Doç. Dr. Mehmet Erdi KORKMAZ

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , cilt.238, sa.6, ss.2854-2866, 2024 (SCI-Expanded, Scopus)

13. Investigating the erosive wear characteristics of AISI 420 martensitic stainless steel after surface hardening by boriding

Çakır O., Demirsöz R., Özdemir M. T., Korkmaz M. E., Gupta M. K., Günay M., et al.

Journal of Materials Research and Technology , cilt.33, ss.2292-2302, 2024 (SCI-Expanded)

14. A review on microstructure, mechanical behavior and post processing of additively manufactured Ni-based superalloys

Kuntoğlu M., Salur E., Gupta M. K., Waqar S., Szczotkarz N., Vashishtha G., et al.

Rapid Prototyping Journal , cilt.30, sa.9, ss.1890-1910, 2024 (SCI-Expanded, Scopus)

15. Determination and Verification of the Johnson–Cook Constitutive Model Parameters in the Precision Machining of Ti6Al4V Alloy

Löschner P., Gupta M. K., Niesłony P., Korkmaz M. E., Jamil M.

Machines , cilt.12, sa.10, 2024 (SCI-Expanded)

16. Tribology-driven strategies for tool wear reduction and surface integrity enhancement in cryogenic CO2-cooled milling of laser metal deposited Ti64 alloy

Ross N. S., Mashinini P. M., Ananth M. B. J., Srinivasan N., Gupta M. K., Korkmaz M. E.

Tribology International , cilt.198, 2024 (SCI-Expanded)

17. Configuration of tool wear and its mechanism in sustainable machining of titanium alloys with energy signals

Vashishtha G., Chauhan S., Gupta M. K., Korkmaz M. E., Ross N. S., Zimroz R., et al.

International Journal of Advanced Manufacturing Technology , cilt.134, sa.7-8, ss.3561-3573, 2024 (SCI-Expanded)

18. Investigation of Tribological Properties of Inconel 601 under Environmentally Friendly MQL and Nano-Fluid MQL with Pack Boronizing

Uslu G., Korkmaz M. E., Elkilani R. H. R., Gupta M. K., Vashishtha G.

Lubricants , cilt.12, sa.10, 2024 (SCI-Expanded)

19. A Short Review on Minimum Quantity Lubrication Method in Machining Applications

Özdemir M. T., Korkmaz M. E.

Prabha Materials Science Letters , cilt.3, sa.2, ss.191-203, 2024 (Scopus)

20. Nano lubricants in machining and tribology applications: A state of the art review on challenges and future trend

Erdi Korkmaz M. E., Kumar Gupta M.

Journal of Molecular Liquids , cilt.407, 2024 (SCI-Expanded, Scopus)

21. Analytical Modeling Methods in Machining: A State of the Art on Application, Recent Challenges, and Future Trends

Korkmaz M. E., Gupta M. K., Sarikaya M., Günay M., Boy M., Yaşar N., et al.

Arabian Journal for Science and Engineering , cilt.49, sa.8, ss.10287-10326, 2024 (SCI-Expanded, Scopus)

22. A study on friction induced tribological characteristics of steel 316 L against 100 cr6 alloy under different lubricating conditions with machine learning model

Gupta M. K., Korkmaz M. E., Karolczuk A., Ross N. S., Vashishtha G., Królczyk J. B., et al.

Tribology International , cilt.195, 2024 (SCI-Expanded)

23. Studies on energy consumption and other important machining characteristics in sustainable turning of EA1N railway axle steel

Dinçsoy M., Korkmaz M. E., Gupta M. K., Özdemir M. T., Günay M., Demirsöz R.

International Journal of Advanced Manufacturing Technology , cilt.133, sa.5-6, ss.2303-2317, 2024 (SCI-Expanded)

24. A sustainable cooling/lubrication method focusing on energy consumption and other machining characteristics in high-speed turning of aluminum alloy

Korkmaz M. E., Gupta M. K., Çelik E., Ross N. S., Günay M.

Sustainable Materials and Technologies , cilt.40, 2024 (SCI-Expanded, Scopus)

25. Enhancing surface quality and tool life in SLM-machined components with Dual-MQL approach

Ross N. S., Mashinini P. M., Mishra P., Ananth M. B. J., Mustafa S. M., Gupta M. K., et al.

Journal of Materials Research and Technology , cilt.31, ss.1837-1852, 2024 (SCI-Expanded, Scopus)

26. Prediction of power consumption and its signals in sustainable turning of PH13-8Mo steel with different machine learning models

YURTKURAN H., Korkmaz M. E., Gupta M. K., Yılmaz H., Günay M., Vashishtha G.

International Journal of Advanced Manufacturing Technology , cilt.133, sa.5-6, ss.2171-2188, 2024 (SCI-Expanded)

27. A new intelligent approach of surface roughness measurement in sustainable machining of AM-316L stainless steel with deep learning models

Ross N. S., Mashinini P. M., Sherin Shibi C., Kumar Gupta M., Erdi Korkmaz M. E., Krolczyk G. M., et al.

Measurement: Journal of the International Measurement Confederation , cilt.230, 2024 (SCI-Expanded)

28. A State of the Art on Cryogenic Cooling and Its Applications in the Machining of Difficult-to-Machine Alloys

Korkmaz M. E., Gupta M. K.

Materials , cilt.17, sa.9, 2024 (SCI-Expanded)

29. Studies on newly developed hBN/graphene-based nano-fluids supported by cryogenic cooling conditions in improving the tribological performance of Ti6Al4V alloy

Korkmaz M. E., Rai R., Demirsöz R., Picak S., Vashishtha G., Günay M.

Journal of Molecular Liquids , cilt.400, 2024 (SCI-Expanded, Scopus)

30. Understanding the Relationship between Surface Quality and Chip Morphology under Sustainable Cutting Environments

Günay M., Korkmaz M. E.

