Publications & Works

Publication Network
Articles 48
All (48)
SCI-E, SSCI, AHCI (29)
SCI-E, SSCI, AHCI, ESCI (30)
Scopus (30)
TRDizin (8)
Other Publications (10)

1. Risk ratio assessment of key parameters affecting main engine starting system failures on container ships

Şarkı F., Ekmekçioğlu A., Yiğit K., Savaş Ö.
OCEAN ENGINEERING , vol.349, 2026 (SCI-Expanded, Scopus)

2. Microstructural, Hardness, and Abrasive Wear Properties of Functionally Graded Al/ZrB2 Composites Produced by In Situ Centrifugal Casting

GÜNEY İ., Demirok Ö. F., BENKLİ Y. E., YÜKSEL Ç., SAVAŞ Ö.
Metals , vol.16, no.1, 2026 (SCI-Expanded, Scopus)

3. Balistik Zırh Uygulamaları İçin Al3Ti ve TiB₂ Takviyeli Fonksiyonel Derecelendirilmiş Katman İçeren Kompozitlerin Üretimi ve Karakterizayonu

Başer M. S., Savaş Ö.
, vol.9, no.9, pp.1-8, 2025 (Peer-Reviewed Journal) Creative Commons License

4. Analysis and Prediction of Electric Motor Faults, for Ships using the Taguchi Approach

Yiğit K., Ekmekçioğlu A., Savaş Ö.
Acta Polytechnica Hungarica , vol.22, no.9, pp.205-220, 2025 (SCI-Expanded, Scopus)

5. Abrasive wear behavior of functionally graded Al3Ti reinforced aluminum matrix composite

Yildiz E. T. Y., Savaş Ö., Başer M. S., Kocaman E.
China Foundry , vol.22, no.1, pp.45-54, 2025 (SCI-Expanded, Scopus)

6. Lastik Tampon ile AA1050 Alüminyum Levhalara Desen Basımı ve Proses Parametrelerinin Optimizasyonu

KILIÇ S., KOCA S., ASLANDAĞ A., YADİGAR H., SAVAŞ Ö.
Metal Dünyası Dergisi , vol.337, no.11, pp.55-85, 2024 (Peer-Reviewed Journal)

7. Corrosion Behaviour of Al/(TiB2 + -Al3Ti)-Based Functional Grade Metal Matrix Composite by Sedimentation Method

Kocaman E., Aydın H., Yiğit K., Çalışkan F., Savaş Ö.
Transactions of the Indian Institute of Metals , vol.77, no.8, pp.2153-2161, 2024 (SCI-Expanded, Scopus)

8. Kam Profillerinin Değme Analizi ve Elastohidrodinamik Yağ Filmi Kalınlığı

KESKİN ÖNER İ., SAVAŞ Ö.
Sakarya University of Applied Sciences , vol.3, no.2, pp.57-66, 2023 (Peer-Reviewed Journal)

9. ABRASIVE WEAR BEHAVIOR OF FUNCTIONALLY GRADED AIB2/AI COMPOSITE

Savaş Ö., Keskin Öner İ.
Mersin University , vol.5, no.2, pp.45-52, 2023 (Peer-Reviewed Journal)

10. Sac levhaların lastik tampon yardımıyla form verilmesi ve proses parametrelerinin Taguchi yaklaşımı ile optimizasyonunu

KILIÇ S., ÖNEN S. K., ASLANDAĞ A., KOCA S., SAVAŞ Ö.
Journal of Marine and Engineering Technology (JOINMET) , vol.2, no.2, pp.68-77, 2022 (Peer-Reviewed Journal)

11. Abrasive Wear Behavior of Centrifugally Cast Al Alloy Composites with TiB2 Reinforcement

Savaş Ö., Kılıç H.
TRIBOLOGY IN INDUSTRY , vol.0, no.0, pp.1-9, 2022 (Scopus)

