Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Processing of Al-CuO Composite Powders by High-Pressure Torsion: the Effect of Rotation Number on their Mechanical and Corrosive Properties

Günay Bulutsuz A., Dikici B., Bruder E.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.12, sa.1, ss.1-12, 2025 (SCI-Expanded)

Development of Fe-10% (HA/β-Tricalcium Phosphate) Composite via Solid-State Manufacturing Route and Investigation of Material Properties for Biodegradable Implant Applications

GÜNAY BULUTSUZ A., Chrominski W., Bazarnik P., Bruder E.
Advanced Engineering Materials , cilt.26, sa.11, 2024 (SCI-Expanded) identifier

An investigation over microstructure and HIP processing effects on wear performance of pure chromium parts fabricated by laser powder bed fusion

GÜNAY BULUTSUZ A., Gulec B., Gokcekaya O., Gardstam J., Nakano T., YILMAZER H.
International Journal of Refractory Metals and Hard Materials , cilt.120, 2024 (SCI-Expanded) identifier

Investigation of corrosion and wear performance of TiNbTaZr/Cr-Mo PVD coatings on 316L SS in Hanks's solution for improved biomedical applications

Atmaca I., DİKİCİ B., EZİRMİK K. V., GÜNAY BULUTSUZ A., Niinomi M.
Surface and Coatings Technology , cilt.473, 2023 (SCI-Expanded) identifier

Systemic observation and measurement of microgap formation in dental implant–abutment connection interface under fatigue

Mercan C., Günay Bulutsuz A., Katiboglu A. B.
Materials Testing , cilt.65, sa.11, ss.1-15, 2023 (SCI-Expanded) identifier

Tribological behavior of high-pressure torsion processed biodegradable pure Zn under dry and wet conditions

GÜNAY BULUTSUZ A.
Industrial Lubrication and Tribology , cilt.74, sa.5, ss.542-549, 2022 (SCI-Expanded) identifier identifier

Ultrasonic Assisted Incremental Equal Angular Channel Pressing Process of AA 6063

Günay Bulutsuz A.
Advanced Engineering Materials , cilt.23, 2021 (SCI-Expanded) identifier identifier

Incremental Severe Plastic Deformation Effect on Mechanical and Microstructural Characteristics of AA6063

GÜNAY BULUTSUZ A., Chrominski W.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.74, sa.1, ss.69-77, 2021 (SCI-Expanded) identifier identifier

A Comparison of Warm and Combined Warm and Low-Temperature Processing Routes for the Equal-Channel Angular Pressing of Pure Titanium

Bulutsuz A., Chrominski W., Huang Y., Kral P., YURCİ M. E., Lewandowska M., et al.
ADVANCED ENGINEERING MATERIALS , cilt.22, sa.2, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Investigation UV-treatment and surface modifications effect on surface energy and aging behaviour of biomedical surfaces

Bulutsuz A.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING , cilt.14, sa.3, ss.223-237, 2020 (SCI-Expanded) identifier identifier

Tribological behavior of a hydrostatically extruded ultra-fine grained Ti-13Nb-13Zr alloy

Bulutsuz A., Yurci M. E., Ozaltin K., Chrominski W., Lewandowska M.
MATERIALS TESTING , cilt.61, sa.6, ss.543-548, 2019 (SCI-Expanded) identifier identifier

Biological responses of ultrafine grained pure titanium and their sand blasted surfaces

Günay Bulutsuz A., Berrak Ö., Yeprem H. A., Arısan E. D., Yurci M. E.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , cilt.91, ss.382-388, 2018 (SCI-Expanded) identifier identifier identifier

Optimization Process Parameters of Equal Angular Channel Pressing According to the Measurement Results of Microstructural Homogeneity

GÜNAY BULUTSUZ A., YURCİ M. E., Durakbaşa N.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS , cilt.21, sa.6, ss.1-9, 2018 (SCI-Expanded)

Microstructure and Texture Evolutions of Biomedical Ti-13Nb-13Zr Alloy Processed by Hydrostatic Extrusion

OZALTİN K., PANİGRAHİ A., CHROMİNSKİ W., Bulutsuz A., Kulczyk M., Zehetbauer M. J., et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.11, ss.5747-5755, 2017 (SCI-Expanded) identifier identifier

Influence of Surface Modification Methods on the Topography of Dental Implants by Using Metrological Observation Techniques

Bulutsuz A., MERCAN C. U., Karapinar G., Katiboglu A. B., LEWANDOWSKA M.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.625-627, 2016 (SCI-Expanded) Creative Commons License identifier identifier

Measurement of temperature change during the implant site preparation to determine influence of tool characteristics

Bulutsuz A., Tanyel R. C., Katiboglu A. B.
MEASUREMENT , cilt.79, ss.354-359, 2016 (SCI-Expanded) identifier identifier

Optimization of end milling parameters and determination of the effects of edge profile for high surface quality of AISI H13 steel by using precise and fast measurements

