Influence of Heat Treatment of 1.4462 and 1.4501 Duplex Stainless Steels on Microstructure and Wear Resistance

YALÇINER G., GECÜ R., KISASÖZ A., KARAASLAN A.

20th International Metallurgy and Materials Congress, İstanbul, Türkiye, 10 - 12 Haziran 2021, ss.316, (Özet Bildiri)

2. Prevention of Hot Crack Formation in 304 Stainless Steel Reinforced AA7075 Aluminium Matrix Bimetal Composites

Gecü R., Karaaslan A.

9th International Aluminium Symposium, İstanbul, Türkiye, 10 - 11 Ekim 2019, ss.34-38, (Tam Metin Bildiri)

3. EFFECTS OF RETROGRESSION AND REAGING (RRA) ON THE MECHANICAL AND PHYSICAL PROPERTIES IN ALUMINIUM ALLOYS 7050 AND 7075

Özer G., Kaya I., Karaaslan A.

9th International Aluminium Symposium , İstanbul, Türkiye, 10 - 11 Ekim 2019, ss.115-118

4. Production of Hybrid Reinforced AA7075 Matrix Composite with Investment Casting

Öztürk K., Karaaslan A.

9th International Aluminium Symposium, İstanbul, Türkiye, 10 - 11 Ekim 2019, ss.170-173, (Tam Metin Bildiri)

5. Effect of Micro Arc Oxidation (MAO) Parameters on Coating/Interface Behaviour of 7075-T6 Aluminium Alloy

Yılmaz M. S., Özer G., Şahin O., Karaaslan A.

8th International Conference on Advanced Technologies (ICAT'19), Sarajevo, Bosna-Hersek, 26 - 30 Ağustos 2019, ss.96-99, (Tam Metin Bildiri)

6. Çelik ile Farklı Malzeme Çiftlerinin Laser Kaynağı

Karaaslan A.

4th International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019, ss.200, (Özet Bildiri)

7. Electrochemical Corrosion Behavior of Solution Treated UNS32205 Duplex Stainless Steel

ÖZTÜRK K., KISASÖZ A., KARAASLAN A.

4th International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019, ss.287-289, (Tam Metin Bildiri)

8. A Study on the Effects of Solution Heat Treatment Time on Eutectic Silicon Morphology for A380 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.304-306, (Tam Metin Bildiri)

9. Effect of Preheating Treatment on Corrosion Behavior of AA6063 Alloy

CANBAY G., KISASÖZ A., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.291-293, (Tam Metin Bildiri)

10. Sliding Wear Characteristics of AISI 2205 Duplex Stainless Steel Cooled in Various Environments after Solution Treatment

GECÜ R., KISASÖZ A., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.837-840, (Tam Metin Bildiri)

11. The impact of volume fraction of commercially pure titanium reinforcement on aluminium matrix bimetal composite properties

GENÇER K., GECÜ R., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.148-151, (Tam Metin Bildiri)

12. Influence of Cooling Conditions on the Microstructure of G-NiCr28W

SALDUZ Y., BAŞARAN C., KISASÖZ A., KARAASLAN A.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.294-296, (Tam Metin Bildiri)

13. Effect of Preform Binders on the Properties of AA7075 Matrix Composites

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.265-268, (Tam Metin Bildiri)

14. Investigation of Microstructure and Corrosion Properties of the Inconel 625 Weld

TÜMER M., KISASÖZ A., KARAASLAN A., KERİMAK M.

5th International Conference on Welding Technologies and Exhibition, Sarajevo, Bosna-Hersek, 26 Eylül 2018, ss.273-277, (Tam Metin Bildiri)

15. TRIBOLOGICAL CHARACTERIZATION OF 304 STAINLESS STEEL REINFORCED AA7075 ALUMINIUM MATRIX COMPOSITE PRODUCED BY MELT INFILTRATION CASTING

ÖZTÜRK K., KISASÖZ A., KARAASLAN A.

2nd International Conference on Tribology, İstanbul, Türkiye, 18 Nisan 2018, ss.36-41, (Tam Metin Bildiri)

16. Fabrication of AA7075-SiCp Composite

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 Mart 2018, ss.273, (Özet Bildiri)

17. Investigation of the Effects of Solution Heat Treatmeant Time on the Eutectic Silicon for A356 Alloy

ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.268-272, (Tam Metin Bildiri)

18. The Effect of Preform Preheating on Microstructural and Mechanical Features of 80% CP-Ti Reinforced A356 Matrix Composite

DUYGULU N., MUSTAFAOĞLU Ü., ERGÜNHAN B. H., KODOLBAŞ A. O., KARAASLAN A.