12. Savurma Döküm Yöntemi ile Üretilmiş AlB2/Al Kompozit Malzemelerin Aşınma Davranışlarının İncelenmesi

Keskin Öner İ., Savaş Ö.
Journal of Marine and Engineering Technology (JOINMET) , vol.2, no.1, pp.40-49, 2022 (Peer-Reviewed Journal) Sustainable Development

13. Prediction and optimization of tribological behavior of AlB2/Al composite according to Taguchi analysis approach

Savaş Ö., Inci E.
MATERIALS LETTERS , vol.322, no.0, pp.1-4, 2022 (SCI-Expanded, Scopus)

14. PRODUCIBILITY OF FUNCTIONALLY GRADED AlB2/Al COMPOSITE MATERIAL

Savaş Ö., Karataş C.
Journal of Marine Technology and Environment , vol.1, no.1, pp.73-83, 2022 (Peer-Reviewed Journal)

15. Kaynak Uygulamaları Sonucunda Gemi Saclarında Meydana Gelen Distorsiyon ve Çarpılmaların Önlenmesine Yönelik Çalışmalar

Savaş Ö., Çırtlık S.
European Journal of Science and Technology , no.33, pp.251-257, 2022 (TRDizin)

16. Fabrication and characterization of TiB2-reinforced functionally graded aluminum matrix material

Savaş Ö.
Industrial Lubrication and Tribology , vol.72, pp.1147-1152, 2020 (SCI-Expanded, Scopus)

17. Production and properties of functionally graded hybrid composites containing Al3Ti and TiB2

Savaş Ö.
International Journal of Materials Research , vol.111, pp.726-732, 2020 (SCI-Expanded, Scopus)

18. An Experimental Study on Investigation of Abrasive Properties ofAlB2 Borid Reinforced Aluminium Matrix Composites

İNCİ E., SAVAŞ Ö.
European Journal of Science and Technology , vol.19, pp.873-880, 2020 (TRDizin) Sustainable Development

19. Fonksiyonel Derecelendirilmiş TiB2/Al Kompozitlerin Üretimi Üzerine Bir Çalışma

Savaş Ö., Demirok Ö. F.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , vol.8, no.3, pp.1829-1839, 2020 (TRDizin)

20. Application of Taguchi's method to evaluate abrasive wear behavior of functionally graded aluminum based composite

Savaş Ö.
MATERIALS TODAY COMMUNICATIONS , vol.23, 2020 (SCI-Expanded, Scopus)

21. Fonksiyonel Derecelendirilmiş Fleyk-Al3Ti/Al Kompozitlerin Üretimi ve Özelliklerinin Araştırılması

Savaş Ö., Başer M. S.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi , vol.36, no.1, pp.129-137, 2020 (TRDizin)

22. Investigation of Production and Abrasive Wear Behavior of Functionally Graded TiB2/Al and TiB2/Al–4Cu Composites

Savaş Ö.
Transactions of the Indian Institute of Metals , vol.73, pp.543-553, 2020 (SCI-Expanded, Scopus)

23. Alüminyum Ana Yapıl Fonksiyonel Derecelendirilmiş Al3Ti Takviyeli Kompozitlerin Abrasif Aşınma Davranışlarının Taguchi Yaklaşımı İle İncelenmesi

Savaş Ö., Başer S.
Bayburt Üniversitesi Fen Bilimleri Dergisi , vol.2, no.2, pp.193-200, 2019 (Peer-Reviewed Journal) Sustainable Development

24. Fonksiyonel Derecelendirilmiş TiB2/Al Kompozitlerin Abrasif Aşınma Davranışları Üzerine Deneysel Bir Çalışma

Savaş Ö., Demirok Ö. F.
European Journal of Science and Technology , vol.17, pp.972-981, 2019 (TRDizin) Creative Commons License Sustainable Development

25. The production and properties of Al3Ti reinforced functionally graded aluminum matrix composites produced by the centrifugal casting method

Savaş Ö.
MATERIALS RESEARCH EXPRESS , vol.6, no.12, 2019 (SCI-Expanded, Scopus)

