Yayınlar & Eserler

Yayın Ağı
Makaleler 19
Tümü (19)
SCI-E, SSCI, AHCI (17)
SCI-E, SSCI, AHCI, ESCI (18)
ESCI (1)
Scopus (18)
TRDizin (1)

1. Enhancing flexural performance of pultruded GFRP core sandwich beams using thin and thick CFRP/GFRP face sheets

Madenci E., Aksoylu C., MOLLAMAHMUTOĞLU Ç., Öztürk M., Özkılıç Y. O.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.48, sa.8, 2026 (SCI-Expanded, Scopus)

2. Experimental and numerical analysis of fatigue crack repair in Rib-to-Rib welded connections of orthotropic steel decks using CFRP and steel plates

Shakir S., MOLLAMAHMUTOĞLU Ç., ALEMDAR F.
Engineering Failure Analysis , cilt.190, 2026 (SCI-Expanded, Scopus)

3. Stress-Driven Nonlocal Modeling and Arc-Length Simulation of Post-Buckling Behavior of Functionally Graded Shallow Nano-Arches Under Partial Loading

TEKİN ATACAN A., MOLLAMAHMUTOĞLU Ç., YILMAZ M. O., ALTEKİN M.
International Journal of Structural Stability and Dynamics , 2026 (SCI-Expanded, Scopus)

4. Nonlinear finite element evaluation of the seismic performance of the historic ayvat masonry weir

MOLLAMAHMUTOĞLU Ç., Ozturk M., Aksoylu C., Madenci E., Ozkilic Y. O.
BULLETIN OF EARTHQUAKE ENGINEERING , 2025 (SCI-Expanded, Scopus)

5. Shear Capacity of Masonry Walls Externally Strengthened via Reinforced Khorasan Jacketing

MOLLAMAHMUTOĞLU Ç., Ozturk M., YILMAZ M. O.
Buildings , cilt.15, sa.13, 2025 (SCI-Expanded, Scopus)

6. Evaluation of the Buttress System of a Great Ottoman Mosque Against Gravity Loads and Horizontal Seismic Forces: The Case of the Istanbul Süleymaniye Mosque

İzol R., Gürel M. A., MOLLAMAHMUTOĞLU Ç., Avcil F.
Buildings , cilt.15, sa.8, 2025 (SCI-Expanded, Scopus)

7. Thermal Stress Analysis for Functionally Graded Plates with Modulus Gradation, Part II

Baytak T., Tosun M., İPEK C., MOLLAMAHMUTOĞLU Ç., Bulut O.
Experimental Mechanics , cilt.64, sa.8, ss.1229-1247, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

8. Effect of Buttress Form on Transverse Seismic Resistance of Masonry Buildings

Gürel M. A., İzol R., MOLLAMAHMUTOĞLU Ç., Pekgökgöz R. K., Yüksel F. Ş. K., Özeren M.
Iranian Journal of Science and Technology - Transactions of Civil Engineering , cilt.48, sa.1, ss.185-210, 2024 (SCI-Expanded, Scopus)

9. Efficiency of Buttress Form on the Out-of-plane Resistance of Masonry Walls Subjected to Vault Thrust

Avcil F., Izol R., Gürel M. A., Arkan E., MOLLAMAHMUTOĞLU Ç.
Tehnicki Vjesnik , cilt.30, sa.4, ss.1039-1046, 2023 (SCI-Expanded, Scopus) Creative Commons License

10. A comprehensive mechanical response and dynamic stability analysis of elastically restrained bi-directional functionally graded porous microbeams in the thermal environment via mixed finite elements

Mollamahmutoğlu Ç., Mercan A., Levent A.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.44, sa.8, ss.1-19, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

11. A novel functional and mixed finite element analysis of functionally graded micro-beams based on modified couple stress theory

MOLLAMAHMUTOĞLU Ç., MERCAN A.
Composite Structures , cilt.223, 2019 (SCI-Expanded, Scopus)