Durakbasa M. N., AKDOĞAN A., Vanli A. S., Bulutsuz A.
MEASUREMENT , cilt.68, ss.92-99, 2015 (SCI-Expanded) identifier identifier

Application of fuzzy logic methodology for predicting dynamic measurement errors related to process parameters of coordinate measuring machines

Bulutsuz A., Yetilmezsoy K., Durakbasa N.
JOURNAL OF INTELLIGENT & FUZZY SYSTEMS , cilt.29, ss.1619-1633, 2015 (SCI-Expanded) identifier identifier

Enhancement in mechanical properties of a beta-titanium alloy by high-pressure torsion

Sharman K., Bazarnik P., Brynk T., Bulutsuz A., Lewandowska M., Huang Y., et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.4, sa.1, ss.79-83, 2015 (SCI-Expanded) identifier identifier

Importance of Measurement Parameters for the Dental Implant Surface Characterization

GUNAY A., SAĞBAŞ B., DURAKBASA M. N.
ACTA PHYSICA POLONICA A , cilt.125, sa.2, ss.484-487, 2014 (SCI-Expanded) Creative Commons License identifier identifier

Development of Ann-Based Models to Predict Biogas and Methane Productions in Anaerobic Treatment of Molasses Wastewater

Yetilmezsoy K., Türkdoğan F. İ., Temizel I., Gunay A.
INTERNATIONAL JOURNAL OF GREEN ENERGY , cilt.10, ss.885-907, 2013 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

Effect of Nb0.5 and Mo0.75 addition on in-vitro corrosion and wear resistance of high-speed laser metal deposited Al0.3CrFeCoNi high-entropy alloy coatings

Dikici B., Lindner T., Lampke T., Grund T., Günay Bulutsuz A.
APPLIED SURFACE SCIENCE ADVANCES , cilt.26, sa.26, ss.1-12, 2025 (ESCI)

Biyoçözünür İmplant Uygulamaları İçin Saf Çinko Tozlarından İnce Taneli Yapıların İmalatı ve Çözünme Davranışının Karakterizasyonu

Günay Bulutsuz A.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.9, sa.1, ss.467-469, 2021 (Hakemli Dergi) Creative Commons License identifier

Ha/Β-TCP Kumlama ve Anodizasyon İşlemlerinin Yüzey Kontak Açısına ve Topografyasına Etkilerinin İncelenmesi

Günay Bulutsuz A.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.8, sa.1, ss.1072-1083, 2020 (Hakemli Dergi)

Calculation of measurement uncertainty for plastic (ABS) material in flexural testing

Gunay Bulutsuz A., Fank S., Gülmez T., Durakbasa N.
International Journal of Metrology and Quality Engineering , cilt.4, sa.1, ss.29-33, 2013 (Scopus) Creative Commons License identifier

Dental İmplantolojide Kullanılan G4 Saf Titanyum İmplantların Kumlama ve Asitleme Teknikleriyle Oluşturulan Yüzey Modifi kasyonlarının İmalat Aşamalarını Ele Alarak Değerlendirilmesi

GÜNAY BULUTSUZ A., KATİBOĞLU A. B., M NUMAN D.
MÜHENDİS VE MAKİNA , cilt.54, 2013 (Hakemli Dergi)

Determining the Measurement Uncertainties to Fulfill the Demands on Product Quality

Akdoğan A., Günay Bulutsuz A.
ACADEMIC SCIENCE OF JOURNAL , cilt.2, sa.1, ss.243-247, 2013 (Hakemli Dergi)

Assessment of machining with uncoated and coated end mills and determining surface topography using 2D fast Fourier transform

Durakbasa M., Demircioglu P., Bogrekci I., Bas G., Gunay A.
International Journal of Nanomanufacturing , cilt.8, ss.493-507, 2012 (Scopus) identifier

Surface Characterization by Accurate Measurementand Image Processing Systems on Machined Surfaces of Precision Cutting Tools

M NUMAN D., Ismail B., DEMİRCİOĞLU P., BAŞ G., GÜNAY BULUTSUZ A.
Journal of Automation, Mobile Robotics Intelligent Systems , cilt.3, ss.51-55, 2011 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Effect of Equal Channel Angular Pressing Parameters on Meta-Stable Beta Titanium Alloy with Changeable Young ’ s Modulus

Mahmutoğlu M. A., Günay Bulutsuz A., Nakai M., Yapıcı G. G., Yılmazer H.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, cilt.1, ss.1013-1015 Creative Commons License

Effect of Equal Channel Angular Pressing Parameters on Meta-Stable Beta Titanium Alloy with Changeable Young ’ s Modulus

Mahmutoğlu M. A., GÜNAY BULUTSUZ A., Nakai M., YAPICI G. G., Yilmazer H.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), 25 - 27 Nisan 2019

Continuous severe plastic deformation methods

GÜNAY BULUTSUZ A., Yurci M. E.
Materials Science and Technology 2018, MS and T 2018, 14 - 18 Ekim 2018 Creative Commons License identifier

Investigation of Different Severe Plastic Deformation Methods Effect on Ti13Nb13Zr

