Doç. Dr. Aslı GÜNAY BULUTSUZ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 21

1. Processing of Al-CuO Composite Powders by High-Pressure Torsion: the Effect of Rotation Number on their Mechanical and Corrosive Properties

Günay Bulutsuz A., Dikici B., Bruder E.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.12, sa.1, ss.1-12, 2025 (SCI-Expanded)

2. Development of Fe-10% (HA/β-Tricalcium Phosphate) Composite via Solid-State Manufacturing Route and Investigation of Material Properties for Biodegradable Implant Applications

GÜNAY BULUTSUZ A., Chrominski W., Bazarnik P., Bruder E.

Advanced Engineering Materials , cilt.26, sa.11, 2024 (SCI-Expanded)

3. An investigation over microstructure and HIP processing effects on wear performance of pure chromium parts fabricated by laser powder bed fusion

GÜNAY BULUTSUZ A., Gulec B., Gokcekaya O., Gardstam J., Nakano T., YILMAZER H.

International Journal of Refractory Metals and Hard Materials , cilt.120, 2024 (SCI-Expanded)

4. Investigation of corrosion and wear performance of TiNbTaZr/Cr-Mo PVD coatings on 316L SS in Hanks's solution for improved biomedical applications

Atmaca I., DİKİCİ B., EZİRMİK K. V., GÜNAY BULUTSUZ A., Niinomi M.

Surface and Coatings Technology , cilt.473, 2023 (SCI-Expanded)

5. Systemic observation and measurement of microgap formation in dental implant–abutment connection interface under fatigue

Mercan C., Günay Bulutsuz A., Katiboglu A. B.

Materials Testing , cilt.65, sa.11, ss.1-15, 2023 (SCI-Expanded)

6. Tribological behavior of high-pressure torsion processed biodegradable pure Zn under dry and wet conditions

GÜNAY BULUTSUZ A.

Industrial Lubrication and Tribology , cilt.74, sa.5, ss.542-549, 2022 (SCI-Expanded)

7. Ultrasonic Assisted Incremental Equal Angular Channel Pressing Process of AA 6063

Günay Bulutsuz A.

Advanced Engineering Materials , cilt.23, 2021 (SCI-Expanded)

8. Incremental Severe Plastic Deformation Effect on Mechanical and Microstructural Characteristics of AA6063

GÜNAY BULUTSUZ A., Chrominski W.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.74, sa.1, ss.69-77, 2021 (SCI-Expanded)

9. A Comparison of Warm and Combined Warm and Low-Temperature Processing Routes for the Equal-Channel Angular Pressing of Pure Titanium

Bulutsuz A., Chrominski W., Huang Y., Kral P., YURCİ M. E., Lewandowska M., et al.

ADVANCED ENGINEERING MATERIALS , cilt.22, sa.2, 2020 (SCI-Expanded)

10. Investigation UV-treatment and surface modifications effect on surface energy and aging behaviour of biomedical surfaces

Bulutsuz A.

INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING , cilt.14, sa.3, ss.223-237, 2020 (SCI-Expanded)

11. Tribological behavior of a hydrostatically extruded ultra-fine grained Ti-13Nb-13Zr alloy

Bulutsuz A., Yurci M. E., Ozaltin K., Chrominski W., Lewandowska M.

MATERIALS TESTING , cilt.61, sa.6, ss.543-548, 2019 (SCI-Expanded)

12. Biological responses of ultrafine grained pure titanium and their sand blasted surfaces

Günay Bulutsuz A., Berrak Ö., Yeprem H. A., Arısan E. D., Yurci M. E.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , cilt.91, ss.382-388, 2018 (SCI-Expanded)

13. Optimization Process Parameters of Equal Angular Channel Pressing According to the Measurement Results of Microstructural Homogeneity

GÜNAY BULUTSUZ A., YURCİ M. E., Durakbaşa N.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS , cilt.21, sa.6, ss.1-9, 2018 (SCI-Expanded)

14. Microstructure and Texture Evolutions of Biomedical Ti-13Nb-13Zr Alloy Processed by Hydrostatic Extrusion

OZALTİN K., PANİGRAHİ A., CHROMİNSKİ W., Bulutsuz A., Kulczyk M., Zehetbauer M. J., et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.11, ss.5747-5755, 2017 (SCI-Expanded)

15. Influence of Surface Modification Methods on the Topography of Dental Implants by Using Metrological Observation Techniques

Bulutsuz A., MERCAN C. U., Karapinar G., Katiboglu A. B., LEWANDOWSKA M.

ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.625-627, 2016 (SCI-Expanded)

16. Measurement of temperature change during the implant site preparation to determine influence of tool characteristics

Bulutsuz A., Tanyel R. C., Katiboglu A. B.