12. Buckling and free vibration analysis of functionally graded sandwich micro-beams resting on elastic foundation by using nonlocal strain gradient theory in conjunction with higher order shear theories under thermal effect

AL-SHUJAIRI M., MOLLAMAHMUTOĞLU Ç.
COMPOSITES PART B-ENGINEERING , cilt.154, ss.292-312, 2018 (SCI-Expanded, Scopus)

13. Dynamic stability of sandwich functionally graded micro-beam based on the nonlocal strain gradient theory with thermal effect

AL-SHUJAIRI M., MOLLAMAHMUTOĞLU Ç.
COMPOSITE STRUCTURES , cilt.201, ss.1018-1030, 2018 (SCI-Expanded, Scopus)

14. 15 Temmuz Şehitler Köprüsü yeni ve eski askı kablosu düzenlemelerinin karşılaştırmalı yapısal analizi

MOLLAMAHMUTOĞLU Ç.
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.9, ss.463-474, 2018 (TRDizin)

15. Residual winding stresses due to spatial web thickness variation

Good J., MOLLAMAHMUTOĞLU Ç., Markum R., Gale J.
Journal of Manufacturing Science and Engineering, Transactions of the ASME , cilt.139, sa.3, 2017 (SCI-Expanded, Scopus)

16. Modeling the influence of web thickness and length imperfections resulting from manufacturing processes on wound roll stresses

MOLLAMAHMUTOĞLU Ç., Good J.
CIRP Journal of Manufacturing Science and Technology , cilt.8, ss.22-33, 2015 (ESCI, Scopus)

17. Pressures on webs in wound rolls due to winding and contact

MOLLAMAHMUTOĞLU Ç., GANAPATHI S., GOOD J. K.
TAPPI JOURNAL , cilt.13, sa.2, ss.41-50, 2014 (SCI-Expanded, Scopus)

18. Analysis of Large Deformation Wound Roll Models

Mollamahmutoglu C., GOOD J. K.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME , cilt.80, sa.4, 2013 (SCI-Expanded, Scopus)

19. Nonlinearly Viscoelastic Nanoindentation of PMMA Under a Spherical Tip

Kucuk Y., Mollamahmutoglu C., Wang Y., Lu H.
EXPERIMENTAL MECHANICS , cilt.53, sa.5, ss.731-742, 2013 (SCI-Expanded, Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 24

1. NONLINEAR BENDING OF BIDIRECTIONAL FUNCTIONALLY GRADED SHALLOW ARCHES UNDER UNIFORMLY DISTRIBUTED LOADING

İzgi Y. G., Tekin Atacan A., Mollamahmutoğlu Ç.
25TH INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS ON LIFE, ENGINEERING, ARCHITECTURE AND MATHEMATICAL SCIENCES, İstanbul, Türkiye, 23 - 25 Mayıs 2026, ss.1352-1353, (Özet Bildiri) Creative Commons License

2. NONLINEAR BENDING OF AXIALLY FUNCTIONALLY GRADED SHALLOW ARCHES WITH PINNED ENDS

İzgi Y. G., Tekin Atacan A., Mollamahmutoğlu Ç.
MEETCON-WORLD, II. INTERNATIONAL MULTIDISCIPLINARY STUDIES CONGRESS, Adana, Türkiye, 15 - 18 Nisan 2026, cilt.1, ss.108, (Özet Bildiri) Creative Commons License

3. NONLINEAR SNAP-THROUGH BUCKLING OF HOMOGENEOUS SHALLOW ARCHES WITH PINNED–FIXED

Yalçınkaya K. A., Tekin Atacan A., Mollamahmutoğlu Ç.
16th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul, Türkiye, 20 - 22 Aralık 2025, cilt.1, ss.1525, (Özet Bildiri) Creative Commons License

4. Investigation and evaluation of seismic isolated hospital building complexes in the earthquake zone affected by Kahramanmaraş-Hatay earthquake sequence on February 6 and 20, 2023

