Arş. Gör. Yusuf Furkan YAPAN

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Machinability assessment and optimization of turning AISI H11 steel under various minimum quantity lubrication (MQL) conditions using nanofluids

Hamdi A., YAPAN Y. F., UYSAL A., Merghache S. M.

International Journal of Advanced Manufacturing Technology , cilt.137, sa.7, ss.4089-4107, 2025 (SCI-Expanded)

Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions

Yapan Y. F., Türkeli K., Emiroğlu U., Bahçe E., Uysal A.

International Journal of Precision Engineering and Manufacturing - Green Technology , cilt.12, sa.2, ss.409-430, 2025 (SCI-Expanded) Sürdürülebilir Kalkınma

A novel approach to enhance formability in Ti-6Al-4V alloy: Experimental investigations and microstructural analysis of pulsating tensile test

Korkmaz H. G., Toros S., Korkmaz H. G., Türköz M., YAPAN Y. F.

CIRP Journal of Manufacturing Science and Technology , cilt.55, ss.98-107, 2024 (SCI-Expanded)

The effects of minimum quantity lubrication parameters on the lubrication efficiency in the turning of plastic mold steel

Hamdi A., YAPAN Y. F., UYSAL A., Merghache S. M.

International Journal of Advanced Manufacturing Technology , cilt.132, sa.11-12, ss.5803-5821, 2024 (SCI-Expanded)

Experimental and numerical investigation of the damage state of Ti-6Al-4V alloy sheet in the tensile test, hydraulic bulging, and hydroforming processes

Yapan Y. F., Korkmaz H. G., Toros S., Türköz M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.1, sa.1, ss.1-21, 2024 (SCI-Expanded)

Enhancing formability of Ti-6Al-4V cylindrical cups by pulsating hydroforming process: Experimental, numerical and microstructural investigations

Öztürk O., Aydın M., Gökçepınar Ö. F., İlbeyli H. M., Korkmaz H. G., Yapan Y. F., et al.

ENGINEERING SCIENCE AND TECHNOLOGY, AN INTERNATIONAL JOURNAL , cilt.50, ss.1-15, 2024 (SCI-Expanded)

Influence of singular and dual MQL nozzles on sustainable milling of Al6061-T651 in different machining environments

Cönger D. B., Yapan Y. F., Emiroğlu U., Uysal A., Altan E.

JOURNAL OF MANUFACTURING PROCESSES , cilt.109, ss.524-536, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation of ultrasonic vibration assisted orthogonal turning under dry and minimum quantity lubrication conditions and performing sustainability analyses

Duman E., Yapan Y. F., Salvi H., Sofuoğlu M. A., Khanna N., Uysal A.

JOURNAL OF CLEANER PRODUCTION , cilt.434, ss.1-16, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation of MQL and CNC turning parameters on the machinability of unreinforced polypropylene: study of surface roughness, temperature, and specific cutting energy

Hamdi A., Yapan Y. F., Uysal A., Merghache S. M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.130, ss.717-730, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

Sustainability assessment and optimization for milling of compacted graphite iron using hybrid nanofluid assisted minimum quantity lubrication method

Demir U., Yapan Y. F., Uysal A., Uslu Uysal M.

SUSTAINABLE MATERIALS AND TECHNOLOGIES , cilt.38, ss.1-16, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Multi-objective analysis and optimization of energy aspects during dry and MQL turning of unreinforced polypropylene (PP): an approach based on ANOVA, ANN, MOWCA, and MOALO

Hamdi A., Yapan Y. F., Uysal A., Abderazek H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.1, ss.1-18, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Microstructural Characterization of Improved Formability of Ti-6Al-4V Sheet by Pulsating Hydraulic Bulging at Room Temperature

Yapan Y. F., Öztürk O., Türköz M., Dilmeç M., Livatyalı H., Halkacı H. S., et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.32, ss.6258-6269, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Assessment of turning AISI 316L stainless steel under MWCNT-reinforced nanofluid-assisted MQL and optimization of process parameters by NSGA-II and TOPSIS

Oussama B., Yapan Y. F., Uysal A., Abdelhakim C., Mourad N.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.1, ss.1-14, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Orthogonal turning of AISI 310S austenitic stainless steel under hybrid nanofluid-assisted MQL and a sustainability optimization using NSGA-II and TOPSIS

Saatçi E., Yapan Y. F., Uslu Uysal M., Uysal A.