Materials , cilt.17, sa.8, 2024 (SCI-Expanded)

31. Tool wear and its mechanism in turning aluminum alloys with image processing and machine learning methods

Korkmaz M. E., Gupta M. K., Çelik E., Ross N. S., Günay M.

Tribology International , cilt.191, 2024 (SCI-Expanded)

32. Towards sustainability assessment, energy consumption, and carbon emissions in cryogenic drilling of Alloy 20: a new approach towards sustainable future and challenges

Sivalingam V., Liu H., Selvam B., Kai G., Kumar P. G., Gupta M. K., et al.

International Journal of Advanced Manufacturing Technology , cilt.131, sa.3-4, ss.1151-1165, 2024 (SCI-Expanded, Scopus)

33. Parallel structure of crayfish optimization with arithmetic optimization for classifying the friction behaviour of Ti-6Al-4V alloy for complex machinery applications

Chauhan S., Vashishtha G., Gupta M. K., Korkmaz M. E., Demirsöz R., Noman K., et al.

Knowledge-Based Systems , cilt.286, 2024 (SCI-Expanded, Scopus)

34. A novel approach of tool condition monitoring in sustainable machining of Ni alloy with transfer learning models

Ross N. S., Sheeba P. T., Shibi C. S., Gupta M. K., Korkmaz M. E., Sharma V. S.

Journal of Intelligent Manufacturing , cilt.35, sa.2, ss.757-775, 2024 (SCI-Expanded, Scopus)

35. Modeling, deposition, and mechanical characterizations of single-step surface coating using high-speed grinding

Singh A., Dhami H. S., Sinha M. K., Sharma R. K., Gupta M. K., Korkmaz M. E., et al.

International Journal of Advanced Manufacturing Technology , 2024 (SCI-Expanded)

36. Real-time monitoring and measurement of energy characteristics in sustainable machining of titanium alloys

Gupta M. K., Korkmaz M. E., Yılmaz H., Şirin Ş., Ross N. S., Jamil M., et al.

Measurement: Journal of the International Measurement Confederation , cilt.224, 2024 (SCI-Expanded)

37. Prediction and classification of tool wear and its state in sustainable machining of Bohler steel with different machine learning models

Korkmaz M. E., Gupta M. K., Kuntoğlu M., Patange A. D., Ross N. S., Yılmaz H., et al.

Measurement: Journal of the International Measurement Confederation , cilt.223, 2023 (SCI-Expanded)

38. Understanding the machining characteristics of Al6082 hybrid metal matrix composites milled under cryogenic cooling conditions

Sivalingam V., Zhou Q., Manickajothi G., Ross N. S., Sun J., Gupta M. K., et al.

International Journal of Advanced Manufacturing Technology , cilt.129, sa.7-8, ss.3387-3402, 2023 (SCI-Expanded)

39. A new approach of measurement and analysis of PVD - TiAlN coated carbide tools in machining of Monel 400 alloy under hybrid cooling conditions

Ross N. S., Gopinath C., Sivaraman V., Ananth M. B. J., Gupta M. K., Erdi Korkmaz M. E., et al.

Measurement: Journal of the International Measurement Confederation , cilt.221, 2023 (SCI-Expanded)

40. Towards specific cutting energy analysis in the machining of Inconel 601 alloy under sustainable cooling conditions

Korkmaz M. E., Gupta M. K., Yilmaz H., Ross N. S., Boy M., Sivalingam V. K., et al.

Journal of Materials Research and Technology , cilt.27, ss.4074-4087, 2023 (SCI-Expanded)

41. Novel use of cryogenic cooling conditions in improving the machining performance of Al 8011/nano-SiC composites

Ross N. S., Manasea Selvin B. J. A., Nagarajan S., Mashinini P. M., Dharmalingam S. K., Savio A. P., et al.

International Journal of Advanced Manufacturing Technology , cilt.129, sa.3-4, ss.1703-1715, 2023 (SCI-Expanded, Scopus)

42. Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies

Gupta M. K., Niesłony P., Korkmaz M. E., Kuntoğlu M., Królczyk G., Günay M., et al.

International Journal of Precision Engineering and Manufacturing - Green Technology , cilt.10, sa.6, ss.1393-1406, 2023 (SCI-Expanded, Scopus)

43. Comprehensive analysis of tool wear, surface roughness and chip morphology in sustainable turning of Inconel-601 alloy

Korkmaz M. E., Gupta M. K., Günay M., Boy M., Yaşar N., Demirsöz R., et al.

Journal of Manufacturing Processes , cilt.103, ss.156-167, 2023 (SCI-Expanded, Scopus)

44. Abrasive Wear Behavior of Nano-Sized Steel Scale on Soft CuZn35Ni2 Material

Demirsoz R., Uğur A., Erdoğdu A. E., Korkmaz M. E., Gupta M. K.

Journal of Materials Engineering and Performance , cilt.32, sa.19, ss.8858-8869, 2023 (SCI-Expanded)

45. Tribological characteristics of additively manufactured 316 stainless steel against 100 cr6 alloy using deep learning

Gupta M. K., Korkmaz M. E., Shibi C. S., Ross N. S., Singh G., Demirsöz R., et al.

Tribology International , cilt.188, 2023 (SCI-Expanded)

46. Carbon emissions and overall sustainability assessment in eco-friendly machining of Monel-400 alloy

Ross N. S., Rai R., Ananth M., Srinivasan D., Ganesh M., Gupta M. K., et al.

Sustainable Materials and Technologies , cilt.37, 2023 (SCI-Expanded, Scopus)

47. Machine learning models for online detection of wear and friction behaviour of biomedical graded stainless steel 316L under lubricating conditions

Korkmaz M. E., Gupta M. K., Singh G., Kuntoğlu M., Patange A., Demirsoz R., et al.

