Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

A comparative study on the identification methods for calibration of the orthotropic yield surface and its effect on the sheet metal forming simulations

ŞENER B.
Archive of Applied Mechanics , cilt.94, sa.10, ss.3049-3069, 2024 (SCI-Expanded) identifier

Parameter identification of Yoshida-Uemori combined hardening model by using a variable step size firefly algorithm

ŞENER B.
Materialpruefung/Materials Testing , cilt.66, sa.8, ss.1292-1300, 2024 (SCI-Expanded) identifier

Investigation of the influence of plane strain constrained anisotropic plastic flow on the localized necking prediction

Şener B.
Engineering Computations (Swansea, Wales) , cilt.41, sa.4, ss.966-990, 2024 (SCI-Expanded) identifier

A Numerical Prediction for Hole-Splitting Damage of DP Steels Based on Plastic Work Criterion Using a Polynomial Stress Potential

Firat M., Akşen T., ŞENER B., ESENER E.
Experimental Techniques , cilt.48, sa.3, ss.501-522, 2024 (SCI-Expanded) identifier

Evaluation of ductile fracture criteria in combination with a homogenous polynomial yield function for edge splitting damage of DP steels

Akşen T. A., ŞENER B., ESENER E., Firat M.
Materialpruefung/Materials Testing , cilt.65, sa.6, ss.824-843, 2023 (SCI-Expanded) identifier

A Numerical Evaluation of Forming Failure of an Aluminum Sheet due to Splitting Damage in Hole Expansion Process

Aksen T. A., ŞENER B., Firat M.
Journal of Testing and Evaluation , cilt.51, sa.4, 2023 (SCI-Expanded) identifier identifier

Earing prediction of 2090-T3 aluminum-cups using a complete homogenous fourth-order polynomial yield function

Firat M., ŞENER B., Akşen T. A., ESENER E.
Materialpruefung/Materials Testing , cilt.64, sa.10, ss.1480-1494, 2022 (SCI-Expanded) identifier identifier

Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations

Habraken A. M., Aksen T. A., Alves J. L., Amaral R. L., Betaieb E., Chandola N., et al.
International Journal of Material Forming , cilt.15, sa.5, 2022 (SCI-Expanded) identifier identifier identifier

Effects of process parameters on the formability of sheet metal during plastic injection forming

ŞEN M., ŞENER B., EKŞİ ALTAN M.
Materialpruefung/Materials Testing , cilt.62, sa.5, ss.535-543, 2020 (SCI-Expanded) identifier identifier

Optimum spatial variable blank holder forces determined by the sequential response surface method (SRSM) and a hybrid algorithm

Şener B., Yurci M. E., Bogoclu M. E.
MATERIALS TESTING , cilt.61, ss.353-361, 2019 (SCI-Expanded) identifier identifier

The Effects of Anisotropic Yield Functions on Plastic Behavior of 304 Stainless Steel

Şener B., Yurci M. E.
JOURNAL OF TESTING AND EVALUATION , cilt.46, ss.2584-2591, 2018 (SCI-Expanded) identifier identifier

Numerical parameters for deep drawing simulation of a double bowl sink

Şener B., Yurci M. E.
MATERIALS TESTING , cilt.59, ss.480-484, 2017 (SCI-Expanded) identifier identifier

Comparison of Quasi-Static Constitutive Equations and Modeling of Flow Curves for Austenitic 304 and Ferritic 430 Stainless Steels

Şener B., Yurci M. E.
ACTA PHYSICA POLONICA A , cilt.131, ss.605-607, 2017 (SCI-Expanded) Creative Commons License identifier identifier

Numerical and Experimental Investigation of Friction Effect in Limiting Dome Height Test

Şener B., Kayali E. S.
JOURNAL OF TESTING AND EVALUATION , cilt.44, ss.1580-1584, 2016 (SCI-Expanded) identifier identifier

Optimization of process parameters for rectangular cup deep drawing by the Taguchi method and genetic algorithm

