Duyurular & Dokümanlar
Görüşme saatleri
Duyuru
26.02.2024
2024-25 BAHAR yarıyılı görüşme saatleri (Oda A Blok A511): Perşembe: 12.00-13.30; Cuma: 10.00-12.00
Dosya İndir
Araştırma Alanları
Makina Mühendisliği
Mekanik
Katı Cisimler Mekaniği
Sürekli Ortam Mekaniği
Mühendislik ve Teknoloji
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
2024
2024Elastic and Viscoelastic Analysis of Stress Distribution in Single Lap Joints under Tensile Loading: Analytical and Numerical Approaches
Bektaş İ. H., ÖZER H.
Latin American Journal of Solids and Structures
, cilt.21, sa.7, ss.1-28, 2024 (SCI-Expanded)
2024
2024Viscoelastic model to evaluate the shear and peel stresses in the two-adhesive bonded lap joints
Çay M., ÖZER H.
Journal of Adhesion Science and Technology
, cilt.38, sa.9, ss.1491-1522, 2024 (SCI-Expanded)
2024
2024Viscoelastic-adhesive modeling of hybrid adhesively bonded double-lap joints: analytical and numerical studies
Çay M., ÖZER H.
Journal of Adhesion
, 2024 (SCI-Expanded)
2022
2022Viscoelastic model to evaluate the shear stresses in the bi-adhesively bonded lap joints
ÖZER H., Cay M.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
, cilt.44, sa.11, 2022 (SCI-Expanded)
2022
2022Investigation of the effects of central rectangular gap located in the adhesive layer on failure load and joint stiffness
Oz O., ÖZER H., Elen N. C.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
, cilt.44, sa.5, 2022 (SCI-Expanded)
2020
2020Effect of loading rate on cohesive parameters of the adhesive Araldite 2015
Erbayrak E., Özer H.
MATERIALS TESTING
, cilt.62, ss.943-949, 2020 (SCI-Expanded)
2018
2018The effects of curing temperature on fracture energy and cohesive parameters for the adhesive Araldite 2015
ÖZER H., Erbayrak E.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
, cilt.32, sa.12, ss.1287-1312, 2018 (SCI-Expanded)
2017
2017The use of the exponential Drucker-Prager material model for defining the failure loads of the mono and bi-adhesive joints
ÖZER H., ÖZ Ö.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
, cilt.76, ss.17-29, 2017 (SCI-Expanded)
2017
2017An experimental investigation on the failure loads of the mono and bi-adhesive joints
ÖZ Ö., ÖZER H.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
, cilt.31, ss.2251-2270, 2017 (SCI-Expanded)
2014
2014Variational Principles for Bending and Vibration of Partially Composite Timoshenko Beams
Ozer H.
MATHEMATICAL PROBLEMS IN ENGINEERING
, 2014 (SCI-Expanded)
2014
2014A Comparative Evaluation of Numerical and Analytical Solutions to the Biadhesive Single-Lap Joint
ÖZER H., ÖZ Ö.
MATHEMATICAL PROBLEMS IN ENGINEERING
, 2014 (SCI-Expanded)
2014
2014On the von Mises elastic stress evaluations in the bi-adhesive single-lap joint: a numerical and analytical study
ÖZ Ö., ÖZER H.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
, cilt.28, sa.21, ss.2133-2153, 2014 (SCI-Expanded)
2012
2012Three dimensional finite element analysis of bi-adhesively bonded double lap joint
ÖZER H., ÖZ Ö.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
, cilt.37, ss.50-55, 2012 (SCI-Expanded)
2008
2008A variational formulation and analysis of polar orthotropic circular plates using an energy principle, part II: Thick plates
Ozer H.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS
, cilt.15, sa.1, ss.59-70, 2008 (SCI-Expanded)
2008
2008Application of the variational iteration method to thin circular plates
Ozer H.
INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION
, cilt.9, sa.1, ss.25-30, 2008 (SCI-Expanded)
2007
2007A comparative analysis of Mindlin and Kirchhoff bending solutions for nonlinearly tapered annular plate with free edges
Ozer H.
ARCHIVE OF APPLIED MECHANICS
, cilt.77, sa.6, ss.393-405, 2007 (SCI-Expanded)
2007
2007A Variational Formulation and Analysis of Polar Orthotropic Circular Plates Using an Energy Principle Part I Thin Plates
ÖZER H.