International Journal of Advanced Manufacturing Technology , cilt.128, sa.5-6, ss.2671-2688, 2023 (SCI-Expanded, Scopus)

48. A conceptual framework for sustainability impact assessment in machining bohler tool steel under hBN-enriched nano cutting fluids environment

Gupta M. K., Korkmaz M. E.

Sustainable Materials and Technologies , cilt.37, 2023 (SCI-Expanded, Scopus)

49. Application of Image Processing in Different Machining Processes: A Short and Technical Review

Uslu G., Özdemir M. T., Demirsöz R., Günay M., Korkmaz M. E.

Prabha Materials Science Letters , cilt.2, sa.2, ss.62-74, 2023 (Scopus)

50. Wear performance of Ti-6Al-4 V titanium alloy through nano-doped lubricants

Etri H. E. L., Singla A. K., Özdemir M. T., Korkmaz M. E., Demirsöz R., Gupta M. K., et al.

Archives of Civil and Mechanical Engineering , cilt.23, sa.3, 2023 (SCI-Expanded, Scopus)

51. Development and potential use of MWCNT suspended in vegetable oil as a cutting fluid in machining of Monel 400

Ross N. S., Ganesh M., Ananth M. B. J., Kumar M., Rai R., Gupta M. K., et al.

Journal of Molecular Liquids , cilt.382, 2023 (SCI-Expanded)

52. A mathematical approach of evaluating sustainability indicators in milling of aluminium hybrid composite by different eco-friendly cooling strategies

Sivalingam V., Zhou Q., Selvam B., Sun J., Pandiyan K., Gupta M., et al.

Sustainable Materials and Technologies , cilt.36, 2023 (SCI-Expanded, Scopus)

53. Studies on Geometrical Features of Tool Wear and Other Important Machining Characteristics in Sustainable Turning of Aluminium Alloys

Gupta M. K., Niesłony P., Sarikaya M., Korkmaz M. E., Kuntoğlu M., Królczyk G.

International Journal of Precision Engineering and Manufacturing - Green Technology , cilt.10, sa.4, ss.943-957, 2023 (SCI-Expanded, Scopus)

54. Implementation of green cooling/lubrication strategies in metal cutting industries: A state of the art towards sustainable future and challenges

Korkmaz M. E., Gupta M., Ross N. S., Sivalingam V.

Sustainable Materials and Technologies , cilt.36, 2023 (SCI-Expanded, Scopus)

55. Measuring Surface Characteristics in Sustainable Machining of Titanium Alloys Using Deep Learning-Based Image Processing

Ross N. S., Shibi C. S., Mustafa S. M., Gupta M. K., Korkmaz M. E., Sharma V. S., et al.

IEEE Sensors Journal , cilt.23, sa.12, ss.13629-13639, 2023 (SCI-Expanded)

56. Potential use of cryogenic cooling for improving the tribological and tool wear characteristics while machining aluminum alloys

Gupta M., Niesłony P., Korkmaz M. E., Królczyk G., Kuntoğlu M., Pawlus P., et al.

Tribology International , cilt.183, 2023 (SCI-Expanded, Scopus)

57. A Short Technical Review on Digital Twins in Smart Manufacturing

KORKMAZ M. E.

Sustainable Production, Instrumentation and Engineering Sciences , cilt.1, sa.1, 2023 (Hakemli Dergi)

58. Wear and Friction Mechanism of Stainless Steel 420 Under Various Lubrication Conditions: A Tribological Assessment With Ball on Flat Test

Gupta M. K., Demirsoz R., Korkmaz M. E., Ross N. S.

Journal of Tribology , cilt.145, sa.4, 2023 (SCI-Expanded, Scopus)

59. A Short and Technical Review on Lattice Structures Produced by Additive Manufacturing

Özdemir M. T., Korkmaz M. E.

Prabha Materials Science Letters , cilt.2, sa.1, ss.48-61, 2023 (Scopus)

60. A State of the Art on Simulation and Modelling Methods in Machining: Future Prospects and Challenges

Korkmaz M. E., Gupta M. K.

Archives of Computational Methods in Engineering , cilt.30, sa.1, ss.161-189, 2023 (SCI-Expanded)

61. Role of sustainable cooling/lubrication conditions in improving the tribological and machining characteristics of Monel-400 alloy

Ross N. S., Ganesh M., Srinivasan D., Gupta M. K., Korkmaz M. E., Krolczyk J.

Tribology International , cilt.176, 2022 (SCI-Expanded)

62. A state-of-the-art review on mechanical characteristics of different fiber metal laminates for aerospace and structural applications

Etri H. E., Korkmaz M. E., Gupta M. K., Gunay M., Xu J.

International Journal of Advanced Manufacturing Technology , cilt.123, sa.9-10, ss.2965-2991, 2022 (SCI-Expanded, Scopus)

63. Understanding the machining induced tribological mechanism of Hastelloy-X under sustainable cooling/lubrication conditions

Zhou Q., Sivalingam V., Sun J., Murugasen P. K., Gupta M. K., Korkmaz M. E.

International Journal of Advanced Manufacturing Technology , cilt.123, sa.3-4, ss.973-983, 2022 (SCI-Expanded)

64. Key initiatives to improve the machining characteristics of Inconel-718 alloy: Experimental analysis and optimization

Rubaiee S., Danish M., Gupta M. K., Ahmed A., Yahya S. M., Yildirim M. B., et al.