26. Comparative Analysis of Ship Lighting Systems in Terms of Economic, Environmental and Material Performance

YİĞİT K., KÖKKÜLÜNK G., SAVAŞ Ö.
ACTA PHYSICA POLONICA A , vol.134, no.1, pp.189-191, 2018 (SCI-Expanded, Scopus) Creative Commons License

27. Taguchi Yaklaşımı ile içten yanmalı motorlarda segman-silindir gömleği arasındaki sürtünme katsayısının deneysel olarak incelenmesi

SAVAŞ Ö., ELÇİÇEK H., AYDIN Z.
JOURNAL OF ETA MARITIME SCIENCE , vol.6, no.1, pp.17-25, 2018 (TRDizin)

28. Experimental Investigation of Friction Coefficient Between Piston Ring-Cylinder Liner of Internal Combustion Engines with Taguchi Method

Savaş Ö., Elçiçek H., Aydın Z.
Journal of ETA Maritime Science , vol.6, pp.17-25, 2018 (TRDizin) Creative Commons License

29. Investigation of the Effects of Wear Between Piston Ring and Cylinder Liner of Internal Combustion Engines in case of Mixing of Fuel Oil into Lubricating Oil

Savaş Ö.
Journal of ETA Maritime Science , vol.5, pp.112-119, 2017 (TRDizin) Creative Commons License

30. Effects of Fuel Contamination to Marine Lubricant on Friction Behaviors between Piston Ring and Cylinder Liner

Aydın Z., Savaş Ö., Parlak A., Keskin İ., Ünlügençoğlu K.
ACTA PHYSICA POLONICA A , vol.129, no.4, pp.617-620, 2016 (SCI-Expanded, Scopus) Creative Commons License Sustainable Development

31. Corrosion Behavior of in-Situ AlB2/Al-Cu Metal Matrix Composite

Elçiçek H., Savaş Ö., Aydın Z., Özdemir O., Kayikci R.
ACTA PHYSICA POLONICA A , vol.129, pp.661-664, 2016 (SCI-Expanded, Scopus) Creative Commons License

32. Production of functionally graded SiC/Al-Cu-Mg composite by centrifugal casting

Savaş Ö., Kayikci R., Ficici F., Colak M., Deniz G., Varol F.
Science and Engineering of Composite Materials , vol.23, no.2, pp.155-159, 2016 (SCI-Expanded, Scopus)

33. Fabrication and properties of functionally graded Al/AlB2 composites

Kayikci R., Savaş Ö.
JOURNAL OF COMPOSITE MATERIALS , vol.49, pp.2029-2037, 2015 (SCI-Expanded, Scopus)

34. Application of Taguchi Method to Investigate the Effect of Nucleus Diameter on Mechanical Properties of Automotive Sheets in Electrical Resistance Spot Welding

SAVAŞ Ö.
ACTA PHYSICA POLONICA A , vol.127, no.4, pp.921-924, 2015 (SCI-Expanded, Scopus) Creative Commons License

35. Effect of some welding parameters on nugget size in electrical resistance spot welding

Savas O.
STEEL AND COMPOSITE STRUCTURES , vol.18, no.2, pp.345-355, 2015 (SCI-Expanded, Scopus)

36. Fabrication and properties of in-situ Al/AlB2 composite reinforced with high aspect ratio borides

Kayikci R., Savaş Ö.
Steel and Composite Structures , vol.19, pp.777-787, 2015 (SCI-Expanded, Scopus)

37. Experimental optimization in turning of in-situ AlB2 reinforced AlMg3 matrix composites produced by centrifugal casting method

Koksal S., Ficici F., Kayikci R., Savaş Ö.
JOURNAL OF COMPOSITE MATERIALS , vol.48, pp.1801-1812, 2014 (SCI-Expanded, Scopus)