Bekiroğlu S., Yılmaz M. O., Şahinkaya Y., Öztürk M., Mollamahmutoğlu Ç.
Proceedings of 3rd International Civil Engineering and Architecture Congress (ICEARC’23), Trabzon, Türkiye, 12 - 14 Ekim 2023, cilt.1, ss.864-878, (Tam Metin Bildiri) Creative Commons License

5. Web Length Creep in Wound Rolls

MOLLAMAHMUTOĞLU Ç., Gajalla A. R., markum r., Aurelie A., Good J. K.
15th International Conference on Web Handling, 10 - 13 Haziran 2019, (Tam Metin Bildiri)

6. Investigation of damage on derbendikhan dam during earthquake excitation

MOLLAMAHMUTOĞLU Ç., Bedirhanoglu I.
10th International Structural Engineering and Construction Conference, ISEC 2019, Illinois, Amerika Birleşik Devletleri, 20 - 25 Mayıs 2019, (Tam Metin Bildiri)

7. EVALUATION OF 12 NOVEMBER 2017 Mw 7.3 – 30 KM SOUTH OF HALABJA IRAQ-IRAN BORDER EARTHQUAKE AND ITS EFFECTS ON DARBANDIKHAN DAM FROM A GEOLOGICAL PERSPECTIVE

İMAMOĞLU M., BEDİRHANOĞLU İ., MOLLAMAHMUTOĞLU Ç.
5th INTERNATIONAL SYMPOSIUM on DAM SAFETY ANDEXHIBITION, 27 - 31 Ekim 2018, (Tam Metin Bildiri)

8. DAMAGE OF THE DERBENDIKHAN DAM DURING THE LAST Mw 7.3 HALABJA EARTHQUAKE

BEDİRHANOĞLU İ., MOLLAMAHMUTOĞLU Ç., İMAMOĞLU M.
5th INTERNATIONAL SYMPOSIUM on DAM SAFETY ANDEXHIBITION, 27 - 31 Ekim 2018, (Tam Metin Bildiri)

9. Tarihi Zerzevan Kalesi Güney Kulesinin Mevcut Durumunun Değerlendirilmesi

BEDİRHANOĞLU İ., MOLLAMAHMUTOĞLU Ç.
6th International GAP Engineering Conference – GAP2018, 8 - 10 Kasım 2018, (Tam Metin Bildiri)

10. Darbandikhan Barajında Oluşan Hasarın İki Boyutlu Sonlu Elemanlar Yöntemi ile Değerlendirilmesi

BEDİRHANOĞLU İ., MOLLAMAHMUTOĞLU Ç.
6th International GAP Engineering Conference – GAP2018, 8 - 10 Kasım 2018, (Tam Metin Bildiri)

11. Parametric Investigation of Moment Transferring Steel Connections

Taşpınar M. S., MOLLAMAHMUTOĞLU Ç.
THE 3rd INTERNATIONAL CONFERENCE ONCIVIL AND ENVIRONMENTAL ENGINEERING, 24 - 27 Nisan 2018, (Özet Bildiri)

12. TERMAL GERİLME PROBLEMİ İLE YÜZEY KUVVETLERİNİN OLUŞTURDUĞU ELASTİK PROBLEMİN ANALOJİSİNE AİT DENEYSEL ÇALIŞMA

BULUT O., BAYTAK T., Tosun M., İpek C., MOLLAMAHMUTOĞLU Ç., Abdulaliyev Z.
XX. Ulusal Mekanik Kongresi, Türkiye, 5 - 09 Eylül 2017, (Tam Metin Bildiri)

13. İNCE KOMPOZİT LEVHALARDA ANİZOTROP TERMAL GERİLMEANALİZİ

BAYTAK T., BULUT O., MOLLAMAHMUTOĞLU Ç., dönmez a., ATAOĞLU Ş.
XX. Ulusal Mekanik Kongresi, Türkiye, 5 - 09 Eylül 2017, (Tam Metin Bildiri)