Journal of Materials Research and Technology , cilt.21, ss.2704-2720, 2022 (SCI-Expanded)

65. A comprehensive review on the grinding process: Advancements, applications and challenges

Kishore K., Sinha M. K., Singh A., Archana A., Gupta M. K., Korkmaz M. E.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.236, sa.22, ss.10923-10952, 2022 (SCI-Expanded, Scopus)

66. On tribological characteristics of TiC rollers machined under hybrid lubrication/cooling conditions

Korkmaz M. E., Gupta M. K., Demirsöz R., Boy M., Yaşar N., Günay M., et al.

Tribology International , cilt.174, 2022 (SCI-Expanded)

67. Tool wear patterns and their promoting mechanisms in hybrid cooling assisted machining of titanium Ti-3Al-2.5V/grade 9 alloy

Gupta M. K., Niesłony P., Sarikaya M., Korkmaz M. E., Kuntoğlu M., Królczyk G., et al.

Tribology International , cilt.174, 2022 (SCI-Expanded)

68. Advance monitoring of hole machining operations via intelligent measurement systems: A critical review and future trends

Rüstem B., Mustafa K., Danil Yu P., Üsame A. U., Munish Kumar G., Mehmet Erdi K.

Measurement: Journal of the International Measurement Confederation , cilt.201, 2022 (SCI-Expanded)

69. Development of lattice structure with selective laser melting process: A state of the art on properties, future trends and challenges

Korkmaz M. E., Gupta M. K., Robak G., Moj K., Krolczyk G. M., Kuntoğlu M.

Journal of Manufacturing Processes , cilt.81, ss.1040-1063, 2022 (SCI-Expanded, Scopus)

70. Understanding the lubrication regime phenomenon and its influence on tribological characteristics of additively manufactured 316 Steel under novel lubrication environment

Korkmaz M. E., Gupta M. K., Demirsöz R.

Tribology International , cilt.173, 2022 (SCI-Expanded, Scopus)

71. A novel use of hybrid Cryo-MQL system in improving the tribological characteristics of additively manufactured 316 stainless steel against 100 Cr6 alloy

Demirsöz R., Korkmaz M. E., Gupta M. K.

Tribology International , cilt.173, 2022 (SCI-Expanded)

72. Thermo-physical, tribological and machining characteristics of Hastelloy C276 under sustainable cooling/lubrication conditions

Ross N. S., Srinivasan N., Amutha P., Gupta M. K., Korkmaz M. E.

Journal of Manufacturing Processes , cilt.80, ss.397-413, 2022 (SCI-Expanded)

73. Indirect monitoring of machining characteristics via advanced sensor systems: a critical review

Korkmaz M. E., Gupta M. K., Li Z., Krolczyk G. M., Kuntoğlu M., Binali R., et al.

International Journal of Advanced Manufacturing Technology , cilt.120, sa.11-12, ss.7043-7078, 2022 (SCI-Expanded, Scopus)

74. Erosion characteristics on surface texture of additively manufactured AlSi10Mg alloy in SiO2 quartz added slurry environment

Demirsöz R., Korkmaz M. E., Gupta M. K., Collado A. G., Krolczyk G. M.

Rapid Prototyping Journal , cilt.28, sa.5, ss.916-932, 2022 (SCI-Expanded)

75. Investigations on surface induced tribological characteristics in MQCL assisted machining of duplex stainless steel

Krolczyk J., Maruda R., Krolczyk G., Wojciechowski S., Gupta M. K., Korkmaz M. E.

Journal of Materials Research and Technology , cilt.18, ss.2754-2769, 2022 (SCI-Expanded)

76. Tribological and surface morphological characteristics of titanium alloys: a review

Gupta M. K., Etri H. E., Korkmaz M. E., Ross N. S., Krolczyk G. M., Gawlik J., et al.

Archives of Civil and Mechanical Engineering , cilt.22, sa.2, 2022 (SCI-Expanded, Scopus)

77. A technical overview of metallic parts in hybrid additive manufacturing industry

Korkmaz M. E., Waqar S., Garcia-Collado A., Gupta M. K., Krolczyk G. M.

Journal of Materials Research and Technology , cilt.18, ss.384-395, 2022 (SCI-Expanded, Scopus)

78. In-process detection of cutting forces and cutting temperature signals in cryogenic assisted turning of titanium alloys: An analytical approach and experimental study

Kumar Gupta M., Korkmaz M. E., Sarıkaya M., Krolczyk G. M., Günay M.

Mechanical Systems and Signal Processing , cilt.169, 2022 (SCI-Expanded, Scopus)

79. Influence of Glass Fiber Ratio on Machining Characteristics of PA66 Polymer for Aerospace Applications

Uslu G., Demirhan M., YAŞAR N., KORKMAZ M. E.

İmalat Teknolojileri ve Uygulamaları , cilt.3, sa.1, ss.59-66, 2022 (Hakemli Dergi)

80. A Review on Machinability of Shape Memory Alloys Through Traditional and Non-Traditional Machining Processes: A Review

SAOUD F. B., KORKMAZ M. E.

Manufacturing Technologies and Applications , cilt.3, sa.1, ss.14-32, 2022 (Hakemli Dergi)

81. Evaluation of the Mechanical Properties and Drilling of Glass Bead/Fiber-Reinforced Polyamide 66 (PA66)-Based Hybrid Polymer Composites

Demirsöz R., Yaşar N., Korkmaz M. E., Günay M., Giasin K., Pimenov D. Y., et al.

Materials , cilt.15, sa.8, 2022 (SCI-Expanded, Scopus)

82. Performance of MQL and Nano-MQL Lubrication in Machining ER7 Steel for Train Wheel Applications

Çamlı K. Y., Demirsöz R., Boy M., Korkmaz M. E., Yaşar N., Giasin K., et al.

Lubricants , cilt.10, sa.4, 2022 (SCI-Expanded)

83. Hot Deformation Behavior and Strain Rate Sensitivity of 33MnCrB5 Boron Steel Using Material Constitutive Equations

Teker E., Danish M., Gupta M. K., Kuntoğlu M., Korkmaz M. E.