38. Investigation of Mechanical and Dry Sliding Wear Behaviours of AlB2/PE Polymer Matrix Composites

SAVAŞ Ö., Ficici F., Kayikci R., Koksal S.
ACTA PHYSICA POLONICA A , vol.125, no.2, pp.388-390, 2014 (SCI-Expanded, Scopus) Creative Commons License

39. The Effect of Reinforcement Ratio on the Wear Behaviour of AlB2 Flake Reinforced Metal Matrix Composites

Kayikci R., Savaş Ö., Koksal S., Demir A.
ACTA PHYSICA POLONICA A , vol.125, pp.590-592, 2014 (SCI-Expanded, Scopus) Creative Commons License

40. The Effects of Different Fuels on Wear between Piston Ring and Cylinder

Cesur E., Ayhan V., Parlak A., SAVAŞ Ö., AYDIN Z.
ADVANCES IN MECHANICAL ENGINEERING , 2014 (SCI-Expanded, Scopus) Sustainable Development

41. A Taguchi optimisation for production of Al-B master alloys using boron oxide

Savaş Ö., Kayikci R.
JOURNAL OF ALLOYS AND COMPOUNDS , vol.580, pp.232-238, 2013 (SCI-Expanded, Scopus)

42. Production and wear properties of metal matrix composites reinforced with boride particles

Savaş Ö., Kayikci R.
MATERIALS & DESIGN , vol.51, pp.641-647, 2013 (SCI-Expanded, Scopus)

43. Production of Functionally Graded AlB2/Al-4Mg Composite by Centrifugal Casting

Savaş Ö., Kayıkcı R., Fıçıcı F., Köksal S.
Periodicals of Engineering and Natural Sciences (PEN) , vol.1, pp.38-43, 2013 (Peer-Reviewed Journal) Creative Commons License

44. Experimental optimization of dry sliding wear behavior of in situ AlB2/Al composite based on Taguchi's method

Koksal S., Ficici F., Kayikci R., Savas O.
MATERIALS & DESIGN , vol.42, pp.124-130, 2012 (SCI-Expanded, Scopus)

45. APPLICATION OF TAGUCHI METHOD TO INVESTIGATE THE EFFECT OF SOME FACTORS ON IN-SITU FORMED FLAKE STRUCTURES OF AL/ALB(2) COMPOSITE

Savaş Ö., Kayıkcı R., Köksal S.
ADVANCED COMPOSITES LETTERS , vol.21, no.2, pp.44-50, 2012 (SCI-Expanded, Scopus)

46. Investigation of unlubricated sliding wear behaviours of in-situ AlB 2/Al metal matrix composite

Ficici F., Koksal S., Kayikci R., Savas Ö.
Advanced Composites Letters , vol.20, pp.109-116, 2011 (SCI-Expanded, Scopus)

47. Application of Taguchi's methods to investigate some factors affecting microporosity formation in A360 aluminium alloy casting

SAVAŞ Ö., KAYIKCI R.
MATERIALS & DESIGN , vol.28, no.7, pp.2224-2228, 2007 (SCI-Expanded, Scopus)

48. Alüminyum Silisyum Alaşımlarının Dökümünde Mikro Porozite Probleminin İncelenmesi

SAVAŞ Ö., KAYIKCI R., Cüceloğlu E.
Metal Dünyası , vol.0, pp.119-123, 2005 (Peer-Reviewed Journal)
Papers Presented at Peer-Reviewed Scientific Conferences 46

1. Failure types affecting ship main engine starting systems and their evaluation

Şarkı F., Ekmekçioğlu A., Yiğit K., Savaş Ö.
14th International Artemis Scientific Research Congress, Bucuresti, Romania, 28 - 30 November 2025, pp.188-189, (Summary Text)

2. EXPERIMENTAL INVESTIGATION OF THE BALLISTIC RESISTANCE OF FUNCTIONALLY GRADED TIB₂- REINFORCED METAL MATRIX COMPOSITES1

Başer M. S., Savaş Ö.
12th International Artemis Scientific Research Congress, Bucuresti, Romania, 28 - 31 May 2025, pp.186, (Summary Text)