14. NIP IMPINGED CENTER-WINDING INCLUDING A NONLINEAR BEAM MODEL

MOLLAMAHMUTOĞLU Ç., Good J. K., markum r., Gale J.
14th İnternational Conference on Web Handling, 5 - 07 Haziran 2017, (Tam Metin Bildiri)

15. INVESTIGATION of THERMAL EFFECTS ON RETROFITTED BOSPHORUS BRIDGE: COMPARISON BETWEEN DIAGONAL AND VERTICAL HANGER CONFIGURATIONS

MOLLAMAHMUTOĞLU Ç., eyüpgiller m. m.
Computational Civil Engineering 2017, 26 Mayıs 2017, (Tam Metin Bildiri)

16. INTRICATE FINITE ELEMENT MODELING of THE RETROFITTED 15th JULY MARTYRS BRIDGE

MOLLAMAHMUTOĞLU Ç., Eyüpgiller M. M.
ICOCEE 2017, 8 - 10 Mayıs 2017, (Özet Bildiri)

17. The Impact of Thickness Measurement on Residual Stresses Due to Winding

MOLLAMAHMUTOĞLU Ç.
Thirteenth International Conference on Web Handling, 8 - 10 Haziran 2015, (Tam Metin Bildiri)

18. AN AXISYMMETRIC NONLINEAR TRANSIENT THERMO-ELASTIC WINDINGMODEL

MOLLAMAHMUTOĞLU Ç.
Thirtheenth Internatıonal Conference on Web Handling, 8 - 10 Haziran 2015, (Tam Metin Bildiri)

19. The coupling of winding models and roll quality instruments

MOLLAMAHMUTOĞLU Ç., BULUT O.
The Thirteenth International Conference on Web Handling, 8 - 10 Haziran 2015, (Tam Metin Bildiri)

20. Surface Compression of Wound Rolls

MOLLAMAHMUTOĞLU Ç., ganapathi s., Good J. K.
12th International Conference on Web Handling, 9 - 12 Haziran 2013, (Tam Metin Bildiri)

21. Possible Implications of Grain Scale Material Heterogeneity on Radiation Hardening and Embrittlement

bardenhagen s., MOLLAMAHMUTOĞLU Ç., lu h.
Materials Modeling and Simulation for Nuclear Fuels, 26 - 28 Eylül 2011, (Tam Metin Bildiri)

22. EVALUATION OF HIGHER ORDER SHAPE FUNCTIONS IN 2D GIMP SIMULATIONS and STRUCTURED MESH REFINEMENT

MOLLAMAHMUTOĞLU Ç., LU H.
11th us national congress on computational mechanics, 25 - 28 Temmuz 2011, (Tam Metin Bildiri)

23. LARGE DEFORMATION WINDING MODELS

MOLLAMAHMUTOĞLU Ç., Good J. K.
10th International Conference on Web Handling, 8 - 10 Haziran 2009, (Tam Metin Bildiri)

24. AXISYMMETRIC WOUND ROLL MODELS

MOLLAMAHMUTOĞLU Ç., Good J. K.
10th International Conference on Web Hanling, 8 - 10 Haziran 2009, (Tam Metin Bildiri)
Kitaplar 1

1. Mukavemet

Arpacı A., ATAOĞLU Ş., YÜCEL A., BULUT O., MOLLAMAHMUTOĞLU Ç., Tosun M.
Palme Yayınevi, Ankara, 2019
Metrikler

Yayın

44

Yayın (WoS)

18

Yayın (Scopus)

19

Atıf (WoS)

239

H-İndeks (WoS)

6

Atıf (Scopus)

259

H-İndeks (Scopus)

6

Atıf (Scholar)

322

H-İndeks (Scholar)

8

Atıf (Diğer Toplam)

2

Toplam Atıf Sayısı

261

Proje

9

Tez Danışmanlığı

10

Açık Erişim

24
BM Sürdürülebilir Kalkınma Amaçları
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM
SDG 15: AMAÇ 15: KARASAL YAŞAM
SDG 17: AMAÇ 17: AMAÇLAR İÇİN ORTAKLIKLAR