International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.163-169, (Tam Metin Bildiri)

19. Dry Sliding Wear Properties of AA7075 Aluminium Matrix Hybrid Composites

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.

2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.295-300, (Tam Metin Bildiri)

20. Influence of Doping Elements on Zinc Oxide Thin Films Deposited by Sputtering

DUYGULU N., MUSTAFAOĞLU Ü., ERGÜNHAN B. H., YILMAZ O., KODOLBAŞ A. O., KARAASLAN A.

2017 ICG ANNUAL MEETING 32nd ŞİŞECAM GLASS SYMPOSIUM, 22 - 25 Ekim 2017

21. Investigation the Influence of Doping Elements on Etched Zinc Oxide Thin Films Deposited By Sputtering Technique

KODOLBAŞ A. O., MUSTAFAOĞLU Ü., ERGÜNHAN B. H., DUYGULU N., YILMAZ O., TUNA Ö., et al.

2017 ICG ANNUAL MEETING 32nd ŞİŞECAM GLASS SYMPOSIUM, 22 - 25 Ekim 2017, (Özet Bildiri)

22. Etched Zinc Oxide Thin Films Deposited by Sputtering Technique

2017 ICG ANNUAL MEETING 32nd ŞİŞECAM GLASS SYMPOSIUM, 22 - 25 Ekim 2017

23. Effect of Multipass Welding on Microstructure and Mechanical Properties of AISI 2205 Duplex Stainless Steel

KISASÖZ A., TÜMER M., KARAASLAN A.

3rd International Iron & Steel Symposium, Karabük, Türkiye, 03 Nisan 2017, ss.66-68, (Tam Metin Bildiri)

24. Aging of A356 Aluminum Billets Produced by Semi-Solid Metal Processing

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.

3rd International Iron & Steel Symposium, Karabük, Türkiye, 03 Nisan 2017, ss.267-270, (Tam Metin Bildiri)

25. Determining the Corrosion Behaviour of EN 1.4462 Duplex Stainless Steel in FeCl3 Media for Various Solution Treatment Conditions

KISASÖZ A., TÜFENK E., KARAASLAN A.

3rd International Iron & Steel Symposium, Karabük, Türkiye, 03 Nisan 2017, ss.201-203, (Tam Metin Bildiri)

26. Influence of Solution Heat Treatment at 1180°C on the Properties of 2.4879 Alloy

International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.166-169, (Tam Metin Bildiri)

27. Microstructural Evaluation of T6-Treated A380 Alloy Manufactured by Semi-Solid Metal Casting

GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A., KARAASLAN A.

International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.284-288, (Tam Metin Bildiri)

28. Production of CP-Ti Reinforced A356 Aluminum Composite by Vacuum-Assisted Investment Casting

International Conference on Engineering Technology and Innovation, Saraybosna, Bosna-Hersek, 22 Mart 2017, ss.210-214, (Tam Metin Bildiri)

29. Variation of Microstructure and Mechanical Properties of 2205 Duplex Stainless Steel for Solution Treatment at 1150 °C

KOCATURK B., AKDOĞAN EKER A., MERT T., KÜÇÜKYILDIRIM B. O., KARAASLAN A.

International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.170-174, (Tam Metin Bildiri)

30. EFFECTS OF LASER POWER AND WELDING SPEED ON THE REMOTE FIBER LASER WELDING OF THIN STEEL SHEETS USED IN THE AUTOMOTIVE INDUSTRY

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1239-1246, (Tam Metin Bildiri)

31. Otomotiv Sektöründe Kullanılan Sacların Uzaktan Fiber Lazer Kaynağı İle Birleştirilmesinde Kaynak Gücü ve Hızının Nüfuziyete Etkisi

Kocatürk B., Akdoğan Eker A., Mert T., Küçükyıldırım B. O., Karaaslan A.

16. Uluslararası Malzeme Sempozyumu (IMSP 2016), Denizli, Türkiye, 12 Ekim 2016, ss.1239-1246, (Tam Metin Bildiri)

32. Microstructural Evaluation of Thixoforged A380 Alloy Billets Produced by Low Superheat Casting Process

GÜLER K. A., KISASÖZ A., KARAASLAN A., ÖZER G.

18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.659-662, (Tam Metin Bildiri)

33. An Investigation of the Effect of Solution Heat Treatment on 475 °C Embrittlement in 1.4462 Duplex Stainless Steels

GECÜ R., KISASÖZ A., KARAASLAN A.