Science and Engineering of Composite Materials
, cilt.14, ss.317-328, 2007 (SCI-Expanded)
2007
2007Application of the variational iteration method to the boundary value problems with jump discontinuities arising in solid mechanics
Ozer H.
INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION
, cilt.8, sa.4, ss.513-518, 2007 (SCI-Expanded)
2004
2004A computer software for simulating single-compartmental model of neurons
Ozer M., Isler Y., Ozer H.
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE
, cilt.75, sa.1, ss.51-57, 2004 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
2018
2018Recent Advances in Adhesively Bonded Lap Joints Having Bi-Adhesive and Modulus-Graded Bondlines: A Critical Review
ÖZ Ö., ÖZER H.
REVIEWS OF ADHESION AND ADHESIVES
, cilt.6, sa.1, ss.82-103, 2018 (ESCI)
2018
2018EFFECT OF ADHESIVE TYPE ON FREE TRANSVERSE VIBRATION OF SINGLE LAP JOINT
ERBAYRAK E., ÖZER H., ERBAYRAK S., ÇEPER K., AĞIRKOL B., GÜNER E.
INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY , cilt.2, ss.104-107, 2018 (Hakemli Dergi)
2016
2016Hibrit Yapıştırma Düzeninin Bindirme Bağlantı Mukavemetine Etkileri
ÖZ Ö., ÖZER H.
Mühendis ve Makina , cilt.57, ss.63-72, 2016 (Hakemli Dergi)
2009
2009The Effects of the Aging Heat Treatment on Buckling Load of 7075 Aluminum Alloy Rectangular Plate
ÖZ Ö., ÖZER H.
e-Journal of New World Sciences Academy , cilt.8, ss.263-271, 2009 (Hakemli Dergi)
2003
2003Aspects of the Gurson Model and its Applications
ÖZER H., Günay D.
MATHEMATİCAL AND COMPUTATİONAL APPLİCATİONS , cilt.8, sa.3, ss.327-334, 2003 (Hakemli Dergi)
2001
2001Düz Dişlilerde Profil Kaydırma Faktörünün, Çatlak İlerleme Yolu Üzerindeki Etkisi (The Effect of Addendum Modification Coefficient on Crack Propogation Path at Addendum Modificated Gears)
ÖZER H., Günay D.
Makine Tasarımı ve İmalat Dergisi (Journal of Mechanical Design and Production) , cilt.4, sa.2, ss.89-95, 2001 (Hakemli Dergi)
1997
1997Enine Dikişli Kaynak Bağlantılarında Gerilme Analizi (Stress Analysis in the Transverse Fillet Weld Joints)
Elmas M., Aydemir A., Çaağlar N., ÖZER H.
Mühendislik Bilimleri Dergisi (Journal of Engineering Sciences) , cilt.3, sa.2, ss.323-329, 1997 (Hakemli Dergi)
1997
1997Düz Dişlilerde Jant Kalınlığının Diş Kökü Gerilmeleri Üzerindeki Etkisi (Effect of Rim Thickness on the Root Stresses of Spur Gear Tooth)
ÖZER H., Aydemir A.
Mühendislik Bilimleri Dergisi (Journal of Engineering Sciences) , cilt.3, sa.1, ss.299-303, 1997 (Hakemli Dergi)
1996
1996The Effect of Addendum Modification Coefficient on Tooth Stresses of Spur Gear
ÖZER H., Aydemir A.
MATHEMATİCAL AND COMPUTATİONAL APPLİCATİONS , cilt.1, sa.1, ss.36-43, 1996 (Hakemli Dergi)
1996
1996Torsional Stresses in the Transverse Fillet Weld Tubular Joints
ÖZER H., Aydemir A.
MATHEMATİCAL AND COMPUTATİONAL APPLİCATİONS , cilt.1, sa.1, ss.29-35, 1996 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2019
2019Variational Approach for Solving Nonlinear Differential Equations Arising in Functionally Graded Adhesive Joints
ÖZER H.
Euro Asia 4. International Congress on Applied Sciences, KIEV, Ukrayna, 27 - 29 Eylül 2019, ss.30
2019
2019NUMERICAL INVESTIGATION OF DYNAMIC BEHAVIOR OFCOMPOSITE BEAMS CONNECTED WITH SINGLE-LAP JOINT
USAL M. M. A., ÖZER H.
