Prof. Dr. Ali PINARBAŞI

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 23

1. A numerical study on fluid maldistribution in swirl generator distributors

International Journal of Refrigeration , cilt.178, ss.367-378, 2025 (SCI-Expanded)

2. An experimental study on the determination of a hermetic reciprocating compressor’s discharge and suction losses

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , cilt.238, sa.3, ss.1330-1344, 2024 (SCI-Expanded)

3. Investigating a Hermetic Reciprocating Compressor Performance under Variable Lift Limiter Height using FSI Method

Bacak A., Pınarbaşı A., Dalkılıç A. S.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART E: JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.1, sa.2, ss.1-15, 2024 (SCI-Expanded)

4. The impact of turbulence and combustion models on flames and emissions in a low swirl burner

Cellek M. S., Pınarbaşı A., Coşkun G.

FUEL , cilt.343, sa.2, ss.1-15, 2023 (SCI-Expanded)

5. A 3-D FSI SIMULATION FOR THE PERFORMANCE PREDICTION AND VALVE DYNAMIC ANALYSIS OF A HERMETIC RECIPROCATING COMPRESSOR

Bacak A., Pınarbaşı A., Dalkiliç A. S.

INTERNATIONAL JOURNAL OF REFRIGERATION , cilt.150, sa.2, ss.135-148, 2023 (SCI-Expanded)

6. Experimental investigation of effect of different tube row-numbers, fin pitches and operating conditions on thermal and hydraulic performances of louvered and wavy finned heat exchangers

Okbaz A., PINARBAŞI A., Olcay A. B.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.151, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

7. An experimental, computational and flow visualization study on the air-side thermal and hydraulic performance of louvered fin and round tube heat exchangers

Okbaz A., Pınarbaşı A., Olcay A. B., Hilmi Aksoy M.

International Journal of Heat and Mass Transfer , cilt.121, ss.153-169, 2018 (SCI-Expanded)

8. Investigations on performance and emission characteristics of an industrial low swirl burner while burning natural gas, methane, hydrogen-enriched natural gas and hydrogen as fuels

Cellek M. S., Pınarbaşı A.

International Journal of Hydrogen Energy , cilt.43, ss.1194-1207, 2018 (SCI-Expanded)

9. The effect of pressure gradient on boundary layer receptivity

Johnson M. W., Pinarbaşi A.

Flow, Turbulence and Combustion , cilt.93, ss.1-24, 2014 (SCI-Expanded)

10. Turbulence measurements in the inlet plane of a centrifugal compressor vaneless diffuser

Pinarbaşi A.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , cilt.30, ss.266-275, 2009 (SCI-Expanded)

11. Effect of impeller-diffuser radial gap ratio in a centrifugal pump

ÖZTÜRK A., AYDIN K., ŞAHİN B., Pinarbasi A.

JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH , cilt.68, sa.3, ss.203-213, 2009 (SCI-Expanded)

12. Experimental hot-wire measurements in a centrifugal compressor with vaned diffuser

Pinarbaşi A.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , cilt.29, ss.1512-1526, 2008 (SCI-Expanded)

13. Wedge type vaned diffuser flow measurements in a low speed centrifugal compressor

Temel U. N., Ozturk A., Pinarbasi A.

JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH , cilt.67, sa.10, ss.788-796, 2008 (SCI-Expanded)

14. Computation of flow in a target fluidic flowmeter

Pinarbaşi A.

Journal Of Scientific & Industrial Research , cilt.67, sa.9, ss.697-702, 2008 (SCI-Expanded)

15. Measurements of Reynolds stresses in centrifugal compressor vaned diffusers

Pinarbaşi A., Guleren K. M., Öztürk A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.222, ss.1487-1503, 2008 (SCI-Expanded)

16. Flow analysis in a centrifugal compresor vaneless diffusers

Pinarbaşi A.