18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.501-503, (Tam Metin Bildiri)

34. The Effect of Intermetallic Phases on Corrosion Behaviour of Duplex Stainless Steels

ZORBA A. P., ÖZYILMAZ A. Ö., GECÜ R., KISASÖZ A., KARAASLAN A.

18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.836-839, (Tam Metin Bildiri)

35. Manufacturing and Aging of 7075 Based Metal-Metal Composites by Using Sawdusts as Reinforcements

GECÜ R., KISASÖZ A., GÜLER K. A., KARAASLAN A.

18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.114-117, (Tam Metin Bildiri)

36. Soğuk İş Takım Çeliklerinde Cr ve V İçeriğinin Malzeme Özellikleri Üzerindeki Etkisinin İncelenmesi

Kısasöz A., KARAASLAN A.

5. Isıl İşlem Sempozyumu, 01 Haziran 2016, ss.240-247, (Tam Metin Bildiri)

37. İnce Film Fotovoltaik Uygulamalar için Kimyasal Olarak Pürüzlendirilmiş Al Katkılı ZnO Filmlerin Özellikleri

Mustafaoğlu Ü., Evcimen Duygulu N., Kodolbaş A. O., KARAASLAN A., Ekerim A.

01 Mart 2016, cilt.45, ss.101-104, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

38. Hedef Altlık Mesafesinin Alüminyum Katkılı Çinko Oksit Filmler (ZnO:Al) Üzerindeki Etkisi

Top S., Evcimen Duygulu N., Kodolbaş A. O., KARAASLAN A.

01 Mart 2016, cilt.45, ss.142-145, (Tam Metin Bildiri)

39. Alçı Kalıba Döküm Yöntemi İle Üretilen Aa7075-A413 Bimetal Parçanın Özellikleri

YÜKSEL Ç., Kocabaş M., Gecü R., Erzi E., Dışpınar D., Güler K. A., et al.

KompEGE, 01 Kasım 2015, cilt.1, (Tam Metin Bildiri)

40. Wear Behavior of Aged DIN 1.4462 Duplex Stainless Steels

Atapek H., KARAASLAN A.

International Conference of Engineering Against Failure, 01 Haziran 2015, ss.121-128, (Tam Metin Bildiri)

41. Al-Si Kaplamalı Otomotiv Çeliklerinde Lazer Kaynaklı Birleştirme Uygulamaları

Sığırtmaç T., KARAASLAN A., Kısasöz A.

01 Mayıs 2014, (Tam Metin Bildiri)

42. Ferritik-Östenitik Çeliklerde Sıcaklığın Mekanik Özellikler Üzerindeki Etkisinin Modellenmesi

10. Uluslararası Kırılma Konferansı, Kayseri, Türkiye, 24 Nisan 2014, ss.327-332, (Tam Metin Bildiri)

43. Dubleks Paslanmaz Çeliklerde İkincil Faz Oluşumuna Sıcaklığın ve Sürenin Etkisi

4. Isıl İşlem Sempozyumu, İstanbul, Türkiye, 24 Ekim 2013, ss.22-28, (Tam Metin Bildiri)

44. Production of Al2O3-Al Composites Using Vacuum Assted Block Mold Investment Casting

8th International PhD foundry Conference, Czech Republic, Brno, Çek Cumhuriyeti, 07 Haziran 2011, ss.18-20, (Tam Metin Bildiri)

45. Lost foam casting technique applications for Al/SiC composite production

KISASÖZ A., YEŞİLDAL C., KARAASLAN A.

69th World Foundry Congress 2010, WFC 2010, Hangzhou, Çin, 16 - 20 Ekim 2010, cilt.2, ss.573-576, (Tam Metin Bildiri)

46. Metal Matrisli Kompozit Üretimi İçin SiC İçerikli Ön Şekil Üretimi

KISASÖZ A., TANDOĞAN G., LUŞ H. M., KARAASLAN A., KUŞKONMAZ N.

3. Uluslararası Döküm ve Çevre Sempozyumu, İstanbul, Türkiye, 28 Ocak 2010, ss.162-166, (Tam Metin Bildiri)

47. Otomotiv Sektöründe Kullanılan Sacların TIG ve Direnç Nokta Kaynağı İle Birleştirilmesi. Bildiriler Kitabı

Kaynak Teknolojisi VII. Ulusal Kongre ve Sergisi, Ankara, Türkiye, 13 Kasım 2009, ss.183-192, (Tam Metin Bildiri)

48. Otomotiv Sektöründe Kullanılan Sacların TIG ve Direnç Nokta Kaynağı İle Birleştirilmesi

Kaynak Teknolojisi VII. Ulusal Kongre ve Sergisi, Ankara, 01 Kasım 2009

49. Processing and Microstructural Characterisation of AA 1070 and AA 6063 Matrix B4Cp Reinforced Composites

Toptan F., KILIÇARSLAN A., KARAASLAN A., ÇİĞDEM M., KERTİ I.