GÜNAY BULUTSUZ A., Kadir Ö., Witold C., Yurci M. E., Lewandowska M.
Materials Science and Technology 2018, MS and T 2018, 14 - 18 Ekim 2018 identifier

Ultrasonic Assistance for Severe Plastic Deformation Applications

GÜNAY BULUTSUZ A., Yilmazer H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Surface Modification of Ti6Al4V Type Dental Alloy in Acidic Medium

Gökçen E., Gürsoy Ö., GÜNAY BULUTSUZ A., Mercan Ç., Tan E., KATİBOĞLU A. B., et al.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

High performance copper and copper alloys fabricated by severe plastic deformation

GÖKDUMAN A., YILMAZER H., GÖDE C., DİKİCİ B., DVORAK J., SKLENICKA V., et al.
3rd International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.75-78

Geometrical Tolerances for Additive Manufacturing: An Overview

Sağbaş B., Günay Bulutsuz A.
2nd International Symposium on 3D Printing Technologies (3D-PTS2017), 3-4 April, 2017, Istanbul Turkey, İstanbul, Türkiye, 3 - 04 Nisan 2017, ss.1

Ultra Fine Grained Pure Titanium Grade 4 Surface Morphologies as Dental Implant Materials

Günay Bulutsuz A., Yeprem H. A., Yurci M. E.
Collaborative Conference on 3D & Materials Research, Seoul, Güney Kore, 20 - 24 Haziran 2016

INFLUENCE OF SEVERE PLASTIC DEFORMATION ON TI13NB13ZR SURFACE MORPHOLOGY

GÜNAY BULUTSUZ A., YURCİ M. E., LEWANDOESKA M.
XXI IMEKO World Congress “Measurement in Research and Industry”, 30 Ağustos - 04 Eylül 2015

INVESTIGATION CMM MEASUREMENT PARAMETERS EFFECT TO THE MEASUREMENT ERROR

GÜNAY BULUTSUZ A., YURCİ M. E., DURAKBAŞA M. N.
XXI IMEKO World Congress “Measurement in Research and Industry”, 30 Eylül - 02 Ekim 2015

Estimation of Surface Modification Methods Effect on Topography of DentalImplants by Using Metrological Observation Techniques

GÜNAY BULUTSUZ A., ÇİĞDEM ÜNLÜ M., KARAPINAR G., KATİBOĞLU A. B., LEWANDOWSKA M.
International Congress on Biomaterials & Biosensors, 16 - 19 Nisan 2015

Investigation of Dynamic Fatigue Effect on Marginal Fit and Microgaps ofDifferent Dental İmplant Abutment Interfaces

MERCAN Ç. Ü., GÜNAY BULUTSUZ A., KATİBOĞLU A. B.
5th International Advances in Applied Physics and Materials Science Congress & Exhibition, 16 - 19 Nisan 2015

Measurement and Image Processing Evaluation of Surface Modifications of Dental Implants G4 Pure Titanium Created by Different Techniques

Bulutsuz A., Demircioglu P., Bogrekci I., Durakbasa M. N., Katiboglu A. B.
4th International Congress in Advances in Applied Physics and Materials Science (APMAS), Fethiye, Türkiye, 24 - 27 Nisan 2014, cilt.1653 Creative Commons License identifier identifier

Surface Topographical Investigations of the Machining Effects on Turning with Coated Inserts for Different Materials

DEMİRCİOĞLU P., GÜNAY BULUTSUZ A., SAĞBAŞ B., BÖĞREKCİ İ., DURAKBAŞA N.
7 th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, 20 - 23 Haziran 2013

Determination of Cutting Tool Geometries with High Precise Measurement Techniques and Investigation of Their Effects on Workpiece Surface Properties

Durakbaşa N., Akdoğan A., Vanlı A. S., Günay Bulutsuz A.
12th IMEKO TC 10 Workshop on Technical Diagnostics, Florence, İtalya, 17 - 20 Haziran 2013, ss.106-111

Calculation of measurement uncertainty for plastic (ABS) material in flexural testing

GÜNAY BULUTSUZ A., FANK S., GÜLMEZ T., DURAKBAŞA N.
XX Imeko World Congress Metrology for Green Growth September, 9 - 14 Eylül 2012 identifier

THE OPTIMIZATION OF MEASUREMENT CALIBRATION PROCEDURE WITH HEURISTIC APPROACH

GÜNAY BULUTSUZ A., DEMİRCİOĞLU P., Cem Y., DURAKBAŞA N.
INTERNATIONAL DOKTORAL SEMINAR, 20 - 22 Mayıs 2012
Metrikler

Yayın

51

Atıf (WoS)

149

H-İndeks (WoS)

6

Atıf (Scopus)

238

H-İndeks (Scopus)

7

Atıf (Scholar)

194

H-İndeks (Scholar)

6

Atıf (Diğer Toplam)

1

Proje

17

Fikri Mülkiyet

1

Açık Erişim

7
BM Sürdürülebilir Kalkınma Amaçları