MEASUREMENT , cilt.79, ss.354-359, 2016 (SCI-Expanded)

17. Optimization of end milling parameters and determination of the effects of edge profile for high surface quality of AISI H13 steel by using precise and fast measurements

Durakbasa M. N., AKDOĞAN A., Vanli A. S., Bulutsuz A.

MEASUREMENT , cilt.68, ss.92-99, 2015 (SCI-Expanded)

18. Enhancement in mechanical properties of a beta-titanium alloy by high-pressure torsion

Sharman K., Bazarnik P., Brynk T., Bulutsuz A., Lewandowska M., Huang Y., et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.4, sa.1, ss.79-83, 2015 (SCI-Expanded)

19. Application of fuzzy logic methodology for predicting dynamic measurement errors related to process parameters of coordinate measuring machines

Bulutsuz A., Yetilmezsoy K., Durakbasa N.

JOURNAL OF INTELLIGENT & FUZZY SYSTEMS , cilt.29, ss.1619-1633, 2015 (SCI-Expanded)

20. Importance of Measurement Parameters for the Dental Implant Surface Characterization

GUNAY A., SAĞBAŞ B., DURAKBASA M. N.

ACTA PHYSICA POLONICA A , cilt.125, sa.2, ss.484-487, 2014 (SCI-Expanded)

21. Development of Ann-Based Models to Predict Biogas and Methane Productions in Anaerobic Treatment of Molasses Wastewater

Yetilmezsoy K., Türkdoğan F. İ., Temizel I., Gunay A.

INTERNATIONAL JOURNAL OF GREEN ENERGY , cilt.10, ss.885-907, 2013 (SCI-Expanded) Sürdürülebilir Kalkınma

Diğer Dergilerde Yayınlanan Makaleler 8

1. Effect of Nb0.5 and Mo0.75 addition on in-vitro corrosion and wear resistance of high-speed laser metal deposited Al0.3CrFeCoNi high-entropy alloy coatings

Dikici B., Lindner T., Lampke T., Grund T., Günay Bulutsuz A.

APPLIED SURFACE SCIENCE ADVANCES , cilt.26, sa.26, ss.1-12, 2025 (ESCI)

2. Biyoçözünür İmplant Uygulamaları İçin Saf Çinko Tozlarından İnce Taneli Yapıların İmalatı ve Çözünme Davranışının Karakterizasyonu

Günay Bulutsuz A.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.9, sa.1, ss.467-469, 2021 (Hakemli Dergi)

3. Ha/Β-TCP Kumlama ve Anodizasyon İşlemlerinin Yüzey Kontak Açısına ve Topografyasına Etkilerinin İncelenmesi

Günay Bulutsuz A.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.8, sa.1, ss.1072-1083, 2020 (Hakemli Dergi)

4. Calculation of measurement uncertainty for plastic (ABS) material in flexural testing

Gunay Bulutsuz A., Fank S., Gülmez T., Durakbasa N.

International Journal of Metrology and Quality Engineering , cilt.4, sa.1, ss.29-33, 2013 (Scopus)

5. Dental İmplantolojide Kullanılan G4 Saf Titanyum İmplantların Kumlama ve Asitleme Teknikleriyle Oluşturulan Yüzey Modifi kasyonlarının İmalat Aşamalarını Ele Alarak Değerlendirilmesi

GÜNAY BULUTSUZ A., KATİBOĞLU A. B., M NUMAN D.

MÜHENDİS VE MAKİNA , cilt.54, 2013 (Hakemli Dergi)

6. Determining the Measurement Uncertainties to Fulfill the Demands on Product Quality

Akdoğan A., Günay Bulutsuz A.

ACADEMIC SCIENCE OF JOURNAL , cilt.2, sa.1, ss.243-247, 2013 (Hakemli Dergi)

7. Assessment of machining with uncoated and coated end mills and determining surface topography using 2D fast Fourier transform

Durakbasa M., Demircioglu P., Bogrekci I., Bas G., Gunay A.

International Journal of Nanomanufacturing , cilt.8, ss.493-507, 2012 (Scopus)

8. Surface Characterization by Accurate Measurementand Image Processing Systems on Machined Surfaces of Precision Cutting Tools

M NUMAN D., Ismail B., DEMİRCİOĞLU P., BAŞ G., GÜNAY BULUTSUZ A.

Journal of Automation, Mobile Robotics Intelligent Systems , cilt.3, ss.51-55, 2011 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 19

1. Unmanned Aircraft Wing Design Procedure: Analytical and Numerical Approach

Uyunmaz E., GÜNAY BULUTSUZ A.