International Natural Science, Engineering and Materials Technology Conference, 9 - 10 Eylül 2019
2019
2019Study on the Self-Healing Efficiency of Araldite Av138M Adhesive
ERBAYRAK E., ÖZER H.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, (Tam Metin Bildiri)
2018
2018Çekmeye Maruz Köşeleri Yuvarlatılmış Basamaklı BindirmeBağlantısının Gerilme Analizi
ÇALIK A., ÖZER H.
3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Türkiye, 24 - 26 Ekim 2018, cilt.1, ss.1634-1635
2018
2018Sultan II. Abdülhamid Döneminde Osmanlıda Tarihi
KOYUN A., ÖZER H., ŞAHİN İ., KIYAK M.
Vefatının 100. Yılında Sultan II. Abdülhamid ve Dönemi Uluslararası Kongresi, İstanbul, Türkiye, 22 Ekim 2018, ss.390-391, (Tam Metin Bildiri)
2018
2018Sultan II. Abdülhamid Döneminde Osmanlıda Teknoloji
Koyun A., Özer H., Şahin İ., Kıyak M.
Vefatının 100. Yılında Sultan II. Abdülhamid ve Dönemi Uluslararası Kongresi, İstanbul, Türkiye, 22 - 24 Ekim 2018, ss.390-391
2017
2017EFFECT OF ADHESIVE TYPE ON FREE TRANSVERSE VIBRATION OF SINGLE LAP JOINT
ERBAYRAK E., ÖZER H., ERBAYRAK S., çeper k., ağırkol b., güner e.
3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 201719-21 December 2017, Yildiz Technical University, Istanbul, Turkey, 19 - 21 Aralık 2017
2017
2017Evaluating the Repair Performance of the Cracked Plate Using Adhesive Shear Stresses
ÖZER H., Çay M.
5th International Symposium on Innovative Technologies inEngineering and Science, Baku, Azerbaycan, 29 - 30 Eylül 2017, ss.1746-1752
2017
2017ADHESIVE-RECESSING EFFECT ON SHEAR STRESSES ARISING IN SINGLE LAP JOINT
ÖZ Ö., ÇEVİK ELEN N., ÖZER H.
Uluslararası Mühendislik Araştırmaları Sempozyumu, Düzce, Türkiye, 11 - 13 Eylül 2017
2016
2016Numerical and Analytical Investigations on The Stress Distributions in Single Lap Joints
ÖZ Ö., ÖZER H.
4th International Symposium on Innovative Technologies in Engineering and Science (ISITES2016), Antalya, Türkiye, 3 - 05 Kasım 2016, ss.625-634
2016
2016Experimental Determination of Mode I Fracture Toughness of Araldite AV138M Adhesive
ERBAYRAK E., Özer H., Erbayrak S.
5th International Conference on Fracture and Damage Mechanics, 01 Eylül 2016
2015
2015EXPERIMENTAL AND NUMERICAL STUDY ON DETERMINATION OF CRITICAL BUCKLING LOAD FOR SINGLE LAP JOINT
ERBAYRAK E., Özer H., Özertuğ B., Özbek T., Özdemir Y.
INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS, 01 Aralık 2015
2015
2015Effect of Loading Rate on Fracture Energy and Cohesive Parameters of Araldite 2015
ÖZER H.
01 Temmuz 2015
2015
2015Effect of Loading Rate on Fracture Energy and Cohesive Parameters of Araldite 2015. 3rd International Conference on Structural Adhesive Bonding
Özer H.
3rd International Conference on Structural Adhesive Bonding, 01 Temmuz 2015
2015
2015Stiffness Prediction for Bi adhesive Single Lap joints
ÖZ Ö., ÖZER H.
1st International Conference on Engineering and Natural Sciences (ICENS), Skopje, Makedonya, 15 - 19 Mayıs 2015
2015
2015Effects of the Mono and Bi adhesive Bondlines on the Shear Stresses in a Cracked Plate Repaired by the Boron epoxy Patch
ÖZER H., Çay M.