3. GEMİ SAÇLARININ FARKLI DENİZ ŞARTLARINDA KOROZYON DAVRANIŞLARININ İNCELENMESİ

DALGIÇOĞLU B., SAVAŞ Ö., KOCAMAN E., YİĞİT K.
ANADOLU 16TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Van, Turkey, 20 December 2024, (Summary Text)

4. Deformasyonun Sac Levhaların Titreşim Özellikleri Üzerindeki Etkisi: Logaritmik Dekreman Yöntemi ile İnceleme

KILIÇ S., MERT S., KORKMAZ F. C., SAVAŞ Ö.
BINGOL 3rd INTERNATIONAL CONFERENCE ON SOCIAL SCIENCES BINGOL 3rd INTERNATIONAL CONFERENCE ON APPLIED SCIENCES ‘’Güneş Doğudan Yükselir’’ 3 rd INTERNATIONAL GROUP EXHIBITION, Turkey, 22 November 2024, (Summary Text)

5. SEDİMANTASYON YÖNTEMİ İLE FONKSİYONEL DERECELENDİRİLMİŞ TİB2/AL-CU-Sİ KOMPOZİTLERİN ÜRETİLE BİLİRLİĞİNİN ARAŞTIRILMASI

Akyol U. A., Kocaman E., Savaş Ö.
ICSAS 2ND INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Erzurum, Turkey, 19 - 21 April 2024, pp.269-281, (Full Text) Creative Commons License

6. PRODUCTION OF ALUMINUM-BASED ZIRCONIUM DIBORIDE REINFORCED COMPOSITES ANDINVESTIGATION OF WEAR BEHAVIOR WITH TAGUCHI APPOACH

Türe S., Kocaman E., Savaş Ö.
INTERNATIONAL RESEARCH & DEVELOPMENT STUDIES AND INNOVATINON CONGRESS, Ankara, Turkey, 6 - 07 April 2024, (Summary Text)

7. PRODUCTION, CORROSION AND WEAR BEHAVIORS OF FUNCTIONALLY GRADED TIB2/Al-4%Si COMPOSITES USING IN FRIGATES AND SUBMARINES

CEVHER H., KESKİN ÖNER İ., KOCAMAN E., SAVAŞ Ö.
INTERNATIONAL RESEARCH & DEVELOPMENT STUDIES AND INNOVATINON CONGRESS, Ankara, Turkey, 6 - 07 April 2024, (Summary Text)

8. Producibility of Functionally Graded AlB2/Al Composite Material

SAVAŞ Ö., Karataş C.
Global Maritime Conference (GMC'21), İstanbul, Turkey, 17 - 18 November 2021, (Summary Text)

9. Production of TiB2/Al Composite Material for Ship Machinery Parts

Kılıç H., Başer M. S., SAVAŞ Ö.
Global Maritime Conference (GMC'21), İstanbul, Turkey, 17 - 18 November 2021, (Summary Text)

10. Investigation of Wear Behavior of Al3Ti-reinforced Aluminum Matrix Composites

Savaş Ö., Yıldız E. T. Y.
Global Maritime Conference (GMC'21), 18 - 19 November 2021, pp.57, (Summary Text)

11. Alüminyum Matrisli AlB2 Takviyeli KompozitlerinAşınma Davranışlarının İncelenmesi

KESKİN İ., SAVAŞ Ö.
2nd International Congress on Engineering and Architecture, Muğla, Turkey, 22 - 24 April 2019, pp.1814-1824, (Full Text)

12. In-situ Al3Ti Takviyeli Al-5 Si Esaslı Kompozitlerin Üretim ve Özellikleri

SAVAŞ Ö., KESKİN İ.
2nd International Congress on Engineering and Architecture, Muğla, Turkey, 22 - 24 April 2019, pp.747-757, (Full Text)

13. Examination of Depression and Anxiety Levels of Maritime Students from Yıldız Teknik University before and after their Longterm Internships