Transactions of the Indian Institute of Metals , cilt.75, sa.3, ss.717-726, 2022 (SCI-Expanded)

84. Cutting forces and temperature measurements in cryogenic assisted turning of AA2024-T351 alloy: An experimentally validated simulation approach

Gupta M. K., Korkmaz M. E., Sarıkaya M., Krolczyk G. M., Günay M., Wojciechowski S.

Measurement: Journal of the International Measurement Confederation , cilt.188, 2022 (SCI-Expanded, Scopus)

85. Application of Bumpers in Different Types of Railway Vehicles: A Short Review

El Etri H., Korkmaz M. E., Gupta M. K.

Applied Science and Engineering Progress , cilt.15, sa.2, 2022 (Scopus)

86. A short review on thermal treatments of Titanium & Nickel based alloys processed by selective laser melting

Korkmaz M. E., Gupta M. K., Waqar S., Kuntoğlu M., Krolczyk G. M., Maruda R. W., et al.

Journal of Materials Research and Technology , cilt.16, ss.1090-1101, 2022 (SCI-Expanded, Scopus)

87. Measurement and analysis of machining induced tribological characteristics in dual jet minimum quantity lubrication assisted turning of duplex stainless steel

Kumar Gupta M., Boy M., Erdi Korkmaz M. E., Yaşar N., Günay M., Krolczyk G. M.

Measurement: Journal of the International Measurement Confederation , cilt.187, 2022 (SCI-Expanded, Scopus)

88. Impact of hybrid cooling approach on milling and surface morphological characteristics of Nimonic 80A alloy

Ross N. S., Gopinath C., Nagarajan S., Gupta M. K., Shanmugam R., Kumar M. S., et al.

Journal of Manufacturing Processes , cilt.73, ss.428-439, 2022 (SCI-Expanded, Scopus)

89. Numerical and experimental investigations of built orientation dependent Johnson–Cook model for selective laser melting manufactured AlSi10Mg

Aktürk M., Boy M., Gupta M. K., Waqar S., Krolczyk G. M., Korkmaz M. E.

Journal of Materials Research and Technology , cilt.15, ss.6244-6259, 2021 (SCI-Expanded)

90. A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials

Yaşar N., Korkmaz M. E., Gupta M. K., Boy M., Günay M.

International Journal of Advanced Manufacturing Technology , cilt.117, sa.1-2, ss.653-673, 2021 (SCI-Expanded, Scopus)

91. Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718

Danish M., Gupta M. K., Rubaiee S., Ahmed A., Korkmaz M. E.

Tribology International , cilt.163, 2021 (SCI-Expanded, Scopus)

92. Influence of duplex jets MQL and nano-MQL cooling system on machining performance of Nimonic 80A

Korkmaz M. E., Gupta M. K., Boy M., Yaşar N., Krolczyk G. M., Günay M.

Journal of Manufacturing Processes , cilt.69, ss.112-124, 2021 (SCI-Expanded, Scopus)

93. Low-temperature aluminizing influence on degradation of nimonic 80A surface: Microstructure, wear and high temperature oxidation behaviors

Erdogan A., Yener T., Döleker K. M., Korkmaz M. E., Gök M. S.

Surfaces and Interfaces , cilt.25, 2021 (SCI-Expanded, Scopus)

94. Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method

Erden M. A., Yaşar N., Korkmaz M. E., Ayvacı B., Nimel Sworna Ross K., Mia M.

International Journal of Advanced Manufacturing Technology , cilt.114, sa.9-10, ss.2811-2827, 2021 (SCI-Expanded, Scopus)

95. Eklemeli İmalat Yöntemi ile Üretilmiş Alüminyum Alaşımlarının Malzeme Yapısal Parametrelerinin Belirlenmesi Üzerine Bir Derleme

Aktürk M., KORKMAZ M. E.

İmalat Teknolojileri ve Uygulamaları , cilt.2, sa.1, ss.49-60, 2021 (Hakemli Dergi)

96. Tool wear and surface evaluation in drilling fly ash geopolymer using HSS, HSS-Co, and HSS-TiN cutting tools

Ghazali M. F., Abdullah M. M. A. B., Rahim S. Z. A., Gondro J., Pietrusiewicz P., Garus S., et al.

Materials , cilt.14, sa.7, 2021 (SCI-Expanded)

97. Characteristics, high temperature wear and oxidation behavior of boride layer grown on nimonic 80A Ni-based superalloy

Günen A., Döleker K. M., Korkmaz M. E., Gök M. S., Erdogan A.

Surface and Coatings Technology , cilt.409, 2021 (SCI-Expanded)

98. FEM modelling of turning of AA6061-T6: Investigation of chip morphology, chip thickness and shear angle

KORKMAZ M. E., YAŞAR N.

Journal of Production Systems and Manufacturing Science , cilt.2, sa.1, ss.50-58, 2021 (Hakemli Dergi)

99. Investigation of surface modification and tool wear on milling Nimonic 80A under hybrid lubrication

K N. S. R., G M., Anwar S., Rahman M. A., Erdi Korkmaz M. E., Gupta M. K., et al.

Tribology International , cilt.155, 2021 (SCI-Expanded, Scopus)

100. Investigation on mechanical, tribological and microstructural properties of Al-Mg-Si-T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications

Sharma S., Singh J., Gupta M. K., Mia M., Dwivedi S. P., Saxena A., et al.

Journal of Materials Research and Technology , cilt.12, ss.1564-1581, 2021 (SCI-Expanded, Scopus)

101. Nimonic 80A Alaşımının Johnson-Cook Model Parametrelerinin Sonlu Elemanlar Yöntemiyle Doğrulanması

KORKMAZ M. E., GÜNAY M.