Journal Of Scientific & Industrial Research , cilt.67, sa.5, ss.348-355, 2008 (SCI-Expanded)

17. Large-eddy simulation of the flow in a low-speed centrifugal compressor

Güleren K. M., Turan A., Pinarbaşi A.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS , cilt.56, sa.8, ss.1271-1280, 2008 (SCI-Expanded)

18. Numerical simulation of the stalled flow within a vaned centrifugal pump

Guleren K., Pinarbasi A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.218, ss.425-435, 2004 (SCI-Expanded)

19. The flow structure during onset and developed states of rotating stall within a vaned diffuser of a centrifugal pump

Sinha M., Pinarbaşi A., Katz J.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.123, sa.3, ss.490-499, 2001 (SCI-Expanded)

20. Detailed stress tensor measurements in a centrifugal compressor vaneless diffuser

Pinarbaşi A., Johnson M.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME , cilt.118, ss.394-399, 1996 (SCI-Expanded)

21. Three-dimensional flow measurements in conical and straight wall centrifugal compressor vaneless diffusers

Pinarbaşi A., Johnson M.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.210, ss.51-61, 1996 (SCI-Expanded)

22. Off-design flow measurements in a centrifugal compressor vaneless diffuser

Pinarbaşi A., Johnson M.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME , cilt.117, ss.602-608, 1995 (SCI-Expanded)

23. DETAILED FLOW MEASUREMENTS IN A CENTRIFUGAL-COMPRESSOR VANELESS DIFFUSER

Pinarbaşi A., Johnson M.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME , cilt.116, ss.453-461, 1994 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler 3

1. Panjur Kanatlı Isı Değiştiricilerinin Performansının Deneysel ve Hesaplamalı Akışkanlar Dinamiği Yaklaşımı ile İncelenmesi

Okbaz A., Onbaşıoğlu H., Olcay A. B., Pınarbaşı A.

Mühendis ve Makina , cilt.58, sa.687, ss.41-45, 2017 (Hakemli Dergi)

2. Dalgalı Kanatlı Isı Değiştiricilerinin Isıl ve Hidrolik Performansının Hesaplamalı Akışkanlar Dinamiği Yaklaşımı ile İncelenmesi

Bardakçı A. T., Okbaz A., Doğan A., Pınarbaşı A.

MMO Tesisat Mühendisliği Dergisi , sa.159, ss.5-14, 2017 (Hakemli Dergi)

3. Optimum Distance between vortex generators used in modern thermal systems

Özgün C., Nazlı C., Yılamz F., Pinarbaşi A.

European Scientific Journal , cilt.1, sa.1, ss.130-138, 2014 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 45

1. COMPARISON OF TEST AND SIMULATION VALUES OF AIR CONSUMPTION IN PNEUMATIC CYLINDERS

Okur Y. E., Pinarbaşi A.

5. International Mediterranean Scientific Research Congress, Mersin, Türkiye, 13 - 14 Ocak 2024, ss.373-374, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

2. INVESTIGATION THE EFFECT OF A DISTRIBUTOR USING A SUPERSONIC NOZZLE ON THE COOLING SYSTEM

Coşar I., Pinarbaşi A.

3rd INTERNATIONAL CONFERENCE ON HEALTH, ENGINEERING AND APPLIED SCIENCES, Tirane, Arnavutluk, 17 - 19 Kasım 2023, ss.1, (Tam Metin Bildiri)

3. Experimental and Numerical Investigation of the Discharge Valve Limiter Geometric Features Change on Compressor Thermal Efficiency

Ekemen A., Pinarbaşi A., Şahin C., Yildirim A.

13th International Conference on Compressors and their Systems, London, İngiltere, 11 - 13 Eylül 2023, ss.445-455, (Tam Metin Bildiri)

4. Investigation of Thermodynamic Exhaust Line Losses of Hermetic Piston Compressor by FSI Method

Bacak A., Pınarbaşı A.