SAVAŞ Ö., Çakır B., Yılmaz İ.
3rd International Naval Architectureand Maritime Symposium, 24 - 25 April 2018, (Full Text)

14. INVESTIGATION OF AGGRESSIVE WEAR PROPERTIES OF TİB2/AI FUNCTIONAL GRADED COMPOSITES

SAVAŞ Ö., Demirok Ö., Başer S.
THIRD INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2017, 19 - 21 December 2017, pp.599-603, (Full Text)

15. PRODUCTION AND PROPERTIES OF FUNCTIONALLY GRADED Al₃Ti/Al COMPOSITE BY CENTRIFUGAL CASTING

SAVAŞ Ö., Başer S., Demirok Ö.
THIRD INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2017, 19 - 21 December 2017, pp.592-598, (Full Text)

16. THE EFFECT OF NUGGET SIZES ON MECHANICALPROPERTIES IN RESISTANCE SPOT WELDING OF TRIPSTEEL SHEETS USED IN AUTOMOTIVE INDUSTRY

FERİK E., VAROL F., SAVAŞ Ö., ÖZSARAÇ U., ASLANLAR S.
SECOND INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE: ICAS 2017, İstanbul, Turkey, 13 - 15 September 2017, pp.100-106, (Full Text)

17. ANALYZING OF MECHANICAL PROPERTIES OF BUTTJOINT FORM IN MIG-BRAZED JOINTS OF DUAL PHASESTEEL PLATES USING DIFFERENT GAS FLOW RATE

VAROL F., SAVAŞ Ö., ACAR İ., ŞIKŞIK V., ASLANLAR S.
1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Turkey, 25 - 28 April 2017, pp.142-145, (Full Text)

18. ANALYZING OF MECHANICAL PROPERTIES OFOWERLAP JOINT FORM IN MIGBRAZED JOINTS OFDUAL PHASE STEEL PLATES USING DIFFERENT GASFLOW RATES

VAROL F., SAVAŞ Ö., ACAR İ., ŞIKŞIK V., ASLANLAR S.
1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Turkey, 25 - 28 April 2017, pp.150-153, (Full Text)

19. INVESTIGATION OF MECHANICAL PROPERTIES OFOVERLAP JOINT FORM IN MIG-BRAZED JOINTS OFDP600 STEEL PLATES USING DIFFERENT ARC VOLTAGE

SAVAŞ Ö., VAROL F., ŞIKŞIK V., ACAR İ., ASLANLAR S.
1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Turkey, 25 - 28 April 2017, pp.146-149, (Full Text)

20. Comparative analysis of ship lighting systems in terms of economic, environmental and material performance

YİĞİT K., KÖKKÜLÜNK G., SAVAŞ Ö.
7th INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS EXHIBITION, 22 - 26 April 2017, pp.83, (Summary Text)

21. Modelling of Wear on a Cam Profile

KESKİN İ., PARLAK A., SAVAŞ Ö., ELÇİÇEK H.
2nd International Conference Conference on Engineering and Natural Sciences, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2413-2417, (Full Text)

22. Oxidation Behaviour of Aluminium Matrix Composites

ELÇİÇEK H., SAVAŞ Ö., KAYIKCI R., AVCI A.
6th International Advances in Applied Physics and Materials Science Congress Exhibition, 1 - 03 June 2016, (Summary Text)

23. The Effects of Contamination of Heavy Fuel Oil with Cylinder Oil on Wear Characteristic

AYDIN Z., SAVAŞ Ö., ELÇİÇEK H., PARLAK A.
6th International Advances in Applied Physics and Materials Science Congress Exhibition, 1 - 03 June 2016, (Summary Text)

24. INVESTIGATION OF SURFACE MORPHOLOGY AND ELECTROCHEMICAL CORROSION BEHAVIOUR OF ALUMINIUM COMPOSITES REINFORCED WITH HIGH ASPECT RATIO BORIDES

