Publications & Works

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Innovative computational modal analysis of a marine propeller

Uslu S., BAYRAKTAR M., DEMİR C., BAYRAKTAR S.
APPLIED OCEAN RESEARCH, vol.113, 2021 (SCI-Expanded) identifier identifier

Two-dimensional simulations of vortex-induced vibration of a circular cylinder

Mutlu A. O., BAYRAKTAR M., BAYRAKTAR S.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M: JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, vol.235, no.3, pp.683-694, 2021 (SCI-Expanded) identifier identifier

Experimental and numerical investigation of clinched joint and implementation of the results to design of a tumble dryer

Bayraktar M., Cerkez V.
Journal Of The Brazilian Society Of Mechanical Sciences And Engineering, vol.42, pp.1-12, 2020 (SCI-Expanded) Creative Commons License

Modelling of main battle tank and designing LQR controller to decrease weapon oscillations Ana muharebe tankinin modellenmesi ve silah salinimlarinin azaltilmasi için LQR kontrolör tasarim

Cakir M. F., BAYRAKTAR M.
Journal of the Faculty of Engineering and Architecture of Gazi University, vol.35, no.4, pp.1861-1876, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Determination of critical section of wagon axle by considering dynamic and safety factors

Dikmen F., Bayraktar M., Güçlü R.
Alexandria Engineering Journal, vol.58, no.2, pp.611-624, 2019 (SCI-Expanded) identifier identifier

Manufacturing polymer/metal macro-composite structure for vibration damping

Altan M., Bayraktar M., Yavuz B.
International Journal of Advanced Manufacturing Technology, vol.86, pp.2119-2126, 2016 (SCI-Expanded) identifier identifier

A New Approach for Reliability Life Prediction of Rail Vehicle Axle by Considering Vibration Measurement

BAYRAKTAR M., GÜÇLÜ R., Tahrali N.
MATHEMATICAL PROBLEMS IN ENGINEERING, 2014 (SCI-Expanded) Creative Commons License identifier identifier

Dynamic analysis of rail vehicle axle

DİKMEN F., BAYRAKTAR M., GUCLU R.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, vol.38, no.2, pp.265-280, 2013 (SCI-Expanded) identifier identifier

Railway Axle Analyses: Fatigue Damage and Life Analysis of Rail Vehicle Axle

DİKMEN F., BAYRAKTAR M., GÜÇLÜ R.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, vol.58, no.9, pp.545-552, 2012 (SCI-Expanded) Creative Commons License identifier identifier

Reliability and fatigue life evaluation of railway axles

BAYRAKTAR M., Tahrali N., GÜÇLÜ R.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.24, no.3, pp.671-679, 2010 (SCI-Expanded) identifier identifier

Numerical investigation of a water flow in a rib-roughened channel by using Reynolds stress model

Bayraktar S., Bayraktar M., Vardar N.
INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS, vol.22, no.5, pp.331-339, 2008 (SCI-Expanded) identifier identifier

Articles Published in Other Journals

Rayli tasitlarda dinamik hareketler ve titresim azaltma yontemlerinin incelenmesi

Bayraktar M., Tahtali M.
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.26, no.1, pp.9-20, 2020 (ESCI) Creative Commons License

FREE VIBRATION ANALYSIS OF AN AIRCRAFT WING BY CONSIDERING AS A CANTILEVER BEAM

Demirtas A., Bayraktar M.
Selçuk Üniversitesi Mühendislik, Bilim ve Teknoloji Dergisi, vol.7, no.1, pp.12-21, 2019 (Peer-Reviewed Journal)

Frenli Tas Menteşe Kinematik, Kinetik ve Yorulma Analizi

Bayraktar M., Bilyaz H., Demir C.
SAKARYA UNIVERSITY JOURNAL OF SCIENCE, vol.22, no.2, pp.772-783, 2018 (Peer-Reviewed Journal)