Şener B., Kurtaran H.
MATERIALS TESTING , cilt.58, ss.238-245, 2016 (SCI-Expanded) identifier identifier

MODELING THE DEEP DRAWING OF AN AISI 304 STAINLESS-STEEL RECTANGULAR CUP USING THE FINITE-ELEMENT METHOD AND AN EXPERIMENTAL VALIDATION

Şener B., Kurtaran H.
MATERIALI IN TEHNOLOGIJE , cilt.50, ss.961-965, 2016 (SCI-Expanded) Creative Commons License identifier identifier

Lubrication effects during biaxial stretch forming of galvanized steel compared to interstitial-free steel

Şener B., Kayalı E. S., Küçükyıldırım B. O.
Materialpruefung/Materials Testing , cilt.56, ss.962-968, 2014 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

On the effect of numerical parameters in finite element through thickness modeling for springback prediction

ŞENER B., Aksen T. A., ESENER E., Firat M.
Research on Engineering Structures and Materials , cilt.8, sa.4, ss.799-809, 2022 (Scopus) identifier identifier

Investigation of the Prediction Capability of Yld89 Yield Criterion for Highly Anisotropic Sheet Materials

Şener B.
Journal of Advances in Manufacturing Engineering , cilt.2, sa.1, ss.7-13, 2021 (Hakemli Dergi)

On the Effect of Through-Thickness Integration for the Blank Thickness and Ear Formation in Cup Drawing FE Analysis

ŞENER B., AKSEN T. A., FIRAT M.
European Mechanical Science , cilt.5, sa.2, ss.51-55, 2021 (Hakemli Dergi) identifier

Modeling plastic anisotropy evolution of AISI 304 steel sheets by a polynomial yield function

ŞENER B., ESENER E., Firat M.
SN Applied Sciences , cilt.3, sa.2, 2021 (ESCI) identifier identifier

YLD 2000 akma fonksiyonu parametrelerinin belirlenmesinde ardışık kuadratik programlama ve aktif set metotlarının performanslarının incelenmesi

ŞENER B.
Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.10, sa.2, ss.763-769, 2021 (Hakemli Dergi) identifier

Description of Anomalous Behavior of Aluminum Alloys with Hill48 Yield Criterion by Using Different Experimental Inputs and Weight Coefficients

ŞENER B.
Journal of Applied and Computational Mechanics , cilt.7, sa.3, ss.1606-1619, 2021 (ESCI) identifier identifier

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Influence of the calibration test on the fracture initiation prediction in rectangular cup drawing process

Aksen T. A., ŞENER B., ESENER E., Firat M.
3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2023, İstanbul, Türkiye, 4 - 06 Ekim 2023, cilt.61, ss.260-267 identifier

Fracture forming limit curve prediction by ductile fracture models

Aksen T. A., ŞENER B., ESENER E., Kocabiçak Ü., Firat M.
3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2023, İstanbul, Türkiye, 4 - 06 Ekim 2023, cilt.61, ss.268-276 identifier

Investigation of the Characteristics of AA6060 Alloy Under Three-Point Bending Using Experimental and Numerical Methodologies

Demir D., Şener B., Esener E.
7th International Conference on Computational Mathematics and Engineering Sciences, Elazığ, Türkiye, 20 - 21 Mayıs 2023, ss.139-147

Numerical Investigation of Factors Affecting the Material Flow in Square Cup Deep Drawing

Acar M., Şener B.
International Conference and Emerging Sources in Science (ESCICONF 2022), İstanbul, Türkiye, 26 - 27 Mayıs 2022, ss.110-117

Prediction of Earing Profile in Cup Drawing Test Using Hill48 Criterion

Akşen T. A., Şener B., Esener E., Fırat M.
10th International Automotive Technologies Congress (OTEKON2020), Bursa, Türkiye, 6 - 07 Eylül 2021, ss.1051-1057

Variation of Anisotropy with Plastic Strain and Its Effect on the Yield Surface Shape of Austenitic Stainless Steel