ELÇİÇEK H., SAVAŞ Ö., KAYIKCI R.
2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, (Summary Text)

25. Modelling of Wear on a Cam Profile

KESKİN İ., PARLAK A., SAVAŞ Ö., ELÇİÇEK H.
International Conference on Engineering and NaturalSciences (ICENS) 2016, 24 - 28 May 2016, (Full Text)

26. Investigation of Membrane Fouling Characterization for the Microfiltration Membrane using Ballast Water Treatment

ELÇİÇEK H., PARLAK A., ÇAKMAKCI M., SAVAŞ Ö.
2nd International Conference on Engineering and Natural Sciences, 24 - 28 May 2016, (Full Text)

27. Investigation of tensile shear strength of automotive sheets in electrical resistance spot welding

SAVAŞ Ö., VAROL F., ASLANLAR S.
International Conference on Engineering and Natural Sciences (ICENS) 2016, 24 - 28 May 2016, (Full Text)

28. Investigation of the Membrane Fouling Characterization for the Microfiltration Membrane using Ballast Water Treatment

ELÇİÇEK H., PARLAK A., ÇAKMAKCI M., SAVAŞ Ö.
International Conference on Engineering and Natural Sciences (ICENS) 2016, 24 - 28 May 2016, (Full Text)

29. EFFECT OF SOME WELDING PARAMETERS ON TENSILE PEEL STRENGTH OF AUTOMOTIVE SHEETS IN ELECTRICAL RESISTANCE SPOT WELDING

SAVAŞ Ö., VAROL F., ASLANLAR S.
2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 May 2016, (Full Text)

30. DETERMINATION OF OPTIMAL WELDING METHOD USED IN ALUMINUM FRAME MANUFACTURING PROCESS WITH FUZZY ANALYTICAL NETWORK PROCESS APPROACH

SAVAŞ Ö., ASLANLAR Y. S., TEKE Ç., VAROL F., GÜNEY B., ASLANLAR S.
2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 May 2016, (Full Text)

31. INVESTIGATION OF MECHANICAL PROPERTIES OF BUTT JOINT FORM IN MIG BRAZED JOINTS OF DP600 THIN ZINC COATED STEEL PLATES USING DIFFERENT BRAZING GAP

SAVAŞ Ö., VAROL F., ASLANLAR S.
2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 May 2016, (Full Text)

32. Corrosion Behaviors of AlB2 Al Metal Matrix Composites

SAVAŞ Ö., AYDIN Z., ÜNLÜGENÇOĞLU K., KAYIKCI R.
5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 19 April 2015, (Summary Text)

33. An Experimental İnvestigation On İnfluence Of Different Lubricants On Tribological Behaviour Of Cylinder Liner And Piston Ring Pair

AYDIN Z., SAVAŞ Ö., PARLAK A.
5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 18 April 2015, (Summary Text)

34. EXPERIMENTAL OPTIMIZATION OF PROCESS PARAMETERS ON RESISTANCE SPOT WELDING SHEAR STRENGTH BASED ON TAGUCHI METHOD ALL IN ONE CONFERENCES

SAVAŞ Ö., VAROL F., ASLANLAR S.
ALL IN ONE CONFERENCES, 24 - 28 March 2015, pp.100-106, (Full Text)

35. AlB2 Al Cu Kompozit Malzemelerin Abrasif Aşınma Davranışlarının İncelenmesi

FIÇICI F., KÖKSAL S., SAVAŞ Ö., KAYIKCI R.
7th International Advanced Technologies Symposium, 30 October - 01 November 2013, pp.220-223, (Full Text) Sustainable Development

36. AIB2 Al Kompozitlerin Üretim ve Özelliklerinin İncelenmesi

SAVAŞ Ö., KAYIKCI R.
7th International Advanced Technologies Symposium, 30 October - 01 November 2013, pp.216-219, (Full Text)

37. Experimental Optimization of Machinability Parameters of Polyphthalamide PPA Matrix Composite Material with 30 Glass Fiber Reinforced