Vibration Analysis of 19 Degrees of Freedom Rail Vehicle

Dikmen F., Bayraktar M., Güçlü R.
Scientific Research and Essays, vol.6, no.26, pp.5600-5608, 2011 (Peer-Reviewed Journal)

Zincir baklasında yük altında oluşan gerilmelerin sonlu elemanlar yöntemi ve fotoelastisite yöntemiyle incelenmesi

Azeloğlu C. O., Keskin Öner İ., Bayraktar M.
Makine Teknolojileri Elektronik Dergisi (elektronik), vol.2008, no.5, pp.41-48, 2008 (Peer-Reviewed Journal) Creative Commons License

Gemilerde korozyon analizi ve korozyonu etkileyen faktorler

Bayraktar S., Barut M.
Gemi ve Deniz Teknolojisi, vol.3, no.162, pp.1-4, 2004 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Design strategy for low-frequency absorbing acoustic metasurfaces

Baydur C., Bayraktar M., Wang X.
27. Yoğun Madde Fiziği Ankara Toplantısı, Ankara, Turkey, 16 December 2022, pp.60 Sustainable Development

Active Vibration Control of a Wheeled Armoured Vehicle with 𝐻∞ Controller Based on Linear Matrix Inequalities

Çakır M. F., Bayraktar M., Yazıcı H.
2nd Global Conference on Engineering Research - GLOBCER'22, Balıkesir, Turkey, 7 - 11 September 2022, pp.216-223 Creative Commons License

Steering Knuckle Design, Optimization and CAE Verification

Sen E., Bayraktar M.
II. International Conference on Innovative Engineering Applications (CIEA' 2021), Muş, Turkey, 20 - 22 May 2021, vol.1, no.1, pp.1-10

Aluminum suspension bracket fatigue life prediction for lightweight vehicles

Bayraktar M., Nalcacioglu V.
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 17 - 19 December 2019, pp.1-10

Dynamic Performance of a Hydraulic System Driven By a Variable Speed AC Electric Motor with Electro-Hydraulic Load Sensing

Kandeniz A., Bayraktar M., Akkaya A. V.
International Symposium For Environmental Science and Engineering Research (ISESER 2019), Konya, Turkey, 25 - 27 May 2019, pp.94-100

Designing, Implementation of Test Bench with PID Control for Variable Pitch Propeller system

Şanlıtürk M., Bayraktar M.
4. Uluslararası Mühendislik Mimarlik ve Tasarım Kongresi, İstanbul, Turkey, 23 April 2019, vol.1, no.1, pp.1-5

1-DOF 2D URANS Simulatiom of Vortex-Induced Vibration of a Cylinder with Different Damping Paremeters

Mutlu A. O., Bayraktar M., Bayraktar S.
4th International Congress on Engineering, Architecture and Design, İstanbul, Turkey, 23 - 24 April 2019, vol.1, no.1, pp.1-10

Modeling and Vibration Analyses of a High Speed Rail Vehicle

Tahtali M., BAYRAKTAR M.
4th International Conference on Advances in Mechanical Engineering (ICAME 2018), İstanbul, Turkey, 19 December 2018, vol.1, no.1, pp.1-10

CLINCHING STRENGTHS OF DIFFERENT SHEET METALS THAT CLINCHEDWITH SAME TOOLS AT SAME PRESS PARAMETERS

Cerkez V., Bayraktar M., Demir C.
1st International Symposium on Graduate Research in Science: Focus on Entrepreneurship and Innovation,, İstanbul, Turkey, 04 October 2018, vol.1, no.1, pp.1-5

Numerical and Experimental Modal Analysis of a Three Bladed Marine Propeller

Uslu S., Bayraktar M.
International Symposium on Naval Architecture and Maritime (INT-NAM), İstanbul, Turkey, 23 April 2018, vol.1, no.1, pp.1-10