24th International Symposium for Production Research, ISPR 2024, Budva, Karadağ, 10 - 12 Ekim 2024, ss.93-105, (Tam Metin Bildiri)

2. Effect of Equal Channel Angular Pressing Parameters on Meta-Stable Beta Titanium Alloy with Changeable Young ’ s Modulus

Mahmutoğlu M. A., Günay Bulutsuz A., Nakai M., Yapıcı G. G., Yılmazer H.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, cilt.1, ss.1013-1015, (Özet Bildiri)

3. Effect of Equal Channel Angular Pressing Parameters on Meta-Stable Beta Titanium Alloy with Changeable Young ’ s Modulus

Mahmutoğlu M. A., GÜNAY BULUTSUZ A., Nakai M., YAPICI G. G., Yilmazer H.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), 25 - 27 Nisan 2019, (Tam Metin Bildiri)

4. Continuous severe plastic deformation methods

GÜNAY BULUTSUZ A., Yurci M. E.

Materials Science and Technology 2018, MS and T 2018, 14 - 18 Ekim 2018, (Tam Metin Bildiri)

5. Investigation of Different Severe Plastic Deformation Methods Effect on Ti13Nb13Zr

GÜNAY BULUTSUZ A., Kadir Ö., Witold C., Yurci M. E., Lewandowska M.

Materials Science and Technology 2018, MS and T 2018, 14 - 18 Ekim 2018, (Tam Metin Bildiri)

6. Surface Modification of Ti6Al4V Type Dental Alloy in Acidic Medium

Gökçen E., Gürsoy Ö., GÜNAY BULUTSUZ A., Mercan Ç., Tan E., KATİBOĞLU A. B., et al.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018, (Tam Metin Bildiri)

7. Ultrasonic Assistance for Severe Plastic Deformation Applications

GÜNAY BULUTSUZ A., Yilmazer H.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018, (Özet Bildiri)

8. Geometrical Tolerances for Additive Manufacturing: An Overview

Sağbaş B., Günay Bulutsuz A.

2nd International Symposium on 3D Printing Technologies (3D-PTS2017), 3-4 April, 2017, Istanbul Turkey, İstanbul, Türkiye, 3 - 04 Nisan 2017, ss.1, (Tam Metin Bildiri)

9. High performance copper and copper alloys fabricated by severe plastic deformation

GÖKDUMAN A., YILMAZER H., GÖDE C., DİKİCİ B., DVORAK J., SKLENICKA V., et al.

3rd International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.75-78, (Tam Metin Bildiri)

10. Ultra Fine Grained Pure Titanium Grade 4 Surface Morphologies as Dental Implant Materials

Günay Bulutsuz A., Yeprem H. A., Yurci M. E.

Collaborative Conference on 3D & Materials Research, Seoul, Güney Kore, 20 - 24 Haziran 2016, (Özet Bildiri)

11. INFLUENCE OF SEVERE PLASTIC DEFORMATION ON TI13NB13ZR SURFACE MORPHOLOGY

GÜNAY BULUTSUZ A., YURCİ M. E., LEWANDOESKA M.

XXI IMEKO World Congress “Measurement in Research and Industry”, 30 Ağustos - 04 Eylül 2015, (Özet Bildiri)

12. INVESTIGATION CMM MEASUREMENT PARAMETERS EFFECT TO THE MEASUREMENT ERROR

GÜNAY BULUTSUZ A., YURCİ M. E., DURAKBAŞA M. N.

XXI IMEKO World Congress “Measurement in Research and Industry”, 30 Eylül - 02 Ekim 2015, (Özet Bildiri)

13. Estimation of Surface Modification Methods Effect on Topography of DentalImplants by Using Metrological Observation Techniques

GÜNAY BULUTSUZ A., ÇİĞDEM ÜNLÜ M., KARAPINAR G., KATİBOĞLU A. B., LEWANDOWSKA M.

International Congress on Biomaterials & Biosensors, 16 - 19 Nisan 2015, (Özet Bildiri)

14. Investigation of Dynamic Fatigue Effect on Marginal Fit and Microgaps ofDifferent Dental İmplant Abutment Interfaces

MERCAN Ç. Ü., GÜNAY BULUTSUZ A., KATİBOĞLU A. B.

5th International Advances in Applied Physics and Materials Science Congress & Exhibition, 16 - 19 Nisan 2015, (Özet Bildiri)

15. Measurement and Image Processing Evaluation of Surface Modifications of Dental Implants G4 Pure Titanium Created by Different Techniques

Bulutsuz A., Demircioglu P., Bogrekci I., Durakbasa M. N., Katiboglu A. B.

4th International Congress in Advances in Applied Physics and Materials Science (APMAS), Fethiye, Türkiye, 24 - 27 Nisan 2014, cilt.1653, (Tam Metin Bildiri)