FIÇICI F., SAVAŞ Ö., AYPARÇASI Z.
7th International Advanced Technologies Symposium (IATS’13), 29 October - 01 November 2013, pp.1, (Full Text)

38. Savurma Döküm Tekniğiyle Fonksiyonel Derecelendirilmiş SİC Takviyeli Alüminyum Matris Kompozit Üretimi Ve Özelliklerinin İncelenmesi

SAVAŞ Ö., KAYIKCI R., ÇOLAK M., ÇELİK Y.
14th International Materials Symposium (IMSP 2012), 10 - 12 October 2012, pp.1136-1144, (Full Text)

39. SİC Takviyeli Polimer Matrisli Kompozitlerin Üretimi Ve Özelliklerinin İncelenmesi

SAVAŞ Ö., ÇOLAK M., KAYIKCI R., FIÇICI F.
14th International Materials Symposium (IMSP2012), 10 - 12 October 2012, pp.1188-1196, (Full Text)

40. Alüminyum Anayapılı AIB2 Borür Takviyeli Kompozitlerin Döküm Yöntemi İle Üretiminin İncelenmesi

KAYIKCI R., SAVAŞ Ö., DENİZ G.
14th International Materials Symposium (IMSP 2012), 10 - 12 October 2012, pp.127-137, (Full Text)

41. Bor Oksit İlavesi ile AlB2 Al Kompozitlerin Üretiminin İncelenmesi

KAYIKCI R., SAVAŞ Ö., KURTULUŞ O.
5th International Advanced Technologies Symposium (İATS-09), 13 - 15 May 2009, pp.1011-1015, (Full Text)

42. Boroksit İlavesi İle Sentezlenen Borür Takviyeli Alüminyum Matrisli Döküm Kompozit Üretiminin İncelenmesi

KAYIKCI R., SAVAŞ Ö., KURTULUŞ O.
2nd National Boron Workshop, Turkey, 17 - 18 April 2008, pp.405-412, (Full Text)

43. AlB2 Takviyeli Alüminyum Metal Matrisli Kompozitlerin Üretilebilirliği Ve Döküm Sıcaklığının Takviye Fazı Üzerine Etkisinin İncelenmesi

KAYIKCI R., SAVAŞ Ö., KURTULUŞ O.
12th International Materials Symposium (IMSP-2008), 15 - 17 October 2008, (Full Text)

44. Investigation of factors Affecting the Extend of Microporosity in an Aluminium Casting

SAVAŞ Ö., KAYIKCI R.
International Conference on Continuous Castings of Non-Ferrous Metals, (2005), 14 - 16 November 2005, pp.36-41, (Full Text)

45. Alüminyum Alaşımlarının Dökümünde Mikro Gözenekliliği Etkileyen Faktörlerin İncelenmes

SAVAŞ Ö., KAYIKCI R.
12. Uluslararası Metalurji-Malzeme Kongresi, (2005), 28 September - 02 October 2005, (Full Text)

46. Investigation of Abrasive Wear Behavior of AlB2/Al-Cu Composite Materials

Fıçıcı f., Köksal S., SAVAŞ Ö., Kayıkcı R.
(Full Text)
Metrics

Publication

95

Publication (WoS)

30

Publication (Scopus)

30

Citation (WoS)

347

H-Index (WoS)

10

Citation (Scopus)

442

H-Index (Scopus)

11

Citation (Scholar)

249

H-Index (Scholar)

8

Citation (TrDizin)

3

H-Index (TrDizin)

1

Citation (Sum Other)

12

Total Citation Count

457

Project

14

Thesis Advisory

6

Open Access

53
UN Sustainable Development Goals
SDG 2: GOAL 2: ZERO HUNGER
SDG 3: GOAL 3: GOOD HEALTH AND WELL-BEING
SDG 7: GOAL 7: AFFORDABLE AND CLEAN ENERGY
SDG 14: GOAL 14: LIFE BELOW WATER