Traffic Noise Pollution of Istanbul D-100 Highway

Ozkan B., BAYRAKTAR M.
Transist 2018 International Istanbul Transport Congress and Exhibition, İstanbul, Turkey, 01 December 2017, vol.1, no.1, pp.1-7

Bir raylı taşıtta farklı koşullar altında yolcu konforu analizi

AHAN A. O., ARISOY D. O., Müderrisoğlu K., BAYRAKTAR M., GÜÇLÜ R.
Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, İzmir, Turkey, 14 June 2015, pp.1-6

Raylı Taşıt Ve Karayolu Taşıtı Trafiği Etkisi Altındaki Bir Asma Köprünün Dinamik Analizi

Müderrisoğlu K., Arısoy D. O., Ahan A. O., Bayraktar M., Güçlü R.
Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, İzmir, Turkey, 14 - 17 June 2015, pp.1-11

Roller Coaster Güzergahında Tanımlanan Noktasal Bir Cismin Dinamik Analizi

AHAN A. O., ARISOY D. O., Müderrisoğlu K., BAYRAKTAR M.
XVI. Ulusal Makina Teorisi Sempozyumu, Erzurum, Turkey, 12 September 2013, pp.1-7

Static and Dynamic Analysis of Railway Wagon Trailer Bogie in Computer Environment

ARISOY D. O., AHAN A. O., Müderrisoğlu K., BAYRAKTAR M.
1. International Workshop on Railway System Engineering, Karabük, Turkey, 11 October 2012, pp.1-7

Raylı Taşıt Dingillerinin Dinamik Analizi

BAYRAKTAR M.
Fikirler Pazarı Etkinliği,YTÜ Otağ-ı Hümayun, S.87, İstanbul, TÜRKİYE, 01 May 2011

Stress Analysis, Life and Reliability Evaluation for the Eccentric Press Shaft

BAYRAKTAR M.
1st. International Scientific Conference on Engineering Mnufacturing and Advanced Technologies (MAT 2010), Mostar, BOSNA and HERZEGOVİNA, 01 November 2010

Modelling of Air Springs in a Rail Vehicle

Bayraktar M., Güçlü R., Metin M.
13th International Research/Expert Conference, Trends in the Development of Machinery and Associated Technology, TMT 2009, Nabeul, Tunisia, 16 - 21 October 2009, pp.829-832 Creative Commons License

Vibration of Rail Vehicles and Modelling of System by using Matlab

Bayraktar M., Güçlü R.
VIBRATION OF RAIL VEHICLES AND MODELLING OF SYSTEM BY USING MATLAB , Nabeul, Tunisia, 16 - 21 October 2009, pp.825-829 Creative Commons License

THE HIGHLIGHT OF GROWING LIGHT RAIL TRANSIT

Bayraktar M., Güçlü R.
13th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” , Nabeul, Tunisia, 16 - 21 October 2009, pp.821-824 Creative Commons License

Aks modellemesiyle hafif raylı taşıtın titreşimlerinin incelenmesi

Bayraktar M., Güçlü R., Metin M., Yazıcı H.
14. Ulusal Makina Teorisi Sempozyumu UMTS 2009, ODTÜ Kuzey Kıbrıs Kampüsü, Güzelyurt, Cyprus (Kktc), 2 - 04 July 2009, pp.233-240

Design of Rail Vehicle Axle Related to Failure and Life

BAYRAKTAR M.
5.Uluslararasi Ileri Teknolojiler Sempozyumu (IATS 2009), Karabük, TÜRKİYE, 01 May 2009

Statical and Modal Analyses of Axle in a Light Rail

BAYRAKTAR M.
International Journal of Arts&Sciences Conference (IJAS), Freiburg, GERMANY, 01 December 2008

Systematic Design: Analysis of Natural Systems and Synectics Approach

Bayraktar M., Bayraktar S.
European Conference for Academic Disciplines organized by Proceedings of the International Journal of Arts & Sciences Conference, 01-04 December 2008, Freiburg, Germany, 1 - 04 December 2008, vol.1, no.1, pp.1-8