1st International Conference on Trends in Advanced Research, Konya, Türkiye, 4 - 07 Mart 2023, ss.345-353, (Tam Metin Bildiri)

5. Numerical Investigation of Aerodynamic Analysis on Passenger Vehicle

Pınar C. G., Coşar İ., Uzun S., Cebeci A., Ersoy M. A., Pınarbaşı A.

International Conference on Automotive and Mechanical Engineering, İstanbul, Türkiye, 27 - 28 Haziran 2022, cilt.1, sa.1, ss.1, (Tam Metin Bildiri)

6. EKSPONANSİYEL POLİNOM BAZLI WENO ŞEMASI İLE EULER GAZ DİNAMİĞİ DENKLEMLERİNİN SAYISAL ÇÖZÜMÜ

Yılmaz E., Pınarbaşı A.

3. uluslararası mühendislik bilimleri ve multidisipliner yaklaşımlar kongresi, İstanbul, Türkiye, 10 - 11 Şubat 2022, cilt.1, sa.1, ss.497-504, (Tam Metin Bildiri)

7. Flow Rate Increase In The Forward Curved Centrifugal Fan Using Cfd Simulations

Özerk K., Pinarbaşi A.

5th International Conference On Advances In Mechanical Engineering , İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1-10, (Tam Metin Bildiri)

8. Discussions on Critical Velocity in Tunnel Fires

Tunç Ö., Hataysal E., Doğan A., Pinarbaşi A.

5th International Conference On Advances In Mechanical Engineering, İstanbul, Türkiye, 17 - 19 Aralık 2019, cilt.1, sa.1, ss.1125-1129, (Tam Metin Bildiri)

9. Effects Of Thermal Load And Excess Air Coefficient On Combustion Products In A Natural Gas-Fired Burner-Boiler

Cellek M. S., Pinarbaşi A.

5th International Conference On Advances In Mechanical Engineering , İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1-5, (Tam Metin Bildiri)

10. Organic Rankine Cycles For Natural Gas Fired Engine Waste Heat Recovery Using Both Exhaust Gas And Jacket Water Heat Sources

Doğan A., Kayaci N., Pinarbaşi A.

CTST’19 22th Congress of Thermal Sciences and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019, ss.1-7, (Tam Metin Bildiri)

11. Yatay Boru İçindeki Amonyak (R717) Yoğuşma Isı Transferi ve Basınç Kaybının Mevcut Korelasyonlar İle İncelenmesi

Bacak A., Pinarbaşi A., Onbaşıoğlu H.

14. ULUSAL TESİSAT MÜHENDİSLİĞİ KONGRESİ, İzmir, Türkiye, 17 - 20 Nisan 2019, cilt.1, sa.1, ss.597-604, (Tam Metin Bildiri)

12. Thermodynamic Analyses and Optimization Study Of Organic Rankine Cycle Usage with Internal Combustion Engine Waste Heat

Talu Y. E., PINARBAŞI A., DOĞAN A., Ulusoy I.

Eregli International Science and Academic Congress, Konya, Türkiye, 09 Mart 2019, cilt.1, sa.1, ss.73-83, (Tam Metin Bildiri)

13. Numerical Investigation of Acoustics Performance of Low- Pressure Ducted Axial Fan by Using Different Turbulence Models

Bacak A., Pinarbaşi A.

3rd International Conference on Computational Mathematics and Engineering Sciences, Girne, Kıbrıs (Kktc), 4 - 08 Mayıs 2018, ss.1-8, (Tam Metin Bildiri)

14. Eksenel Fan Akustik Performansının Sayısal Olarak İncelenmesi

Bacak A., Pinarbaşi A.

4.. ULUSLARARASI KATILIIMLI ANADOLU ENERJİ SEMPOZYUMU 18--20 NİSAN 2018 TRAKYA ÜNİVERSİİTESİ, Edirne, Türkiye, 18 Nisan 2018, ss.1-6, (Tam Metin Bildiri)