International Conference on Advances in Mechanical Engineering (ICAME'15), İstanbul, Türkiye, 13 - 15 Mayıs 2015
2014
2014Vakum Ortamında Karıştırma İşleminin Araldite 2015 Epoksi Yapıştırıcının Hasar Yükü Üzerine Etkisi
ÖZ Ö., ÖZER H.
15th International Materials Symposium (IMSP’2014), Denizli, Türkiye, 15 - 17 Ekim 2014, ss.1-8
2014
2014Determination of Mode 1 Fracture Toughness for Araldite 2015 Epoxy A Comparative Study
ERBAYRAK E., ÖZER H.
31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten, Almanya, 24 Eylül - 27 Nisan 2014, ss.19-20
2012
2012Comparative Analysis of the Beam Length Effect on Free Vibration of Cracked Beams
ÖZER H., Ornek M. A.
01 Temmuz 2012
2011
2011Joint Stress Optimization by the Hybrid Adhesive Lap Joint
ÖZER H., ÖZ Ö.
14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.1000-1001
2011
2011Free Vibration Analysis of Beam with Multiple Cracks
ÖZER H., Ornek M.
01 Ağustos 2011, (Tam Metin Bildiri)
2011
2011Three Dimensional Finite Element Analysis of Bi Adhesively Bonded Double Lap Joint
ÖZER H., ÖZ Ö.
International Conference on Structural on Adhesive Bonding (AB 2011), Porto, Portekiz, 7 - 08 Temmuz 2011
2001
2001Mühendis ve Mühendisliğin Konumu
GÜNAY D., ÖZER H.
IV. Ulusal Makina Mühendisliği ve Eğitimi Sempozyumu, İstanbul, Türkiye, 1 - 03 Kasım 2001, ss.83-94
2001
2001Düz Dişlilerde Çatlak Probleminin Sonlu Elemanlar Metodu ile İncelenmesi (An investigating of Crack Problem at Spur Gears by the Finite Element Method)
ÖZER H., Günay D.
01 Eylül 2001
1996
1996Düz Dişlilerde Dişkökü Gerilmelerinin Sonlu Elemanlar Yöntemiyle Analizi (An Analysis of Root Stresses of Spur Gear Tooth by the Finite Element Method)
ÖZER H., Aydemir A.
01 Eylül 1996
0
0Stress Analysis of Human Tibia under Torsional Loading
ÖZER H., Ornek M., Nazlım A., Gündoğdu S.
(Tam Metin Bildiri)
0
0Research on Computer Modelling of a Crack and Crack Propogation in the Gear Tooth Fillet
ÖZER H., Günay D.
(Tam Metin Bildiri)
0
0Artificial Neural Network Approach to Buckling Coefficients of Laminated Orthotropic Rectangular Plates with a Centerally Rectangular Hole
Özyiğit H., ÖZER H.
0
0Düz Dişlilerde Çatlak İlerleme Yolunun Lineer Elastik Kırılma Mekaniği Yaklaşımı ile Belirlenmesi
ÖZER H., Günay D.
0
0Determination of Mode 1 Fracture Toughness for Araldite 2015 Epoxy: A Comparative Study. 31st Danubia Adria Symposium on Advances in Experimental Mechanics
ERBAYRAK E., Özer H.
31st Danubia Adria Symposium on Advances in Experimental Mechanics
0
0Variational Iteration Method for Solving Boundary Value Problems with Jump Discontinuities
ÖZER H.
0
0Stress Analysis of Human Tibia under Compressive Loading
ÖZER H., Nazlım A., Örnek M., Gündoğdu S.
Kitaplar
2019
2019Recent Advances in Adhesively Bonded Lap Joints Having Bi‐Adhesive and Modulus‐Graded Bondlines: A Critical Review
ÖZ Ö., ÖZER H.
Progress in Adhesion and Adhesives, K.L. Mittal, Editör, Scrivener Publishing LLC, ss.77-97, 2019
2018
2018Introductory Chapter: Structural Adhesive Bonded Joints
ÖZER H.
Applied Adhesive Bonding in Science and Technology, Özer H., Editör, Intech, Rijeka, ss.3-10, 2018
2018
2018Introductory Chapter: Structural Adhesive BondedJoints
ÖZER H.
Applied Adhesive Bonding in Science and Technology, Halil Özer, Editör, IntechOpen, Londrina, ss.3-10, 2018
2016
2016