Politeknik Dergisi , cilt.23, sa.3, ss.625-632, 2020 (ESCI)

102. Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cutting environments

Günay M., Korkmaz M. E., Yaşar N.

Journal of Manufacturing Processes , cilt.56, ss.678-687, 2020 (SCI-Expanded, Scopus)

103. Numerical and experimental investigation of cutting forces in turning of Nimonic 80A superalloy

Korkmaz M. E., Yaşar N., Günay M.

Engineering Science and Technology, an International Journal , cilt.23, sa.3, ss.664-673, 2020 (SCI-Expanded)

104. An investigation on braking systems used in railway vehicles

Günay M., Korkmaz M. E., Özmen R.

Engineering Science and Technology, an International Journal , cilt.23, sa.2, ss.421-431, 2020 (SCI-Expanded, Scopus)

105. Verification of Johnson-Cook parameters of ferritic stainless steel by drilling process: Experimental and finite element simulations

Korkmaz M. E.

Journal of Materials Research and Technology , cilt.9, sa.3, ss.6322-6330, 2020 (SCI-Expanded)

106. Determination and Verification of Johnson–Cook Parameters for 430 Ferritic Steels via Different Gage Lengths

Korkmaz M. E.

Transactions of the Indian Institute of Metals , cilt.72, sa.10, ss.2663-2672, 2019 (SCI-Expanded)

107. Optimization of Cutting Parameters in Hard Turning of AISI H10A Steel under Minimum Quantity Lubrication

GÜNAY M., DEMİR H., KORKMAZ M. E., ÇAKIROĞLU R.

European Journal of Engineering and Natural Sciences , cilt.3, sa.2, ss.157-164, 2019 (Hakemli Dergi)

108. Investigation of tensile Johnson-Cook model parameters for Nimonic 80A superalloy

Korkmaz M. E., Günay M., Verleysen P.

Journal of Alloys and Compounds , cilt.801, ss.542-549, 2019 (SCI-Expanded)

109. Estimation of Entropy Generation for Ag-MgO/Water Hybrid Nanofluid Flow through Rectangular Minichannel by Using Artificial Neural Network

Uysal C., KORKMAZ M. E.

Politeknik Dergisi , cilt.22, sa.1, ss.41-51, 2019 (Hakemli Dergi)

110. Ferritik Paslanmaz Çeliğin Malzeme Yapısal Denklem Parametrelerinin Belirlenmesi ve Doğrulanması

KORKMAZ M. E.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.7, sa.1, ss.628-639, 2019 (Hakemli Dergi)

111. Finite Element Analysis of Thrust Force in Drilling of Al2014 Aluminum Alloy Al2014 Alüminyum AlaĢımının Delinmesinde Ġtme Kuvvetinin Sonlu Elemanlar Yöntemi Ġle Analizi

Korkmaz M. E., ÇAKIROĞLU R., Yaġar N., Özmen R., Günay M.

El-Cezeri Journal of Science and Engineering , cilt.6, sa.1, ss.193-199, 2019 (Scopus)

112. Al2014 Alüminyum Alaşımının Delinmesinde İtme Kuvvetinin Sonlu Elemanlar Yöntemi İle Analizi

KORKMAZ M. E., ÇAKIROĞLU R., YAŞAR N., ÖZMEN R., GÜNAY M.

El-Cezeri Journal of Science and Engineering , cilt.6, sa.1, ss.193-199, 2019 (Scopus)

113. Identification of Constitutive Model Parameters for Nimonic 80A Superalloy

Korkmaz M. E., Verleysen P., Günay M.

Transactions of the Indian Institute of Metals , cilt.71, sa.12, ss.2945-2952, 2018 (SCI-Expanded)

114. AISI 420 Martenzitik Paslanmaz Çeliğin Delinebilirliğinin Sonlu Elemanlar Yöntemiyle Analizi

KORKMAZ M. E., MERAL T., GÜNAY M.

Gazi Mühendislik Bilimleri Dergisi , cilt.4, sa.3, ss.223-229, 2018 (Hakemli Dergi)

115. EXPERIMENTAL AND STATISTICAL ANALYSIS ON MACHINABILITY OF NIMONIC80A SUPERALLOY WITH PVD COATED CARBIDE

KORKMAZ M. E., GÜNAY M.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.36, sa.4, ss.1139-1150, 2018 (ESCI)

116. Finite Element Modelling of Cutting Forces and Power Consumption in Turning of AISI 420 Martensitic Stainless Steel

Korkmaz M. E., Günay M.

Arabian Journal for Science and Engineering , cilt.43, sa.9, ss.4863-4870, 2018 (SCI-Expanded, Scopus)

117. Finite element modeling of tool stresses on ceramic tools in hard turning

Günay M., Korkmaz M. E., Yaşar N.

Mechanika , cilt.23, sa.3, ss.432-440, 2017 (SCI-Expanded)

118. Optimization of honing parameters for renewal of cylinder liners

Günay M., Korkmaz M. E.

Gazi University Journal of Science , cilt.30, sa.1, ss.111-119, 2017 (Scopus)

119. Modelling and optimization of the surface roughness in high speed hard turning with coated and uncoated CBN insert

YURTKURAN H., Korkmaz M. E., Günay M.

Gazi University Journal of Science , cilt.29, sa.4, ss.987-995, 2016 (Scopus)

120. AISI P20 Çeliğinin İşlenmesinde Kesme Kuvvetinin Deneysel ve Nümerik Analizi

YASAR N., SEKMEN M., KORKMAZ M. E., GÜNAY M.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.4, sa.1, ss.625-631, 2016 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 47

1. FARKLI SOĞUTMA KOŞULLARI ALTINDA TORNALAMA SIRASINDA TİTANYUM ALAŞIMLARININ SÜRDÜRÜLEBİLİR TALAŞLI İMALATI: Kısa Bir İnceleme

WASTI S. M. F., KORKMAZ M. E., Gupta M. K.