SUSTAINABLE MATERIALS AND TECHNOLOGIES , cilt.36, ss.1-18, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation on the effect of hybrid nanofluid in MQL condition in orthogonal turning and a sustainability assessment

Usluer E., Emiroğlu U., Yapan Y. F., Kshitij G., Khanna N., Sarıkaya M., et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES , cilt.36, ss.1-14, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Diğer Dergilerde Yayınlanan Makaleler

Examining the Effect of the Fe3O4-Doped Nanofluid MQL Method on the Machining Performance of Al-Mg-Si Alloy

Yücel M., Aydın A., Sağdıç Ö. F., Yapan Y. F., Uysal A.

Advances in Machinery, Materials Science and Engineering Application X , cilt.58, ss.148-153, 2024 (Scopus) Sürdürülebilir Kalkınma

Experimental investigation and optimization of hybrid turning of Ti6Al7Nb alloy under nanofluid based MQL by TOPSIS method

DUMAN E., YAPAN Y. F., SOFUOĞLU M. A.

Journal of Advances in Manufacturing Engineering , cilt.4, sa.2, ss.35-45, 2023 (Hakemli Dergi)

Surface Roughness Assessment After Milling of Pure and Carbon Black Reinforced Polypropylene Materials

Akın A. H., Yapan Y. F., Kusyj Y., Ivanov V., Uysal A.

LECTURE NOTES IN MECHANICAL ENGINEERING , cilt.1, ss.251-263, 2023 (Scopus)

Ultra Yüksek Basınçta Çalışan Kalın Cidarlı Silindirlerin Tasarımına Etki Eden Parametrelerin Sayısal ve Analitik Olarak Araştırılması

AYDIN M., TÜRKÖZ M., YAPAN Y. F.

SELCUK UNIVERSITY JOURNAL OF ENGINEERING, SCIENCE AND TECHNOLOGY , cilt.10, sa.2, ss.412-424, 2022 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

CoCoSo Method-Based Evaluation of Cutting Parameters in Turning of AISI 1040 Steel Under Plain and Nano MoS2 Reinforced Cutting Fluid Assisted MQL Methods

Günay Y., YAPAN Y. F., Dzhemalyadinov R., Dzhemilov E., UYSAL A.

6th Grabchenko’s International Conference on Advanced Manufacturing Processes, InterPartner 2024, Odessa, Ukrayna, 10 - 13 Eylül 2024, ss.290-299

ANALYSIS AND OPTIMIZATION OF MILLING PROCESS OF DIN 1.2738 MOLD STEEL USING NANOFLUID ASSISTED MQL METHOD

AYDIN M., GÜNAY Y., YAPAN Y. F., LİVATYALI H., UYSAL A.

Proceedings of 12th UTIS International Congress on Machining, Antalya, Türkiye, 1 - 03 Kasım 2024, cilt.1, ss.79-92, (Tam Metin Bildiri)

Investigation of the microstructural reasons for the increase in formability of Ti-6Al-4V alloy by pulsating hydraulic bulging

YAPAN Y. F., ÖZTÜRK O., TÜRKÖZ M., DİLMEÇ M., LİVATYALI H., HALKACI H. S., et al.

Materials Science and Engineering Congress (MSE), Darmstadt, Almanya, 27 - 29 Eylül 2022, (Özet Bildiri)

Kitaplar

Ultrasonic Vibration-Assisted Machining with Minimum Quantity Lubrication for Aerospace Materials

Duman E., Yapan Y. F., Uysal A., Sofuoğlu M. A.

Advances in Manufacturing for Aerospace Alloys, Selim Gürgen, Editör, Springer Nature, Eskişehir, ss.47-76, 2024 Sürdürülebilir Kalkınma

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

110

H-İndeks (Scholar)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları