Prof. Dr. Ömer SAVAŞ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Corrosion Behaviour of Al/(TiB2 + -Al3Ti)-Based Functional Grade Metal Matrix Composite by Sedimentation Method

Kocaman E., Aydın H., Yiğit K., Çalışkan F., Savaş Ö.

Transactions of the Indian Institute of Metals , cilt.77, sa.8, ss.2153-2161, 2024 (SCI-Expanded)

Abrasive wear behavior of functionally graded Al3Ti reinforced aluminum matrix composite

Yildiz E. T. Y., SAVAŞ Ö., Başer M. S., Kocaman E.

China Foundry , 2024 (SCI-Expanded)

Prediction and optimization of tribological behavior of AlB2/Al composite according to Taguchi analysis approach

Savaş Ö., Inci E.

MATERIALS LETTERS , cilt.322, sa.0, ss.1-4, 2022 (SCI-Expanded)

Fabrication and characterization of TiB2-reinforced functionally graded aluminum matrix material

Savaş Ö.

Industrial Lubrication and Tribology , cilt.72, ss.1147-1152, 2020 (SCI-Expanded)

Production and properties of functionally graded hybrid composites containing Al3Ti and TiB2

Savaş Ö.

International Journal of Materials Research , cilt.111, ss.726-732, 2020 (SCI-Expanded)

Application of Taguchi's method to evaluate abrasive wear behavior of functionally graded aluminum based composite

Savaş Ö.

MATERIALS TODAY COMMUNICATIONS , cilt.23, 2020 (SCI-Expanded)

Investigation of Production and Abrasive Wear Behavior of Functionally Graded TiB2/Al and TiB2/Al–4Cu Composites

Savaş Ö.

Transactions of the Indian Institute of Metals , cilt.73, ss.543-553, 2020 (SCI-Expanded)

The production and properties of Al3Ti reinforced functionally graded aluminum matrix composites produced by the centrifugal casting method

Savaş Ö.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.12, 2019 (SCI-Expanded)

Comparative Analysis of Ship Lighting Systems in Terms of Economic, Environmental and Material Performance

YİĞİT K., KÖKKÜLÜNK G., SAVAŞ Ö.

ACTA PHYSICA POLONICA A , cilt.134, sa.1, ss.189-191, 2018 (SCI-Expanded)

Effects of Fuel Contamination to Marine Lubricant on Friction Behaviors between Piston Ring and Cylinder Liner

Aydın Z., Savaş Ö., Parlak A., Keskin İ., Ünlügençoğlu K.

ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.617-620, 2016 (SCI-Expanded)

Corrosion Behavior of in-Situ AlB2/Al-Cu Metal Matrix Composite

Elçiçek H., Savaş Ö., Aydın Z., Özdemir O., Kayikci R.

ACTA PHYSICA POLONICA A , cilt.129, ss.661-664, 2016 (SCI-Expanded)

Production of functionally graded SiC/Al-Cu-Mg composite by centrifugal casting

Savaş Ö., Kayikci R., Ficici F., Colak M., Deniz G., Varol F.

Science and Engineering of Composite Materials , cilt.23, sa.2, ss.155-159, 2016 (SCI-Expanded)

Fabrication and properties of functionally graded Al/AlB2 composites

Kayikci R., Savaş Ö.

JOURNAL OF COMPOSITE MATERIALS , cilt.49, ss.2029-2037, 2015 (SCI-Expanded)

Application of Taguchi Method to Investigate the Effect of Nucleus Diameter on Mechanical Properties of Automotive Sheets in Electrical Resistance Spot Welding

SAVAŞ Ö.

ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.921-924, 2015 (SCI-Expanded)

Effect of some welding parameters on nugget size in electrical resistance spot welding

Savas O.

STEEL AND COMPOSITE STRUCTURES , cilt.18, sa.2, ss.345-355, 2015 (SCI-Expanded)

Fabrication and properties of in-situ Al/AlB2 composite reinforced with high aspect ratio borides

Kayikci R., Savaş Ö.

Steel and Composite Structures , cilt.19, ss.777-787, 2015 (SCI-Expanded)

Experimental optimization in turning of in-situ AlB2 reinforced AlMg3 matrix composites produced by centrifugal casting method

Koksal S., Ficici F., Kayikci R., Savaş Ö.

JOURNAL OF COMPOSITE MATERIALS , cilt.48, ss.1801-1812, 2014 (SCI-Expanded)

Investigation of Mechanical and Dry Sliding Wear Behaviours of AlB2/PE Polymer Matrix Composites

SAVAŞ Ö., Ficici F., Kayikci R., Koksal S.

ACTA PHYSICA POLONICA A , cilt.125, sa.2, ss.388-390, 2014 (SCI-Expanded)

The Effect of Reinforcement Ratio on the Wear Behaviour of AlB2 Flake Reinforced Metal Matrix Composites

Kayikci R., Savaş Ö., Koksal S., Demir A.

ACTA PHYSICA POLONICA A , cilt.125, ss.590-592, 2014 (SCI-Expanded)

The Effects of Different Fuels on Wear between Piston Ring and Cylinder

Cesur E., Ayhan V., Parlak A., SAVAŞ Ö., AYDIN Z.

ADVANCES IN MECHANICAL ENGINEERING , 2014 (SCI-Expanded) Sürdürülebilir Kalkınma

A Taguchi optimisation for production of Al-B master alloys using boron oxide

Savaş Ö., Kayikci R.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.580, ss.232-238, 2013 (SCI-Expanded)

Production and wear properties of metal matrix composites reinforced with boride particles

Savaş Ö., Kayikci R.

MATERIALS & DESIGN , cilt.51, ss.641-647, 2013 (SCI-Expanded)

Experimental optimization of dry sliding wear behavior of in situ AlB2/Al composite based on Taguchi's method

Koksal S., Ficici F., Kayikci R., Savas O.

MATERIALS & DESIGN , cilt.42, ss.124-130, 2012 (SCI-Expanded)

APPLICATION OF TAGUCHI METHOD TO INVESTIGATE THE EFFECT OF SOME FACTORS ON IN-SITU FORMED FLAKE STRUCTURES OF AL/ALB(2) COMPOSITE

Savaş Ö., Kayıkcı R., Köksal S.

ADVANCED COMPOSITES LETTERS , cilt.21, sa.2, ss.44-50, 2012 (SCI-Expanded)

Investigation of unlubricated sliding wear behaviours of in-situ AlB 2/Al metal matrix composite

Ficici F., Koksal S., Kayikci R., Savas Ö.

Advanced Composites Letters , cilt.20, ss.109-116, 2011 (SCI-Expanded)

Application of Taguchi's methods to investigate some factors affecting microporosity formation in A360 aluminium alloy casting

SAVAŞ Ö., KAYIKCI R.

MATERIALS & DESIGN , cilt.28, sa.7, ss.2224-2228, 2007 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Kam Profillerinin Değme Analizi ve Elastohidrodinamik Yağ Filmi Kalınlığı

KESKİN ÖNER İ., SAVAŞ Ö.

Sakarya University of Applied Sciences , cilt.3, sa.2, ss.57-66, 2023 (Hakemli Dergi)

ABRASIVE WEAR BEHAVIOR OF FUNCTIONALLY GRADED AIB2/AI COMPOSITE

Savaş Ö., Keskin Öner İ.

Mersin University , cilt.5, sa.2, ss.45-52, 2023 (Hakemli Dergi)

Sac levhaların lastik tampon yardımıyla form verilmesi ve proses parametrelerinin Taguchi yaklaşımı ile optimizasyonunu

KILIÇ S., ÖNEN S. K., ASLANDAĞ A., KOCA S., SAVAŞ Ö.

Journal of Marine and Engineering Technology (JOINMET) , cilt.2, sa.2, ss.68-77, 2022 (Hakemli Dergi)

Abrasive Wear Behavior of Centrifugally Cast Al Alloy Composites with TiB2 Reinforcement

Savaş Ö., Kılıç H.

TRIBOLOGY IN INDUSTRY , cilt.0, sa.0, ss.1-9, 2022 (Scopus)

Savurma Döküm Yöntemi ile Üretilmiş AlB2/Al Kompozit Malzemelerin Aşınma Davranışlarının İncelenmesi

Keskin Öner İ., Savaş Ö.

Journal of Marine and Engineering Technology (JOINMET) , cilt.2, sa.1, ss.40-49, 2022 (Hakemli Dergi) Sürdürülebilir Kalkınma

PRODUCIBILITY OF FUNCTIONALLY GRADED AlB2/Al COMPOSITE MATERIAL

Savaş Ö., Karataş C.

Journal of Marine Technology and Environment , cilt.1, sa.1, ss.73-83, 2022 (Hakemli Dergi)

Kaynak Uygulamaları Sonucunda Gemi Saclarında Meydana Gelen Distorsiyon ve Çarpılmaların Önlenmesine Yönelik Çalışmalar

Savaş Ö., Çırtlık S.

European Journal of Science and Technology , sa.33, ss.251-257, 2022 (Hakemli Dergi)

An Experimental Study on Investigation of Abrasive Properties ofAlB2 Borid Reinforced Aluminium Matrix Composites

İNCİ E., SAVAŞ Ö.

European Journal of Science and Technology , cilt.19, ss.873-880, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

Fonksiyonel Derecelendirilmiş TiB2/Al Kompozitlerin Üretimi Üzerine Bir Çalışma

Savaş Ö., Demirok Ö. F.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.8, sa.3, ss.1829-1839, 2020 (Hakemli Dergi)

Fonksiyonel Derecelendirilmiş Fleyk-Al3Ti/Al Kompozitlerin Üretimi ve Özelliklerinin Araştırılması

Savaş Ö., Başer M. S.

Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi , cilt.36, sa.1, ss.129-137, 2020 (Hakemli Dergi)

Alüminyum Ana Yapıl Fonksiyonel Derecelendirilmiş Al3Ti Takviyeli Kompozitlerin Abrasif Aşınma Davranışlarının Taguchi Yaklaşımı İle İncelenmesi

Savaş Ö., Başer S.

Bayburt Üniversitesi Fen Bilimleri Dergisi , cilt.2, sa.2, ss.193-200, 2019 (Hakemli Dergi) Sürdürülebilir Kalkınma

Fonksiyonel Derecelendirilmiş TiB2/Al Kompozitlerin Abrasif Aşınma Davranışları Üzerine Deneysel Bir Çalışma

Savaş Ö., Demirok Ö. F.

European Journal of Science and Technology , cilt.17, ss.972-981, 2019 (Hakemli Dergi)

Taguchi Yaklaşımı ile içten yanmalı motorlarda segman-silindir gömleği arasındaki sürtünme katsayısının deneysel olarak incelenmesi

SAVAŞ Ö., ELÇİÇEK H., AYDIN Z.

JOURNAL OF ETA MARITIME SCIENCE , cilt.6, sa.1, ss.17-25, 2018 (Hakemli Dergi)

Experimental Investigation of Friction Coefficient Between Piston Ring-Cylinder Liner of Internal Combustion Engines with Taguchi Method

Savaş Ö., Elçiçek H., Aydın Z.

Journal of ETA Maritime Science , cilt.6, ss.17-25, 2018 (Hakemli Dergi)

Investigation of the Effects of Wear Between Piston Ring and Cylinder Liner of Internal Combustion Engines in case of Mixing of Fuel Oil into Lubricating Oil

Savaş Ö.

Journal of ETA Maritime Science , cilt.5, ss.112-119, 2017 (Hakemli Dergi)

Production of Functionally Graded AlB2/Al-4Mg Composite by Centrifugal Casting

Savaş Ö., Kayıkcı R., Fıçıcı F., Köksal S.

Periodicals of Engineering and Natural Sciences (PEN) , cilt.1, ss.38-43, 2013 (Hakemli Dergi)

Alüminyum Silisyum Alaşımlarının Dökümünde Mikro Porozite Probleminin İncelenmesi

SAVAŞ Ö., KAYIKCI R., Cüceloğlu E.

Metal Dünyası , cilt.0, ss.119-123, 2005 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

SEDİMANTASYON YÖNTEMİ İLE FONKSİYONEL DERECELENDİRİLMİŞ TİB2/AL-CU-Sİ KOMPOZİTLERİN ÜRETİLE BİLİRLİĞİNİN ARAŞTIRILMASI

Akyol U. A., Kocaman E., Savaş Ö.

ICSAS 2ND INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Erzurum, Türkiye, 19 - 21 Nisan 2024, ss.269-281

Production of TiB2/Al Composite Material for Ship Machinery Parts

Kılıç H., Başer M. S., SAVAŞ Ö.

Global Maritime Conference (GMC'21), İstanbul, Türkiye, 17 - 18 Kasım 2021

Producibility of Functionally Graded AlB2/Al Composite Material

SAVAŞ Ö., Karataş C.

Global Maritime Conference (GMC'21), İstanbul, Türkiye, 17 - 18 Kasım 2021

Investigation of Wear Behavior of Al3Ti-reinforced Aluminum Matrix Composites

Savaş Ö., Yıldız E. T. Y.

Global Maritime Conference (GMC'21), 18 - 19 Kasım 2021, ss.57

Alüminyum Matrisli AlB2 Takviyeli KompozitlerinAşınma Davranışlarının İncelenmesi

KESKİN İ., SAVAŞ Ö.

2nd International Congress on Engineering and Architecture, Muğla, Türkiye, 22 - 24 Nisan 2019, ss.1814-1824

In-situ Al3Ti Takviyeli Al-5 Si Esaslı Kompozitlerin Üretim ve Özellikleri

SAVAŞ Ö., KESKİN İ.

2nd International Congress on Engineering and Architecture, Muğla, Türkiye, 22 - 24 Nisan 2019, ss.747-757

Examination of Depression and Anxiety Levels of Maritime Students from Yıldız Teknik University before and after their Longterm Internships

SAVAŞ Ö., Çakır B., Yılmaz İ.

3rd International Naval Architectureand Maritime Symposium, 24 - 25 Nisan 2018

INVESTIGATION OF AGGRESSIVE WEAR PROPERTIES OF TİB2/AI FUNCTIONAL GRADED COMPOSITES

SAVAŞ Ö., Demirok Ö., Başer S.

THIRD INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2017, 19 - 21 Aralık 2017, ss.599-603

PRODUCTION AND PROPERTIES OF FUNCTIONALLY GRADED Al₃Ti/Al COMPOSITE BY CENTRIFUGAL CASTING

SAVAŞ Ö., Başer S., Demirok Ö.

THIRD INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2017, 19 - 21 Aralık 2017, ss.592-598

THE EFFECT OF NUGGET SIZES ON MECHANICALPROPERTIES IN RESISTANCE SPOT WELDING OF TRIPSTEEL SHEETS USED IN AUTOMOTIVE INDUSTRY

FERİK E., VAROL F., SAVAŞ Ö., ÖZSARAÇ U., ASLANLAR S.

SECOND INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE: ICAS 2017, İstanbul, Türkiye, 13 - 15 Eylül 2017, ss.100-106

INVESTIGATION OF MECHANICAL PROPERTIES OFOVERLAP JOINT FORM IN MIG-BRAZED JOINTS OFDP600 STEEL PLATES USING DIFFERENT ARC VOLTAGE

SAVAŞ Ö., VAROL F., ŞIKŞIK V., ACAR İ., ASLANLAR S.

1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.146-149

ANALYZING OF MECHANICAL PROPERTIES OF BUTTJOINT FORM IN MIG-BRAZED JOINTS OF DUAL PHASESTEEL PLATES USING DIFFERENT GAS FLOW RATE

VAROL F., SAVAŞ Ö., ACAR İ., ŞIKŞIK V., ASLANLAR S.

1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.142-145

ANALYZING OF MECHANICAL PROPERTIES OFOWERLAP JOINT FORM IN MIGBRAZED JOINTS OFDUAL PHASE STEEL PLATES USING DIFFERENT GASFLOW RATES

VAROL F., SAVAŞ Ö., ACAR İ., ŞIKŞIK V., ASLANLAR S.

1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.150-153

Comparative analysis of ship lighting systems in terms of economic, environmental and material performance

YİĞİT K., KÖKKÜLÜNK G., SAVAŞ Ö.

7th INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS EXHIBITION, 22 - 26 Nisan 2017, ss.83

Modelling of Wear on a Cam Profile

KESKİN İ., PARLAK A., SAVAŞ Ö., ELÇİÇEK H.

2nd International Conference Conference on Engineering and Natural Sciences, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2413-2417

Oxidation Behaviour of Aluminium Matrix Composites

ELÇİÇEK H., SAVAŞ Ö., KAYIKCI R., AVCI A.

6th International Advances in Applied Physics and Materials Science Congress Exhibition, 1 - 03 Haziran 2016

The Effects of Contamination of Heavy Fuel Oil with Cylinder Oil on Wear Characteristic

AYDIN Z., SAVAŞ Ö., ELÇİÇEK H., PARLAK A.

6th International Advances in Applied Physics and Materials Science Congress Exhibition, 1 - 03 Haziran 2016

Investigation of tensile shear strength of automotive sheets in electrical resistance spot welding

SAVAŞ Ö., VAROL F., ASLANLAR S.

International Conference on Engineering and Natural Sciences (ICENS) 2016, 24 - 28 Mayıs 2016

Investigation of the Membrane Fouling Characterization for the Microfiltration Membrane using Ballast Water Treatment

ELÇİÇEK H., PARLAK A., ÇAKMAKCI M., SAVAŞ Ö.

International Conference on Engineering and Natural Sciences (ICENS) 2016, 24 - 28 Mayıs 2016

INVESTIGATION OF SURFACE MORPHOLOGY AND ELECTROCHEMICAL CORROSION BEHAVIOUR OF ALUMINIUM COMPOSITES REINFORCED WITH HIGH ASPECT RATIO BORIDES

ELÇİÇEK H., SAVAŞ Ö., KAYIKCI R.

2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016

Investigation of Membrane Fouling Characterization for the Microfiltration Membrane using Ballast Water Treatment

ELÇİÇEK H., PARLAK A., ÇAKMAKCI M., SAVAŞ Ö.

2nd International Conference on Engineering and Natural Sciences, 24 - 28 Mayıs 2016

Modelling of Wear on a Cam Profile

KESKİN İ., PARLAK A., SAVAŞ Ö., ELÇİÇEK H.

International Conference on Engineering and NaturalSciences (ICENS) 2016, 24 - 28 Mayıs 2016

EFFECT OF SOME WELDING PARAMETERS ON TENSILE PEEL STRENGTH OF AUTOMOTIVE SHEETS IN ELECTRICAL RESISTANCE SPOT WELDING

SAVAŞ Ö., VAROL F., ASLANLAR S.

2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 Mayıs 2016

INVESTIGATION OF MECHANICAL PROPERTIES OF BUTT JOINT FORM IN MIG BRAZED JOINTS OF DP600 THIN ZINC COATED STEEL PLATES USING DIFFERENT BRAZING GAP

SAVAŞ Ö., VAROL F., ASLANLAR S.

2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 Mayıs 2016

DETERMINATION OF OPTIMAL WELDING METHOD USED IN ALUMINUM FRAME MANUFACTURING PROCESS WITH FUZZY ANALYTICAL NETWORK PROCESS APPROACH

SAVAŞ Ö., ASLANLAR Y. S., TEKE Ç., VAROL F., GÜNEY B., ASLANLAR S.

2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 Mayıs 2016

Corrosion Behaviors of AlB2 Al Metal Matrix Composites

SAVAŞ Ö., AYDIN Z., ÜNLÜGENÇOĞLU K., KAYIKCI R.

5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 19 Nisan 2015

An Experimental İnvestigation On İnfluence Of Different Lubricants On Tribological Behaviour Of Cylinder Liner And Piston Ring Pair

AYDIN Z., SAVAŞ Ö., PARLAK A.

5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 18 Nisan 2015

EXPERIMENTAL OPTIMIZATION OF PROCESS PARAMETERS ON RESISTANCE SPOT WELDING SHEAR STRENGTH BASED ON TAGUCHI METHOD ALL IN ONE CONFERENCES

SAVAŞ Ö., VAROL F., ASLANLAR S.

ALL IN ONE CONFERENCES, 24 - 28 Mart 2015, ss.100-106

AlB2 Al Cu Kompozit Malzemelerin Abrasif Aşınma Davranışlarının İncelenmesi

FIÇICI F., KÖKSAL S., SAVAŞ Ö., KAYIKCI R.

7th International Advanced Technologies Symposium, 30 Ekim - 01 Kasım 2013, ss.220-223 Sürdürülebilir Kalkınma

AIB2 Al Kompozitlerin Üretim ve Özelliklerinin İncelenmesi

SAVAŞ Ö., KAYIKCI R.

7th International Advanced Technologies Symposium, 30 Ekim - 01 Kasım 2013, ss.216-219

Experimental Optimization of Machinability Parameters of Polyphthalamide PPA Matrix Composite Material with 30 Glass Fiber Reinforced

FIÇICI F., SAVAŞ Ö., AYPARÇASI Z.

7th International Advanced Technologies Symposium (IATS’13), 29 Ekim - 01 Kasım 2013, ss.1

Savurma Döküm Tekniğiyle Fonksiyonel Derecelendirilmiş SİC Takviyeli Alüminyum Matris Kompozit Üretimi Ve Özelliklerinin İncelenmesi

SAVAŞ Ö., KAYIKCI R., ÇOLAK M., ÇELİK Y.

14th International Materials Symposium (IMSP 2012), 10 - 12 Ekim 2012, ss.1136-1144

AlB2 Takviyeli Alüminyum Metal Matrisli Kompozitlerin Üretilebilirliği Ve Döküm Sıcaklığının Takviye Fazı Üzerine Etkisinin İncelenmesi

KAYIKCI R., SAVAŞ Ö., KURTULUŞ O.

12th International Materials Symposium (IMSP-2008), 15 - 17 Ekim 2008

Metrikler

Yayın

Atıf (WoS)

283

H-İndeks (WoS)

Atıf (Scopus)

400

H-İndeks (Scopus)

Atıf (Scholar)

238

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Tez Danışmanlığı

Açık Erişim