International Conference on Materials for Advenced Technologies, 28 Haziran - 03 Temmuz 2009, ss.15, (Özet Bildiri)

50. The Influence of Carbide Distribution on The Properties of Hot Work Tool Steels

18th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Çek Cumhuriyeti, 19 Mayıs 2009, sa.30, (Tam Metin Bildiri)

51. The Effects of Nitriding Time-Temperature and Composition of Gas Mixture on The Mechanical Properties of Indexable Inserts

18th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Çek Cumhuriyeti, 19 Mayıs 2009, (Tam Metin Bildiri)

52. Ti İlavesi ile Üretilen Al-B4C kompozitlerinde Matris/Takviye Arayüzeyinin Mikroyapısal Karakterizasyonu

TOPTAN F., KILIÇARSLAN A., KARAASLAN A., KERTİ I.

5th International Advanced Technologies Symposium (IATS’xx09), 13 - 15 Mayıs 2009, ss.1016-1020, (Tam Metin Bildiri)

53. Yüksek Basınçlı Kalıp Dökümde Kovan Ömrünü Sınırlandıran Faktörler ve Yeni Nesil Çözümler

4. Alüminyum Sempozyumu, İstanbul, 01 Mayıs 2009

54. Viraj Askı Rot Kollarının TIG Yöntemi İle Kaynaklanabilirliğinin İncelenmesi

5. Uluslararası İleri Teknolojiler Sempozyumu (IATS'09), 01 Mayıs 2009

55. Al-B4C Kompozitlerinin Döküm Yolu ile Üretiminde Takviye Partikül İlavrsi Koşullarının Optimizasyonu

TOPTAN F., KILIÇARSLAN A., KARAASLAN A., ÇİĞDEM M., KERTİ I.

14th International Metallurgy Materials Congress, Türkiye, 16 - 18 Kasım 2008, ss.1589-1595, (Tam Metin Bildiri)

56. Elektrik Direnç Kaynak Yöntemi İle Birleştirilen 21 NiCrMo 3 Zincir çeliğine Uygulanan Akım Miktarının ve Tespit Basıncının Mekanik Özellikler ve Mikroyapı Üzerine Etkisi

12th International Materials Syposium, Denizli, 01 Ekim 2008

57. Laser Kaynağı İle Viraj Askı Rot Kollarının Birleştirilmesi

12th International Materials Syposium, Denizli, 01 Ekim 2008

58. High Temperature Examination of Laser-Welded Titanium Alloy

V. Congress of Metallurgists of Macedonia with International Participation, Ohrid, Makedonya, 17 Eylül 2008, (Tam Metin Bildiri)

59. The Effect of Normalizing Parameters on the Phase Morphology and the Mechanical Properties in Armor Steel

17th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Çek Cumhuriyeti, 17 Eylül 2008, sa.224, (Tam Metin Bildiri)

60. The Effect of Amount of Magnesium on The Precipitation Hardening Mechanism of AA-7075 Alloy

V. Congress of Metallurgists of Macedonia with International Participation, Ohrid, Makedonya, 17 Eylül 2008, (Tam Metin Bildiri)

61. Influence of Austempering Time on the Morphology of Heat Affected Zone in Welding of Upper Bainitic Unalloyed Austempered Ductile Iron

17th International Conference Metallurgy and Materials, Hradec Nad Moravicí, Çek Cumhuriyeti, 13 Mayıs 2008, sa.225, (Tam Metin Bildiri)

62. Experimentally investigation of polyurethane materials used as dust boot in tie rod ends

11th International Research/Expert Conference, Trends in the Development of Machinery and Associated Technology, TMT 2007, Hammamet, Tunisia, 01 Eylül 2007

63. Investigation of the stiuation of tie rod ends failing prematurely due to dust boot failure with soft PVC and neoprene

11th International Research/Expert Conference, Trends in the Development of Machinery and Associated Technology, TMT 2007, Hammamet, Tunisia, 01 Eylül 2007

64. Formability characteristics of industrial pure aluminum AA 1235 and aluminum alloy AA 3003 at casting and room temperatures