7TH INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES ICAENS 2025, Türkiye, 15 - 16 Mayıs 2025, (Tam Metin Bildiri)

2. PERDAHLAMA YÖNTEMİNİN YÜZEY KALİTESİ ÜZERİNDEKİ ETKİSİ HAKKINDA DERLEME

Yeğin M., BİNALİ R., KORKMAZ M. E.

7TH INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES ICAENS 2025, Türkiye, 15 - 16 Mayıs 2025, (Tam Metin Bildiri)

3. AN UP-TO-DATE ASSESSMENT OF ENERGY CONSUMPTION IN ELECTRICAL DISCHARGE MACHINING

KORKMAZ M. E., GÜNAY M.

BALKAN 13th INTERNATIONAL CONFERENCE ON APPLIED SCIENECES, üsküp, Bosna-Hersek, 25 - 27 Nisan 2025, (Tam Metin Bildiri)

4. EKLEMELİ İMALAT PARÇALARDA SON İŞLEM YÖNTEMLERİNİN ANALİZİ

KORKMAZ M. E., GÜNAY M.

BALKAN 13th INTERNATIONAL CONFERENCE ON APPLIED SCIENECES, Bosna-Hersek, 25 - 27 Nisan 2025, (Tam Metin Bildiri)

5. Analyzing the optimum levels of machining parameters in finish turning of 25CrMo4 (EA4T) high speed railway axle steel

KORKMAZ M. E., BİNALİ R., GÜNAY M.

4th International Conference on Contemporary Academic Research, Türkiye, 22 - 23 Şubat 2025, (Tam Metin Bildiri)

6. INVESTIGATION OF THE EFFECT OF TRIM CUT APPLICATION ON SURFACE ROUGHNESS IN WIRE EROSION MACHINING OF TOOL STEEL

KOCAOĞLU E., KORKMAZ M. E., GÜNAY M.

VIII. INTERNATIONAL SCIENTIFIC RESEARCH CONGRESS, Türkiye, 28 - 30 Kasım 2024, (Tam Metin Bildiri)

7. SECONDARY PROCESSES TO IMPROVE THE MECHANICAL PROPERTIES OF PARTS PRODUCED BY METAL ADDITIVE MANUFACTURING

KORKMAZ M. E., GÜNAY M.

VIII. INTERNATIONAL SCIENTIFIC RESEARCH CONGRESS, Türkiye, 28 - 30 Kasım 2024, (Tam Metin Bildiri)

8. A BRIEF RESEARCH ON STRENGTHENING MECHANISMS IN METALS

ÖZDEMİR M. T., KORKMAZ M. E.

CUMHURIYET 12th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Türkiye, 30 - 31 Ağustos 2024, (Tam Metin Bildiri)

9. A BRIEF RESEARCH ON CEMENTATION COATING METHOD ON METALS

ÖZDEMİR M. T., KORKMAZ M. E.

CUMHURIYET 12th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Türkiye, 30 - 31 Ağustos 2024, (Tam Metin Bildiri)

10. EXPERIMENTAL AND NUMERICAL ANALYSIS OF ENERGY CONSUMPTION IN CIRCULAR SAWING

KORKMAZ M. E., GÜNAY M.

ASES VIII. INTERNATIONAL HEALTH, ENGINEERING AND SCIENCES CONFERENCE, Türkiye, 6 - 07 Nisan 2024, (Tam Metin Bildiri)

11. FINITE ELEMENT METHOD OF POWDER BED FUSION (PBF) AND DIRECTED ENERGY DEPOSITION (DED) ADDITIVE MANUFACTURING PROCESS OF BIOMEDICAL MATERIALS: A STATE-OF-THE-ART REVIEW

KORKMAZ M. E., GÜNAY M.

ASES VIII. INTERNATIONAL HEALTH, ENGINEERING AND SCIENCES CONFERENCE, Türkiye, 6 - 07 Nisan 2024, (Tam Metin Bildiri)

12. Recent Developments In Additive Manufacturing Of Metallic Biomedical Applications

GÜNAY M., KORKMAZ M. E.

ISARC 8. INTERNATIONAL PALANDÖKEN SCIENTIFIC STUDIES CONGRESS, Türkiye, 9 - 10 Mart 2024, (Tam Metin Bildiri)

13. ANALYSIS OF SURFACE ROUGHNESS DURING MACHINING OF DIN1.2885 STEEL WITH COATED AND UNCOATED CBN INSERTS

KORKMAZ M. E., GÜNAY M., DEMİR H.

ARCENG INTERNATIONAL SCIENCES CONGRESS, Türkiye, 3 - 04 Şubat 2024, (Tam Metin Bildiri)

14. MODELLING OF MACHINABILITY INDICATORS IN TURNING OF HOT WORK TOOL STEEL UNDER MQL ENVIRONMENT

GÜNAY M., KORKMAZ M. E.

ARCENG INTERNATIONAL SCIENCES CONGRESS, Türkiye, 3 - 04 Şubat 2024, (Tam Metin Bildiri)

15. Evaluation of Cutting Forces in High-Speed Turning of AA7075-T6 Aluminum Alloys: A Finite Element Modelling Study

KORKMAZ M. E., GÜNAY M.

EGE 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Türkiye, 22 - 24 Aralık 2023, (Tam Metin Bildiri)

16. PASLANMAZ ÇELİĞİN DELİNMESİNDE İTME KUVVETİ VE ÇAPAK YÜKSEKLİĞİNİN PARAMETRİK ANALİZİ VE MODELLENMESİ

GÜNAY M., KORKMAZ M. E.