Investigation of the Effects of Turbulence on a 2-D Rib Roughened Channel

Bayraktar M., Bayraktar S., Yılmaz T.
11th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, (TMT 2007), Tunis, Tunisia, 5 - 09 September 2007, vol.1, no.1, pp.1-4

Elastohydrodymanic Lubricant Film Forming of Different Bearings

BAYRAKTAR M.
11th International Conference Research/Expert Conference Trends in the Development of Machinery and Associated Technologies (TMT 2007), Hammamet, TUNUSIA, 01 September 2007

Hyperelastic Material Model of Rubber and Rubber-Like Materials

BAYRAKTAR M.
11th International Conference Research/Expert Conference Trends in the Development of Machinery and Associated Technologies (TMT 2007), 01 September 2007

Investigation of the Effects of Turbulence on a 2-D Rib Roughened Pipe

BAYRAKTAR S.
11th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technologies (TMT 2007), 05-09 September, 2007, Hammamet, TUNISIA., 01 September 2007

The Expectation of the Society from a Mechanical Engineer and the Efficiency of the Education

BAYRAKTAR M.
SEFI 34th Annual Conference on Engineering Education and Active Students, Uppsala, SWEDEN, 01 June 2006

The Importance of Training at Mechanical Engineering Education in YTU (Turkiye) and in the World

BAYRAKTAR M.
SEFI 34th Annual Conference on Engineering Education and Active Students, Uppsala, SWEDEN, 01 June 2006

A Comparison Between Yildiz Technical University Mechanical Engineering Department and Other Well-Known Universities of Turkey and World for Option and Course Variety

BAYRAKTAR M.
SEFI 33th Annual Conference on Engineering Education at the Cross-Roads of Civilization, Ankara, TÜRKİYE, 01 June 2006

Dişli Çarkların Sonlu Elemanlar Yöntemi ile Modellenmesi ve Analizi

BAYRAKTAR M.
3. Makina Tasarım ve İmalat Teknolojileri Kongresi (MATIT 2005), Konya, TÜRKİYE, 01 September 2005

Otombil Dış Karoseri Elemanlarından Dikiz Aynasının Aerodinamik Özelliklerinin ANSYS Yazılımı ile Analizi

BAYRAKTAR M.
4th International Advanced Technologies Symposium (IATS 2005), Konya, TÜRKİYE, 01 September 2005

Makaralı Oynak Rulmanlarda Elastohidrodinamik Yağ Filmi Oluşumu

BAYRAKTAR M.
3. Makina Tasarim ve İmalat Teknolojileri Kongresi (MATIT 2005), Konya, TÜRKİYE, 01 September 2005

Tribodizayn: Makina Tasarımının Temel Bir Dalı

BAYRAKTAR M.
5. Ulusal Makina Mühendisliği ve Eğitim Sempozyumu, İstanbul, TÜRKİYE, 01 November 2003

Other Publications

Raylı Taşıt Bojisinde ve Aksında Titreşim Ölçümleri

GÜÇLÜ R., BAYRAKTAR M., TAHRALI N.
Technical Report, pp.1-10, 2010

Raylı Taşıt Aks Millerinin Kırılmalarının Değerlendirilmesi ve Wöhler Diyagramlarına Göre Ömür Hesapları

GÜÇLÜ R., BAYRAKTAR M., TAHRALI N.
Technical Report, pp.1-10, 2010

Raylı Taşıt Aks Millerinin Doğal Frekans Değerlerinin Modal Analiz Yöntemi (Deneysel ve Sonlu Eleman Programı NASTRAN) ile Belirlenmesi

GÜÇLÜ R., BAYRAKTAR M., TAHRALI N.
Technical Report, pp.1-10, 2010

İstatistiki Değerlendirme ve Kırılan Dingiller Esas Alınarak Elde Edilen Diyagramlar

BAYRAKTAR M.
Other, 2008