Arş. Gör. Meltem ERYILDIZ

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 7

1. Development and Characterization of PLA/PCL Blend Filaments and 3D Printed Scaffolds

Eryildiz M., Karakus A., Altan Eksi M.

Journal of Materials Engineering and Performance , cilt.34, sa.14, ss.14043-14054, 2025 (SCI-Expanded)

2. Design, FEA and experimental validation of 3D-printed PLA/PCL intervertebral cages for lumbar spinal fusion

Eryildiz M., Kadirhan O. A., Demirci M., Karakus A., Altan M.

Materialpruefung/Materials Testing , cilt.67, sa.6, ss.1014-1028, 2025 (SCI-Expanded)

3. Fabrication of polylactic acid/halloysite nanotube scaffolds by foam injection molding for tissue engineering

Eryıldız M., Altan M.

POLYMER COMPOSITES , cilt.41, sa.2, ss.757-767, 2020 (SCI-Expanded)

4. Polylactide/Halloysite Nanocomposite Foams: Particle Dispersion and Mechanical Strength

Eryıldız M., Altan M.

ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.619-621, 2019 (SCI-Expanded)

5. Comparison Foaming Behaviour of Polylactic Acid and Polypropylene

Eryıldız M., Altan M., Osswald T.

ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.756-758, 2019 (SCI-Expanded)

6. Effect of Process Parameters on Shear Layer Thickness in Injection Molded Short-Glass Fiber Reinforced Polypropylene

ALTAN M., Demirci M.

INTERNATIONAL POLYMER PROCESSING , cilt.33, sa.5, ss.714-720, 2018 (SCI-Expanded)

7. Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength

Altan M., Eryıldız M., Gumus B., Kahraman Y.

MATERIALS TESTING , cilt.60, ss.471-477, 2018 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 6

1. Investigation of protective surface film behavior of fluorine containingcover gas parameters on molten magnesium alloy

Vanlı A. S., Akdoğan A., Eryıldız M.

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.26, sa.1, ss.51-53, 2020 (ESCI)

2. Effect of Chemical Foaming Agent in Enhancing Dispersion of Montmorillonite in Polypropylene Nanocomposite

Azguler O., ERYILDIZ M., ALTAN M.

Journal of Research Updates in Polymer Science , cilt.8, ss.1-6, 2019 (Hakemli Dergi)

3. Cam Fiber Takviyeli Polimerlerin Plastik Enjeksiyonunda Fiber Yönlenmesinin İncelenmesi

Altan M., Eryıldız M.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , sa.18, ss.692-700, 2018 (Hakemli Dergi)

4. Properties of Nitinol Materials and Comparing Them With Other Materials For Stent Applications

ERYILDIZ E., DEMİRCİ M.

Academic Journal of Science , sa.5, ss.141-146, 2016 (Hakemli Dergi)

5. Savunma Sanayinde Kullanılan Magnezyum Alaşımları ve Uygulama Alanları

Demirci M., Vanlı A. S., Akdoğan A.

International Journal of Engineering Research and Development , cilt.7, sa.4, ss.13-20, 2015 (Hakemli Dergi)

6. Magnezyum Alaşımlarının Ergitme Prosesinde Koruyucu Gaz Atmosferlerinin Kullanımı

Demirci M., Vanlı A. S., Akdoğan A., Sönmez H.

MakineTek , sa.6, ss.280-286, 2014 (Hakemsiz Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. A Case Study on The Generation of Tree-Like Supports For Fused Deposition Modelling

Eryıldız M., Dındogdu T., Altan M.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1501-1507, (Tam Metin Bildiri)

2. Effect of Halloysite Nanotube on Mechanical and Biological Properties of Polylactic Acid Scaffolds Fabricated by Foam Injection Molding

Eryıldız M., Altan M.

35th International Conference of the Polymer Processing Society, İzmir, Türkiye, 26 - 29 Mayıs 2019, ss.255, (Özet Bildiri)

3. Improvement in Adhesion of Sandwich Structures With Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method

Sönmez M. E., Eker Gümüş B., Eryıldız M., Altan M.

4th International Conference on Advances In Mechanical Engineering, ICAME 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1038-1045, (Tam Metin Bildiri)

Metrikler

Arş. Gör. Meltem ERYILDIZ

Yayınlar & Eserler

1. Development and Characterization of PLA/PCL Blend Filaments and 3D Printed Scaffolds

2. Design, FEA and experimental validation of 3D-printed PLA/PCL intervertebral cages for lumbar spinal fusion

3. Fabrication of polylactic acid/halloysite nanotube scaffolds by foam injection molding for tissue engineering

4. Polylactide/Halloysite Nanocomposite Foams: Particle Dispersion and Mechanical Strength

5. Comparison Foaming Behaviour of Polylactic Acid and Polypropylene

6. Effect of Process Parameters on Shear Layer Thickness in Injection Molded Short-Glass Fiber Reinforced Polypropylene

7. Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength

1. Investigation of protective surface film behavior of fluorine containingcover gas parameters on molten magnesium alloy

2. Effect of Chemical Foaming Agent in Enhancing Dispersion of Montmorillonite in Polypropylene Nanocomposite

3. Cam Fiber Takviyeli Polimerlerin Plastik Enjeksiyonunda Fiber Yönlenmesinin İncelenmesi

4. Properties of Nitinol Materials and Comparing Them With Other Materials For Stent Applications

5. Savunma Sanayinde Kullanılan Magnezyum Alaşımları ve Uygulama Alanları

6. Magnezyum Alaşımlarının Ergitme Prosesinde Koruyucu Gaz Atmosferlerinin Kullanımı

1. A Case Study on The Generation of Tree-Like Supports For Fused Deposition Modelling

2. Effect of Halloysite Nanotube on Mechanical and Biological Properties of Polylactic Acid Scaffolds Fabricated by Foam Injection Molding

3. Improvement in Adhesion of Sandwich Structures With Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method

4. Effect of Scaffold Design on Mechanical and Biological Behavior of PLA Fabricated by Fused Deposition Modeling

5. Electroless Nickel Plating on Pretreated AZ91 Magnesium Alloy Die Casting Parts

6. Investigation The Effects of Process Parameters in Hot Chamber High Pressure Die Casting of Magnesium Alloys

7. Effects Of Heat Treatment On Mechanical And Corrosion Properties of Magnesium Alloys

8. INVESTIGATION OF THERMAL CONDITIONING OF HIGH PRESSURE DIE CASTING DIES

9. DESIGN PARAMETERS OF A STENT MANUFACTURING AND THEIR EFFECTS ON MECHANICAL BEHAVIOUR OF STENTS

10. PROTECTION BEHAVIOUR OF FLUORINE-CONTAINING COVER GASES ON MOLTEN AZ91 MAGNESIUM ALLOY

11. The Using of Sulphur Hexafluoride SF6 as a Cover Gas for Protection of Molten Magnesium Alloys

12. CHARACTERIZATION OF SURFACE FILMS FORMED ON MOLTEN MAGNESIUM IN ATMOSPHERES CONTAINING HYDRO FLUOROCARBON (HFC-134A)

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Diğer Toplam)

Proje

Açık Erişim