Şener B., Akşen T. A., Fırat M.
5th International Iron & Steel Symposium (UDCS'21), Karabük, Türkiye, 1 - 03 Nisan 2021, ss.37-39

Development of a 3-D Die Surface Compensation Method based on Part Springback Distribution

Esener E., Şener B., Fırat M.
5th International Iron&Steel Symposium (UDCS'21), Karabük, Türkiye, 1 - 03 Nisan 2021, ss.21-24

Edge Thinning Prediction of a Hole Under Stretching

Akşen T. A., Şener B., Esener E., Fırat M.
5th International Iron&Steel Symposium (UDCS'21), Karabük, Türkiye, 1 - 03 Nisan 2021, ss.33-36

Failure Prediction in Hole Expansion Test Using Plastic Work Criterion

Aksen T. A., Şener B., Esener E., Firat M.
2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2021, Ankara, Türkiye, 18 - 20 Ağustos 2021, cilt.35, ss.82-90 identifier

Modelling Anisotropic Behavior of AISI 304 Stainless Steel Sheet Using a Fourth-Order Polynomial Yield Function

Sener B., Kilicarslan E. S., Firat M.
23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, cilt.47, ss.1456-1461 identifier identifier

Failure Prediction Capability of Generalized Plastic Work Criterion

Aksen T. A., Sener B., Firat M.
23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, cilt.47, ss.1235-1240 identifier identifier

Earing Prediction of a Cup Drawing Process based on the Quadratic Hill Yield Function

Aksen T. A., Şener B., Esener E., Fırat M.
International Conference on Engineering Technology and Innovation, Belgrade, Sırbistan Ve Karadağ, 17 - 21 Nisan 2019, ss.30-38

Determining the Effect of Yield Criterias on Plasticity Modeling in Different Plastic Strain Levels

Şener B., Esener E., Fırat M.
9th International Automotive Technologies Congress (OTEKON 2018), Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.754-760

Investigation of Lubrication Effects in the Right Side of the Forming Limit Diagrams

Şener B., Kayali E. S.
International Conference of Computational Methods in Sciences and Engineering 2014 (ICCMSE), Athens, Yunanistan, 4 - 07 Nisan 2014, cilt.1618, ss.335-338 identifier identifier

Effectiveness of Stamping Lubricants in Erichsen Test

Şener B., Kayali E. S.
15th International Conference on Sheet Metal (SheMet 2013), Belfast, Birleşik Krallık, 25 - 27 Mart 2013, cilt.549, ss.325-327 identifier identifier

Derin Çekme Kalite Sacların Şekillendirme Sınır Diyagramlarının Belirlenmesi

Şener B., Gülmez T., Yurci M. E.
14th International Materials Symposium (IMSP'2012), Denizli, Türkiye, 10 - 12 Ekim 2012, ss.363-370

Kitap & Kitap Bölümleri

On the Use of Homogeneous Polynomial Yield Functions in Sheet Metal Forming Analysis

FIRAT M., ŞENER B., AKŞEN T. A., ESENER E.
Recent Advances in Polynomials, Kamal Shah, Editör, IntechOpen Book, London, ss.85-98, 2021

Diğer Yayınlar

2090 Alüminyum Alaşımının Kulaklanma Profilinin Ls-Dyna Kullanıcı Tanımlı Malzeme Modeli Kullanılarak Tahmini

Şener B., Esener E., Fırat M.
Sunum, ss.1-14, 2019

Otomotiv Sektöründe Kullanılan Derin Çekme Saclarının Şekillendirilebilirlik Analizi

Şener B.
Sunum, ss.1-36, 2011

Metrikler

Yayın

42

Atıf (WoS)

32

H-İndeks (WoS)

6

Atıf (Scopus)

101

H-İndeks (Scopus)

7

Atıf (Scholar)

117

H-İndeks (Scholar)

6

Atıf (TrDizin)

2

H-İndeks (TrDizin)

1

Proje

7

Açık Erişim

2