EGE 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Türkiye, 22 - 24 Aralık 2023, (Tam Metin Bildiri)

17. INVESTIGATION OF THE HOLE QUALITY IN DRILLING AISI430 STEEL WITH A COATED CARBIDE DRILL

KORKMAZ M. E., GÜNAY M.

ASES VII. INTERNATIONAL HEALTH, ENGINEERING AND SCIENCES CONFERENCE NOVEMBER24-26, 2023, ISTANBUL, TURKIYE, Türkiye, 24 - 26 Kasım 2023, (Tam Metin Bildiri)

18. A Short Review on Measurement Methods in Machining of Aerospace Materials

Korkmaz M. E., Gupta M. K., Krolczyk J. B., Krolczyk G. M., Li Z., Ross N. S.

10th IEEE International Workshop on Metrology for AeroSpace, MetroAeroSpace 2023, Milan, İtalya, 19 - 21 Haziran 2023, ss.221-225, (Tam Metin Bildiri)

19. Effect of nanoparticles as a lubricants in nano-MQL machining of metallic materials: A review

Korkmaz M. E., Gupta M. K., Krolczyk G. M., Maruda R. W., Li Z.

6th International Conference on Nanotechnology for Instrumentation and Measurement, NanofIM 2021, Opole, Polonya, 25 - 26 Kasım 2021, (Tam Metin Bildiri)

20. INVESTIGATION OF THE EFFECTS OF DISC GEOMETRY ON THE INTERACTION OF Al/SiC METAL MATRIX COMPOSİTE BRAKE DISC-CAST IRON PAD

SELÇUK E., KORKMAZ M. E., GÜNAY M.

2. Uluslararası Türk Dünyası Mühendislik ve Fen Bilimleri Kongresi, 7 - 10 Kasım 2019, (Tam Metin Bildiri)

21. CFRP PLAKALARIN KAPLAMASIZ KARBÜR MATKAP İLE DELİNMESİNDE DELME PARAMETRELERİNİN ÇOKLU YANIT OPTİMİZASYONU

YAŞAR N., KORKMAZ M. E., GÜNAY M.

2. Uluslararası Türk Dünyası Mühendislik ve Fen Bilimleri Kongresi, Antalya, Türkiye, 7 - 10 Kasım 2019, (Tam Metin Bildiri)

22. DEMİRYOLU ARACININ FREN DİSKİ-BALATA ETKİLEŞİMİNE DİSK GEOMETRİSİ ETKİLERİNİN ARAŞTIRILMASI

SELÇUK E., KORKMAZ M. E., GÜNAY M.

INTERNATIONAL BLACK SEA COASTLINE COUNTRIES SYMPOSIUM-2, 20 - 22 Temmuz 2019, (Tam Metin Bildiri)

23. Numerical Investigation of Cutting Forces in Turning of C23000 Brass Alloy

KORKMAZ M. E.

International Data Science Engineering Symposium, 2 - 03 Mayıs 2019, (Tam Metin Bildiri)

24. Effects Printing Orientation on Mechanical Properties of Samples Produced by Multijet Fusion (MJF) Technology

KORKMAZ M. E., GÜNAY M.

4th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, 11 - 14 Nisan 2019, (Tam Metin Bildiri)

25. Surface roughness optimization and modeling of finishing operation for hardened X40CrMoV51 steel with ceramic tool

KORKMAZ M. E., GÜNAY M.

4th International Iron and Steel Symposium (UDCS’19), 4 - 06 Nisan 2019, (Tam Metin Bildiri)

26. Finite Element Modelling of Cutting Forces in Hard Turning of AISI 52100 Steel

KORKMAZ M. E.

4th International Iron and Steel Symposium (UDCS’19), 4 - 06 Nisan 2019, (Tam Metin Bildiri)

27. Review on Braking Systems Used in Railway Vehicles, 4rd International Symposium on Railway Systems Engineering

SELÇUK E., KORKMAZ M. E., GÜNAY M.

4th International Symposium on Railway System Engineering, 10 - 12 Ekim 2018, (Tam Metin Bildiri)

28. Estimation of machining outputs in drilling of AISI 430 stainless steel by numerical analysis

MERAL T., KORKMAZ M. E., UZUN H., GÜNAY M.

4th International Conference on Engineering and Natural Sciences, 2 - 06 Mayıs 2018, (Tam Metin Bildiri)

29. Al2014 Alüminyum Alaşımının Delinmesinde İtme Kuvvetinin Sonlu Elemanlar Yöntemi İle Analizi

KORKMAZ M. E., ÇAKIROĞLU R., YAŞAR N., ÖZMEN R., GÜNAY M.

1st International Symposium on Light Alloys and Composite Materials, 22 - 24 Mart 2018, (Tam Metin Bildiri)

30. AISI420 Çeliğinin Tornalanmasında Kesme Kuvvetlerinin Sonlu Elemanlar Yöntemi ile Analizi

KORKMAZ M. E., GÜNAY M.

1st International Turkish World Enginering and Science Congress, 7 - 10 Aralık 2017, (Tam Metin Bildiri)

31. DIN 1.2344 Takım Çeliğine Uygulanan Sert Dolgu Kaynağının İşlenebilirliğinin İncelenmesi

GÜNAY M., ÖZBEY İ., KORKMAZ M. E., UZUN G.

1st International Turkish World Enginering and Science Congress, 7 - 10 Aralık 2017, (Tam Metin Bildiri)

32. Investigation on hole quality of cutting conditions in drilling of CFRP composite

Yaşar N., Korkmaz M. E., Günay M.

21st Innovative Manufacturing Engineering and Energy International Conference, IManE and E 2017, Iasi, Romanya, 24 - 27 Mayıs 2017, cilt.112, (Tam Metin Bildiri)